## Overview
-This docker-compose file starts a pre-configured, self-contained SDN-R solution
+This docker-compose file starts a pre-configured, self-contained SDN-R solution
for developer test or demo purposes
* **Identity**
- ... representing an KeyCloak based identity service for centralized user
- management. Please note that the implementation does not support IPv6.
+ ... representing an KeyCloak based identity service for centralized user
+ management. Please note that the implementation does not support IPv6.
Therefore, its own network is required called 'DMZ'.
+ In this configuration the external https port is 8463.
* **SDN-R** single node instance
- ... representing the NetConf consumer on the Service Management and
- Orchestration framework (SMO) for the O1 interface based on
+ ... representing the NetConf consumer on the Service Management and
+ Orchestration framework (SMO) for the O1 interface based on
ODL-Silicon/ONAP-Istanbul
+ SDN-R comes with is own web-portal the external port is 8463.
* **VES collector**
- ... representing the VES (REST) provider at SMO for all kind of events.
+ ... representing the VES (REST) provider at SMO for all kind of events. In this configuration the external https port is 8443.
* **DMaaP**
... representing SMO DMaaP component, includes message-router
+ * **ONAP-Policy**
+ ... representing all the components of ONAP policy framework, in particular
+ the policy-apex-pdp which executes the apex policies deployed in the framework
+ when a certain event occurs.
+
+ * **Non-RT-RIC**
+ ... representing all the components of Non-RT-RIC, includes Non-RT-RIC Control Panel, Non-RT-RIC (Spring Cloud) Service Gateway, A1 Policy Management Services,
+ Enrichment Data Coordinator, Non-RT-RIC App Catalogue, "HelloWorld" O-RU Fronthaul Recovery use-case, Near-RT RIC A1 Simulator etc.
+
## Prerequisites
```
PRETTY_NAME="Ubuntu 20.04.2 LTS"
$ docker --version
-Docker version 20.10.2, build 20.10.2-0ubuntu1~20.04.2
+Docker version 20.10.7, build 20.10.7-0ubuntu1~20.04.2
$ docker-compose version
docker-compose version 1.29.1, build c34c88b2
CPython version: 3.7.10
OpenSSL version: OpenSSL 1.1.0l 10 Sep 2019
+
$ git --version
git version 2.25.1
<deployment-system-ipv4> identity <your-system>
```
+It is beneficial (but not mandatory) adding the following line add the
+end of your ~/.bashrc file. I will suppress warnings when python script
+do not verify self signed certificates for HTTPS communication.
+```
+export PYTHONWARNINGS="ignore:Unverified HTTPS request"
+```
+
## Expected Folder Structure
```
│ ├── kafka
│ └── zookeeper
├── non-rt-ric
- │ ├── .env
│ ├── docker-compose.yml
│ │
- │ └── <config-folders>
- └── oam
+ │ ├── test
+ │ ├── data
+ │ └── config
+ ├── oam
+ │ ├── docker-compose.yml
+ │ │
+ │ ├── sdnc-web
+ │ ├── sdnr
+ │ └── ves-collector
+ └── onap-policy
├── docker-compose.yml
│
- ├── sdnc-web
- ├── sdnr
- └── ves-collector
+ ├── config
+ └── wait_for_port.sh
```
## Usage
nano network/.env
```
+The tested configuration uses the following external https ports:
+
+ * 8443 for the ves-collector
+ * 8453 for web access to ODLUX (SDNC_WEB_PORT)
+ * 8463 for the keyclock web administrator user interface.
+
#### Startup solution
Please note that it is necessary to configure first the identity service,
The several docker-compose yml files must be started in the right order as listed below:
```
-docker-compose -f smo/common/docker-compose.yml up -d
-python smo/common/identity/config.py
+docker-compose -f smo/common/docker-compose.yml up -d
+python smo/common/identity/config.py
```
The python script configure the users within the identity service (keycloak).
A system user (%USER) is also created with administration rights.
```
-docker-compose -f smo/non-rt-ric/docker-compose.yml up -d
-docker-compose -f smo/oam/docker-compose.yml up -d
+docker-compose -f smo/onap-policy/docker-compose.yml up -d
+docker-compose -f smo/oam/docker-compose.yml up -d
+docker-compose -f smo/non-rt-ric/docker-compose.yml up -d
```
+In order to create/deploy the apex policy for O-RU closed loop recovery usecase,
+refer to the section named "Create/Deploy apex policy for O-RU & O-DU use case" in
+this page:
+https://wiki.o-ran-sc.org/pages/viewpage.action?pageId=35881325
+
+Please note that the above instructions assume that the ToscaPolicy.json file
+with default config needs to be deployed. However, when there is a need to update
+the config (for example, to change the O-RU to O-DU mapping), a new ToscaPolicy.json
+file needs to be created. Refer to the section named "Workflow for updating the policy config"
+in this page:
+https://wiki.o-ran-sc.org/pages/viewpage.action?pageId=35881325
+
Please wait about 2min until all the service are up and running.
If you see the login page (https://sdnc-web:8453) you are good to go and can start the (simulated) network.
+### populate data into Non-RT-RIC
+
+Full instrucion on how to run Non-RT-RIC can be found in this page:
+<https://wiki.o-ran-sc.org/display/RICNR/Release+D>
+
+When containers in Non-RT-RIC are all up, by default, there is no data running inside. Folder `non-rt-ric/data/` contains serveral scripts to populate data into Non-RT-RIC for test & demo purpose.
+
+```
+bash prepareDmaapMsg.sh
+```
+
+script `prepareDmaapMsg.sh` sends messages to dmaap message router, then Non-RT-RIC policy-agent service polls messages from dmaap, and creates policy instances accordingly.
+
+```
+bash preparePmsData.sh
+```
+
+script `preparePmsData.sh` sends http requests to policy-agent service, and creates policy instances accordingly.
+
+```
+bash prepareEcsData.sh
+```
+
+script `prepareIcsData.sh` sends http requests to ics service, and creates data accordingly.
+
+Afterwards, open webpage:
+<http://localhost:8182/>
+Now we should see some data in the page.
+
```
-docker-compose -f network/docker-compose.yml up -d
+docker-compose -f network/docker-compose.yml up -d
```
Usually the first ves:event gets lost. Please restart the O-DU docker container(s) to send a second ves:pnfRegistration.
```
docker-compose -f network/docker-compose.yml restart ntsim-ng-o-du-1122
-python network/config.py
+python network/config.py
```
The python script configures the simulated O-DU and O-RU according to O-RAN hybrid architecture.
![ves:pnfRegistration in ODLUX](docs/nstim-ng-connected-after-ves-pnf-registration-in-odlux.png "ves:pnfRegistration in ODLUX")
'True' indicated that the settings through SDN-R to the NETCONF server were
-successful.
+successful.
-SDN-R reads the fault events from DMaaP and processes them.
+SDN-R reads the fault events from DMaaP and processes them.
Finally the fault events are visible in ODLUX.
![ves:fault in ODLUX](docs/ves-fault-in-odlux.png "ves:fault in ODLUX")
docker logs -f ves-collector
```
+#### onap-policy apex logs
+
+```
+docker logs policy-apex-pdp
+```
+
+#### Non-RT-RIC logs
+
+```
+docker logs policy-agent
+docker logs oru-app
+docker logs ecs
+```
+
### Customizing Solution
'.env' file contains customizing parameters
https://sdnc-web:8453
User: admin // see .env file
-
+
Password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
In case of trouble, please update the commands with your customized '.env' file.
To stop all container please respect the following order
```
-docker-compose -f network/docker-compose.yml down
-docker-compose -f smo/oam/docker-compose.yml down
-docker-compose -f smo/non-rt-ric/docker-compose.yml down
-docker-compose -f smo/common/docker-compose.yml down
+docker-compose -f network/docker-compose.yml down
+docker-compose -f smo/oam/docker-compose.yml down
+docker-compose -f smo/onap-policy/docker-compose.yml down
+docker-compose -f smo/non-rt-ric/docker-compose.yml down
+docker-compose -f smo/common/docker-compose.yml down
```
### Cleanup