-# ORAN SMO Package
+# O-RAN SMO Package
This project uses different helm charts from different Linux Foundation projects and integrate them into a unique SMO deployment.
<p>The ONAP and ORAN project helm charts are built and then configured by using "helm override" so that it represents a valid ORAN SMO installation.</p>
-<p>It contains also provisioning scripts that can be used to bootstrap the platform and execute test usecases, network simulators, a1 simulators, cnf network simulators, etc ...</p>
+<p>It contains also provisioning scripts that can be used to bootstrap the platform and execute test use cases, network simulators, a1 simulators, cnf network simulators, etc ...</p>
<strong>Note:</strong>
The CNF part is still a "work in progress" so not well documented, it's a DU/RU/topology server deployment done by ONAP SO instantiation.
-It has been created out of the ONAP vfirewall usecase.
+It has been created out of the ONAP vfirewall use case.
## Quick Installation on blank node
-* Setup a VM with 40GB Memory, 6VCPU, 60GB of diskspace.
+* Setup a VM with 40GB Memory, 6VCPU, 60GB of disk space.
* Install an ubuntu live server 20.04 LTS (https://releases.ubuntu.com/20.04/ubuntu-20.04.3-live-server-amd64.iso)
* Install snap and restart the shell session: sudo apt-get install snapd -y
* Execute the following commands being logged as root:
```git clone --recursive https://github.com/sebdet/oran-deployment.git```
- ```./oran-deployment/scripts/layer-0/0-setup-microk8s.sh```
+ ```./dep/smo-install/scripts/layer-0/0-setup-microk8s.sh```
- ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh```
-
- ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh```
-
- ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh```
+ ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh```
- ```./oran-deployment/scripts/layer-2/2-install-oran.sh```
+ ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh```
+
+ ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh```
+
+ ```./dep/smo-install/scripts/layer-2/2-install-oran.sh```
Verify pods:
```kubectl get pods -n onap && kubectl get pods -n nonrtric```
-
+
When all pods in "onap" and "nonrtric" namespaces are well up & running:
-
- ```./oran-deployment/scripts/layer-2/2-install-simulators.sh```
+
+ ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh```
## Quick Installation on existing kubernetes
-* Ensure you have at least 20GB Memory, 6VCPU, 60GB of diskspace.
-* Execute the following commands being logged as root:
+* Ensure you have at least 20GB Memory, 6VCPU, 60GB of disk space.
+
+ ```git clone --recursive "https://gerrit.o-ran-sc.org/r/it/dep"```
+
+ ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh```
- ```git clone --recursive git@github.com:gmngueko/oran-deployment.git```
+ ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh```
- ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh```
-
- ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh```
-
- ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh```
+ ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh```
- ```./oran-deployment/scripts/layer-2/2-install-oran.sh```
+ ```./dep/smo-install/scripts/layer-2/2-install-oran.sh```
+
+ Verify pods:
+
+ ```kubectl get pods -n onap && kubectl get pods -n nonrtric```
+
+ When all pods in "onap" and "nonrtric" namespaces are well up & running:
+
+ ```./smo-install/scripts/layer-2/2-install-simulators.sh```
Verify pods:
```kubectl get pods -n onap && kubectl get pods -n nonrtric```
-
+
When all pods in "onap" and "nonrtric" namespaces are well up & running:
-
- ```./oran-deployment/scripts/layer-2/2-install-simulators.sh```
+
+ ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh```
## Structure
│ ├── layer-2 <--- Scripts to install SMO package
│ │ ├── 2-install-nonrtric-only.sh <--- Install SMO NONRTRIC k8s namespace only
│ │ ├── 2-install-oran-cnf.sh <--- Install SMO full with ONAP CNF features
-│ │ ├── 2-install-oran.sh <--- Install SMO minimal
+│ │ ├── 2-install-oran.sh <--- Install SMO minimal
│ │ └── 2-install-simulators.sh <--- Install Network simulator (RU/DU/Topology Server)
│ │ └── 2-upgrade-simulators.sh <--- Upgrade the simulators install at runtime when changes are done on override files
│ ├── sub-scripts <--- Sub-Scripts used by the main layer-0, layer-1, layer-2
<strong>Note:</strong> The current repository has multiple sub git submodules, therefore the <strong>--recursive</strong> flag is absolutely <strong>REQUIRED</strong>
-
+
## Requirements:
* K8S node setup with Helm 3 and Kubectl properly configured (tested with <strong>K8S v1.21.5</strong> and <strong>HELM v3.5.4</strong>).
FOR K8S installation, multiple options are available:
- MicroK8S standalone deployment:
- ```./oran-deployment/scripts/layer-0/0-setup-microk8s.sh```
+ ```./dep/smo-install/scripts/layer-0/0-setup-microk8s.sh```
OR this wiki can help to setup it (<strong>Section 1, 2 and 3</strong>): https://wiki.onap.org/display/DW/Deploy+OOM+and+SDC+%28or+ONAP%29+on+a+single+VM+with+microk8s+-+Honolulu+Setup
- - KubeSpray using ONAP multicloud KUD (https://git.onap.org/multicloud/k8s/tree/kud) installation by executing(this is required for ONAP CNF deployments):
-
- ```./oran-deployment/scripts/layer-0/0-setup-kud-node.sh```
-
+ - KubeSpray using ONAP multicloud KUD (https://git.onap.org/multicloud/k8s/tree/kud) installation by executing(this is required for ONAP CNF deployments):
+
+ ```./dep/smo-install/scripts/layer-0/0-setup-kud-node.sh```
+
- Use an existing K8S installation (Cloud, etc ...).
- ....
* ChartMuseum to store the HELM charts on the server, multiple options are available:
- Execute the install script:
- ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh```
-
- ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh```
+ ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh```
+
+ ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh```
- Install chartmuseum manually on port 18080 (https://chartmuseum.com/#Instructions, https://github.com/helm/chartmuseum)
-
+
## Configuration:
-In the ./helm-override/ folder the helm config that are used by the SMO installation.
+In the ./helm-override/ folder the helm config that are used by the SMO installation.
<p>Different flavors are preconfigured, and should NOT be changed unless you intentionally want to updates some configurations.
## Installation:
-* Build ONAP/ORAN charts
+* Build ONAP/ORAN charts
- ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh```
+ ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh```
* Choose the installation:
- - ONAP + ORAN "nonrtric" <strong>(RECOMMENDED ONE)</strong>:
-
- ```./oran-deployment/scripts/layer-2/2-install-oran.sh```
- - ORAN "nonrtric" par only:
-
- ```./oran-deployment/scripts/layer-2/2-install-nonrtric-only.sh```
+ - ONAP + ORAN "nonrtric" <strong>(RECOMMENDED ONE)</strong>:
+
+ ```./dep/smo-install/scripts/layer-2/2-install-oran.sh```
+ - ORAN "nonrtric" part only(To work with ONAP):
- - ONAP CNF + ORAN "nonrtric" (This must still be documented properly):
+ ```./dep/smo-install/scripts/layer-2/2-install-nonrtric-only.sh```
- ```./oran-deployment/scripts/layer-2/2-install-oran-cnf.sh```
+ - ORAN "nonrtric" standalone:
+
+ ```./dep/smo-install/scripts/layer-2/2-install-nonrtric-only.sh standalone-nonrtric```
+
+ - ONAP CNF + ORAN "nonrtric" (This must still be documented properly):
+
+ ```./dep/smo-install/scripts/layer-2/2-install-oran-cnf.sh```
* Install the network simulators (DU/RU/Topo):
- When all pods in "onap" and "nonrtric" namespaces are well up & running:
-
+
```kubectl get pods -n onap && kubectl get pods -n nonrtric```
- Execute the install script:
-
- ```./oran-deployment/scripts/layer-2/2-install-simulators.sh```
+
+ ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh```
- Check the simulators status:
```kubectl get pods -n network```
- Note: The simulators topology can be customized in the file ./oran-deployment/helm-override/network-simulators-topology-override.yaml
+ Note: The simulators topology can be customized in the file ./smo-install/helm-override/network-simulators-topology-override.yaml
## Platform access points:
-* SDNR WEB:
+* SDNR WEB:
https://<K8SServerIP>:30205/odlux/index.html
-* NONRTRIC Dashboard:
+* NONRTRIC Dashboard:
http://<K8SServerIP>:30091/
More to come ...
## Uninstallation:
-* Execute
-
- ```./oran-deployment/scripts/uninstall-all.sh```
+* Execute
+
+ ```./dep/smo-install/scripts/uninstall-all.sh```