+++ /dev/null
-#!/usr/bin/env bash
-# vim: ts=4 sw=4 noet:
-#----------------------------------------------------------------------------------
-#
-# Copyright (c) 2018-2019 AT&T Intellectual Property.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#---------------------------------------------------------------------------------
-
-
-# ----------------------------------------------------------------------
-# Mnemonic: verify.sh
-# Abstract: Simple script to attempt to verify that the mc_listener is
-# capable of running. This will start a listener and a sender
-# and then will cat a few lines from one of the FIFOs.
-# This script is designed to run using the geneated runtime
-# image; in other words, it expects to find the binaries
-# in /playpen/bin.
-#
-# Date: 26 August 2019
-# Author: E. Scott Daniels
-# ----------------------------------------------------------------------
-
-# set the various sleep values based on long test or short test
-function set_wait_values {
- if (( long_test ))
- then
- export MCL_RDC_FREQ=13 # file cycle after 13s
- sender_wait=100
- listener_wait=105
- reader_wait=102
- main_wait=120
- else
- sender_wait=10
- listener_wait=15
- reader_wait=12
- main_wait=20
- fi
-}
-
-# run sender at a 2 msg/sec rate (500000 musec delay)
-# sender sends msg types 0-6 and the route table in /tmp
-# will direct them to the listener. We also need to switch
-# the RT listen port so there is no collision with the listen
-# preocess.
-#
-function run_sender {
- echo "starting sender"
- RMR_SEED_RT=/tmp/local.rt RMR_RTG_SVC=9989 /playpen/${si}bin/sender 43086 10000 >/tmp/sender.log 2>&1 &
- spid=$!
- sleep $sender_wait
-
- echo "stopping sender"
- kill -15 $spid
-}
-
-function run_listener {
- echo "starting listener"
- /playpen/${si}bin/mc_listener $ext_hdr -r 1 -d $fifo_dir >/tmp/listen.log 2>&1 &
- lpid=$!
-
- sleep $listener_wait
- echo "stopping listener"
- kill -15 $lpid
-}
-
-# run a pipe reader for one message type
-function run_pr {
- echo "starting pipe reader $1"
- /playpen/bin/pipe_reader $ext_hdr -m $1 -d $fifo_dir >/tmp/pr.$1.log 2>&1 &
- #/playpen/bin/pipe_reader -m $1 -d $fifo_dir & # >/tmp/pr.$1.log 2>&1
- typeset prpid=$!
-
- sleep $reader_wait
- echo "stopping pipe reader $1"
- kill -1 $prpid
-}
-
-# generate a dummy route table that the sender needs
-function gen_rt {
- cat <<endKat >/tmp/local.rt
- newrt|start
- mse | 0 | -1 | localhost:4560
- mse | 1 | -1 | localhost:4560
- mse | 2 | -1 | localhost:4560
- mse | 3 | -1 | localhost:4560
- mse | 4 | -1 | localhost:4560
- mse | 5 | -1 | localhost:4560
- mse | 6 | -1 | localhost:4560
- newrt|end
-endKat
-}
-
-# ---- run everything ---------------------------------------------------
-
-si="" # if -s given then we add this to sender/listener to run SI95 versions
-ext_hdr="" # run with extended header enabled (-e turns extended off)
-long_test=0
-raw_capture=1
-while [[ $1 == -* ]]
-do
- case $1 in
- -l) long_test=1;;
- -n) raw_capture=0;;
- -s) si="si_";;
- *) echo "$1 is not a recognised option"
- exit 1
- ;;
- esac
-
- shift
-done
-
-set_wait_values
-
-if (( ! raw_capture )) # -n set, turn off capture
-then
- export MCL_RDC_ENABLE=0
-fi
-
-if [[ -d /data/final ]] # assume if we find data that final directory goes here
-then
- echo "### found /data/final using that as final directory"
- export MCL_RDC_FINAL=/data/final
-fi
-
-if [[ -d /data/stage ]]
-then
- echo "### found /data/staging using that as stage directory"
- export MCL_RDC_STAGE=/data/stage
-fi
-final_dir=${MCL_RDC_FINAL:-/tmp/rdc/final}
-stage_dir=${MCL_RDC_STAGE:-/tmp/rdc/stage}
-
-fifo_dir=/tmp/fifos
-mkdir -p $fifo_dir # redirect fifos so we don't depend on mount
-
-gen_rt # generate a dummy route table
-run_listener &
-sleep 4
-
-for p in 0 1 2 3 4 5 6
-do
- run_pr $p &
-done
-sleep 1
-run_sender &
-
-sleep $main_wait # long enough for all functions to finish w/o having to risk a wait hanging
-echo "all functions stopped; looking at logs"
-
-# ---------- validation -------------------------------------------------
-
-errors=0
-
-# logs should be > 0 in size
-echo "----- logs ---------"
-ls -al /tmp/*.log
-
-# pipe reader log files 1-6 should have 'stand up and cheer' messages
-# pipe reader log for MT 0 will likley be empty as sender sends only
-# one of those and buffer not likely flushed. So, we only check 1-6
-#
-for l in 1 2 3 4 5 6
-do
- if [[ ! -s /tmp/pr.$l.log ]]
- then
- echo "[FAIL] log $l was empty"
- (( errors++ ))
- else
- if ! grep -q -i "stand up and cheer" /tmp/pr.$l.log
- then
- echo "[FAIL] pipe reader log did not have any valid messages: /tmp/pr.$l.log"
- (( errors++ ))
- fi
- fi
-done
-
-if (( ! errors ))
-then
- echo "[OK] All logs seem good"
-fi
-
-nfifos=$( ls /tmp/fifos/MT_* | wc -l )
-if (( nfifos < 7 ))
-then
- echo "didn't find enough fifos"
- ls -al /tmp/fifos/*
- (( errors++ ))
-else
- echo "[OK] Found expected fifos"
-fi
-
-if (( raw_capture )) # not an error if not capturing
-then
- if [[ -d $stage_dir ]]
- then
- echo "[OK] Found staging direcory ($stage_dir)"
- ls -al $stage_dir
- else
- (( errors++ ))
- echo "[FAIL] No staging directory found ($stage_dir)"
- fi
-
-
- if [[ -d $final_dir ]]
- then
- echo "[OK] Found final direcory ($final_dir)"
- ls -al $final_dir
-
- if (( long_test )) # look for files in final dir to ensure roll
- then
- found=$( ls $final_dir/MC* | wc -l )
- if (( found > 0 ))
- then
- echo "[OK] Found $found files in final directory ($final_dir)"
- else
- echo "[FAIL] Did not find any files in the final directory ($final_dir)"
- (( errors++ ))
- fi
- fi
- else
- (( errors++ ))
- echo "[FAIL] No final directory found"
- fi
-fi
-
-if (( errors ))
-then
- echo "[FAIL] $errors errors noticed"
-else
- echo "[PASS]"
-fi
-
Code Review / ric-app / mc.git / blobdiff