#!/bin/bash
+#
+# Copyright (C) 2019 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Ensure we fail the job if any steps fail.
+set -e -o pipefail
+
+SUPPORTED_BSP="intel-x86-64 nxp-lx2xxx"
+WRTEMPLATE_COMMON="feature/oran-host-rt-tune feature/kubernetes feature/self-hosted"
+WRTEMPLATE_X86="feature/hosts-ia feature/kvm feature/dpdk"
+
+SRC_ORAN_BRANCH="master"
+SRC_WRL_BRANCH="WRLINUX_10_18_BASE"
+SRC_WRL_URL="git://github.com/WindRiver-Labs/wrlinux-x.git"
+
+SCRIPTS_DIR=$(dirname $(readlink -f $0))
help_info () {
cat << ENDHELP
Usage:
-$(basename $0) <-w WORKSPACE_DIR> [-n] [-h]
+$(basename $0) <-w WORKSPACE_DIR> [-b BSP] [-n] [-h] [-r]
where:
-w WORKSPACE_DIR is the path for the project
+ -b BPS is one of supported BSP: "${SUPPORTED_BSP}"
+ (default is intel-x86-64 if not specified.)
-n dry-run only for bitbake
-h this help info
-e EXTRA_CONF is the pat for extra config file
+ -r whether to inherit rm_work (default is Yes)
ENDHELP
}
exit
fi
+check_yn_rm_work () {
+ yn="$1"
+ case ${yn} in
+ [Yy]|[Yy]es)
+ RM_WORK="Yes"
+ ;;
+ [Nn]|[Nn]o)
+ RM_WORK="No"
+ ;;
+ *)
+ echo "Invalid arg for -r option."
+ help_info
+ exit 1
+ ;;
+ esac
+}
+
+check_valid_bsp () {
+ bsp="$1"
+ for b in ${SUPPORTED_BSP}; do
+ if [ "${bsp}" == "${b}" ]; then
+ BSP_VALID="${bsp}"
+ break
+ fi
+ done
+ if [ -z "${BSP_VALID}" ]; then
+ echo_error "${bsp} is not a supported BSP, the supported BSPs are: ${SUPPORTED_BSP}"
+ exit 1
+ fi
+}
+
DRYRUN=""
EXTRA_CONF=""
+RM_WORK="Yes"
+BSP="intel-x86-64"
+IMAGE_TYPE="iso"
-SCRIPTS_DIR=`dirname $0`
-SCRIPTS_DIR=`readlink -f $SCRIPTS_DIR`
-
-while getopts "w:e:nh" OPTION; do
+while getopts "w:b:e:r:nh" OPTION; do
case ${OPTION} in
w)
WORKSPACE=`readlink -f ${OPTARG}`
;;
+ b)
+ check_valid_bsp ${OPTARG}
+ ;;
e)
EXTRA_CONF=`readlink -f ${OPTARG}`
- ;;
+ ;;
n)
DRYRUN="-n"
;;
+ r)
+ check_yn_rm_work ${OPTARG}
+ ;;
h)
help_info
exit
esac
done
-if [ -z ${WORKSPACE} ]; then
+if [ -z "${WORKSPACE}" ]; then
echo_info "No workspace specified, a directory 'workspace' will be created in current directory as the workspace"
WORKSPACE=`readlink -f workspace`
fi
-SRC_WRL_DIR=${WORKSPACE}/src_wrl1018
+if [ -n "${BSP_VALID}" ]; then
+ BSP="${BSP_VALID}"
+fi
+
+# iso image is not supported by nxp-lx2xxx yet
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+ IMAGE_TYPE="tar.bz2"
+fi
+
+SRC_WRL_DIR=${WORKSPACE}/src_wrlinux
SRC_ORAN_DIR=${WORKSPACE}/src_oran
PRJ_BUILD_DIR=${WORKSPACE}/prj_oran-inf
mkdir -p ${SRC_WRL_DIR} ${PRJ_BUILD_DIR} ${SRC_ORAN_DIR}
echo_info "The following directories are created in your workspace(${WORKSPACE}):"
-echo_info "For wrlinux1018 source: ${SRC_WRL_DIR}"
+echo_info "For wrlinux source: ${SRC_WRL_DIR}"
echo_info "For oran layer source: ${SRC_ORAN_DIR}"
echo_info "For build project: ${PRJ_BUILD_DIR}"
-# Clone the source of WRLinux BASE 10.18 from github and setup
-RUN_CMD="git clone --branch WRLINUX_10_18_BASE git://github.com/WindRiver-Labs/wrlinux-x.git"
-echo_cmd "Cloning wrlinux 1018 source from github:"
+# Clone the source of WRLinux from github and setup
+RUN_CMD="git clone --branch ${SRC_WRL_BRANCH} ${SRC_WRL_URL}"
+echo_cmd "Cloning wrlinux-x source from github:"
cd ${SRC_WRL_DIR}
${RUN_CMD}
-RUN_CMD="./wrlinux-x/setup.sh --machines intel-x86-64 --layers meta-cloud-services"
+RUN_CMD="./wrlinux-x/setup.sh --machines ${BSP} --layers meta-cloud-services"
echo_cmd "Setup wrlinux build project:"
${RUN_CMD}
if cd ${SCRIPTS_DIR} && git rev-parse --is-inside-work-tree > /dev/null 2>&1; then
CLONED_ORAN_REPO=`dirname ${SCRIPTS_DIR}`
echo_info "Use the cloned oran repo: ${CLONED_ORAN_REPO}"
- cd ${SRC_ORAN_DIR}
- ln -sf ${CLONED_ORAN_REPO} rtp
+ mkdir ${SRC_ORAN_DIR}/rtp
+ cd ${SRC_ORAN_DIR}/rtp
+ ln -sf ${CLONED_ORAN_REPO}/meta-oran meta-oran
+ ln -sf ${CLONED_ORAN_REPO}/scripts scripts
else
echo_info "Cloning oran layer:"
cd ${SRC_ORAN_DIR}
- RUN_CMD="git clone https://gerrit.o-ran-sc.org/r/pti/rtp"
+ RUN_CMD="git clone --branch ${SRC_ORAN_BRANCH} https://gerrit.o-ran-sc.org/r/pti/rtp"
echo_cmd "Cloing with:"
${RUN_CMD}
fi
+# Apply meta patches for nxp-lx2xxx
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+ cd ${SRC_WRL_DIR}/layers/nxp-lx2xxx/
+ git am ${SRC_ORAN_DIR}/rtp/scripts/meta-patches/nxp-lx2xxx/0001-Revert-nxp-lx2xxx-remove-preempt-rt-related-file.patch
+fi
+
# Source the build env
cd ${SRC_WRL_DIR}
. ./environment-setup-x86_64-wrlinuxsdk-linux
########################
DISTRO = "oran-inf"
BB_NO_NETWORK = '0'
-WRTEMPLATE += "feature/oran-host-rt-tune"
+
+# Work around for CI build
+IMAGE_INSTALL_remove = "ceph"
+
+# For container image
+WR_APP_CONTAINER_APP = "rt-tests"
+
+# Disable multilib fo nxp-lx2xxx
+MULTILIBS_nxp-lx2xxx = ""
+DEFAULTTUNE_virtclass-multilib-lib32_nxp-lx2xxx = ""
+
+# Add templates
+WRTEMPLATE += "${WRTEMPLATE_COMMON}"
+WRTEMPLATE_prepend_x86-64 += "${WRTEMPLATE_X86}"
EOF
+if [ "${RM_WORK}" == "Yes" ]; then
+ echo "INHERIT += 'rm_work'" >> conf/local.conf
+fi
+
if [ "${EXTRA_CONF}" != "" ] && [ -f "${EXTRA_CONF}" ]; then
cat ${EXTRA_CONF} >> conf/local.conf
fi
# Build the oran-inf-host image
mkdir -p logs
TIMESTAMP=`date +"%Y%m%d_%H%M%S"`
-set -o pipefail
RUN_CMD="bitbake ${DRYRUN} oran-image-inf-host"
echo_cmd "Build the oran-image-inf-host image"
bitbake ${DRYRUN} oran-image-inf-host 2>&1|tee logs/bitbake_oran-image-inf-host_${TIMESTAMP}.log
-echo_info "Build succeeded, you can get the image in ${PRJ_BUILD_DIR}/tmp-glibc/deploy/images/intel-x86-64/oran-image-inf-host-intel-x86-64.iso"
+RUN_CMD="bitbake ${DRYRUN} wr-app-container"
+echo_cmd "Build the wr-app-container image"
+bitbake ${DRYRUN} wr-app-container 2>&1|tee logs/bitbake_wr-app-container_${TIMESTAMP}.log
+
+echo_info "Build succeeded, you can get the image in ${PRJ_BUILD_DIR}/tmp-glibc/deploy/images/${BSP}/oran-image-inf-host-${BSP}.${IMAGE_TYPE}"