+++ /dev/null
-module xran-module-cap {
- yang-version 1.1;
- namespace "urn:xran:module-cap:1.0";
- prefix "xran-module-cap";
-
- organization "xRAN Forum";
-
- contact
- "www.xran.org";
-
- description
- "This module defines the module capabilities for
- the xRAN Radio Unit.
-
- Copyright 2018 the xRAN Forum.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the above disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the above disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the Members of the xRAN Forum nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.";
-
- revision "2018-07-20" {
- description
- "version 1.0.0 - First release of the xRAN YANG M-Plane models.
-
- This version of the model supports v01.00 of the corrsponding xRAN
- M-Plane Specification.";
- reference "XRAN-FH.MP.0-v01.00";
- }
-
- grouping compression-method-grouping {
- description
- "Grouping for compression method.";
-
- leaf compression-method {
- type enumeration {
- enum BLOCK_FLOATING_POINT {
- description
- "Block floating point compression and decompression will be used";
- }
-
- enum BLOCK_SCALING {
- description
- "Block scaling compression and decompresion will be used";
- }
-
- enum U_LAW {
- description
- "u-Law compression and decompresion method will be used";
- }
-
- enum BEAMSPACE {
- description
- "Beamspace compression and decompression will be used";
- }
-
- enum MODULATION {
- description
- "Modulation compression and decompression will be used";
- }
- }
- description
- "Compresion method which can be supported by the RU";
- }
- }
-
- container module-capability {
- config false;
- description
- "module capability object responsible for providing module capability.";
-
- container ru-capabilities {
- description
- "Structure representing set of capabilities.";
-
- leaf ru-supported-category {
- type enumeration {
- enum CAT_A {
- description
- "Informs that precoding is supported in lls-CU";
- }
- enum CAT_B {
- description
- "Informs that precoding is supported in RU";
- }
- }
-
- description
- "Informs about which category RU supports";
- }
-
- leaf number-of-ru-ports {
- type uint8;
- description
- "This value indicates the maximum number of simultaneous beams per RU.
- This value is derived by the products of “numberOfPolarizations” and “numberOfPanels”
- and “the maximum number of simultaneous beams per sub-carrier”.";
- }
-
- leaf number-of-antenna-ports {
- type uint8;
- description
- "This value indicates the number of antenna ports supported at RU.
- This parameter is used by the precoding control between lls-CU and UE.
- This value conforms to 3GPP TS38.214, Section 5.2. Value 0 means “unused”.";
- }
-
- leaf max-power-per-pa-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Maximum Power per PA per antenna. Value unit is dBm.";
- }
-
- leaf min-power-per-pa-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Minimum Power per PA per antenna. Value unit is dBm.";
- }
-
- leaf fronthaul-split-option {
- type uint8 {
- range "7";
- }
- description
- "This value indicates the Fronthaul Split Option, i.e., 2 or 7 in this release.";
- }
-
- container format-of-iq-sample {
- description
- "Indicates module capabilities about IQ samples";
-
- leaf dynamic-compression-supported {
- type boolean;
-
- description
- "Informs if radio supports dynamic compression method";
- }
-
- leaf-list supported-bitwidths {
- type uint8 {
- range "1..16";
- }
-
- description
- "List of supported bitwidths";
- }
-
- leaf realtime-variable-bit-width-supported {
- type boolean;
-
- description
- "Informs if RU supports realtime variable bit with";
- }
-
- list compression-method-supported {
- uses compression-method-grouping;
- key "compression-method";
- description
- "List of supported compression methods by RU";
- }
-
- leaf variable-bit-width-per-channel-supported {
- when "/module-capability/ru-capabilities/format-of-iq-sample/realtime-variable-bit-width-supported = 'true'";
- type boolean;
-
- description
- "Informs if variable bit width per channel is supported or not";
- }
-
- leaf syminc-supported {
- type boolean;
-
- description
- "Informs if symbol number increment command in a C-Plane is
- supported or not";
- }
- }
-
- list ul-mixed-num-required-guard-rbs {
- key "scs-a scs-b";
- description
- "Required number of guard resource blocks for the combination of
- subcarrier spacing values for uplink";
- leaf scs-a{
- type enumeration {
- enum KHZ_15 {
- value 0;
- description
- "15kHz sub carrier spacing";
- }
- enum KHZ_30 {
- value 1;
- description
- "30kHz sub carrier spacing";
- }
- enum KHZ_60 {
- value 2;
- description
- "60kHz sub carrier spacing";
- }
- enum KHZ_120 {
- value 3;
- description
- "120kHz sub carrier spacing";
- }
- enum KHZ_240 {
- value 4;
- description
- "240kHz sub carrier spacing";
- }
- enum KHZ_1_25 {
- value 12;
- description
- "1,25kHz sub carrier spacing";
- }
- enum KHZ_5 {
- value 14;
- description
- "5kHz sub carrier spacing";
- }
- }
- description
- "Sub-carrier spacing configuration";
- }
- leaf scs-b{
- type enumeration {
- enum KHZ_15 {
- value 0;
- description
- "15kHz sub carrier spacing";
- }
- enum KHZ_30 {
- value 1;
- description
- "30kHz sub carrier spacing";
- }
- enum KHZ_60 {
- value 2;
- description
- "60kHz sub carrier spacing";
- }
- enum KHZ_120 {
- value 3;
- description
- "120kHz sub carrier spacing";
- }
- enum KHZ_240 {
- value 4;
- description
- "240kHz sub carrier spacing";
- }
- enum KHZ_1_25 {
- value 12;
- description
- "1,25kHz sub carrier spacing";
- }
- enum KHZ_5 {
- value 14;
- description
- "5kHz sub carrier spacing";
- }
- }
- description
- "Sub-carrier spacing configuration";
- }
- leaf number-of-guard-rbs-ul{
- type uint8;
- description
- "This value indicates the required number of guard resource blocks
- between the mixed numerologies, the RB using scs-a and the RB
- using scs-b. It's number is based on scs-a";
- }
- }
- list dl-mixed-num-required-guard-rbs {
- key "scs-a scs-b";
- description
- "Required number of guard resource blocks for the combination of
- subcarrier spacing values for downlink";
- leaf scs-a{
- type enumeration {
- enum KHZ_15 {
- value 0;
- description
- "15kHz sub carrier spacing";
- }
- enum KHZ_30 {
- value 1;
- description
- "30kHz sub carrier spacing";
- }
- enum KHZ_60 {
- value 2;
- description
- "60kHz sub carrier spacing";
- }
- enum KHZ_120 {
- value 3;
- description
- "120kHz sub carrier spacing";
- }
- enum KHZ_240 {
- value 4;
- description
- "240kHz sub carrier spacing";
- }
- enum KHZ_1_25 {
- value 12;
- description
- "1,25kHz sub carrier spacing";
- }
- enum KHZ_5 {
- value 14;
- description
- "5kHz sub carrier spacing";
- }
- }
- description
- "Sub-carrier spacing configuration";
- }
- leaf scs-b{
- type enumeration {
- enum KHZ_15 {
- value 0;
- description
- "15kHz sub carrier spacing";
- }
- enum KHZ_30 {
- value 1;
- description
- "30kHz sub carrier spacing";
- }
- enum KHZ_60 {
- value 2;
- description
- "60kHz sub carrier spacing";
- }
- enum KHZ_120 {
- value 3;
- description
- "120kHz sub carrier spacing";
- }
- enum KHZ_240 {
- value 4;
- description
- "240kHz sub carrier spacing";
- }
- enum KHZ_1_25 {
- value 12;
- description
- "1,25kHz sub carrier spacing";
- }
- enum KHZ_5 {
- value 14;
- description
- "5kHz sub carrier spacing";
- }
- }
- description
- "Sub-carrier spacing configuration";
- }
- leaf number-of-guard-rbs-dl{
- type uint8;
- description
- "This value indicates the required number of guard resource blocks
- between the mixed numerologies, the RB using scs-a and the RB
- using scs-b. It's number is based on scs-a";
- }
- }
- }
- list band-capabilities {
- key band-number;
- description
- "Capabilities that are needed to be defined per each band";
-
- leaf band-number {
- type uint16;
- description
- "Band number";
- }
-
- leaf max-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Maximum supported downlink frequency. Value unit is Hz.";
- }
-
- leaf min-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Minimum supported downlink frequency. Value unit is Hz.";
- }
-
- leaf max-supported-bandwidth-dl {
- type uint64;
- description
- "This value indicates Maximum total downlink bandwidth in module. Value unit is Hz.";
- }
-
- leaf max-num-carriers-dl {
- type uint32;
- description
- "This value indicates Maximum number of downlink carriers in module.";
- }
-
- leaf max-carrier-bandwidth-dl {
- type uint64;
- description
- "This value indicates Maximum bandwidth per downlink carrier. Value unit is Hz.";
- }
-
- leaf min-carrier-bandwidth-dl {
- type uint64;
- description
- "This value indicates Minimum bandwidth per downlink carrier. Value unit is Hz.";
- }
-
- leaf max-supported-frequency-ul {
- type uint64;
- description
- "This value indicates Maximum supported uplink frequency. Value unit is Hz.";
- }
-
- leaf min-supported-frequency-ul {
- type uint64;
- description
- "This value indicates Minimum supported uplink frequency. Value unit is Hz.";
- }
-
- leaf max-supported-bandwidth-ul {
- type uint64;
- description
- "This value indicates Maximum total uplink bandwidth in module. Value unit is Hz.";
- }
-
- leaf max-num-carriers-ul {
- type uint32;
- description
- "This value indicates Maximum number of uplink carriers in module.";
- }
-
- leaf max-carrier-bandwidth-ul {
- type uint64;
- description
- "This value indicates Maximum bandwidth per uplink carrier. Value unit is Hz.";
- }
-
- leaf min-carrier-bandwidth-ul {
- type uint64;
- description
- "This value indicates Minimum bandwidth per uplink carrier. Value unit is Hz.";
- }
-// leaf number-of-supported-streams {
-// when "/module-capability/ru-capabilities/ru-supported-category = 'CAT_A'"
-// type uint8;
-// description
-// "Number of supported spatial stream in case CAT-A is supported";
-// }
-// Fixed me if they are necessary.
-
- leaf max-num-component-carriers {
- type uint8;
- description "maximum number of component carriers supported by the RU";
- }
-
- leaf max-num-bands {
- type uint16;
- description "maximum number of bands supported by the RU";
- }
-
- leaf max-num-sectors {
- type uint8;
- description "maximum number of sectors supported by the RU";
- }
-
- leaf max-power-per-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Maximum Power per band per antenna. Value unit is dBm.";
- }
-
- leaf min-power-per-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Minimum Power per band per antenna. Value unit is dBm.";
- }
-
- leaf codebook-configuration_ng {
- type uint8;
- description
- "This parameter informs the precoder codebook_ng that are used for precoding";
- }
-
- leaf codebook-configuration_n1 {
- type uint8;
- description
- "This parameter informs the precoder codebook_n1 that are used for precoding";
- }
-
- leaf codebook-configuration_n2 {
- type uint8;
- description
- "This parameter informs the precoder codebook_n2 that are used for precoding";
- }
- }
- }
-}
Code Review / sim / o1-interface.git / blobdiff