+++ /dev/null
-module xran-ald-port {
- yang-version 1.1;
- namespace "urn:xran:ald-port:1.0";
- prefix "xran-ald-port";
-
- organization "xRAN Forum";
-
- contact
- "www.xran.org";
-
- description
- "This module defines the input state and output configuration for
- the xRAN Radio Unit Antenna Line Device capability.
-
- Copyright 2018 the xRAN Forum.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the above disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the above disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the Members of the xRAN Forum nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.";
-
- revision "2018-07-20" {
- description
- "version 1.0.0 - First release of the xRAN YANG M-Plane models.
-
- This version of the model supports v01.00 of the corrsponding xRAN
- M-Plane Specification.";
- reference "XRAN-FH.MP.0-v01.00";
- }
-
- feature OVERCURRENT-SUPPORTED {
- description
- "This feature indicates that the RU supports the over-current notification
- capability.";
- }
-
- container ald-ports-io {
- description
- "ALD port information.
- ALD port of the RU that can be used to connect External Equipment (Antenna Line Devices).
- Communication uses AISG over HDLC.
- Physical connection depends on connector type offered by the port (RS-485 or antenna line)
- Note: Single instance of ALD Port can point to more than one antenna line devices.";
-
- leaf over-current-supported {
- type boolean;
- default false;
- description
- "Set to TRUE when the RU supports over curent notifications";
- }
-
- list ald-port {
- key "name";
- description
- "Leaf nodes describing ALD Port";
- leaf name {
- type string {
- length "1..255";
- }
- description
- "A name that is unique across the RU that identifies a ald port instance.
- This name may be used in fault management to refer to a fault source
- or affected object";
- }
-
- leaf port-id {
- type uint8;
- config false;
- mandatory true;
-
- description
- "A number which identifies an ALD Port.
- The number of the Physical ALD port connector in the module.
- If the module supports 2 ALD Port connectors, use 0 and 1.";
- }
-
- leaf dc-control-support{
- type boolean;
- config false;
- mandatory true;
-
- description
- "It is shown that on/off in the DC power supply is possible.
- In case of False, power supply is always on.";
- }
-
- leaf dc-enabled{
- when "./../dc-control-support = 'true'";
- type boolean;
-
- description
- "If dc-control-support is true case, this leaf is effective.
- In case of true, the power supply is turned on.";
- }
-
- leaf supported-connector{
- type enumeration {
- enum ANTENNA_CONNECTOR {
- description
- "This ald port is related to antenna connector";
- }
- enum RS485_PORT {
- description
- "This ald port is related to RS485 port";
- }
- }
- config false;
- mandatory true;
-
- description
- "Informs about the connectors of Module which ALDs are connected to.
- This value is depending on HW design.";
- }
- }
- }
-
- notification overcurrent-report {
- if-feature OVERCURRENT-SUPPORTED;
-
- description
- "The RU is able to report overcurrent condition about Port.
- This function is depending on HW design.
- The notification depend on power consumption which connected ALD devices and module.";
-
- container overload-condition {
- description
- "Container used in notification";
-
- leaf-list overloaded-ports {
- type leafref {
- path "/ald-ports-io/ald-port/name";
- }
-
- description
- "List of overloaded ports";
- }
- }
- }
-}
Code Review / sim / o1-interface.git / blobdiff