+++ /dev/null
-module xran-alarm-id {
- yang-version 1.1;
- namespace "urn:xran:alarms:1.0";
- prefix "xran-alarms";
-
- organization "xRAN Forum";
-
- contact
- "www.xran.org";
-
- description
- "This module defines the alarm identities for the RU.
-
- Copyright 2018 the xRAN Forum.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the above disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the above disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the Members of the xRAN Forum nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.";
-
- revision "2018-07-20" {
- description
- "version 1.0.0 - First release of the xRAN YANG M-Plane models.
-
- This version of the model supports v01.00 of the corrsponding xRAN
- M-Plane Specification.";
- reference "XRAN-FH.MP.0-v01.00";
- }
-
- typedef alarm-id {
- type enumeration {
- enum XRAN_HIGH_TEMP_ALARM {
- value 1;
- description "A temperature is higher than expected";
- }
- enum XRAN_OVERHEATING_ALARM {
- value 2;
- description "A temperature is dangerously high";
- }
- enum XRAN_AMBIENT_TEMP_ALARM {
- value 3;
- description "A temperature related alarm due to ambient temperature
- value going outside the allowed ambient temperature range";
- }
- enum XRAN_TEMP_TOO_LOW_ALARM {
- value 4;
- description "A temperature related alarm due to the temperature inside
- the unit being too low";
- }
- enum XRAN_BROKEN_FAN_ALARM {
- value 5;
- description "A broken fan";
- }
- enum XRAN_FAN_NOT_DETECTED_ALARM {
- value 6;
- description "A fan not detected";
- }
- enum XRAN_TUNING_ALARM {
- value 7;
- description "A tuning failure.";
- }
- enum XRAN_FILTER_ALARM {
- value 8;
- description "A faulty filter.";
- }
- enum XRAN_TX_QUALITY_ALARM {
- value 9;
- description "A transmission quality.";
- }
- enum XRAN_OVERVOLTAGE_ALARM {
- value 10;
- description "A RF overvoltage protection.";
- }
- enum XRAN_CONFIG_ALARM {
- value 11;
- description "A configuration failed.";
- }
- enum XRAN_CRITICAL_FILE_ALARM {
- value 12;
- description "A Critical file not found.";
- }
- enum XRAN_FILE_ALARM {
- value 13;
- description "A non-critical file not found.";
- }
- enum XRAN_CORRUPT_FILE_ALARM {
- value 14;
- description "A corrupt configuration file.";
- }
- enum XRAN_OPERATION_ALARM {
- value 15;
- description "A unit out of order.";
- }
- enum XRAN_NO_IDENTITY_ALARM {
- value 16;
- description "A unit cannot be identified.";
- }
- enum XRAN_NO_EXT_SYNC_SOURCE {
- value 17;
- description "An RU has no external sync source.";
- }
- enum XRAN_SYNC_ALARM {
- value 18;
- description "A unit is out of synchronization.";
- }
- enum XRAN_TX_OUT_OF_ORDER_ALARM {
- value 19;
- description "A TX path is not usable.";
- }
- enum XRAN_RX_OUT_OF_ORDER_ALARM {
- value 20;
- description "A RX path is not usable.";
- }
- enum XRAN_OPTICAL_BER_ALARM {
- value 21;
- description "An increased bit error rate on the optical link";
- }
- enum XRAN_SELF_TEST_ALARM {
- value 22;
- description "A power-on self test";
- }
- enum XRAN_FPGA_UPDATE_ALARM {
- value 23;
- description "An FPGA software update";
- }
- enum XRAN_UNIT_BLOCKED_ALARM {
- value 24;
- description "A unit is blocked";
- }
- enum XRAN_RESET_REQUEST_ALARM {
- value 25;
- description "A unit requires a reset";
- }
- enum XRAN_POWER_SUPPLY_FAULTY {
- value 26;
- description "A power supply unit has a fault";
- }
- enum XRAN_POWER_AMPLIFIER_FAULTY {
- value 27;
- description "A power amplifier unit has a fault";
- }
- enum XRAN_C_U_PLANE_LOGICAL_CONNECTION_FAULTY {
- value 28;
- description "A C/U-plane logical connection has a fault";
- }
- enum XRAN_TRANSCEIVER_FAULT {
- value 29;
- description "A transceiver unit has a fault";
- }
- enum XRAN_INTERFACE_FAULT {
- value 30;
- description "An interface unit has a fault";
- }
- }
- description
- "A typedef defining an enumerated list of XRAN alarms which corresponds to
- the fault-id in the xran management plane specification.";
- }
-}