+++ /dev/null
-module o-ran-module-cap {
- yang-version 1.1;
- namespace "urn:o-ran:module-cap:1.0";
- prefix "o-ran-module-cap";
-
- import o-ran-compression-factors {
- prefix "cf";
- revision-date 2020-08-10;
- }
-
- organization "O-RAN Alliance";
-
- contact
- "www.o-ran.org";
-
- description
- "This module defines the module capabilities for
- the O-RAN Radio Unit.
-
- Copyright 2020 the O-RAN Alliance.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the above disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the above disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the Members of the O-RAN Alliance nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.";
-
- revision "2020-12-10" {
- description
- "version 5.0.0
-
- 1) added support for optimising coupling-via-frequency-and-time-with-priorities
- by adding enhancement to existing method through a new leaf node";
-
- reference "ORAN-WG4.M.0-v05.00";
- }
-
- revision "2020-08-10" {
- description
- "version 4.0.0
-
- 1) added RO capability to expose O-RU's ability to support udCompLen record in U-Plane section header fields
- 2) feature indicating support for static PRACH configuration introduced
- 3) feature indicating support for static SRS configuration introduced
- 4) feature indicating support for TDD pattern configuration introduced
- 5) backward compatible change to introduce new O-RU's features related
- to Section Description Priority to serve for CUS-Plane C";
-
- reference "ORAN-WG4.M.0-v04.00";
- }
-
- revision "2020-04-17" {
- description
- "version 3.0.0
-
- 1) Adding optional little endian support
- 2) Added support for Dynamic Spectrum Sharing feature
- 3) Enable number-of-ru-ports to be different between dl and ul
- 4) Enable regularizationFactor to be signalled outside of section type 6
- 5) Enable PRACH preamble formats supported to be signalled by O-RU
- 6) adding support for selective RE sending
- 7) supporting new section extension for grouping multiple ports
- 8) signalling to enable O-RU to ndicate is requires unique ecpri sequence id
- for eAxC_IDs serving for UL and DL for the same carrier component";
-
- reference "ORAN-WG4.M.0-v03.00";
- }
-
- revision "2019-07-03" {
- description
- "version 1.1.0
-
- 1) backward compatible change to introduce new RW leafs for use in
- constraints in uplane-config and laa models.
- 2) removing unnecessary relations to band 46 in uplink";
-
- reference "ORAN-WG4.M.0-v01.00";
- }
-
- revision "2019-02-04" {
- description
- "version 1.0.0
-
- 1) imported model from xRAN
- 2) changed namespace and reference from xran to o-ran";
-
- reference "ORAN-WG4.M.0-v01.00";
- }
-
- feature LAA {
- description
- "Indicates that the Radio Unit supports LAA.";
- }
-
- feature EAXC-ID-GROUP-SUPPORTED {
- description
- "indicates that the Radio Unit supports EAXC-ID-GROUP-SUPPORTED.";
- }
-
- feature TRANSPORT-FRAGMENTATION {
- description
- "This leaf is used to indicate whether the O-RU supports O-RAN Radio Transport Fragmentation";
- }
-
- feature DSS_LTE_NR {
- description
- "Indicates that the Radio Unit supports Dynamic Spectrum Sharing between LTE and NR.";
- }
-
- feature PRACH-STATIC-CONFIGURATION-SUPPORTED {
- description
- "This leaf is used to indicate O-RU's support for configuration of PRACH (Physical Random Access Channel) pattern in the static manner, so that PRACH U-Plane traffic can be processed by RU without receiving C-Plane messages conveying the PRACH configuration.";
- }
-
- feature SRS-STATIC-CONFIGURATION-SUPPORTED {
- description
- "This leaf is used to indicate O-RU's support for configuration of SRS (Sounding Reference Signal Channel) pattern in the static manner, so that SRS U-Plane traffic can be processed by RU without receiving C-Plane messages conveying the SRS configuration.";
- }
-
- feature CONFIGURABLE-TDD-PATTERN-SUPPORTED {
- description
- "This leaf is used to indicate O-RU's support for configurable TDD pattern.";
- }
-
- typedef sub-band-string {
- type string {
- pattern [ABCD];
- }
- description "Sub bands definition";
- }
-
- typedef scs-config-type {
- type enumeration {
- enum KHZ_15 {
- value 0;
- description
- "15kHz sub carrier spacing";
- }
- enum KHZ_30 {
- value 1;
- description
- "30kHz sub carrier spacing";
- }
- enum KHZ_60 {
- value 2;
- description
- "60kHz sub carrier spacing";
- }
- enum KHZ_120 {
- value 3;
- description
- "120kHz sub carrier spacing";
- }
- enum KHZ_240 {
- value 4;
- description
- "240kHz sub carrier spacing";
- }
- enum KHZ_1_25 {
- value 12;
- description
- "1,25kHz sub carrier spacing";
- }
- enum KHZ_3_75 {
- value 13;
- description
- "3.75kHz sub carrier spacing";
- }
- enum KHZ_5 {
- value 14;
- description
- "5kHz sub carrier spacing";
- }
- enum KHZ_7_5 {
- value 15;
- description
- "7.5kHz sub carrier spacing";
- }
- }
-
- description
- "Scs configuration type definition";
- }
-
- grouping compression-method-grouping {
- description
- "Grouping for compression method.";
-
- leaf compression-method {
- type enumeration {
- enum BLOCK_FLOATING_POINT {
- description
- "Block floating point compression and decompression will be used";
- }
-
- enum BLOCK_SCALING {
- description
- "Block scaling compression and decompresion will be used";
- }
-
- enum U_LAW {
- description
- "u-Law compression and decompresion method will be used";
- }
-
- enum BEAMSPACE {
- description
- "Beamspace compression and decompression will be used";
- }
-
- enum MODULATION {
- description
- "Modulation compression and decompression will be used";
- }
-
- enum BLOCK-FLOATING-POINT-SELECTIVE-RE-SENDING {
- description
- "block floating point with selective re sending
- compression and decompression will be used";
- }
- enum MODULATION-COMPRESSION-SELECTIVE-RE-SENDING {
- description
- "modulation compression with selective re sending
- compression and decompression will be used";
- }
- }
- description
- "Compresion method which can be supported by the O-RU.
- An O-RU may further refine the applicability of compression
- methods per endpoint using o-ran-uplane-conf.yang model";
- }
- }
-
- grouping sub-band-max-min-ul-dl-frequency {
- description
- "Grouping for defining max and min supported frequency - dl and ul.";
-
- leaf max-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Maximum supported downlink frequency in the
- LAA subband. Value unit is Hz.";
- }
-
- leaf min-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Minimum supported downlink frequency in the
- LAA subband. Value unit is Hz.";
- }
- }
-
- grouping format-of-iq-sample {
- description
- "Indicates module capabilities about IQ samples";
-
- leaf dynamic-compression-supported {
- type boolean;
-
- description
- "Informs if radio supports dynamic compression method";
- }
-
- leaf realtime-variable-bit-width-supported {
- type boolean;
-
- description
- "Informs if O-RU supports realtime variable bit with";
- }
-
- list compression-method-supported {
- uses cf:compression-details;
-
- leaf-list fs-offset {
- if-feature cf:CONFIGURABLE-FS-OFFSET;
- type uint8;
- default 0;
- description
- "List of fs offset values supported with this IQ format / compression method;
- fs-offset adjusts FS (full scale) value of IQ format relative to FS derived from unmodified IQ format.
- Please refer to CU-Plane specification for details";
- }
-
- description
- "List of supported compression methods by O-RU
- Note: if O-RU supports different compression methods per endpoint
- then please refer to endpoints to have information what
- exactly is supported on paticular endpoint";
- }
-
- leaf variable-bit-width-per-channel-supported {
- when "/module-capability/ru-capabilities/format-of-iq-sample/realtime-variable-bit-width-supported = 'true'";
- type boolean;
-
- description
- "Informs if variable bit width per channel is supported or not";
- }
-
- leaf syminc-supported {
- type boolean;
-
- description
- "Informs if symbol number increment command in a C-Plane is
- supported or not";
- }
-
- leaf regularization-factor-se-supported {
- type boolean;
-
- description
- "Informs if regularizationFactor in section type 5 is
- supported(true) or not(false)";
- }
-
- leaf little-endian-supported {
- type boolean;
- default false;
-
- description
- "All O-RUs support bigendian byte order. This node informs if module supports the
- the optional capability for little endian byte order for C/U plane data flows.
-
- Note - little endian support does not invalidate bigendian support.";
- }
-
- }
-
- grouping scs-a-b {
- description
- "Grouping for scs-a and scs-b";
- leaf scs-a{
- type scs-config-type;
- description
- "Sub-carrier spacing configuration";
- }
- leaf scs-b{
- type scs-config-type;
- description
- "Sub-carrier spacing configuration";
- }
- }
-
- grouping ul-mixed-num-required-guard-rbs {
- description
- "Required number of guard resource blocks for the combination of
- subcarrier spacing values for uplink";
- uses scs-a-b;
- leaf number-of-guard-rbs-ul{
- type uint8;
- description
- "This value indicates the required number of guard resource blocks
- between the mixed numerologies, the RB using scs-a and the RB
- using scs-b. It's number is based on scs-a";
- }
- }
-
- grouping dl-mixed-num-required-guard-rbs {
- description
- "Required number of guard resource blocks for the combination of
- subcarrier spacing values for uplink";
- uses scs-a-b;
- leaf number-of-guard-rbs-dl{
- type uint8;
- description
- "This value indicates the required number of guard resource blocks
- between the mixed numerologies, the RB using scs-a and the RB
- using scs-b. It's number is based on scs-a";
- }
- }
-
- grouping ru-capabilities {
- description
- "Structure representing set of capabilities.";
-
- leaf ru-supported-category {
- type enumeration {
- enum CAT_A {
- description
- "Informs that precoding is not supported in O-RU";
- }
- enum CAT_B {
- description
- "Informs that precoding is supported in O-RU";
- }
- }
-
- description
- "Informs about which category O-RU supports";
- }
-
- leaf number-of-ru-ports {
- type uint8;
- status deprecated;
- description
- "Assuming all endpoints support time-managed traffic AND non-time-managed traffic (choice is as per configuration)
- - the number of O-RU ports is the product of number of spatial streams (leaf number-of-spatial-streams) and number of numerologies O-RU supports.
- For example, if the number of spatial streams is 4 then the number of O-RU ports is 8 when PUSCH and PRACH are processed in the different endpoints.
- In case there are specific endpoints that support non-time-managed traffic only
- - the number of O-RU ports calculated with above mentioned equation is extended by number of endpoints supporting only non-time-managed traffic.";
- }
- leaf number-of-ru-ports-ul {
- type uint8;
- description
- "Assuming all endpoints support time-managed traffic AND non-time-managed traffic (choice is as per configuration)
- - the number of O-RU ports for uplink is the product of number of spatial streams (leaf number-of-spatial-streams) and number of numerologies O-RU supports.
- For example, if the number of spatial streams is 4 then the number of O-RU ports is 8 when PUSCH and PRACH are processed in the different endpoints.
- In case there are specific endpoints that support non-time-managed traffic only
- - the number of O-RU ports calculated with above mentioned equation is extended by number of endpoints supporting only non-time-managed traffic.";
- }
- leaf number-of-ru-ports-dl {
- type uint8;
- description
- "Assuming all endpoints support time-managed traffic AND non-time-managed traffic (choice is as per configuration)
- - the number of O-RU ports for downlink is the product of number of spatial streams (leaf number-of-spatial-streams) and number of numerologies O-RU supports.
- For example, if the number of spatial streams is 4 then the number of O-RU ports is 8 when SSB and non-SSB are processed in the different endpoints.
- In case there are specific endpoints that support non-time-managed traffic only
- - the number of O-RU ports calculated with above mentioned equation is extended by number of endpoints supporting only non-time-managed traffic.";
- }
-
- leaf number-of-spatial-streams {
- type uint8;
- description
- "This value indicates the number of spatial streams supported at O-RU for DL and UL.
- For DL, it is same as the number of antenna ports specified in 3GPP TS38.214, Section 5.2 and 3GPP TS36.213, Section 5.2.";
- }
-
- leaf max-power-per-pa-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Maximum Power per PA per antenna. Value unit is dBm.";
- }
-
- leaf min-power-per-pa-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Minimum Power per PA per antenna. Value unit is dBm.";
- }
-
- leaf fronthaul-split-option {
- type uint8 {
- range "7";
- }
- description
- "This value indicates the Fronthaul Split Option, i.e., 2 or 7 in this release.";
- }
-
- container format-of-iq-sample {
- description
- "Indicates module capabilities about IQ samples";
-
- uses format-of-iq-sample;
- }
-
- list ul-mixed-num-required-guard-rbs {
- key "scs-a scs-b";
- description
- "List of required number of guard resource blocks
- for the combination of subcarrier spacing values for downlink";
-
- uses ul-mixed-num-required-guard-rbs;
- }
- list dl-mixed-num-required-guard-rbs {
- key "scs-a scs-b";
- description
- "List of required number of guard resource blocks
- for the combination of subcarrier spacing values for uplink";
-
- uses dl-mixed-num-required-guard-rbs;
- }
-
- leaf energy-saving-by-transmission-blanks {
- type boolean;
- mandatory true;
- description
- "Parameter informs if unit supports energy saving by transmission blanking";
- }
- container eaxcid-grouping-capabilities {
- if-feature o-ran-module-cap:EAXC-ID-GROUP-SUPPORTED;
- description
- "a container with parameters for eaxcid grouping";
- leaf max-num-tx-eaxc-id-groups {
- type uint8;
- description
- "Maximum number of configurable tx-eaxc-id-group supported by O-RU.";
- }
- leaf max-num-tx-eaxc-ids-per-group {
- type uint8;
- description
- "Maximum number of member-tx-eaxc-id in single tx-eaxc-id-group supported by O-RU.";
- }
- leaf max-num-rx-eaxc-id-groups {
- type uint8;
- description
- "the maximum number of groups with the eAxC IDs those are assigned to low-level-rx-links.";
- }
- leaf max-num-rx-eaxc-ids-per-group {
- type uint8;
- description
- "the maximum number of eAxC IDs per rx-eaxc-id-group.";
- }
- }
-
- leaf dynamic-transport-delay-management-supported {
- type boolean;
- mandatory true;
- description
- "Parameter informs if unit supports dynamic transport delay management through eCPRI Msg 5";
- }
-
- leaf support-only-unique-ecpri-seqid-per-eaxc {
- type boolean;
- default false;
- description
- "Parameter informs if O-RU expects unique ecpri sequence id for eAxC_IDs serving
- for UL and DL for the same carrier component.
-
- Note: If this is set to TRUE, the O-DU can decide to either use different eAxC_IDs for UL and
- DL or can generate unique sequence ID per eAxC_ID.
-
- TAKE NOTE: This leaf is backwards compatible from an O-RU persepctive BUT an O-RU that
- sets this leaf to TRUE may result in incompatibilities when operating with an O-DU
- designed according to the O-RAN CUS-Plane Specification v02.00, e.g., if the O-DU is
- incapable of using different eAxC values between UL and DL";
- }
-
- container coupling-methods {
- description
- "O-RU's capabilities related to supported C-Plane and U-Plane coupling methods";
-
- leaf coupling-via-frequency-and-time {
- type boolean;
- description
- "Coupling via frequency and time; see methods of coupling of C-plane and U-plane in CUS-Plane specification";
- }
-
- leaf coupling-via-frequency-and-time-with-priorities {
- type boolean;
- description
- "Coupling via Frequency and time with priorities; see methods of coupling of C-plane and U-plane in CUS-Plane specification.
- Note: If coupling-via-frequency-and-time-with-priorities is 'true' then coupling-via-frequency-and-time shall also be 'true'.";
- }
-
- leaf coupling-via-frequency-and-time-with-priorities-optimized {
- type boolean;
- description
- "Coupling via Frequency and time with priorities optimized; see methods of coupling of C-plane and U-plane in CUS-Plane specification.
- Note: If coupling-via-frequency-and-time-with-priorities-optmized is 'true' then coupling-via-frequency-and-time shall also be 'true'.";
- }
- }
-
- leaf ud-comp-len-supported {
- type boolean;
- description
- "This property informs if O-RU supports optional field udCompLen in U-Plane messages.
- Only in case this leaf is present and its value is TRUE, O-RU supports U-Plane messages
- containing udCompLen field in section header.";
- }
- }
-
- grouping sub-band-info {
- description "container for collection of leafs for LAA subband 46";
- list sub-band-frequency-ranges {
- key sub-band;
- description "frequency information on a per sub-band basis";
- leaf sub-band {
- type sub-band-string;
- description "Sub band when band 46";
- }
- uses sub-band-max-min-ul-dl-frequency;
- }
- leaf number-of-laa-scarriers {
- type uint8;
- description
- "This value indicates the number of LAA secondary carriers supported at O-RU.";
- }
-
- leaf maximum-laa-buffer-size {
- type uint16;
- description
- "Maximum O-RU buffer size in Kilobytes (KB) per CC. This parameter is
- needed at the O-DU to know how much data can be sent in advance
- and stored at the O-RU to address the LBT uncertainity.";
- }
-
- leaf maximum-processing-time {
- type uint16;
- units microseconds;
- description
- "Maximum O-RU Processing time in microseconds at the O-RU to handle the
- received/transmitted packets from/to the O-DU. This parameter is
- needed at the O-DU to determine the time where it needs to send
- the data to the O-RU.";
- }
-
- leaf self-configure {
- type boolean;
- description "This value indicates that the O-RU can manage the contention window locally. ";
- }
- }
-
- grouping support-for-dl {
- description
- "Grouping for DL specific parameters";
-
- leaf max-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Maximum supported downlink frequency. Value unit is Hz.";
- }
-
- leaf min-supported-frequency-dl {
- type uint64;
- description
- "This value indicates Minimum supported downlink frequency. Value unit is Hz.";
- }
-
- leaf max-supported-bandwidth-dl {
- type uint64;
- description
- "This value indicates Maximum total downlink bandwidth in module. Value unit is Hz.";
- }
-
- leaf max-num-carriers-dl {
- type uint32;
- description
- "This value indicates Maximum number of downlink carriers in module.";
- }
-
- leaf max-carrier-bandwidth-dl {
- type uint64;
- description
- "This value indicates Maximum bandwidth per downlink carrier. Value unit is Hz.";
- }
-
- leaf min-carrier-bandwidth-dl {
- type uint64;
- description
- "This value indicates Minimum bandwidth per downlink carrier. Value unit is Hz.";
- }
-
- leaf-list supported-technology-dl {
- type enumeration{
- enum LTE {
- description "LTE is supported in DL path.";
- }
- enum NR {
- description "NR is supported in DL path.";
- }
- enum DSS_LTE_NR {
- if-feature DSS_LTE_NR;
- description
- "DSS is supported in the DL, which implicitly means LTE and NR are also
- BOTH supported in the DL.";
- }
- }
- min-elements 1;
- description
- "This list provides information regarding technologies supported in DL path";
- }
- }
-
- grouping support-for-ul {
- description
- "Grouping for UL specific parameters";
-
- leaf max-supported-frequency-ul {
- type uint64;
- description
- "This value indicates Maximum supported uplink frequency. Value unit is Hz.";
- }
-
- leaf min-supported-frequency-ul {
- type uint64;
- description
- "This value indicates Minimum supported uplink frequency. Value unit is Hz.";
- }
-
- leaf max-supported-bandwidth-ul {
- type uint64;
- description
- "This value indicates Maximum total uplink bandwidth in module. Value unit is Hz.";
- }
-
- leaf max-num-carriers-ul {
- type uint32;
- description
- "This value indicates Maximum number of uplink carriers in module.";
- }
-
- leaf max-carrier-bandwidth-ul {
- type uint64;
- description
- "This value indicates Maximum bandwidth per uplink carrier. Value unit is Hz.";
- }
-
- leaf min-carrier-bandwidth-ul {
- type uint64;
- description
- "This value indicates Minimum bandwidth per uplink carrier. Value unit is Hz.";
- }
-
- leaf-list supported-technology-ul {
- type enumeration{
- enum LTE {
- description "LTE is supported in UL path.";
- }
- enum NR {
- description "NR is supported in UL path.";
- }
- enum DSS_LTE_NR {
- if-feature DSS_LTE_NR;
- description
- "DSS is supported in the UL, which implicitly means LTE and NR are also
- BOTH supported in the UL.";
- }
- }
- min-elements 1;
- description
- "This list provides information regarding technologies supported in UL path";
- }
- }
-
- grouping band-capabilities {
- description
- "Capabilities that are needed to be defined per each band";
-
- leaf band-number {
- type uint16;
- description
- "Band number";
- }
-
- container sub-band-info {
- when "../band-number = '46'";
- if-feature "o-ran-module-cap:LAA";
- description "container for collection of leafs for LAA subband 46";
- uses sub-band-info;
- }
-
- uses support-for-dl;
- uses support-for-ul;
-
- leaf max-num-component-carriers {
- type uint8;
- description "maximum number of component carriers supported by the O-RU";
- }
-
- leaf max-num-bands {
- type uint16;
- description "maximum number of bands supported by the O-RU";
- }
-
- leaf max-num-sectors {
- type uint8;
- description "maximum number of sectors supported by the O-RU";
- }
-
- leaf max-power-per-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Maximum Power per band per antenna. Value unit is dBm.";
- }
-
- leaf min-power-per-antenna {
- type decimal64{
- fraction-digits 4;
- }
- description
- "This value indicates Minimum Power per band per antenna. Value unit is dBm.";
- }
-
- leaf codebook-configuration_ng {
- type uint8;
- description
- "This parameter informs the precoder codebook_ng that are used for precoding";
- }
-
- leaf codebook-configuration_n1 {
- type uint8;
- description
- "This parameter informs the precoder codebook_n1 that are used for precoding";
- }
-
- leaf codebook-configuration_n2 {
- type uint8;
- description
- "This parameter informs the precoder codebook_n2 that are used for precoding";
- }
- }
-
- container module-capability {
-
- description
- "module capability object responsible for providing module capability.";
-
- container ru-capabilities {
- config false;
- description
- "Structure representing set of capabilities.";
-
- uses ru-capabilities;
- }
-
- list band-capabilities {
- key band-number;
- config false;
- description
- "Capabilities that are needed to be defined per each band";
-
- uses band-capabilities;
- }
- container rw-sub-band-info {
- if-feature "o-ran-module-cap:LAA";
- description "config true leafrefs for use as constraints for config true leafs";
- leaf rw-number-of-laa-scarriers {
- type leafref {
- path "/module-capability/band-capabilities/sub-band-info/number-of-laa-scarriers";
- require-instance false;
- }
- description
- "This value indicates the number of LAA secondary carriers supported at O-RU.";
- }
- leaf rw-self-configure {
- type leafref {
- path "/module-capability/band-capabilities/sub-band-info/self-configure";
- require-instance false;
- }
- description
- "This value indicates that the O-RU can manage the contention window locally.";
- }
- }
- }
-}