+++ /dev/null
-#!/bin/bash
-
-# ============LICENSE_START===============================================
-# Copyright (C) 2020 Nordix Foundation. All rights reserved.
-# ========================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=================================================
-#
-
-# This is a script that contains specific test functions for Policy Agent API
-
-### API functiond towards the Policy Agent
-
-# Generic function to query the agent via the REST or DMAAP interface.
-# Used by all other agent api test functions
-# REST or DMAAP is controlled of the base url of $ADAPTER
-# arg: GET|PUT|POST|DELETE <url> [<file>]
-# (Not for test scripts)
-__do_curl_to_agent() {
- echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- paramError=0
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- paramError=1
- else
- timeout=""
- oper=""
- file=''
- httpcode=" -sw %{http_code}"
- accept=''
- content=''
-
- if [ $# -gt 2 ]; then
- content=" -H Content-Type:application/json"
- fi
- if [ $1 == "GET" ]; then
- oper="GET"
- if [ $# -ne 2 ];then
- paramError=1
- fi
- elif [ $1 == "PUT" ]; then
- oper="PUT"
- if [ $# -eq 3 ]; then
- file=" --data-binary @$3"
- fi
- accept=" -H accept:application/json"
- elif [ $1 == "POST" ]; then
- oper="POST"
- accept=" -H accept:*/*"
- if [ $# -ne 2 ];then
- paramError=1
- fi
- elif [ $1 == "DELETE" ]; then
- oper="DELETE"
- if [ $# -ne 2 ];then
- paramError=1
- fi
- else
- paramError=1
- fi
- fi
-
- if [ $paramError -eq 1 ]; then
- ((RES_CONF_FAIL++))
- echo "-Incorrect number of parameters to __do_curl_agent " $@ >> $HTTPLOG
- echo "-Expected: GET|PUT|POST|DELETE <url> [<file>]" >> $HTTPLOG
- echo "-Returning response 000" >> $HTTPLOG
- echo "-000"
- return 1
- fi
-
- if [ $ADAPTER == $RESTBASE ]; then
- url=" "${ADAPTER}${2}
- oper=" -X "$oper
- curlString="curl"${oper}${timeout}${httpcode}${accept}${content}${url}${file}
- echo " CMD: "$curlString >> $HTTPLOG
- if [ $# -eq 3 ]; then
- echo " FILE: $(<$3)" >> $HTTPLOG
- fi
-
- # Do retry for configured response codes, otherwise only one attempt
- maxretries=5
- while [ $maxretries -ge 0 ]; do
-
- let maxretries=maxretries-1
- res=$($curlString)
- retcode=$?
- if [ $retcode -ne 0 ]; then
- echo " RETCODE: "$retcode >> $HTTPLOG
- echo "000"
- return 1
- fi
- retry=0
- echo " RESP: "$res >> $HTTPLOG
- status=${res:${#res}-3}
- if [ ! -z "${AGENT_RETRY_CODES}" ]; then
- for retrycode in $AGENT_RETRY_CODES; do
- if [ $retrycode -eq $status ]; then
- echo -e $RED" Retrying (according to set codes for retry), got status $status....."$ERED >> $HTTPLOG
- sleep 1
- retry=1
- fi
- done
- fi
- if [ $retry -eq 0 ]; then
- maxretries=-1
- fi
- done
- echo $res
- return 0
- else
- requestUrl=$2
- if [ $1 == "PUT" ] && [ $# -eq 3 ]; then
- payload="$(cat $3 | tr -d '\n' | tr -d ' ' )"
- echo "payload: "$payload >> $HTTPLOG
- file=" --data-binary "$payload
- fi
- #urlencode the request url since it will be carried by send-request url
- requestUrl=$(python -c "import urllib, sys; print urllib.quote(sys.argv[1])" "$2")
- url=" "${ADAPTER}"/send-request?url="${requestUrl}"&operation="${oper}
- curlString="curl -X POST${timeout}${httpcode}${content}${url}${file}"
- echo " CMD: "$curlString >> $HTTPLOG
- res=$($curlString)
- retcode=$?
- if [ $retcode -ne 0 ]; then
- echo " RETCODE: "$retcode >> $HTTPLOG
- echo "000"
- return 1
- fi
- echo " RESP: "$res >> $HTTPLOG
- status=${res:${#res}-3}
- if [ $status -ne 200 ]; then
- echo "000"
- return 1
- fi
- cid=${res:0:${#res}-3}
- url=" "${ADAPTER}"/receive-response?correlationid="${cid}
- curlString="curl -X GET"${timeout}${httpcode}${url}
- echo " CMD: "$curlString >> $HTTPLOG
- res=$($curlString)
- retcode=$?
- if [ $retcode -ne 0 ]; then
- echo " RETCODE: "$retcode >> $HTTPLOG
- echo "000"
- return 1
- fi
- echo " RESP: "$res >> $HTTPLOG
- status=${res:${#res}-3}
- TS=$SECONDS
- # wait of the reply from the agent...
- while [ $status -eq 204 ]; do
- if [ $(($SECONDS - $TS)) -gt 90 ]; then
- echo " RETCODE: (timeout after 90s)" >> $HTTPLOG
- echo "000"
- return 1
- fi
- sleep 1
- echo " CMD: "$curlString >> $HTTPLOG
- res=$($curlString)
- if [ $retcode -ne 0 ]; then
- echo " RETCODE: "$retcode >> $HTTPLOG
- echo "000"
- return 1
- fi
- echo " RESP: "$res >> $HTTPLOG
- status=${res:${#res}-3}
- done
- if [ $status -eq 200 ]; then
- body=${res:0:${#res}-3}
- echo $body
- return 0
- fi
- echo "Status not 200, returning response 000" >> $HTTPLOG
- echo "0000"
- return 1
- fi
-}
-
-
-#########################################################
-#### Test case functions A1 Policy management service
-#########################################################
-
-# This function compare the size, towards a target value, of a json array returned from <url> of the Policy Agent.
-# This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
-# args: json:<url> <target-value> [<timeout-in-seconds]
-# (Function for test scripts)
-api_equal() {
- echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- if [[ $1 == "json:"* ]]; then
- __var_test "Policy Agent" $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT"/" $1 "=" $2 $3
- return 0
- fi
- fi
-
- ((RES_CONF_FAIL++))
- __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
- return 1
-}
-
-# API Test function: GET /policies
-# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-ype-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
-# (Function for test scripts)
-api_get_policies() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
- paramError=0
- if [ $# -lt 4 ]; then
- paramError=1
- elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
- paramError=1
- elif [ $# -gt 4 ] && [ $(($#%5)) -ne 4 ]; then
- paramError=1
- fi
-
- if [ $paramError -ne 0 ]; then
- __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-ype-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
- return 1
- fi
- queryparams=""
- if [ $2 != "NORIC" ]; then
- queryparams="?ric="$2
- fi
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service="$3
- else
- queryparams=$queryparams"&service="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?type="$4
- else
- queryparams=$queryparams"&type="$4
- fi
- fi
-
- query="/policies"$queryparams
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 4 ]; then
- if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
- targetJson="["
- else
- body=${res:0:${#res}-3}
- targetJson="["
- arr=(${@:5})
-
- for ((i=0; i<$(($#-4)); i=i+5)); do
-
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- targetJson=$targetJson"{\"id\":\"${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
- if [ "${arr[$i+3]}" == "EMPTY" ]; then
- targetJson=$targetJson"\"\","
- else
- targetJson=$targetJson"\"${arr[$i+3]}\","
- fi
- file=".p.json"
- sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
- json=$(cat $file)
- targetJson=$targetJson"\"json\":"$json"}"
- done
- fi
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body" "id")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-
-}
-
-# API Test function: GET /policy
-#args: <response-code> <policy-id> [<template-file>]
-# (Function for test scripts)
-api_get_policy() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-id> [<template-file>] " $@
- return 1
- fi
-
- query="/policy?id=$2"
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -eq 3 ]; then
- #Create a policy json to compare with
- body=${res:0:${#res}-3}
- file=".p.json"
- sed 's/XXX/'${2}'/g' $3 > $file
- targetJson=$(< $file)
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: PUT /policy
-# args: <response-code> <service-name> <ric-id> <policytype-id> <policy-id> <template-file> [<count>]
-# (Function for test scripts)
-api_put_policy() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 6 ] || [ $# -gt 7 ]; then
- __print_err "<response-code> <service-name> <ric-id> <policytype-id> <policy-id> <template-file> [<count>]" $@
- return 1
- fi
-
- ric=$3
- count=0
- max=1
-
- if [ $# -eq 7 ]; then
- max=$7
- fi
-
- pid=$5
- file=$6
-
- while [ $count -lt $max ]; do
- query="/policy?id=$pid&ric=$ric&service=$2"
-
- if [ $4 == "NOTYPE" ]; then
- query="/policy?id=$pid&ric=$ric&service=$2"
- else
- query="/policy?id=$pid&ric=$ric&service=$2&type=$4"
- fi
-
- file=".p.json"
- sed 's/XXX/'${pid}'/g' $6 > $file
- res="$(__do_curl_to_agent PUT $query $file)"
- status=${res:${#res}-3}
- echo -ne " Creating "$count"("$max")\033[0K\r"
-
- if [ $status -ne $1 ]; then
- let pid=$pid+1
- echo " Created "$count"?("$max")"
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- let pid=$pid+1
- let count=$count+1
- echo -ne " Created "$count"("$max")\033[0K\r"
- done
- echo ""
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-
-# API Test function: DELETE /policy
-# args: <response-code> <policy-id> [count]
-# (Function for test scripts)
-api_delete_policy() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-id> [count]" $@
- return 1
- fi
-
- count=0
- max=1
-
- if [ $# -eq 3 ]; then
- max=$3
- fi
-
- pid=$2
-
- while [ $count -lt $max ]; do
- query="/policy?id="$pid
- res="$(__do_curl_to_agent DELETE $query)"
- status=${res:${#res}-3}
- echo -ne " Deleting "$count"("$max")\033[0K\r"
-
- if [ $status -ne $1 ]; then
- echo " Deleted "$count"?("$max")"
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
- let pid=$pid+1
- let count=$count+1
- echo -ne " Deleted "$count"("$max")\033[0K\r"
- done
- echo ""
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: GET /policy_ids
-# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
-# (Function for test scripts)
-api_get_policy_ids() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 4 ]; then
- __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
- return 1
- fi
-
- queryparams=""
-
- if [ $2 != "NORIC" ]; then
- queryparams="?ric="$2
- fi
-
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service="$3
- else
- queryparams=$queryparams"&service="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?type="$4
- else
- queryparams=$queryparams"&type="$4
- fi
- fi
-
- query="/policy_ids"$queryparams
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 4 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for pid in ${@:5} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $pid != "NOID" ]; then
- targetJson=$targetJson"\"$pid\""
- fi
- done
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: GET /policy_schema
-# args: <response-code> <policy-type-id> [<schema-file>]
-# (Function for test scripts)
-api_get_policy_schema() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
- return 1
- fi
-
- query="/policy_schema?id=$2"
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -eq 3 ]; then
-
- body=${res:0:${#res}-3}
-
- targetJson=$(< $3)
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: GET /policy_schemas
-# args: <response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*
-# (Function for test scripts)
-api_get_policy_schemas() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 2 ]; then
- __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
- return 1
- fi
-
- query="/policy_schemas"
- if [ $2 != "NORIC" ]; then
- query=$query"?ric="$2
- fi
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for file in ${@:3} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $file == "NOFILE" ]; then
- targetJson=$targetJson"{}"
- else
- targetJson=$targetJson$(< $3)
- fi
- done
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: GET /policy_status
-# arg: <response-code> <policy-id> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)
-# (Function for test scripts)
-api_get_policy_status() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
- if [ $# -lt 4 ] || [ $# -gt 5 ]; then
- __print_err "<response-code> <policy-id> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
- return 1
- fi
-
- targetJson=""
-
- if [ $3 == "STD" ]; then
- targetJson="{\"enforceStatus\":\"$4\""
- if [ $# -eq 5 ]; then
- targetJson=$targetJson",\"reason\":\"$5\""
- fi
- targetJson=$targetJson"}"
- elif [ $3 == "OSC" ]; then
- targetJson="{\"instance_status\":\"$4\""
- if [ $# -eq 5 ]; then
- targetJson=$targetJson",\"has_been_deleted\":\"$5\""
- fi
- targetJson=$targetJson",\"created_at\":\"????\"}"
- else
- __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
- return 1
- fi
-
- query="/policy_status?id="$2
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- body=${res:0:${#res}-3}
- res=$(python ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API Test function: GET /policy_types
-# args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
-# (Function for test scripts)
-api_get_policy_types() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 1 ]; then
- __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
- return 1
- fi
-
- if [ $# -eq 1 ]; then
- query="/policy_types"
- elif [ $2 == "NORIC" ]; then
- query="/policy_types"
- else
- query="/policy_types?ric=$2"
- fi
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for pid in ${@:3} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $pid == "EMPTY" ]; then
- pid=""
- fi
- targetJson=$targetJson"\"$pid\""
- done
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-#########################################################
-#### Test case functions Health check
-#########################################################
-
-# API Test function: GET /status
-# args: <response-code>
-# (Function for test scripts)
-api_get_status() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
- if [ $# -ne 1 ]; then
- __print_err "<response-code>" $@
- return 1
- fi
- query="/status"
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-#########################################################
-#### Test case functions RIC Repository
-#########################################################
-
-# API Test function: GET /ric
-# args: <reponse-code> <management-element-id> [<ric-id>]
-# (Function for test scripts)
-api_get_ric() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
- return 1
- fi
-
- query="/ric?managedElementId="$2
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -eq 3 ]; then
- body=${res:0:${#res}-3}
- if [ "$body" != "$3" ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API test function: GET /rics
-# args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
-# example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
-# format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
-# (Function for test scripts)
-api_get_rics() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 2 ]; then
- __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
- return 1
- fi
-
- query="/rics"
- if [ $2 != "NOTYPE" ]; then
- query="/rics?policyType="$2
- fi
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- res=$(python ../common/create_rics_json.py ".tmp_rics.json" "$3" )
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, could not create target ric info json"$ERED
- ((RES_FAIL++))
- return 1
- fi
-
- targetJson=$(<.tmp_rics.json)
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-##################################################################
-#### API Test case functions Service registry and supervision ####
-##################################################################
-
-# API test function: PUT /service
-# args: <response-code> <service-name> <keepalive-timeout> <callbackurl>
-# (Function for test scripts)
-api_put_service() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
- if [ $# -ne 4 ]; then
- __print_err "<response-code> <service-name> <keepalive-timeout> <callbackurl>" $@
- return 1
- fi
-
- query="/service"
- json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
- file=".tmp.json"
- echo "$json" > $file
-
- res="$(__do_curl_to_agent PUT $query $file)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API test function: GET /services
-#args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
-# (Function for test scripts)
-api_get_services() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- #Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
- paramError=1
- if [ $# -eq 1 ]; then
- paramError=0
- elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
- paramError=0
- elif [ $# -eq 5 ]; then
- paramError=0
- elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
- argLen=$(($#-2))
- if [ $(($argLen%3)) -eq 0 ]; then
- paramError=0
- fi
- fi
-
- if [ $paramError -ne 0 ]; then
- __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
- return 1
- fi
-
- query="/services"
-
- if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
- query="/services?name="$2
- fi
-
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- variableArgCount=$(($#-2))
- body=${res:0:${#res}-3}
- targetJson="["
- shift; shift;
- cntr=0
- while [ $cntr -lt $variableArgCount ]; do
- servicename=$1; shift;
- timeout=$1; shift;
- callback=$1; shift;
- if [ $cntr -gt 0 ]; then
- targetJson=$targetJson","
- fi
- # timeSinceLastActivitySeconds value cannot be checked since value varies
- targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
- let cntr=cntr+3
- done
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body" "serviceName")
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API test function: GET /services (only checking service names)
-# args: <response-code> [<service-name>]*"
-# (Function for test scripts)
-api_get_service_ids() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -lt 1 ]; then
- __print_err "<response-code> [<service-name>]*" $@
- return 1
- fi
-
- query="/services"
- res="$(__do_curl_to_agent GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- body=${res:0:${#res}-3}
- targetJson="["
- for rapp in ${@:2} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
- done
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body" "serviceName")
-
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL, returned body not correct"$ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API test function: DELETE /services
-# args: <response-code> <service-name>
-# (Function for test scripts)
-api_delete_services() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -ne 2 ]; then
- __print_err "<response-code> <service-name>" $@
- return 1
- fi
-
- query="/services?name="$2
- res="$(__do_curl_to_agent DELETE $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
-# API test function: PUT /services/keepalive
-# args: <response-code> <service-name>
-# (Function for test scripts)
-api_put_services_keepalive() {
- echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
- echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- ((RES_TEST++))
-
- if [ $# -ne 2 ]; then
- __print_err "<response-code> <service-name>" $@
- return 1
- fi
-
- query="/services/keepalive?name="$2
- res="$(__do_curl_to_agent PUT $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
- ((RES_FAIL++))
- return 1
- fi
-
- ((RES_PASS++))
- echo -e $GREEN" PASS"$EGREEN
- return 0
-}
-
Code Review / nonrtric.git / blobdiff