--- /dev/null
+#
+## Copyright (C) 2019 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+RPM_POSTPROCESS_COMMANDS_append = "wrl_installer;"
+do_rootfs[vardeps] += "INSTALLER_TARGET_BUILD INSTALLER_TARGET_IMAGE"
+
+# Fix system-shutdown hang at ratelimiting
+APPEND_append = " printk.devkmsg=on"
+
+INSTPRODUCT ?= "${DISTRO_NAME}"
+INSTVER ?= "${DISTRO_VERSION}"
+INSTBUGURL ?= "http://www.windriver.com/"
+
+# NOTE: Please update anaconda-init when you change INSTALLER_CONFDIR, use "="
+# but not "?=" since this is not configurable.
+INSTALLER_CONFDIR = "${IMAGE_ROOTFS}/installer-config"
+KICKSTART_FILE ??= ""
+KICKSTART_FILE_EXTRA ??= ""
+WRL_INSTALLER_CONF ?= ""
+REPO_EXCLUDE_PKG ?= ""
+
+build_iso_prepend() {
+ install -d ${ISODIR}
+ ln -snf /.discinfo ${ISODIR}/.discinfo
+ ln -snf /.buildstamp ${ISODIR}/.buildstamp
+ ln -snf /Packages ${ISODIR}/Packages
+}
+
+build_iso_append() {
+ implantisomd5 ${IMGDEPLOYDIR}/${IMAGE_NAME}.iso
+}
+
+# Check WRL_INSTALLER_CONF and copy it to
+# ${IMAGE_ROOTFS}/.buildstamp.$prj_name when exists
+wrl_installer_copy_buildstamp() {
+ prj_name=$1
+ buildstamp=$2
+ if [ -f $buildstamp ]; then
+ bbnote "Using $buildstamp as the buildstamp"
+ cp $buildstamp ${IMAGE_ROOTFS}/.buildstamp.$prj_name
+ else
+ bbfatal "Can't find WRL_INSTALLER_CONF: $buildstamp"
+ fi
+}
+
+# Hardlink when possible, otherwise copy.
+# $1: src
+# $2: target
+wrl_installer_hardlinktree() {
+ src_dev="`stat -c %d $1`"
+ if [ -e "$2" ]; then
+ tgt_dev="`stat -c %d $2`"
+ else
+ tgt_dev="`stat -c %d $(dirname $2)`"
+ fi
+ hdlink=""
+ if [ "$src_dev" = "$tgt_dev" ]; then
+ hdlink="--link"
+ fi
+ cp -rvf $hdlink $1 $2
+}
+
+wrl_installer_copy_local_repos() {
+ deploy_dir_rpm=$1
+
+ if [ -d "$deploy_dir_rpm" ]; then
+ echo "Copy rpms from target build to installer image."
+ mkdir -p ${IMAGE_ROOTFS}/Packages.$prj_name
+
+ : > ${IMAGE_ROOTFS}/Packages.$prj_name/.treeinfo
+ echo "[general]" >> ${IMAGE_ROOTFS}/Packages.$prj_name/.treeinfo
+ echo "version = ${DISTRO_VERSION}" >> ${IMAGE_ROOTFS}/Packages.$prj_name/.treeinfo
+
+ # Determine the max channel priority
+ channel_priority=5
+ for pt in $installer_target_archs ; do
+ channel_priority=$(expr $channel_priority + 5)
+ done
+
+ : > ${IMAGE_ROOTFS}/Packages.$prj_name/.feedpriority
+ for arch in $installer_target_archs; do
+ if [ -d "$deploy_dir_rpm/"$arch -a ! -d "${IMAGE_ROOTFS}/Packages.$prj_name/"$arch ]; then
+ channel_priority=$(expr $channel_priority - 5)
+ echo "$channel_priority $arch" >> ${IMAGE_ROOTFS}/Packages.$prj_name/.feedpriority
+ wrl_installer_hardlinktree "$deploy_dir_rpm/"$arch "${IMAGE_ROOTFS}/Packages.$prj_name/."
+ fi
+ done
+
+ for pkg in ${REPO_EXCLUDE_PKG}; do
+ rm -rf ${IMAGE_ROOTFS}/Packages.$prj_name/${pkg}
+ done
+
+ createrepo_c --update -q ${IMAGE_ROOTFS}/Packages.$prj_name/
+ fi
+}
+
+# Update .buildstamp and copy rpm packages to IMAGE_ROOTFS
+wrl_installer_copy_pkgs() {
+
+ target_build="$1"
+ target_image="$2"
+ prj_name="$3"
+ if [ -n "$4" ]; then
+ installer_conf="$4"
+ else
+ installer_conf=""
+ fi
+
+ common_grep="-e '^ALL_MULTILIB_PACKAGE_ARCHS=.*' \
+ -e '^MULTILIB_VARIANTS=.*' -e '^PACKAGE_ARCHS=.*'\
+ -e '^PACKAGE_ARCH=.*' -e '^PACKAGE_INSTALL_ATTEMPTONLY=.*' \
+ -e '^DISTRO=.*' -e '^DISTRO_NAME=.*' -e '^DISTRO_VERSION=.*' \
+ "
+
+ if [ -f "$installer_conf" ]; then
+ eval "grep -e \"^PACKAGE_INSTALL=.*\" $common_grep $installer_conf \
+ | sed -e 's/=/=\"/' -e 's/$/\"/' > ${BB_LOGFILE}.distro_vals"
+
+ eval "cat $target_build/installersupport_$target_image | \
+ grep -e '^WORKDIR=.*' >> ${BB_LOGFILE}.distro_vals"
+
+ eval `cat ${BB_LOGFILE}.distro_vals`
+ if [ $? -ne 0 ]; then
+ bbfatal "Something is wrong in $installer_conf, please correct it"
+ fi
+ if [ -z "$PACKAGE_ARCHS" -o -z "$PACKAGE_INSTALL" ]; then
+ bbfatal "PACKAGE_ARCHS or PACKAGE_INSTALL is null, please check $installer_conf"
+ fi
+ else
+ eval "cat $target_build/installersupport_$target_image | \
+ grep $common_grep -e '^PN=.*' -e '^SUMMARY=.*' -e '^WORKDIR=.*'\
+ -e '^DESCRIPTION=.*' -e '^export PACKAGE_INSTALL=.*' > ${BB_LOGFILE}.distro_vals"
+
+ eval `cat ${BB_LOGFILE}.distro_vals`
+ fi
+
+ export installer_default_arch="$PACKAGE_ARCH"
+ # Reverse it for priority
+ export installer_default_archs="`for arch in $PACKAGE_ARCHS; do echo $arch; done | tac | tr - _`"
+ installer_target_archs="$installer_default_archs"
+ if [ -n "$MULTILIB_VARIANTS" ]; then
+ export MULTILIB_VARIANTS
+ mlarchs_reversed="`for mlarch in $ALL_MULTILIB_PACKAGE_ARCHS; do echo $mlarch; \
+ done | tac | tr - _`"
+ for arch in $mlarchs_reversed; do
+ if [ "$arch" != "noarch" -a "$arch" != "all" -a "$arch" != "any" ]; then
+ installer_target_archs="$installer_target_archs $arch"
+ fi
+ done
+ fi
+ export installer_target_archs
+
+ # Save the vars to .buildstamp when no installer_conf
+ if [ ! -f "$installer_conf" ]; then
+ cat >> ${IMAGE_ROOTFS}/.buildstamp.$prj_name <<_EOF
+DISTRO=$DISTRO
+DISTRO_NAME=$DISTRO_NAME
+DISTRO_VERSION=$DISTRO_VERSION
+
+[Rootfs]
+LIST=$PN
+
+[$PN]
+SUMMARY=$SUMMARY
+DESCRIPTION=$DESCRIPTION
+
+PACKAGE_INSTALL=$PACKAGE_INSTALL
+PACKAGE_INSTALL_ATTEMPTONLY=$PACKAGE_INSTALL_ATTEMPTONLY
+ALL_MULTILIB_PACKAGE_ARCHS=$ALL_MULTILIB_PACKAGE_ARCHS
+MULTILIB_VARIANTS=$MULTILIB_VARIANTS
+PACKAGE_ARCHS=$PACKAGE_ARCHS
+PACKAGE_ARCH=$PACKAGE_ARCH
+IMAGE_LINGUAS=${IMAGE_LINGUAS}
+_EOF
+ fi
+
+ if [ -d "$WORKDIR/oe-rootfs-repo/rpm" ]; then
+ # Copy local repos while the image is not initramfs
+ bpn=${BPN}
+ if [ "${bpn##*initramfs}" = "${bpn%%initramfs*}" ]; then
+ wrl_installer_copy_local_repos $WORKDIR/oe-rootfs-repo/rpm
+ fi
+ echo "$DISTRO::$prj_name::$DISTRO_NAME::$DISTRO_VERSION" >> ${IMAGE_ROOTFS}/.target_build_list
+ fi
+}
+
+wrl_installer_get_count() {
+ sum=0
+ for i in $*; do
+ sum=$(expr $sum + 1)
+ done
+ echo $sum
+}
+
+wrl_installer[vardepsexclude] = "DATETIME"
+wrl_installer() {
+ cat >${IMAGE_ROOTFS}/.discinfo <<_EOF
+${DATETIME}
+${DISTRO_NAME} ${DISTRO_VERSION}
+${TARGET_ARCH}
+_EOF
+
+ : > ${IMAGE_ROOTFS}/.target_build_list
+ counter=0
+ targetimage_counter=0
+ for target_build in ${INSTALLER_TARGET_BUILD}; do
+ target_build="`readlink -f $target_build`"
+ echo "Installer Target Build: $target_build"
+ counter=$(expr $counter + 1)
+ prj_name="`echo $target_build | sed -e 's#/ *$##g' -e 's#.*/##'`"
+ prj_name="$prj_name-$counter"
+
+ # Generate .buildstamp
+ if [ -n "${WRL_INSTALLER_CONF}" ]; then
+ installer_conf="`echo ${WRL_INSTALLER_CONF} | awk '{print $'"$counter"'}'`"
+ wrl_installer_copy_buildstamp $prj_name $installer_conf
+ else
+ cat >${IMAGE_ROOTFS}/.buildstamp.$prj_name <<_EOF
+[Main]
+Product=${INSTPRODUCT}
+Version=${INSTVER}
+BugURL=${INSTBUGURL}
+IsFinal=True
+UUID=${DATETIME}.${TARGET_ARCH}
+_EOF
+ fi
+
+ if [ -f "$target_build" ]; then
+ filename=$(basename "$target_build")
+ extension="${filename##*.}"
+ bpn=${BPN}
+ # Do not copy image for initramfs
+ if [ "${bpn##*initramfs}" != "${bpn%%initramfs*}" ]; then
+ continue
+ elif [ "x$extension" = "xext2" -o "x$extension" = "xext3" -o "x$extension" = "xext4" ]; then
+ echo "Image based target install selected."
+ mkdir -p "${IMAGE_ROOTFS}/LiveOS.$prj_name"
+ wrl_installer_hardlinktree "$target_build" "${IMAGE_ROOTFS}/LiveOS.$prj_name/rootfs.img"
+ echo "::$prj_name::" >> ${IMAGE_ROOTFS}/.target_build_list
+ else
+ bberror "Unsupported image: $target_build."
+ bberror "The image must be ext2, ext3 or ext4"
+ exit 1
+ fi
+ elif [ -d "$target_build" ]; then
+ targetimage_counter=$(expr $targetimage_counter + 1)
+ target_image="`echo ${INSTALLER_TARGET_IMAGE} | awk '{print $'"$targetimage_counter"'}'`"
+ echo "Target Image: $target_image"
+ wrl_installer_copy_pkgs $target_build $target_image $prj_name $installer_conf
+ else
+ bberror "Invalid configuration of INSTALLER_TARGET_BUILD: $target_build."
+ bberror "It must either point to an image (ext2, ext3 or ext4) or to the root of another build directory"
+ exit 1
+ fi
+
+ ks_cfg="${INSTALLER_CONFDIR}/ks.cfg.$prj_name"
+ if [ -n "${KICKSTART_FILE}" ]; then
+ ks_file="`echo ${KICKSTART_FILE} | awk '{print $'"$counter"'}'`"
+ bbnote "Copying kickstart file $ks_file to $ks_cfg ..."
+ mkdir -p ${INSTALLER_CONFDIR}
+ cp $ks_file $ks_cfg
+ fi
+ if [ -n "${KICKSTART_FILE_EXTRA}" ]; then
+ for ks_file in ${KICKSTART_FILE_EXTRA}; do
+ if [ -f $ks_file ]; then
+ cp $ks_file ${INSTALLER_CONFDIR}
+ else
+ bbwarn "The kickstart file $ks_file in KICKSTART_FILE_EXTRA doesn't exist!"
+ fi
+ done
+ fi
+ done
+
+ # Setup the symlink if only one target build dir.
+ if [ "$counter" = "1" ]; then
+ prj_name="`awk -F:: '{print $2}' ${IMAGE_ROOTFS}/.target_build_list`"
+ entries=".buildstamp LiveOS Packages installer-config/ks.cfg"
+ for i in $entries; do
+ if [ -e ${IMAGE_ROOTFS}/$i.$prj_name ]; then
+ ln -sf `basename $i.$prj_name` ${IMAGE_ROOTFS}/$i
+ fi
+ done
+ fi
+}
+
+python __anonymous() {
+ if "selinux" in d.getVar("DISTRO_FEATURES", True).split():
+ raise bb.parse.SkipPackage("Unable to build the installer when selinux is enabled.")
+
+ if bb.data.inherits_class('image', d):
+ if d.getVar("DISTRO", True) != "anaconda":
+ raise bb.parse.SkipPackage("Set DISTRO = 'anaconda' in local.conf")
+
+ target_builds = d.getVar('INSTALLER_TARGET_BUILD', True)
+ if not target_builds:
+ errmsg = "No INSTALLER_TARGET_BUILD is found,\n"
+ errmsg += "set INSTALLER_TARGET_BUILD = '<target-build-topdir>' and\n"
+ errmsg += "INSTALLER_TARGET_IMAGE = '<target-image-pn>' to do RPMs\n"
+ errmsg += "install, or\n"
+ errmsg += "set INSTALLER_TARGET_BUILD = '<target-build-image>' to do\n"
+ errmsg += "image copy install"
+ raise bb.parse.SkipPackage(errmsg)
+
+ count = 0
+ for target_build in target_builds.split():
+ if not os.path.exists(target_build):
+ raise bb.parse.SkipPackage("The %s of INSTALLER_TARGET_BUILD does not exist" % target_build)
+
+ if os.path.isdir(target_build):
+ count += 1
+
+ # While do package management install
+ if count > 0:
+ target_images = d.getVar('INSTALLER_TARGET_IMAGE', True)
+ if not target_images:
+ errmsg = "The INSTALLER_TARGET_BUILD is a dir, but not found INSTALLER_TARGET_IMAGE,\n"
+ errmsg += "set INSTALLER_TARGET_IMAGE = '<target-image-pn>' to do RPMs install"
+ raise bb.parse.SkipPackage(errmsg)
+
+ elif count != len(target_images.split()):
+ errmsg = "The INSTALLER_TARGET_BUILD has %s build dirs: %s\n" % (count, target_builds)
+ errmsg += "But INSTALLER_TARGET_IMAGE has %s build images: %s\n" % (len(target_images.split()), target_images)
+ raise bb.parse.SkipPackage(errmsg)
+
+ # The count of INSTALLER_TARGET_BUILD and WRL_INSTALLER_CONF must match when set.
+ wrlinstaller_confs = d.getVar('WRL_INSTALLER_CONF', True)
+ if wrlinstaller_confs:
+ if len(wrlinstaller_confs.split()) != len(target_builds.split()):
+ raise bb.parse.SkipPackage("The count of INSTALLER_TARGET_BUILD and WRL_INSTALLER_CONF not match!")
+ for wrlinstaller_conf in wrlinstaller_confs.split():
+ if not os.path.exists(wrlinstaller_conf):
+ raise bb.parse.SkipPackage("The installer conf %s in WRL_INSTALLER_CONF doesn't exist!" % wrlinstaller_conf)
+
+ # The count of INSTALLER_TARGET_BUILD and KICKSTART_FILE must match when set.
+ kickstart_files = d.getVar('KICKSTART_FILE', True)
+ if kickstart_files:
+ if len(kickstart_files.split()) != len(target_builds.split()):
+ raise bb.parse.SkipPackage("The count of INSTALLER_TARGET_BUILD and KICKSTART_FILE not match!")
+ for kickstart_file in kickstart_files.split():
+ if not os.path.exists(kickstart_file):
+ raise bb.parse.SkipPackage("The kickstart file %s in KICKSTART_FILE doesn't exist!" % kickstart_file)
+
+}
+
+python build_syslinux_cfg () {
+ import copy
+ import sys
+
+ workdir = d.getVar('WORKDIR')
+ if not workdir:
+ bb.error("WORKDIR not defined, unable to package")
+ return
+
+ cfile = d.getVar('SYSLINUX_CFG')
+ if not cfile:
+ bb.fatal('Unable to read SYSLINUX_CFG')
+}
Code Review / pti / rtp.git / blobdiff