meta-starlingx: remove the upstream layer

[pti/rtp.git] / meta-starlingx / meta-stx-integ / recipes-connectivity / openssh / files / stx / sshd.init

diff --git a/meta-starlingx/meta-stx-integ/recipes-connectivity/openssh/files/stx/sshd.init b/meta-starlingx/meta-stx-integ/recipes-connectivity/openssh/files/stx/sshd.init
deleted file mode 100755 (executable)
index 5430632..0000000
--- a/meta-starlingx/meta-stx-integ/recipes-connectivity/openssh/files/stx/sshd.init
+++ /dev/null
@@ -1,192 +0,0 @@
-#!/bin/bash
-#
-# sshd         Start up the OpenSSH server daemon
-#
-# chkconfig: 2345 55 25
-# description: SSH is a protocol for secure remote shell access. \
-#              This service starts up the OpenSSH server daemon.
-#
-# processname: sshd
-# config: /etc/ssh/ssh_host_key
-# config: /etc/ssh/ssh_host_key.pub
-# config: /etc/ssh/ssh_random_seed
-# config: /etc/ssh/sshd_config
-# pidfile: /var/run/sshd.pid
-
-### BEGIN INIT INFO
-# Provides: sshd
-# Required-Start: $local_fs $network $syslog
-# Required-Stop: $local_fs $syslog
-# Should-Start: $syslog
-# Should-Stop: $network $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Start up the OpenSSH server daemon
-# Description:       SSH is a protocol for secure remote shell access.
-#                   This service starts up the OpenSSH server daemon.
-### END INIT INFO
-
-# source function library
-. /etc/init.d/functions
-
-# pull in sysconfig settings
-[ -f /etc/sysconfig/sshd ] && . /etc/sysconfig/sshd
-
-RETVAL=0
-prog="sshd"
-lockfile=/var/lock/subsys/$prog
-
-# Some functions to make the below more readable
-SSHD=/usr/sbin/sshd
-XPID_FILE=/var/run/sshd.pid
-PID_FILE=/var/run/sshd-s.pid
-
-runlevel=$(set -- $(runlevel); eval "echo \$$#" )
-
-do_restart_sanity_check()
-{
-       $SSHD -t
-       RETVAL=$?
-       if [ $RETVAL -ne  0 ]; then
-               failure $"Configuration file or keys are invalid"
-               echo
-       fi
-}
-
-start()
-{
-       [ -x $SSHD ] || exit 5
-       [ -f /etc/ssh/sshd_config ] || exit 6
-       # Create keys if necessary
-       /usr/sbin/sshd-keygen
-
-        # In rare instances, sshd may be started but a pid
-        # file is not generated. This is seen usually during
-        # system reboot scenarios. A subsequent attempt to start
-        # sshd here will trigger a port bind error. As a sanity
-        # check attempt a kill call (mostly redundant) to any
-        # previously running sshd instance
-        /bin/kill `/bin/pidof "$SSHD"` >/dev/null 2>&1
-
-       echo -n $"Starting $prog: "
-       $SSHD $OPTIONS && success || failure
-       RETVAL=$?
-       [ $RETVAL -eq 0 ] && touch $lockfile
-       [ $RETVAL -eq 0 ] && cp -f $XPID_FILE $PID_FILE
-       echo
-       return $RETVAL
-}
-
-stop()
-{
-
-       echo -n $"Stopping $prog: "
-       if [ ! -f "$PID_FILE" ]; then
-               # not running; per LSB standards this is "ok"
-               action $"Stopping $prog: " /bin/true
-               return 0
-       fi
-       PID=`cat "$PID_FILE"`
-       if [ -n "$PID" ]; then
-               /bin/kill "$PID" >/dev/null 2>&1
-               RETVAL=$?
-               if [ $RETVAL -eq 0 ]; then
-                       RETVAL=1
-                       action $"Stopping $prog: " /bin/false
-               else
-                       action $"Stopping $prog: " /bin/true
-               fi
-       else
-                # failed to read pidfile
-               action $"Stopping $prog: " /bin/false
-               RETVAL=4
-       fi
-       # if we are in halt or reboot runlevel kill all running sessions
-       # so the TCP connections are closed cleanly
-       if [ "x$runlevel" = x0 -o "x$runlevel" = x6 ] ; then
-           trap '' TERM
-           killall $prog 2>/dev/null
-           trap TERM
-       fi
-       [ $RETVAL -eq 0 ] && rm -f $lockfile
-       rm -f "$PID_FILE"
-        return $RETVAL
-}
-
-reload()
-{
-       echo -n $"Reloading $prog: "
-       if [ -n "`pidfileofproc $SSHD`" ] ; then
-           killproc $SSHD -HUP
-       else
-           failure $"Reloading $prog"
-       fi
-       RETVAL=$?
-       echo
-}
-
-restart() {
-       stop
-       start
-}
-
-force_reload() {
-       restart
-}
-
-rh_status() {
-       status -p $PID_FILE openssh-daemon
-}
-
-rh_status_q() {
-       rh_status >/dev/null 2>&1
-}
-
-case "$1" in
-       start)
-               rh_status_q && exit 0
-               start
-               ;;
-       stop)
-               if ! rh_status_q; then
-                       rm -f $lockfile
-                       exit 0
-               fi
-               stop
-               ;;
-       restart)
-               restart
-               ;;
-       reload)
-               rh_status_q || exit 7
-               reload
-               ;;
-       force-reload)
-               force_reload
-               ;;
-       condrestart|try-restart)
-               rh_status_q || exit 0
-               if [ -f $lockfile ] ; then
-                       do_restart_sanity_check
-                       if [ $RETVAL -eq 0 ] ; then
-                               stop
-                               # avoid race
-                               sleep 3
-                               start
-                       else
-                               RETVAL=6
-                       fi
-               fi
-               ;;
-       status)
-               rh_status
-               RETVAL=$?
-               if [ $RETVAL -eq 3 -a -f $lockfile ] ; then
-                       RETVAL=2
-               fi
-               ;;
-       *)
-               echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-               RETVAL=2
-esac
-exit $RETVAL