meta-starlingx: remove the upstream layer

[pti/rtp.git] / meta-starlingx / meta-stx-cloud / recipes-support / cluster-resource-agents / resource-agents / stx / lvm_vg_activation.patch

diff --git a/meta-starlingx/meta-stx-cloud/recipes-support/cluster-resource-agents/resource-agents/stx/lvm_vg_activation.patch b/meta-starlingx/meta-stx-cloud/recipes-support/cluster-resource-agents/resource-agents/stx/lvm_vg_activation.patch
deleted file mode 100644 (file)
index abb7c58..0000000
--- a/meta-starlingx/meta-stx-cloud/recipes-support/cluster-resource-agents/resource-agents/stx/lvm_vg_activation.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 577055560d55b388d479ef398ffd839792dc1996 Mon Sep 17 00:00:00 2001
-From: Scott Little <scott.little@windriver.com>
-Date: Mon, 2 Oct 2017 15:12:54 -0400
-Subject: [PATCH 06/13] WRS: Patch1110: lvm_vg_activation.patch
-
----
- heartbeat/LVM | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 116 insertions(+), 1 deletion(-)
-
-diff --git a/heartbeat/LVM b/heartbeat/LVM
-index b0ca87a..38092f9 100755
---- a/heartbeat/LVM
-+++ b/heartbeat/LVM
-@@ -222,6 +222,81 @@ LVM_status() {
- }
- 
- #
-+#    Activate one volume explicitly.
-+#
-+activate_volume() {
-+        ocf_run lvchange $1 /dev/${2}/$3
-+        if [ $? -eq 0 ] ; then
-+            ocf_log info "Succesfully activated $LV."
-+        else
-+            ocf_log err "Problem activating $LV."
-+        fi
-+}
-+
-+#
-+#    Kick off parallel activation of all volumes
-+#
-+activate_all_volumes() {
-+   VG=$1
-+   shift
-+   lvchange_args="$*"
-+
-+   # Get the list of volumes, without the first line which is column headings.
-+   VOLS=`lvs $VG |tail -n +2`
-+
-+   while read -r LINE; do
-+       # Convert the line into an array.
-+       LINE_ARRAY=($LINE)
-+
-+       # First array element is the volume/snapshot name.
-+       LV=${LINE_ARRAY[0]}
-+
-+       # Third array element is the attributes.
-+       ATTR=${LINE_ARRAY[2]}
-+
-+       # Fifth character in the attributes is "a" if it's active.
-+       ACTIVE=${ATTR:4:1}
-+       if [ "$ACTIVE" == "a" ]; then
-+         ocf_log info "$LV is already active."
-+         continue
-+       fi
-+
-+       SNAPSHOT_ORIGIN=${LINE_ARRAY[4]}
-+       if [ "$SNAPSHOT_ORIGIN" != "" ] ; then
-+         # If this is a snapshot, don't activate it.
-+         continue
-+       fi
-+
-+       ( activate_volume "$*" $VG $LV ) &
-+    done <<< "$VOLS"
-+}
-+
-+#
-+#    Scan for inactive volumes and log any that are found.
-+#
-+log_inactive_volumes() {
-+    # Get the list of volumes, without the first line which is column headings.
-+    VOLS=`lvs $1 |tail -n +2`
-+
-+    while read -r LINE; do
-+        # Convert the line into an array.
-+        LINE_ARRAY=($LINE)
-+
-+        # First array element is the volume/snapshot name.
-+        LV=${LINE_ARRAY[0]}
-+
-+        # Third array element is the attributes.
-+        ATTR=${LINE_ARRAY[2]}
-+
-+        # Fifth character in the attributes is "a" if it's active.
-+        ACTIVE=${ATTR:4:1}
-+        if [ "$ACTIVE" != "a" ]; then
-+            ocf_log err "Volume $LV is not active after expiry of timeout."
-+        fi
-+    done <<< "$VOLS"
-+}
-+
-+#
- #     Enable LVM volume
- #
- LVM_start() {
-@@ -241,10 +316,50 @@ LVM_start() {
-               ocf_run vgscan
-       fi
- 
-+       # Kick off activation of all volumes.  If it doesn't complete within
-+      # the timeout period, then we'll log the not-yet-activated volumes and
-+      # continue on.
-       lvm_pre_activate || exit
--      ocf_run vgchange $vgchange_activate_options $vg
-+      (ocf_run vgchange $vgchange_activate_options $1) & PID=$!
-       lvm_post_activate $?
- 
-+      # Check every second for up to TIMEOUT seconds whether the vgchange has
-+      # completed.
-+      TIMEOUT=300
-+      TIMED_OUT=true
-+      SECONDS=0;
-+      PARALLEL_ACTIVATE_DELAY=10
-+      PARALLEL_ACTIVATE_DONE=false
-+      while [ $SECONDS -lt $TIMEOUT ] ; do
-+              kill -0 $PID &> /dev/null
-+              if [ $? -eq 1 ] ; then
-+              # process with pid of $PID doesn't exist, vgchange command completed
-+                      TIMED_OUT=false
-+                      break
-+              fi
-+              if [ $SECONDS -ge $PARALLEL_ACTIVATE_DELAY ] && \
-+                      [ "$PARALLEL_ACTIVATE_DONE" != true ] && \
-+                      [ "$1" == "cinder-volumes" ] ; then
-+                      # This will kick off parallel activation of all LVs in the VG.
-+                      # The delay is to ensure the VG is activated first.
-+                      PARALLEL_ACTIVATE_DONE=true
-+                      ocf_log info Explicitly activating all volumes in $1 with: $vgchange_activate_options
-+                      activate_all_volumes $1 $vgchange_activate_options
-+              fi
-+              sleep 1
-+      done
-+
-+      if [ "$TIMED_OUT" = true ] ; then
-+              ocf_log err "Timed out running ocf_run vgchange $vgchange_activate_options $1"
-+              log_inactive_volumes $1
-+      else
-+              # Child process completed, get its status.
-+              wait $PID
-+              if [ $? -ne 0 ] ; then
-+                      return $OCF_ERR_GENERIC
-+              fi
-+      fi
-+
-       if LVM_status $vg; then
-               : OK Volume $vg activated just fine!
-               return $OCF_SUCCESS 
--- 
-2.7.4
-