.. http://creativecommons.org/licenses/by/4.0
User Guide
-==========
+***********
This is the user guide for Cherry release of O-DU/l2.
:depth: 3
:local:
-A. Compilation:
----------------
-1. Build O-DU High:
-
- a. Build folder
-
- - cd <rsys_directory>/l2/build/odu
-
- b. Build O-DU High binary
-
- - make odu MACHINE=BIT64 MODE=FDD
-
- c. Clean O-DU High binary
-
- - make clean_odu MACHINE=BIT64 MODE=FDD
-
-2. Build CU Stub :
-
- a. Build folder
-
- - cd <rsys_directory>/l2/build/odu
-
- b. Build CU Stub binary
-
- - make cu_stub NODE=TEST_STUB MACHINE=BIT64 MODE=FDD
-
- c. Clean CU Stub binary
-
- - make clean_cu NODE=TEST_STUB MACHINE=BIT64 MODE=FDD
-
-3. Build RIC Stub :
-
- a. Build folder
-
- - cd <rsys_directory>/l2/build/odu
-
- b. Build RIC Stub binary
-
- - make ric_stub NODE=TEST_STUB MACHINE=BIT64 MODE=FDD
-
- c. Clean RIC Stub binary
-
- - make clean_ric NODE=TEST_STUB MACHINE=BIT64 MODE=FDD
-
-4. Clean ODU, CU Stub and RIC Stub together
-
- a. make clean_all
-
-
-B. Execution:
+A. Execution:
-------------
+I. Execution - On locally compiling O-DU High Source Code
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
1. Assign virtual IP addresses as follows:
a. ifconfig <interface name>:ODU "192.168.130.81"
2. Execute CU Stub:
- a. CU execution folder
+ a. Navigate to CU execution folder
- - cd <rsys_directory>/l2/bin/cu_stub
+ - cd <O-DU High Directory>/l2/bin/cu_stub
b. Run CU Stub binary
3. Execute RIC Stub:
- a. RIC execution folder
+ a. Navigate to RIC execution folder
- - cd <rsys_directory>/l2/bin/ric_stub
+ - cd <O-DU High Directory>/l2/bin/ric_stub
b. Run RIC Stub binary
- ./ric_stub
-4. Execute DU:
+4. Execute O-DU High:
- a. DU execution folder
+ a. Navigate to ODU execution folder
- - cd <rsys_directory>/l2/bin/odu
+ - cd <O-DU High Directory>/l2/bin/odu
b. Run ODU binary
PS: CU stub and RIC stub must be run (in no particular sequence) before ODU
+II. Execution - Using Docker Images
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The call flow between O-DU High and CU Stub can be achieved by executing docker containers.
+
+- Pull the last built docker images:
+ - docker pull nexus3.o-ran-sc.org:10004/o-ran-sc/o-du-l2:3.0.1
+ - docker pull nexus3.o-ran-sc.org:10004/o-ran-sc/o-du-l2-cu-stub:3.0.1
+
+- Run CU Stub docker:
+ - docker run -it --privileged --net=host --entrypoint bash
+ nexus3.o-ran-sc.org:10004/o-ran-sc/o-du-l2-cu-stub:3.0.1
+ - ./cu_stub
+
+- Run ODU docker:
+ - docker run -it --privileged --net=host --entrypoint bash
+ nexus3.o-ran-sc.org:10004/o-ran-sc/o-du-l2:3.0.1
+ - ./odu
+
+
+B. Pairwise testing with Intel O-DU Low:
+-----------------------------------------
+
+This section describes the changes required in compilation and execution of O-DU High binaries to successfully integrate
+with Intel O-DU Low in timer mode.
-C. Testing with Intel O-DU Low:
--------------------------------
I. Compilation
^^^^^^^^^^^^^^
1. Build ODU :
- a. Create folder <rsys_directory>/l2/src/wls_lib. Copy wls_lib.h from <intel_directory>/phy/wls_lib/ to
- <rsys_directory>/l2/src/wls_lib.
+ a. Create folder <O-DU High Directory>/l2/src/wls_lib. Copy wls_lib.h from <O-DU Low Directory>/phy/wls_lib/ to
+ <O-DU High Directory>/l2/src/wls_lib.
- b. Create folder <rsys_directory>/l2/src/dpdk_lib. Copy following files from
- <intel_directory>/dpdk-19.11/x86_64-native-linuxapp-gcc/include/ to <rsys_directory>/l2/src/dpdk_lib.
+ b. Create folder <O-DU High Directory>/l2/src/dpdk_lib. Copy following files from
+ <O-DU Low Directory>/dpdk-19.11/x86_64-native-linuxapp-gcc/include/ to <O-DU High Directory>/l2/src/dpdk_lib.
- rte_branch_prediction.h
- rte_common.h
- rte_os.h
- rte_per_lcore.h
- c. Build folder
+ c. Navigate to build folder
- - cd <rsys_directory>/l2/build/odu
+ - cd <O-DU High Directory>/l2/build/odu
d. Build ODU Binary:
- make odu PHY=INTEL_L1 PHY_MODE=TIMER MACHINE=BIT64 MODE=FDD
- 2. Build CU Stub and RIC Stub:
-
- a. Execute steps in sections A.2 and A.3.
II. Execution
^^^^^^^^^^^^^
a. Setup environment:
- - cd <intel_directory>/phy/
+ - cd <O-DU Low Directory>/phy/
- source ./setupenv.sh
b. Run O-DU Low binary :
- - cd <intel_directory>/FlexRAN/l1/bin/nr5g/gnb/l1
+ - cd <O-DU Low Directory>/FlexRAN/l1/bin/nr5g/gnb/l1
- To run in timer mode : ./l1.sh -e
- L1 is up when following prints are seen on console:
a. Setup environment:
- - cd <intel_directory>/phy/
+ - cd <O-DU Low Directory>/phy/
- source ./setupenv.sh
b. Run FAPI translator binary:
- - cd <intel_directory>/phy/fapi_5g/bin/
+ - cd <O-DU Low Directory>/phy/fapi_5g/bin/
- ./oran_5g_fapi --cfg=oran_5g_fapi.cfg
3. Execute CU Stub and RIC Stub:
- a. Run steps in sections B.1-B.3.
+ a. Run steps in sections A.I.1 through A.I.3 .
4. Execute DU:
a. DU execution folder
- - cd <rsys_directory>/l2/bin/odu
+ - cd <O-DU High Directory>/l2/bin/odu
b. Export WLS library path
- - export LD_LIBRARY_PATH=<intel_directory>/phy/wls_lib/lib:$LD_LIBRARY_PATH
+ - export LD_LIBRARY_PATH=<O-DU Low Directory>/phy/wls_lib/lib:$LD_LIBRARY_PATH
c. Run ODU binary
- ./odu
-D. Message Flow:
+C. Message Flow:
----------------
O-DU High opens WLS interface during bring up. Message exchanges can begin once the interface is ready.
-Following diagram shows P5 messages exchange with O-DU Low in timer mode.
+Following diagram shows P5 messages exchanged with O-DU Low in timer mode.
-.. figure:: L1-L2_Message_Flow.jpg
+.. figure:: O-DU_High_Low_Flow.jpg
:width: 600
:alt: Figure 1 O-DU High - O-DU Low Message Flow Diagram
- Figure 1 - O-DU High - O-DU Low Message Flow Diagram
+ Figure 5 - O-DU High - O-DU Low Message Flow Diagram
Note: UL IQ-Sample request and response are needed by Intel O-DU Low in timer mode(testing mode) only. Code changes for
-these are guarded under INTEL_TIMER_MODE flag which can be enabled using compilation option "PHY_MODE=TIMER", as mention
-in section C.I.1.d .
+these are guarded under INTEL_TIMER_MODE flag which can be enabled using compilation option "PHY_MODE=TIMER", as
+mentioned in section B.I.1.d .
Code Review / o-du / l2.git / blobdiff