-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. SPDX-License-Identifier: CC-BY-4.0
-.. CAUTION: this document is generated from source in doc/src/rtd.
-.. To make changes edit the source and recompile the document.
-.. Do NOT make changes directly to .rst or .md files.
-
-============================================================================================
-Man Page: rmr_wh_send_msg
-============================================================================================
-
-
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. SPDX-License-Identifier: CC-BY-4.0
+.. CAUTION: this document is generated from source in doc/src/rtd.
+.. To make changes edit the source and recompile the document.
+.. Do NOT make changes directly to .rst or .md files.
+
+============================================================================================
+Man Page: rmr_wh_send_msg
+============================================================================================
+
+
RMR LIBRARY FUNCTIONS
NAME
----
-rmr_wh_send_msg
+rmr_wh_send_msg
SYNOPSIS
--------
-
-::
-
- #include <rmr/rmr.h>
-
- rmr_mbuf_t* rmr_wh_send_msg( void* vctx, rmr_whid_t id, rmr_mbuf_t* msg )
-
+
+::
+
+ #include <rmr/rmr.h>
+
+ rmr_mbuf_t* rmr_wh_send_msg( void* vctx, rmr_whid_t id, rmr_mbuf_t* msg )
+
DESCRIPTION
-----------
-The ``rmr_wh_send_msg`` function accepts a message buffer
-from the user application and attempts to send it using the
-wormhole ID provided (id). Unlike *rmr_send_msg,* this
-function attempts to send the message directly to a process
-at the other end of a wormhole which was created with
-*rmr_wh_open().* When sending message via wormholes, the
-normal RMR routing based on message type is ignored, and the
-caller may leave the message type unspecified in the message
-buffer (unless it is needed by the receiving process).
-
-*Vctx* is the RMR void context pointer that was returned by
-the ``rmr_init`` function. The message buffer (msg) used to
-send is the same format as used for regular RMR send and
-reply to sender operations, thus any buffer allocated by
-these means, or calls to *rmr_rcv_msg()* can be passed to
-this function.
+The ``rmr_wh_send_msg`` function accepts a message buffer
+from the user application and attempts to send it using the
+wormhole ID provided (id). Unlike *rmr_send_msg,* this
+function attempts to send the message directly to a process
+at the other end of a wormhole which was created with
+*rmr_wh_open().* When sending message via wormholes, the
+normal RMR routing based on message type is ignored, and the
+caller may leave the message type unspecified in the message
+buffer (unless it is needed by the receiving process).
+
+*Vctx* is the RMR void context pointer that was returned by
+the ``rmr_init`` function. The message buffer (msg) used to
+send is the same format as used for regular RMR send and
+reply to sender operations, thus any buffer allocated by
+these means, or calls to *rmr_rcv_msg()* can be passed to
+this function.
Retries
-------
-The send operations in RMR will retry *soft* send failures
-until one of three conditions occurs:
-
-
-* The message is sent without error
-
-* The underlying transport reports a *hard* failure
-
-* The maximum number of retry loops has been attempted
-
-
-A retry loop consists of approximately 1000 send attempts
-**without** any intervening calls to *sleep()* or *usleep().*
-The number of retry loops defaults to 1, thus a maximum of
-1000 send attempts is performed before returning to the user
-application. This value can be set at any point after RMR
-initialisation using the *rmr_set_stimeout()* function
-allowing the user application to completely disable retires
-(set to 0), or to increase the number of retry loops.
+The send operations in RMR will retry *soft* send failures
+until one of three conditions occurs:
+
+
+* The message is sent without error
+
+* The underlying transport reports a *hard* failure
+
+* The maximum number of retry loops has been attempted
+
+
+A retry loop consists of approximately 1000 send attempts
+**without** any intervening calls to *sleep()* or *usleep().*
+The number of retry loops defaults to 1, thus a maximum of
+1000 send attempts is performed before returning to the user
+application. This value can be set at any point after RMR
+initialisation using the *rmr_set_stimeout()* function
+allowing the user application to completely disable retires
+(set to 0), or to increase the number of retry loops.
Transport Level Blocking
------------------------
-The underlying transport mechanism used to send messages is
-configured in *non-blocking* mode. This means that if a
-message cannot be sent immediately the transport mechanism
-will **not** pause with the assumption that the inability to
-send will clear quickly (within a few milliseconds). This
-means that when the retry loop is completely disabled (set to
-0), that the failure to accept a message for sending by the
-underlying mechanisms (software or hardware) will be reported
-immediately to the user application.
-
-It should be noted that depending on the underlying transport
-mechanism being used, it is extremely likely that retry
-conditions will happen during normal operations. These are
-completely out of RMR's control, and there is nothing that
-RMR can do to avoid or mitigate these other than by allowing
-RMR to retry the send operation, and even then it is possible
-(e.g., during connection reattempts), that a single retry
-loop is not enough to guarantee a successful send.
+The underlying transport mechanism used to send messages is
+configured in *non-blocking* mode. This means that if a
+message cannot be sent immediately the transport mechanism
+will **not** pause with the assumption that the inability to
+send will clear quickly (within a few milliseconds). This
+means that when the retry loop is completely disabled (set to
+0), that the failure to accept a message for sending by the
+underlying mechanisms (software or hardware) will be reported
+immediately to the user application.
+
+It should be noted that depending on the underlying transport
+mechanism being used, it is extremely likely that retry
+conditions will happen during normal operations. These are
+completely out of RMR's control, and there is nothing that
+RMR can do to avoid or mitigate these other than by allowing
+RMR to retry the send operation, and even then it is possible
+(e.g., during connection reattempts), that a single retry
+loop is not enough to guarantee a successful send.
RETURN VALUE
------------
-On success, a new message buffer, with an empty payload, is
-returned for the application to use for the next send. The
-state in this buffer will reflect the overall send operation
-state and should be ``RMR_OK.``
-
-If the state in the returned buffer is anything other than
-``RMR_OK,`` the user application may need to attempt a
-retransmission of the message, or take other action depending
-on the setting of ``errno`` as described below.
-
-In the event of extreme failure, a nil pointer is returned.
-In this case the value of ``errno`` might be of some use, for
-documentation, but there will be little that the user
-application can do other than to move on.
+On success, a new message buffer, with an empty payload, is
+returned for the application to use for the next send. The
+state in this buffer will reflect the overall send operation
+state and should be ``RMR_OK.``
+
+If the state in the returned buffer is anything other than
+``RMR_OK,`` the user application may need to attempt a
+retransmission of the message, or take other action depending
+on the setting of ``errno`` as described below.
+
+In the event of extreme failure, a nil pointer is returned.
+In this case the value of ``errno`` might be of some use, for
+documentation, but there will be little that the user
+application can do other than to move on.
ERRORS
------
-The following values may be passed back in the *state* field
-of the returned message buffer.
-
-
- .. list-table::
- :widths: auto
- :header-rows: 0
- :class: borderless
-
- * - **RMR_ERR_WHID**
- -
- The wormhole ID passed in was not associated with an open
- wormhole, or was out of range for a valid ID.
-
- * - **RMR_ERR_NOWHOPEN**
- -
- No wormholes exist, further attempt to validate the ID are
- skipped.
-
- * - **RMR_ERR_BADARG**
- -
- The message buffer pointer did not refer to a valid message.
-
- * - **RMR_ERR_NOHDR**
- -
- The header in the message buffer was not valid or corrupted.
-
-
-
-The following values may be assigned to ``errno`` on failure.
-
- .. list-table::
- :widths: auto
- :header-rows: 0
- :class: borderless
-
- * - **INVAL**
- -
- Parameter(s) passed to the function were not valid, or the
- underlying message processing environment was unable to
- interpret the message.
-
- * - **ENOKEY**
- -
- The header information in the message buffer was invalid.
-
- * - **ENXIO**
- -
- No known endpoint for the message could be found.
-
- * - **EMSGSIZE**
- -
- The underlying transport refused to accept the message
- because of a size value issue (message was not attempted to
- be sent).
-
- * - **EFAULT**
- -
- The message referenced by the message buffer is corrupt (nil
- pointer or bad internal length).
-
- * - **EBADF**
- -
- Internal RMR error; information provided to the message
- transport environment was not valid.
-
- * - **ENOTSUP**
- -
- Sending was not supported by the underlying message
- transport.
-
- * - **EFSM**
- -
- The device is not in a state that can accept the message.
-
- * - **EAGAIN**
- -
- The device is not able to accept a message for sending. The
- user application should attempt to resend.
-
- * - **EINTR**
- -
- The operation was interrupted by delivery of a signal before
- the message was sent.
-
- * - **ETIMEDOUT**
- -
- The underlying message environment timed out during the send
- process.
-
- * - **ETERM**
- -
- The underlying message environment is in a shutdown state.
-
-
+The following values may be passed back in the *state* field
+of the returned message buffer.
+
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **RMR_ERR_WHID**
+ -
+ The wormhole ID passed in was not associated with an open
+ wormhole, or was out of range for a valid ID.
+
+ * - **RMR_ERR_NOWHOPEN**
+ -
+ No wormholes exist, further attempt to validate the ID are
+ skipped.
+
+ * - **RMR_ERR_BADARG**
+ -
+ The message buffer pointer did not refer to a valid message.
+
+ * - **RMR_ERR_NOHDR**
+ -
+ The header in the message buffer was not valid or corrupted.
+
+
+
+The following values may be assigned to ``errno`` on failure.
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **INVAL**
+ -
+ Parameter(s) passed to the function were not valid, or the
+ underlying message processing environment was unable to
+ interpret the message.
+
+ * - **ENOKEY**
+ -
+ The header information in the message buffer was invalid.
+
+ * - **ENXIO**
+ -
+ No known endpoint for the message could be found.
+
+ * - **EMSGSIZE**
+ -
+ The underlying transport refused to accept the message
+ because of a size value issue (message was not attempted to
+ be sent).
+
+ * - **EFAULT**
+ -
+ The message referenced by the message buffer is corrupt (nil
+ pointer or bad internal length).
+
+ * - **EBADF**
+ -
+ Internal RMR error; information provided to the message
+ transport environment was not valid.
+
+ * - **ENOTSUP**
+ -
+ Sending was not supported by the underlying message
+ transport.
+
+ * - **EFSM**
+ -
+ The device is not in a state that can accept the message.
+
+ * - **EAGAIN**
+ -
+ The device is not able to accept a message for sending. The
+ user application should attempt to resend.
+
+ * - **EINTR**
+ -
+ The operation was interrupted by delivery of a signal before
+ the message was sent.
+
+ * - **ETIMEDOUT**
+ -
+ The underlying message environment timed out during the send
+ process.
+
+ * - **ETERM**
+ -
+ The underlying message environment is in a shutdown state.
+
+
EXAMPLE
-------
-The following is a simple example of how the a wormhole is
-created (rmr_wh_open) and then how ``rmr_wh_send_msg``
-function is used to send messages. Some error checking is
-omitted for clarity.
-
-
-::
-
-
- #include <rmr/rmr.h> // system headers omitted for clarity
-
- int main() {
- rmr_whid_t whid = -1; // wormhole id for sending
- void* mrc; //msg router context
- int i;
- rmr_mbuf_t* sbuf; // send buffer
- int count = 0;
- int norm_msg_size = 1500; // most msg fit in this size
-
- mrc = rmr_init( "43086", norm_msg_size, RMRFL_NONE );
- if( mrc == NULL ) {
- fprintf( stderr, "[FAIL] unable to initialise RMR environment\\n" );
- exit( 1 );
- }
-
- while( ! rmr_ready( mrc ) ) { // wait for routing table info
- sleep( 1 );
- }
-
- sbuf = rmr_alloc_msg( mrc, 2048 );
-
- while( 1 ) {
- if( whid < 0 ) {
- whid = rmr_wh_open( mrc, "localhost:6123" ); // open fails if endpoint refuses conn
- if( RMR_WH_CONNECTED( wh ) ) {
- snprintf( sbuf->payload, 1024, "periodic update from sender: %d", count++ );
- sbuf->len = strlen( sbuf->payload );
- sbuf = rmr_wh_send_msg( mrc, whid, sbuf );
- }
- }
-
- sleep( 5 );
- }
- }
-
+The following is a simple example of how the a wormhole is
+created (rmr_wh_open) and then how ``rmr_wh_send_msg``
+function is used to send messages. Some error checking is
+omitted for clarity.
+
+
+::
+
+
+ #include <rmr/rmr.h> // system headers omitted for clarity
+
+ int main() {
+ rmr_whid_t whid = -1; // wormhole id for sending
+ void* mrc; //msg router context
+ int i;
+ rmr_mbuf_t* sbuf; // send buffer
+ int count = 0;
+ int norm_msg_size = 1500; // most msg fit in this size
+
+ mrc = rmr_init( "43086", norm_msg_size, RMRFL_NONE );
+ if( mrc == NULL ) {
+ fprintf( stderr, "[FAIL] unable to initialise RMR environment\\n" );
+ exit( 1 );
+ }
+
+ while( ! rmr_ready( mrc ) ) { // wait for routing table info
+ sleep( 1 );
+ }
+
+ sbuf = rmr_alloc_msg( mrc, 2048 );
+
+ while( 1 ) {
+ if( whid < 0 ) {
+ whid = rmr_wh_open( mrc, "localhost:6123" ); // open fails if endpoint refuses conn
+ if( RMR_WH_CONNECTED( wh ) ) {
+ snprintf( sbuf->payload, 1024, "periodic update from sender: %d", count++ );
+ sbuf->len = strlen( sbuf->payload );
+ sbuf = rmr_wh_send_msg( mrc, whid, sbuf );
+ }
+ }
+
+ sleep( 5 );
+ }
+ }
+
SEE ALSO
--------
-rmr_alloc_msg(3), rmr_call(3), rmr_free_msg(3), rmr_init(3),
-rmr_payload_size(3), rmr_rcv_msg(3), rmr_rcv_specific(3),
-rmr_rts_msg(3), rmr_ready(3), rmr_fib(3), rmr_has_str(3),
-rmr_tokenise(3), rmr_mk_ring(3), rmr_ring_free(3),
-rmr_set_stimeout(3), rmr_wh_open(3), rmr_wh_close(3),
-rmr_wh_state(3)
+rmr_alloc_msg(3), rmr_call(3), rmr_free_msg(3), rmr_init(3),
+rmr_payload_size(3), rmr_rcv_msg(3), rmr_rcv_specific(3),
+rmr_rts_msg(3), rmr_ready(3), rmr_fib(3), rmr_has_str(3),
+rmr_tokenise(3), rmr_mk_ring(3), rmr_ring_free(3),
+rmr_set_stimeout(3), rmr_wh_open(3), rmr_wh_close(3),
+rmr_wh_state(3)
Code Review / ric-plt / lib / rmr.git / blobdiff