-
-
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. SPDX-License-Identifier: CC-BY-4.0
-.. CAUTION: this document is generated from source in doc/src/rtd.
-.. To make changes edit the source and recompile the document.
-.. Do NOT make changes directly to .rst or .md files.
-
-
-============================================================================================
-Man Page: rmr_alloc_msg
-============================================================================================
-
-RMR Library Functions
-============================================================================================
-
-
-NAME
---------------------------------------------------------------------------------------------
-
-rmr_alloc_msg
-
-SYNOPSIS
---------------------------------------------------------------------------------------------
-
-
-::
-
- #include <rmr/rmr.h>
- rmr_mbuf_t* rmr_alloc_msg( void* ctx, int size );
-
-
-
-DESCRIPTION
---------------------------------------------------------------------------------------------
-
-The rmr_alloc_msg function is used to allocate a buffer which
-the user programme can write into and then send through the
-RMR library. The buffer is allocated such that sending it
-requires no additional copying out of the buffer. If the
-value passed in size is less than or equal to 0, then the
-*normal maximum size* supplied on the *rmr_init* call will be
-used. When *size* is greater than zero, the message allocated
-will have at least the indicated number of bytes in the
-payload. There is no maximum size imposed by RMR, however the
-underlying system memory managerment (e.g. malloc) functions
-may impose a limit.
-
-The *ctx* parameter is the void context pointer that was
-returned by the *rmr_init* function.
-
-The pointer to the message buffer returned is a structure
-which has some user application visible fields; the structure
-is described in rmr.h, and is illustrated below.
-
-
-::
-
- typedef struct {
- int state;
- int mtype;
- int len;
- unsigned char* payload;
- unsigned char* xaction;
- int sub_id;
- int tp_state;
- } rmr_mbuf_t;
-
-
-
-
-
-state
-
- Is the current buffer state. Following a call to
- rmr_send_msg the state indicates whether the buffer was
- successfully sent which determines exactly what the
- payload points to. If the send failed, the payload
- referenced by the buffer is the message that failed to
- send (allowing the application to attempt a
- retransmission). When the state is RMR_OK the buffer
- represents an empty buffer that the application may fill
- in in preparation to send.
-
-
-mtype
-
- When sending a message, the application is expected to set
- this field to the appropriate message type value (as
- determined by the user programme). Upon send this value
- determines how the RMR library will route the message. For
- a buffer which has been received, this field will contain
- the message type that was set by the sending application.
-
-
-len
-
- The application using a buffer to send a message is
- expected to set the length value to the actual number of
- bytes that it placed into the message. This is likely less
- than the total number of bytes that the message can carry.
- For a message buffer that is passed to the application as
- the result of a receive call, this will be the value that
- the sending application supplied and should indicate the
- number of bytes in the payload which are valid.
-
-
-payload
-
- The payload is a pointer to the actual received data. The
- user programme may read and write from/to the memory
- referenced by the payload up until the point in time that
- the buffer is used on a rmr_send, rmr_call or rmr_reply
- function call. Once the buffer has been passed back to a
- RMR library function the user programme should **NOT**
- make use of the payload pointer.
-
-
-xaction
-
- The *xaction* field is a pointer to a fixed sized area in
- the message into which the user may write a transaction
- ID. The ID is optional with the exception of when the user
- application uses the rmr_call function to send a message
- and wait for the reply; the underlying RMR processing
- expects that the matching reply message will also contain
- the same data in the *xaction* field.
-
-
-sub_id
-
- This value is the subscription ID. It, in combination with
- the message type is used by rmr to determine the target
- endpoint when sending a message. If the application to
- application protocol does not warrant the use of a
- subscription ID, the RMR constant RMR_VOID_SUBID should be
- placed in this field. When an application is forwarding or
- returning a buffer to the sender, it is the application's
- responsibility to set/reset this value.
-
-
-tp_state
-
- For C applications making use of RMR, the state of a
- transport based failure will often be available via errno.
- However, some wrapper environments may not have direct
- access to the C-lib errno value. RMR send and receive
- operations will place the current value of errno into this
- field which should make it available to wrapper functions.
- User applications are strongly cautioned against relying
- on the value of errno as some transport mechanisms may not
- set this value on all calls. This value should also be
- ignored any time the message status is RMR_OK.
-
-
-RETURN VALUE
---------------------------------------------------------------------------------------------
-
-The function returns a pointer to a rmr_mbuf structure, or
-NULL on error.
-
-ERRORS
---------------------------------------------------------------------------------------------
-
-
-
-ENOMEM
-
- Unable to allocate memory.
-
-
-SEE ALSO
---------------------------------------------------------------------------------------------
-
-rmr_tralloc_msg(3), rmr_call(3), rmr_free_msg(3),
-rmr_init(3), rmr_init_trace(3), rmr_get_trace(3),
-rmr_get_trlen(3), rmr_payload_size(3), rmr_send_msg(3),
-rmr_rcv_msg(3), rmr_rcv_specific(3), rmr_rts_msg(3),
-rmr_ready(3), rmr_fib(3), rmr_has_str(3), rmr_tokenise(3),
-rmr_mk_ring(3), rmr_ring_free(3), rmr_set_trace(3)
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. SPDX-License-Identifier: CC-BY-4.0
+.. CAUTION: this document is generated from source in doc/src/rtd.
+.. To make changes edit the source and recompile the document.
+.. Do NOT make changes directly to .rst or .md files.
+
+============================================================================================
+Man Page: rmr_alloc_msg
+============================================================================================
+
+
+
+
+RMR LIBRARY FUNCTIONS
+=====================
+
+
+
+NAME
+----
+
+rmr_alloc_msg
+
+
+SYNOPSIS
+--------
+
+
+::
+
+ #include <rmr/rmr.h>
+
+ rmr_mbuf_t* rmr_alloc_msg( void* ctx, int size );
+
+
+
+DESCRIPTION
+-----------
+
+The ``rmr_alloc_msg`` function is used to allocate a buffer
+which the user programme can write into and then send through
+the RMR library. The buffer is allocated such that sending it
+requires no additional copying out of the buffer. If the
+value passed in ``size`` is less than or equal to 0, then the
+*normal maximum size* supplied on the *rmr_init* call will be
+used. When *size* is greater than zero, the message allocated
+will have at least the indicated number of bytes in the
+payload. There is no maximum size imposed by RMR, however the
+underlying system memory management (e.g. malloc) functions
+may impose a limit.
+
+The *ctx* parameter is the void context pointer that was
+returned by the *rmr_init* function.
+
+The pointer to the message buffer returned is a structure
+which has some user application visible fields; the structure
+is described in ``rmr.h,`` and is illustrated below.
+
+
+::
+
+ typedef struct {
+ int state;
+ int mtype;
+ int len;
+ unsigned char* payload;
+ unsigned char* xaction;
+ int sub_id;
+ int tp_state;
+ } rmr_mbuf_t;
+
+
+Where:
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **state**
+ -
+ Is the current buffer state. Following a call to
+ ``rmr_send_msg`` the state indicates whether the buffer was
+ successfully sent which determines exactly what the payload
+ points to. If the send failed, the payload referenced by the
+ buffer is the message that failed to send (allowing the
+ application to attempt a retransmission). When the state is
+ ``RMR_OK`` the buffer represents an empty buffer that the
+ application may fill in in preparation to send.
+
+ * - **mtype**
+ -
+ When sending a message, the application is expected to set
+ this field to the appropriate message type value (as
+ determined by the user programme). Upon send this value
+ determines how the RMR library will route the message. For a
+ buffer which has been received, this field will contain the
+ message type that was set by the sending application.
+
+ * - **len**
+ -
+ The application using a buffer to send a message is expected
+ to set the length value to the actual number of bytes that it
+ placed into the message. This is likely less than the total
+ number of bytes that the message can carry. For a message
+ buffer that is passed to the application as the result of a
+ receive call, this will be the value that the sending
+ application supplied and should indicate the number of bytes
+ in the payload which are valid.
+
+ * - **payload**
+ -
+ The payload is a pointer to the actual received data. The
+ user programme may read and write from/to the memory
+ referenced by the payload up until the point in time that the
+ buffer is used on a ``rmr_send, rmr_call`` or
+ ``rmr_reply`` function call. Once the buffer has been passed
+ back to a RMR library function the user programme should
+ **NOT** make use of the payload pointer.
+
+ * - **xaction**
+ -
+ The *xaction* field is a pointer to a fixed sized area in the
+ message into which the user may write a transaction ID. The
+ ID is optional with the exception of when the user
+ application uses the ``rmr_call`` function to send a message
+ and wait for the reply; the underlying RMR processing expects
+ that the matching reply message will also contain the same
+ data in the *xaction* field.
+
+ * - **sub_id**
+ -
+ This value is the subscription ID. It, in combination with
+ the message type is used by rmr to determine the target
+ endpoint when sending a message. If the application to
+ application protocol does not warrant the use of a
+ subscription ID, the RMR constant RMR_VOID_SUBID should be
+ placed in this field. When an application is forwarding or
+ returning a buffer to the sender, it is the application's
+ responsibility to set/reset this value.
+
+ * - **tp_state**
+ -
+ For C applications making use of RMR, the state of a
+ transport based failure will often be available via
+ ``errno.`` However, some wrapper environments may not have
+ direct access to the C-lib ``errno`` value. RMR send and
+ receive operations will place the current value of
+ ``errno`` into this field which should make it available to
+ wrapper functions. User applications are strongly cautioned
+ against relying on the value of errno as some transport
+ mechanisms may not set this value on all calls. This value
+ should also be ignored any time the message status is
+ ``RMR_OK.``
+
+
+
+
+RETURN VALUE
+------------
+
+The function returns a pointer to a ``rmr_mbuf`` structure,
+or NULL on error.
+
+
+ERRORS
+------
+
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **ENOMEM**
+ -
+ Unable to allocate memory.
+
+
+
+
+SEE ALSO
+--------
+
+rmr_tralloc_msg(3), rmr_call(3), rmr_free_msg(3),
+rmr_init(3), rmr_init_trace(3), rmr_get_trace(3),
+rmr_get_trlen(3), rmr_payload_size(3), rmr_send_msg(3),
+rmr_rcv_msg(3), rmr_rcv_specific(3), rmr_rts_msg(3),
+rmr_ready(3), rmr_fib(3), rmr_has_str(3), rmr_tokenise(3),
+rmr_mk_ring(3), rmr_ring_free(3), rmr_set_trace(3)
Code Review / ric-plt / lib / rmr.git / blobdiff