Abstract
--------
-This document describes how to install O-RAN INF image, example configuration for better
-real time performance, and example deployment of Kubernetes cluster and plugins.
+This document describes how to install O-RAN INF image, example configuration (All-in-one Duplex)
+for better real time performance, and example deployment of Kubernetes cluster and plugins.
The audience of this document is assumed to have basic knowledge in Yocto/Open-Embedded Linux
and container technology.
-Version history
-
-+--------------------+--------------------+--------------------+--------------------+
-| **Date** | **Ver.** | **Author** | **Comment** |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| 2019-11-02 | 1.0.0 | Jackie Huang | Initail version |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-| | | | |
-| | | | |
-+--------------------+--------------------+--------------------+--------------------+
-
Preface
-------
Hardware Requirements
---------------------
-Following minimum hardware requirements must be met for installation of O-RAN INF image:
+Following minimum hardware requirements must be met for installation of O-RAN INF image with AIO-DX:
+
++-------------------+----------------------------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++-------------------+----------------------------------------------------------------------------+
+| **# of servers** | 2 |
++-------------------+----------------------------------------------------------------------------+
+| **CPU** | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket |
+| | or |
+| | Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option) |
++-------------------+----------------------------------------------------------------------------+
+| **RAM** | 32G |
+| | |
++-------------------+----------------------------------------------------------------------------+
+| **Disk** | * Disk 1: 500G(It's better to be SSD) |
+| | * Disk 2: 1 or more 500 GB for Ceph OSD |
++-------------------+----------------------------------------------------------------------------+
+| **NICs** | * OAM: 1x1GE |
+| | * Data: 1 or more x 10GE (optional) |
++-------------------+----------------------------------------------------------------------------+
+| **BIOS settings** | * Hyper-Threading technology enabled |
+| | * Virtualization technology enabled |
+| | * VT for directed I/O enabled |
+| | * CPU power and performance policy set to performance |
+| | * CPU C state control disabled |
+| | * Plug & play BMC detection disabled |
++-------------------+----------------------------------------------------------------------------+
+
+ORAN INF E Release tested on HP ProLiant DL380p Gen8
+====================================================
+
+1. Installation for the first server from the O-RAN INF ISO image
+-----------------------------------------------------------------
+
+- Please see the README.md file for how to build the image.
+- The Image is a live ISO image with CLI installer:
+ inf-image-aio-installer-intel-corei7-64.iso
-+--------------------+----------------------------------------------------+
-| **HW Aspect** | **Requirement** |
-| | |
-+--------------------+----------------------------------------------------+
-| **# of servers** | 1 |
-+--------------------+----------------------------------------------------+
-| **CPU** | 2 |
-| | |
-+--------------------+----------------------------------------------------+
-| **RAM** | 4G |
-| | |
-+--------------------+----------------------------------------------------+
-| **Disk** | 20G |
-| | |
-+--------------------+----------------------------------------------------+
-| **NICs** | 1 |
-| | |
-+--------------------+----------------------------------------------------+
+1.1 Burn the image to the USB device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+- Assume the the usb device is /dev/sdX here
+::
-Software Installation and Deployment
-------------------------------------
+ $ sudo dd if=/path/to/inf-image-aio-installer-intel-corei7-64.iso of=/dev/sdX bs=1M
-1. Installation from the O-RAN INF ISO image
-````````````````````````````````````````````
+1.2 Install the first server (controller-0)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Please see the README.md file for how to build the image.
-- The Image is a live ISO image with CLI installer: oran-image-inf-host-intel-x86-64.iso
+- Reboot the target from the USB device.
-1.1 Burn the image to the USB device
-''''''''''''''''''''''''''''''''''''
+- Select “All-in-one Graphics console” or “All-in-one Serial console
+ install” and press ENTER
-- Assume the the usb device is /dev/sdX here
+- Start the auto installation
-::
+- It will reboot aotumatically after installation
- $ sudo dd if=/path/to/oran-image-inf-host-intel-x86-64.iso of=/dev/sdX bs=1M
+2. Configuration and initialize the bootstrap
+---------------------------------------------
-1.2 Insert the USB device in the target to be booted.
-'''''''''''''''''''''''''''''''''''''''''''''''''''''
+2.1 First Login with sysadmin/sysadmin and change password
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-1.3 Reboot the target from the USB device.
-''''''''''''''''''''''''''''''''''''''''''
+2.2 Set OAM network before bootstrap
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-1.4 Select "Graphics console install" or "Serial console install" and press ENTER
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+::
-1.5 Select the hard disk and press ENTER
-''''''''''''''''''''''''''''''''''''''''
+ export OAM_DEV=eno3
+ export CONTROLLER0_OAM_CIDR=128.224.210.110/24
+ export DEFAULT_OAM_GATEWAY=128.224.210.1
+ sudo ip address add $CONTROLLER0_OAM_CIDR dev $OAM_DEV
+ sudo ip link set up dev $OAM_DEV
+ sudo ip route add default via $DEFAULT_OAM_GATEWAY dev $OAM_DEV
-Notes: In this installer, you can only select which hard disk to install, the whole disk will be used and partitioned automatically.
+2.3 Login the server through SSH with sysadmin
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- e.g. insert "sda" and press ENTER
+2.4 Prepare the localhost.yml for bootstrap
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-1.6 Remove the USB device and press ENTER to reboot
-'''''''''''''''''''''''''''''''''''''''''''''''''''
+::
-2. Configuration for better real time performance
-`````````````````````````````````````````````````
+ cat << EOF > localhost.yml
+ system_mode: duplex
+ management_subnet: 192.168.18.0/24
+ management_start_address: 192.168.18.2
+ management_end_address: 192.168.18.50
+ management_gateway_address: 192.168.18.1
+ external_oam_subnet: 128.224.210.0/24
+ external_oam_gateway_address: 128.224.210.1
+ external_oam_floating_address: 128.224.210.110
+ external_oam_node_0_address: 128.224.210.111
+ external_oam_node_1_address: 128.224.210.112
+ EOF
+
+2.5 Run the ansible bootstrap
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Notes: Some of the tuning options are machine specific or depend on use cases,
-like the hugepages, isolcpus, rcu_nocbs, kthread_cpus, irqaffinity, nohz_full and
-so on, please do not just copy and past.
+::
-- Edit the grub.cfg with the following example tuning options
+ ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml -vvv
-::
+After the bootstrap successfully finish, it will show as following:
- # Notes: the grub.cfg file path is different for legacy and UEFI mode
- # For legacy mode: /boot/grub/grub.cfg
- # For UEFI mode: /boot/EFI/BOOT/grub.cfg
+::
- grub_cfg="/boot/grub/grub.cfg"
- #grub_cfg="/boot/EFI/BOOT/grub.cfg"
+ PLAY RECAP *************************************************************************************************************
+ localhost : ok=257 changed=151 unreachable=0 failed=0 skipped=214 rescued=0 ignored=0
- # In this example, 1-16 cores are isolated for real time processes
- root@intel-x86-64:~# rt_tuning="crashkernel=auto biosdevname=0 iommu=pt usbcore.autosuspend=-1 nmi_watchdog=0 softlockup_panic=0 intel_iommu=on cgroup_enable=memory skew_tick=1 hugepagesz=1G hugepages=4 default_hugepagesz=1G isolcpus=1-16 rcu_nocbs=1-16 kthread_cpus=0 irqaffinity=0 nohz=on nohz_full=1-16 intel_idle.max_cstate=0 processor.max_cstate=1 intel_pstate=disable nosoftlockup idle=poll mce=ignore_ce"
+2.6 Congiure controller-0
+~~~~~~~~~~~~~~~~~~~~~~~~~
- # optional to add the console setting
- root@intel-x86-64:~# console="console=ttyS0,115200"
+Acquire admin credentials:
- root@intel-x86-64:~# sed -i "/linux / s/$/ $console $rt_tuning/" $grub_cfg
+::
+ controller-0:~$ source /etc/platform/openrc
+ [sysadmin@controller-0 ~(keystone_admin)]$
-- Reboot the target
+Configure the OAM and MGMT interfaces of controller-0 and specify the
+attached networks:
::
- root@intel-x86-64:~# reboot
+ OAM_IF=eno3
+ MGMT_IF=eno1
+ system host-if-modify controller-0 lo -c none
+ IFNET_UUIDS=$(system interface-network-list controller-0 | awk '{if ($6=="lo") print $4;}')
+ for UUID in $IFNET_UUIDS; do
+ system interface-network-remove ${UUID}
+ done
-3. Kubernetes cluster and plugins deployment instructions (All-in-one)
-``````````````````````````````````````````````````````````````````````
-This instruction will show you how to deploy kubernetes cluster and plugins in an all-in-one example scenario after the above installation.
+ system host-if-modify controller-0 $OAM_IF -n oam0
+ system host-if-modify controller-0 $MGMT_IF -n pxeboot0
-3.1 Change the hostname (Optional)
-''''''''''''''''''''''''''''''''''
+ system host-if-modify controller-0 oam0 -c platform
+ system interface-network-assign controller-0 oam0 oam
-::
+ system host-if-modify controller-0 pxeboot0 -c platform
+ system interface-network-assign controller-0 pxeboot0 pxeboot
- # Assuming the hostname is oran-aio, ip address is <aio_host_ip>
- # please DO NOT copy and paste, use your actaul hostname and ip address
- root@intel-x86-64:~# echo oran-aio > /etc/hostname
- root@intel-x86-64:~# export AIO_HOST_IP="<aio_host_ip>"
- root@intel-x86-64:~# echo "$AIO_HOST_IP oran-aio" >> /etc/hosts
+ system host-if-add -V 18 controller-0 mgmt0 vlan pxeboot0
+ system interface-network-assign controller-0 mgmt0 mgmt
-3.2 Disable swap for Kubernetes
-'''''''''''''''''''''''''''''''
+ system host-if-add -V 19 controller-0 cluster0 vlan pxeboot0
+ system interface-network-assign controller-0 cluster0 cluster-host
+
+Example output:
::
- root@intel-x86-64:~# sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab
- root@intel-x86-64:~# systemctl mask dev-sda4.swap
+ [sysadmin@controller-0 ~(keystone_admin)]$ OAM_IF=eno3
+ [sysadmin@controller-0 ~(keystone_admin)]$ MGMT_IF=eno1
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-0 lo -c none
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | lo |
+ | iftype | virtual |
+ | ports | [] |
+ | imac | 00:00:00:00:00:00 |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | 08c95952-892b-40b5-b17a-7d2ad46e725c |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-17T00:30:45.265032+00:00 |
+ | updated_at | 2021-11-17T01:03:39.031612+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ IFNET_UUIDS=$(system interface-network-list controller-0 | awk '{if ($6=="lo") print $4;}')
+ [sysadmin@controller-0 ~(keystone_admin)]$ for UUID in $IFNET_UUIDS; do
+ > system interface-network-remove ${UUID}
+ > done
+ Deleted Interface Network: 0bf11f1b-4fc6-4e97-b896-3d6393a3744e
+ Deleted Interface Network: a62d95f6-ad4e-4779-bfc0-6a885067f8d8
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-0 $OAM_IF -n oam0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | oam0 |
+ | iftype | ethernet |
+ | ports | [u'eno3'] |
+ | imac | 24:6e:96:5d:0c:b2 |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | d8a048fa-67ef-43ac-8166-671be93caa30 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-17T00:28:32.365863+00:00 |
+ | updated_at | 2021-11-17T01:03:45.090904+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-0 $MGMT_IF -n pxeboot0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | pxeboot0 |
+ | iftype | ethernet |
+ | ports | [u'eno1'] |
+ | imac | 24:6e:96:5d:0c:92 |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | 23b5e923-1e53-4e70-a975-542d8380b7f2 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-17T00:28:32.612230+00:00 |
+ | updated_at | 2021-11-17T01:03:47.341003+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-0 oam0 -c platform
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | oam0 |
+ | iftype | ethernet |
+ | ports | [u'eno3'] |
+ | imac | 24:6e:96:5d:0c:b2 |
+ | imtu | 1500 |
+ | ifclass | platform |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | d8a048fa-67ef-43ac-8166-671be93caa30 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-17T00:28:32.365863+00:00 |
+ | updated_at | 2021-11-17T01:03:49.368879+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-0 oam0 oam
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-0 |
+ | uuid | 3c8bd181-d3f3-4e14-8e89-75a3432db1e4 |
+ | ifname | oam0 |
+ | network_name | oam |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-0 pxeboot0 -c platform
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | pxeboot0 |
+ | iftype | ethernet |
+ | ports | [u'eno1'] |
+ | imac | 24:6e:96:5d:0c:92 |
+ | imtu | 1500 |
+ | ifclass | platform |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | 23b5e923-1e53-4e70-a975-542d8380b7f2 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-17T00:28:32.612230+00:00 |
+ | updated_at | 2021-11-17T01:03:53.143795+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-0 pxeboot0 pxeboot
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-0 |
+ | uuid | 6c55622d-2da4-4f4e-ab5e-f8e06e03af7c |
+ | ifname | pxeboot0 |
+ | network_name | pxeboot |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-add -V 18 controller-0 mgmt0 vlan pxeboot0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | mgmt0 |
+ | iftype | vlan |
+ | ports | [] |
+ | imac | 24:6e:96:5d:0c:92 |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | 119bdb85-1e24-44ff-b527-fe8f167b0ad3 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | 18 |
+ | uses | [u'pxeboot0'] |
+ | used_by | [] |
+ | created_at | 2021-11-17T01:03:57.303000+00:00 |
+ | updated_at | None |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-0 mgmt0 mgmt
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-0 |
+ | uuid | 2e93ef03-e9ee-457a-8667-05b52b7109a5 |
+ | ifname | mgmt0 |
+ | network_name | mgmt |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-add -V 19 controller-0 cluster0 vlan pxeboot0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | cluster0 |
+ | iftype | vlan |
+ | ports | [] |
+ | imac | 24:6e:96:5d:0c:92 |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | 6a620c8e-4f7b-4f74-a9f4-2a91d3ae9756 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vlan_id | 19 |
+ | uses | [u'pxeboot0'] |
+ | used_by | [] |
+ | created_at | 2021-11-17T01:04:02.613518+00:00 |
+ | updated_at | None |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-0 cluster0 cluster-host
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-0 |
+ | uuid | fb8b6be6-1618-4662-b063-b1e8d340aa48 |
+ | ifname | cluster0 |
+ | network_name | cluster-host |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-list controller-0
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+ | uuid | name | class | type | vlan id | ports | uses i/f | used by i/f | attributes |
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+ | 119bdb85-1e24-44ff-b527-fe8f167b0ad3 | mgmt0 | platform | vlan | 18 | [] | [u'pxeboot0'] | [] | MTU=1500 |
+ | 23b5e923-1e53-4e70-a975-542d8380b7f2 | pxeboot0 | platform | ethernet | None | [u'eno1'] | [] | [u'mgmt0', u'cluster0'] | MTU=1500 |
+ | 6a620c8e-4f7b-4f74-a9f4-2a91d3ae9756 | cluster0 | platform | vlan | 19 | [] | [u'pxeboot0'] | [] | MTU=1500 |
+ | d8a048fa-67ef-43ac-8166-671be93caa30 | oam0 | platform | ethernet | None | [u'eno3'] | [] | [] | MTU=1500 |
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+
+Configure NTP Servers for network time synchronization:
+
+::
-3.3 Set the proxy for docker (Optional)
-'''''''''''''''''''''''''''''''''''''''
+ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
-- If you are under a firewall, you may need to set the proxy for docker to pull images
+Output
::
- root@intel-x86-64:~# HTTP_PROXY="http://<your_proxy_server_ip>:<port>"
- root@intel-x86-64:~# mkdir /etc/systemd/system/docker.service.d/
- root@intel-x86-64:~# cat << EOF > /etc/systemd/system/docker.service.d/http-proxy.conf
- [Service]
- Environment="HTTP_PROXY=$HTTP_PROXY" "NO_PROXY=localhost,127.0.0.1,localaddress,.localdomain.com,$AIO_HOST_IP,10.244.0.0/16"
- EOF
+ [sysadmin@controller-0 ~(keystone_admin)]$ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | uuid | 3206cf01-c64a-457e-ac66-b8224c9684c3 |
+ | ntpservers | 0.pool.ntp.org,1.pool.ntp.org |
+ | isystem_uuid | cc79b616-d24e-4432-a953-85c9b242cb3a |
+ | created_at | 2021-11-17T00:27:23.529571+00:00 |
+ | updated_at | None |
+ +--------------+--------------------------------------+
-3.4 Reboot the target
-'''''''''''''''''''''
+Add an OSD on controller-0 for Ceph:
::
- root@intel-x86-64:~# reboot
+ system host-disk-list controller-0
+ system host-disk-list controller-0 | awk '/\/dev\/sdb/{print $2}' | xargs -i system host-stor-add controller-0 {}
+ system host-disk-list controller-0 | awk '/\/dev\/sdc/{print $2}' | xargs -i system host-stor-add controller-0 {}
+ system host-stor-list controller-0
-3.5 Initialize kubernetes cluster master
-''''''''''''''''''''''''''''''''''''''''
+Output
::
- root@oran-aio:~# kubeadm init --kubernetes-version v1.15.2 --pod-network-cidr=10.244.0.0/16
- root@oran-aio:~# mkdir -p $HOME/.kube
- root@oran-aio:~# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
- root@oran-aio:~# chown $(id -u):$(id -g) $HOME/.kube/config
-
-3.6 Make the master also works as a worker node
-'''''''''''''''''''''''''''''''''''''''''''''''
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-0
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ | uuid | device_no | device_ | device_ | size_ | available_ | rpm | serial_id | device_path |
+ | | de | num | type | gib | gib | | | |
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ | 8e2a719a-fa5a-4c25-89af-70a23fb7b238 | /dev/sda | 2048 | HDD | 893. | 644.726 | Undetermined | 00c66a07604fa8de2500151b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:0:0 |
+ | | | | | 75 | | | | |
+ | | | | | | | | | |
+ | 61b6f262-a51f-4310-aeac-373b1c1bbbc2 | /dev/sdb | 2064 | HDD | 1117. | 1117.247 | Undetermined | 00c6b9139b76a8de2500151b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ | 81a7f4f9-dd3a-49b5-80d9-e1953aa43c79 | /dev/sdc | 2080 | HDD | 1117. | 1117.247 | Undetermined | 0053be63c794a8de2500151b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ | 4879b381-8e9f-48f3-84e2-f9c6a94bbfe0 | /dev/sdd | 2096 | HDD | 1117. | 0.0 | Undetermined | 0065482503bca8de2500151b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:3:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-0 | awk '/\/dev\/sdb/{print $2}' | xargs -i system host-stor-add controller-0 {}
+ +------------------+-------------------------------------------------------+
+ | Property | Value |
+ +------------------+-------------------------------------------------------+
+ | osdid | 0 |
+ | function | osd |
+ | state | configuring-on-unlock |
+ | journal_location | 0816c72f-a4f0-49ea-9a95-0f02c880717c |
+ | journal_size_gib | 1024 |
+ | journal_path | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0-part2 |
+ | journal_node | /dev/sdb2 |
+ | uuid | 0816c72f-a4f0-49ea-9a95-0f02c880717c |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | idisk_uuid | 61b6f262-a51f-4310-aeac-373b1c1bbbc2 |
+ | tier_uuid | 3af8c893-9dd4-40af-afc6-30bb79048448 |
+ | tier_name | storage |
+ | created_at | 2021-11-17T01:05:04.063823+00:00 |
+ | updated_at | None |
+ +------------------+-------------------------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-0 | awk '/\/dev\/sdc/{print $2}' | xargs -i system host-stor-add controller-0 {}
+ +------------------+-------------------------------------------------------+
+ | Property | Value |
+ +------------------+-------------------------------------------------------+
+ | osdid | 1 |
+ | function | osd |
+ | state | configuring-on-unlock |
+ | journal_location | 7a0b3727-0e3f-4582-9415-56e44bb8f1e5 |
+ | journal_size_gib | 1024 |
+ | journal_path | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0-part2 |
+ | journal_node | /dev/sdc2 |
+ | uuid | 7a0b3727-0e3f-4582-9415-56e44bb8f1e5 |
+ | ihost_uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | idisk_uuid | 81a7f4f9-dd3a-49b5-80d9-e1953aa43c79 |
+ | tier_uuid | 3af8c893-9dd4-40af-afc6-30bb79048448 |
+ | tier_name | storage |
+ | created_at | 2021-11-17T01:05:06.939798+00:00 |
+ | updated_at | None |
+ +------------------+-------------------------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-stor-list controller-0
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+ | uuid | function | osdid | state | idisk_uuid | journal_path | journal_node | journal_size_gib | tier_name |
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+ | 0816c72f-a4f0-49ea-9a95-0f02c880717c | osd | 0 | configuring-on-unlock | 61b6f262-a51f-4310-aeac-373b1c1bbbc2 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0-part2 | /dev/sdb2 | 1 | storage |
+ | 7a0b3727-0e3f-4582-9415-56e44bb8f1e5 | osd | 1 | configuring-on-unlock | 81a7f4f9-dd3a-49b5-80d9-e1953aa43c79 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0-part2 | /dev/sdc2 | 1 | storage |
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+
+2.7 Unlock controller-0
+~~~~~~~~~~~~~~~~~~~~~~~
::
- root@oran-aio:~# kubectl taint nodes oran-aio node-role.kubernetes.io/master-
+ system host-unlock controller-0
+
+Output:
+
+::
-3.7 Deploy flannel
-''''''''''''''''''
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-unlock controller-0
+ +-----------------------+-------------------------------------------------+
+ | Property | Value |
+ +-----------------------+-------------------------------------------------+
+ | action | none |
+ | administrative | locked |
+ | availability | online |
+ | bm_ip | None |
+ | bm_type | none |
+ | bm_username | None |
+ | boot_device | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:0:0 |
+ | capabilities | {u'stor_function': u'monitor'} |
+ | clock_synchronization | ntp |
+ | config_applied | 6aa15fb4-8cb3-494e-b94e-95f85b560f22 |
+ | config_status | None |
+ | config_target | c6ae9b2d-a3c4-4751-a79e-5487ba81ed82 |
+ | console | ttyS0,115200 |
+ | created_at | 2021-11-17T00:28:01.983673+00:00 |
+ | hostname | controller-0 |
+ | id | 1 |
+ | install_output | graphical |
+ | install_state | None |
+ | install_state_info | None |
+ | inv_state | inventoried |
+ | invprovision | provisioning |
+ | location | {} |
+ | mgmt_ip | 192.168.18.3 |
+ | mgmt_mac | 24:6e:96:5d:0c:92 |
+ | operational | disabled |
+ | personality | controller |
+ | reserved | False |
+ | rootfs_device | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:0:0 |
+ | serialid | None |
+ | software_load | 21.05 |
+ | subfunction_avail | online |
+ | subfunction_oper | disabled |
+ | subfunctions | controller,worker,lowlatency |
+ | task | Unlocking |
+ | tboot | false |
+ | ttys_dcd | None |
+ | updated_at | 2021-11-17T01:05:07.015414+00:00 |
+ | uptime | 3496 |
+ | uuid | 16afe3a2-ba50-46b8-9fd7-09010059e8b9 |
+ | vim_progress_status | None |
+ +-----------------------+-------------------------------------------------+
+
+Controller-0 will reboot to apply configuration changes and come into
+service. This can take 5-10 minutes, depending on the performance of the
+host machine.
+
+Once the controller comes back up, check the status of controller-0
::
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/flannel/kube-flannel.yml
+ controller-0:~$ source /etc/platform/openrc
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-list
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | id | hostname | personality | administrative | operational | availability |
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | 1 | controller-0 | controller | unlocked | enabled | available |
+ +----+--------------+-------------+----------------+-------------+--------------+
-Check that the aio node is ready after flannel is successfully deployed and running
+2. Installation for the second server (controller-1)
+----------------------------------------------------
+
+2.1 Power on the controller-1 server and force it to network boot
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+2.2 As controller-1 boots, a message appears on its console instructing you to configure the personality of the node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+2.3 On the console of controller-0, list hosts to see newly discovered controller-1 host (hostname=None)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
::
- root@oran-aio:~# kubectl get pods --all-namespaces |grep flannel
- kube-system kube-flannel-ds-amd64-bwt52 1/1 Running 0 3m24s
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-list
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | id | hostname | personality | administrative | operational | availability |
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | 1 | controller-0 | controller | unlocked | enabled | degraded |
+ | 2 | None | None | locked | disabled | offline |
+ +----+--------------+-------------+----------------+-------------+--------------+
- root@oran-aio:~# kubectl get nodes
- NAME STATUS ROLES AGE VERSION
- oran-aio Ready master 3m17s v1.15.2-dirty
+2.4 Using the host id, set the personality of this host to 'controller’:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-3.8 Deploy kubernetes dashboard
-'''''''''''''''''''''''''''''''
+::
-Deploy kubernetes dashboard
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-update 2 personality=controller
+ +-----------------------+--------------------------------------+
+ | Property | Value |
+ +-----------------------+--------------------------------------+
+ | action | none |
+ | administrative | locked |
+ | availability | offline |
+ | bm_ip | None |
+ | bm_type | None |
+ | bm_username | None |
+ | boot_device | /dev/sda |
+ | capabilities | {} |
+ | clock_synchronization | ntp |
+ | config_applied | None |
+ | config_status | None |
+ | config_target | None |
+ | console | ttyS0,115200 |
+ | created_at | 2021-11-17T10:17:44.387813+00:00 |
+ | hostname | controller-1 |
+ | id | 2 |
+ | install_output | text |
+ | install_state | None |
+ | install_state_info | None |
+ | inv_state | None |
+ | invprovision | None |
+ | location | {} |
+ | mgmt_ip | 192.168.18.4 |
+ | mgmt_mac | 24:6e:96:5d:38:ee |
+ | operational | disabled |
+ | personality | controller |
+ | reserved | False |
+ | rootfs_device | /dev/sda |
+ | serialid | None |
+ | software_load | 21.05 |
+ | subfunction_avail | not-installed |
+ | subfunction_oper | disabled |
+ | subfunctions | controller,worker,lowlatency |
+ | task | None |
+ | tboot | false |
+ | ttys_dcd | None |
+ | updated_at | None |
+ | uptime | 0 |
+ | uuid | f069381d-9743-49cc-bf8b-eb4bd3972203 |
+ | vim_progress_status | None |
+ +-----------------------+--------------------------------------+
+
+2.5 Wait for the software installation on controller-1 to complete, for controller-1 to reboot, and for controller-1 to show as locked/disabled/online in 'system host-list'.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This can take 5-10 minutes, depending on the performance of the host
+machine.
::
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/kubernetes-dashboard/kubernetes-dashboard-admin.rbac.yaml
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/kubernetes-dashboard/kubernetes-dashboard.yaml
+ [root@controller-0 hieradata(keystone_admin)]$ system host-list
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | id | hostname | personality | administrative | operational | availability |
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | 1 | controller-0 | controller | unlocked | enabled | available |
+ | 2 | controller-1 | controller | locked | disabled | online |
+ +----+--------------+-------------+----------------+-------------+--------------+
-Verify that the dashboard is up and running
+2.6 Configure controller-1
+~~~~~~~~~~~~~~~~~~~~~~~~~~
::
- # Check the pod for dashboard
- root@oran-aio:~# kubectl get pods --all-namespaces |grep dashboard
- kube-system kubernetes-dashboard-5b67bf4d5f-ghg4f 1/1 Running 0 64s
+ OAM_IF=eno3
+ MGMT_IF=eno1
+ system host-if-modify controller-1 $OAM_IF -n oam0
+ system host-if-modify controller-1 oam0 -c platform
+ system interface-network-assign controller-1 oam0 oam
-Access the dashboard UI in a web browser with the url: https://<aio_host_ip>:30443
+ system host-if-add -V 19 controller-1 cluster0 vlan pxeboot0
+ system interface-network-assign controller-1 cluster0 cluster-host
-- For detail usage, please refer to `Doc for dashboard`_
+ system host-if-list controller-1
-.. _`Doc for dashboard`: https://kubernetes.io/docs/tasks/access-application-cluster/web-ui-dashboard/
+ system host-disk-list controller-1
+ system host-disk-list controller-1 | awk '/\/dev\/sdb/{print $2}' | xargs -i system host-stor-add controller-1 {}
+ system host-disk-list controller-1 | awk '/\/dev\/sdc/{print $2}' | xargs -i system host-stor-add controller-1 {}
+ system host-stor-list controller-1
-3.9 Deploy Multus-CNI
-'''''''''''''''''''''
+Output:
::
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/multus-cni/multus-daemonset.yml
+ [sysadmin@controller-0 ~(keystone_admin)]$ OAM_IF=eno3
+ [sysadmin@controller-0 ~(keystone_admin)]$ MGMT_IF=eno1
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-1 $OAM_IF -n oam0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | oam0 |
+ | iftype | ethernet |
+ | ports | [u'eno3'] |
+ | imac | 24:6e:96:5d:39:0e |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | c2473511-d0d6-445d-9739-4d43dc029de9 |
+ | ihost_uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-22T14:01:32.365863+00:00 |
+ | updated_at | 2021-11-22T15:04:45.090904+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-modify controller-1 oam0 -c platform
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | oam0 |
+ | iftype | ethernet |
+ | ports | [u'eno3'] |
+ | imac | 24:6e:96:5d:39:0e |
+ | imtu | 1500 |
+ | ifclass | platform |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | c2473511-d0d6-445d-9739-4d43dc029de9 |
+ | ihost_uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | vlan_id | None |
+ | uses | [] |
+ | used_by | [] |
+ | created_at | 2021-11-22T14:05:16.052229+00:00 |
+ | updated_at | 2021-11-22T15:08:35.324634+00:00 |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-1 oam0 oam
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-1 |
+ | uuid | f2e7f088-0dd0-4adc-8348-4e3cef23bc47 |
+ | ifname | oam0 |
+ | network_name | oam |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-add -V 19 controller-1 cluster0 vlan pxeboot0
+ +-----------------+--------------------------------------+
+ | Property | Value |
+ +-----------------+--------------------------------------+
+ | ifname | cluster0 |
+ | iftype | vlan |
+ | ports | [] |
+ | imac | 24:6e:96:5d:38:ee |
+ | imtu | 1500 |
+ | ifclass | None |
+ | aemode | None |
+ | schedpolicy | None |
+ | txhashpolicy | None |
+ | uuid | b6783682-b2aa-4135-90d2-676e1db41ae8 |
+ | ihost_uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | vlan_id | 19 |
+ | uses | [u'pxeboot0'] |
+ | used_by | [] |
+ | created_at | 2021-11-22T15:08:43.932209+00:00 |
+ | updated_at | None |
+ | sriov_numvfs | 0 |
+ | sriov_vf_driver | None |
+ | accelerated | [True] |
+ +-----------------+--------------------------------------+
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-network-assign controller-1 cluster0 cluster-host
+ +--------------+--------------------------------------+
+ | Property | Value |
+ +--------------+--------------------------------------+
+ | hostname | controller-1 |
+ | uuid | 8fc64805-b54b-45a4-b88a-e13b236abfe8 |
+ | ifname | cluster0 |
+ | network_name | cluster-host |
+ +--------------+--------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-if-list controller-1
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+ | uuid | name | class | type | vlan id | ports | uses i/f | used by i/f | attributes |
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+ | b6783682-b2aa-4135-90d2-676e1db41ae8 | cluster0 | platform | vlan | 19 | [] | [u'pxeboot0'] | [] | MTU=1500 |
+ | b8921960-fde5-44c3-960d-2aebf42ea400 | pxeboot0 | platform | ethernet | None | [u'eno1'] | [] | [u'mgmt0', u'cluster0'] | MTU=1500 |
+ | c103275b-2b75-4568-865f-ac6be32ecb2d | mgmt0 | platform | vlan | 18 | [] | [u'pxeboot0'] | [] | MTU=1500 |
+ | c2473511-d0d6-445d-9739-4d43dc029de9 | oam0 | platform | ethernet | None | [u'eno3'] | [] | [] | MTU=1500 |
+ +--------------------------------------+----------+----------+----------+---------+-----------+---------------+-------------------------+------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-1
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ | uuid | device_no | device_ | device_ | size_ | available_ | rpm | serial_id | device_path |
+ | | de | num | type | gib | gib | | | |
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ | 5b8fade4-b048-48fa-b906-9dcbdbed8e96 | /dev/sda | 2048 | HDD | 893. | 644.726 | Undetermined | 00cbd97f3e36ccfa2500561b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:0:0 |
+ | | | | | 75 | | | | |
+ | | | | | | | | | |
+ | 1a3f0a36-5961-42e5-a271-e71db1c25d42 | /dev/sdb | 2064 | HDD | 1117. | 1117.247 | Undetermined | 006d0e977b5fccfa2500561b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ | eddd732f-2cea-49b3-86db-b722c0b1a1ae | /dev/sdc | 2080 | HDD | 1117. | 1117.247 | Undetermined | 003a2377ac7fccfa2500561b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ | 774c3cd0-1178-4145-9573-f0d6dee2ba06 | /dev/sdd | 2096 | HDD | 1117. | 1117.247 | Undetermined | 00d7093ef0adccfa2500561b14604609 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:3:0 |
+ | | | | | 25 | | | | |
+ | | | | | | | | | |
+ | 00361302-8d55-4730-855c-b0098c73ab7e | /dev/sde | 2112 | SSD | 223. | 223.568 | N/A | PHDW730104QM240E | /dev/disk/by-path/pci-0000:d8:00.0-ata-1 |
+ | | | | | 57 | | | | |
+ | | | | | | | | | |
+ | 7ce735e6-920f-4424-a890-a7a7f48d7632 | /dev/sdf | 2128 | SSD | 223. | 223.568 | N/A | PHDW730104LL240E | /dev/disk/by-path/pci-0000:d8:00.0-ata-2 |
+ | | | | | 57 | | | | |
+ | | | | | | | | | |
+ +--------------------------------------+-----------+---------+---------+-------+------------+--------------+----------------------------------+-------------------------------------------------+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-1 | awk '/\/dev\/sdb/{print $2}' | xargs -i system host-stor-add controller-1 {}
+ +------------------+-------------------------------------------------------+
+ | Property | Value |
+ +------------------+-------------------------------------------------------+
+ | osdid | 2 |
+ | function | osd |
+ | state | configuring-on-unlock |
+ | journal_location | 54a218d8-0466-4366-9ef0-3ec5a952fde7 |
+ | journal_size_gib | 1024 |
+ | journal_path | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0-part2 |
+ | journal_node | /dev/sdb2 |
+ | uuid | 54a218d8-0466-4366-9ef0-3ec5a952fde7 |
+ | ihost_uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | idisk_uuid | 1a3f0a36-5961-42e5-a271-e71db1c25d42 |
+ | tier_uuid | 06b4740e-29db-4896-9600-03ee40fe0d6c |
+ | tier_name | storage |
+ | created_at | 2021-11-22T15:11:55.641193+00:00 |
+ | updated_at | None |
+ +------------------+-------------------------------------------------------+
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-disk-list controller-1 | awk '/\/dev\/sdc/{print $2}' | xargs -i system host-stor-add controller-1 {}
+ +------------------+-------------------------------------------------------+
+ | Property | Value |
+ +------------------+-------------------------------------------------------+
+ | osdid | 3 |
+ | function | osd |
+ | state | configuring-on-unlock |
+ | journal_location | 5be88c7a-3a94-4b97-9da5-b247bb89406c |
+ | journal_size_gib | 1024 |
+ | journal_path | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0-part2 |
+ | journal_node | /dev/sdc2 |
+ | uuid | 5be88c7a-3a94-4b97-9da5-b247bb89406c |
+ | ihost_uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | idisk_uuid | eddd732f-2cea-49b3-86db-b722c0b1a1ae |
+ | tier_uuid | 06b4740e-29db-4896-9600-03ee40fe0d6c |
+ | tier_name | storage |
+ | created_at | 2021-11-22T15:12:04.274839+00:00 |
+ | updated_at | None |
+ +------------------+-------------------------------------------------------+
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-stor-list controller-1
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+ | uuid | function | osdid | state | idisk_uuid | journal_path | journal_node | journal_size_gib | tier_name |
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+ | 54a218d8-0466-4366-9ef0-3ec5a952fde7 | osd | 2 | configuring-on-unlock | 1a3f0a36-5961-42e5-a271-e71db1c25d42 | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:1:0-part2 | /dev/sdb2 | 1 | storage |
+ | 5be88c7a-3a94-4b97-9da5-b247bb89406c | osd | 3 | configuring-on-unlock | eddd732f-2cea-49b3-86db-b722c0b1a1ae | /dev/disk/by-path/pci-0000:86:00.0-scsi-0:2:2:0-part2 | /dev/sdc2 | 1 | storage |
+ +--------------------------------------+----------+-------+-----------------------+--------------------------------------+-------------------------------------------------------+--------------+------------------+-----------+
+
+2.7 Unlock controller-1
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Unlock controller-1 in order to bring it into service:
+
+::
-Verify that the multus-cni is up and running
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-unlock controller-1
+ +-----------------------+--------------------------------------+
+ | Property | Value |
+ +-----------------------+--------------------------------------+
+ | action | none |
+ | administrative | locked |
+ | availability | online |
+ | bm_ip | None |
+ | bm_type | None |
+ | bm_username | None |
+ | boot_device | /dev/sda |
+ | capabilities | {u'stor_function': u'monitor'} |
+ | clock_synchronization | ntp |
+ | config_applied | None |
+ | config_status | Config out-of-date |
+ | config_target | 9747e0ce-2319-409d-b75c-2475bc5065ac |
+ | console | ttyS0,115200 |
+ | created_at | 2021-11-22T12:58:11.630526+00:00 |
+ | hostname | controller-1 |
+ | id | 3 |
+ | install_output | text |
+ | install_state | None |
+ | install_state_info | None |
+ | inv_state | inventoried |
+ | invprovision | unprovisioned |
+ | location | {} |
+ | mgmt_ip | 192.168.18.4 |
+ | mgmt_mac | 24:6e:96:5d:38:ee |
+ | operational | disabled |
+ | personality | controller |
+ | reserved | False |
+ | rootfs_device | /dev/sda |
+ | serialid | None |
+ | software_load | 21.05 |
+ | subfunction_avail | online |
+ | subfunction_oper | disabled |
+ | subfunctions | controller,worker,lowlatency |
+ | task | Unlocking |
+ | tboot | false |
+ | ttys_dcd | None |
+ | updated_at | 2021-11-22T15:13:09.716324+00:00 |
+ | uptime | 752 |
+ | uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | vim_progress_status | None |
+ +-----------------------+--------------------------------------+
+
+Controller-1 will reboot in order to apply configuration changes and
+come into service. This can take 5-10 minutes, depending on the
+performance of the host machine.
::
- root@oran-aio:~# kubectl get pods --all-namespaces | grep -i multus
- kube-system kube-multus-ds-amd64-hjpk4 1/1 Running 0 7m34s
+ [root@controller-0 hieradata(keystone_admin)]$ system host-list
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | id | hostname | personality | administrative | operational | availability |
+ +----+--------------+-------------+----------------+-------------+--------------+
+ | 1 | controller-0 | controller | unlocked | enabled | available |
+ | 2 | controller-1 | controller | unlocked | enabled | available |
+ +----+--------------+-------------+----------------+-------------+--------------+
+
+ [sysadmin@controller-0 ~(keystone_admin)]$ system host-show controller-1
+ +-----------------------+-----------------------------------------------------------------------+
+ | Property | Value |
+ +-----------------------+-----------------------------------------------------------------------+
+ | action | none |
+ | administrative | unlocked |
+ | availability | available |
+ | bm_ip | None |
+ | bm_type | None |
+ | bm_username | None |
+ | boot_device | /dev/sda |
+ | capabilities | {u'stor_function': u'monitor', u'Personality': u'Controller-Standby'} |
+ | clock_synchronization | ntp |
+ | config_applied | 9747e0ce-2319-409d-b75c-2475bc5065ac |
+ | config_status | None |
+ | config_target | 9747e0ce-2319-409d-b75c-2475bc5065ac |
+ | console | ttyS0,115200 |
+ | created_at | 2021-11-22T12:58:11.630526+00:00 |
+ | hostname | controller-1 |
+ | id | 2 |
+ | install_output | text |
+ | install_state | None |
+ | install_state_info | None |
+ | inv_state | inventoried |
+ | invprovision | provisioned |
+ | location | {} |
+ | mgmt_ip | 192.168.18.4 |
+ | mgmt_mac | 24:6e:96:5d:38:ee |
+ | operational | enabled |
+ | personality | controller |
+ | reserved | False |
+ | rootfs_device | /dev/sda |
+ | serialid | None |
+ | software_load | 21.05 |
+ | subfunction_avail | available |
+ | subfunction_oper | enabled |
+ | subfunctions | controller,worker,lowlatency |
+ | task | |
+ | tboot | false |
+ | ttys_dcd | None |
+ | updated_at | 2021-11-22T23:59:07.787759+00:00 |
+ | uptime | 31008 |
+ | uuid | 63c930c7-2195-4d5a-870c-be610fd6b4fc |
+ | vim_progress_status | services-enabled |
+ +-----------------------+-----------------------------------------------------------------------+
+
+
+3. Simple use case for sriov
+````````````````````````````
+
+3.1 After controller-0 is rebooted and up running, download the DPDK
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-- For further validating, please refer to the `Multus-CNI quick start`_
+::
-.. _`Multus-CNI quick start`: https://github.com/intel/multus-cni/blob/master/doc/quickstart.md
+ [sysadmin@controller-0 ~(keystone_admin)]$ cd /opt
+ [sysadmin@controller-0 opt(keystone_admin)]$ sudo wget https://fast.dpdk.org/rel/dpdk-17.11.10.tar.xz
+ Password:
+ --2021-06-04 02:35:30-- https://fast.dpdk.org/rel/dpdk-17.11.10.tar.xz
+ Resolving fast.dpdk.org... 151.101.2.49, 151.101.66.49, 151.101.130.49, ...
+ Connecting to fast.dpdk.org|151.101.2.49|:443... connected.
+
+ HTTP request sent, awaiting response... 200 OK
+ Length: 10251680 (9.8M) [application/octet-stream]
+ Saving to: ‘dpdk-17.11.10.tar.xz’
+
+ dpdk-17.11.10.tar.xz 100%
+ [========================================================================================>] 9.78M
+ 1.48MB/s in 6.8s
-3.10 Deploy NFD (node-feature-discovery)
-''''''''''''''''''''''''''''''''''''''''
+ 2021-06-04 02:35:40 (1.43 MB/s) - ‘dpdk-17.11.10.tar.xz’ saved [10251680/10251680]
-::
+ sudo tar xvf dpdk-17.11.10.tar.xz
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/node-feature-discovery/nfd-master.yaml
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/node-feature-discovery/nfd-worker-daemonset.yaml
+ sudo ln -s dpdk-stable-17.11.10 dpdk-stable
-Verify that nfd-master and nfd-worker are up and running
+3.2 Prepare the yaml file for the network assignment container
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-::
+The following the exmaple of the yaml file:
- root@oran-aio:~# kubectl get pods --all-namespaces |grep nfd
- default nfd-master-7v75k 1/1 Running 0 91s
- default nfd-worker-xn797 1/1 Running 0 24s
+::
-Verify that the node is labeled by nfd:
+ [sysadmin@controller-0 sriov(keystone_admin)]$ cat <<EOF > netdef-data-dpdk.yaml
+ > apiVersion: "k8s.cni.cncf.io/v1"
+ > kind: NetworkAttachmentDefinition
+ > metadata:
+ > name: sriov-data-dpdk-0
+ > annotations:
+ > k8s.v1.cni.cncf.io/resourceName: intel.com/pci_sriov_net_physnet0
+ > spec:
+ > config: '{
+ > "type": "sriov",
+ > "name": "sriov-data-dpdk-0"
+ > }'
+ >
+ > ---
+ > apiVersion: "k8s.cni.cncf.io/v1"
+ > kind: NetworkAttachmentDefinition
+ > metadata:
+ > name: sriov-data-dpdk-1
+ > annotations:
+ > k8s.v1.cni.cncf.io/resourceName: intel.com/pci_sriov_net_physnet1
+ > spec:
+ > config: '{
+ > "type": "sriov",
+ > "name": "sriov-data-dpdk-1"
+ > }'
+ > EOF
+
+3.3 Run the network assignent container for the 2 VFs
+'''''''''''''''''''''''''''''''''''''''''''''''''''''
::
- root@oran-aio:~# kubectl describe nodes|grep feature.node.kubernetes
- feature.node.kubernetes.io/cpu-cpuid.AESNI=true
- feature.node.kubernetes.io/cpu-cpuid.AVX=true
- feature.node.kubernetes.io/cpu-cpuid.AVX2=true
- (...snip...)
+ [sysadmin@controller-0 sriov(keystone_admin)]$ kubectl create -f netdef-data-dpdk.yaml
+ networkattachmentdefinition.k8s.cni.cncf.io/sriov-data-dpdk-0 created
+ networkattachmentdefinition.k8s.cni.cncf.io/sriov-data-dpdk-1 created
+
+3.4 Prepare the VF container yaml file
+''''''''''''''''''''''''''''''''''''''
-3.11 Deploy CMK (CPU-Manager-for-Kubernetes)
-''''''''''''''''''''''''''''''''''''''''''''
+::
-Build the CMK docker image
+ [sysadmin@controller-0 sriov(keystone_admin)]$ cat <<EOF > pod-with-dpdk-vfs-0.yaml
+ > apiVersion: v1
+ > kind: Pod
+ metadata:
+ > metadata:
+ > name: pod-with-dpdk-vfs-0
+ > annotations:
+ > k8s.v1.cni.cncf.io/networks: '[
+ > { "name": "sriov-data-dpdk-0" },
+ { "name": "sriov-data-dpdk-1" }
+ > { "name": "sriov-data-dpdk-1" }
+ > ]'
+ > spec:
+ > restartPolicy: Never
+ > containers:
+ > - name: pod-with-dpdk-vfs-0
+ > image: wrsnfv/ubuntu-dpdk-build:v0.3
+ > env:
+ > - name: RTE_SDK
+ > value: "/usr/src/dpdk"
+ > command:
+ > - sleep
+ > - infinity
+ > stdin: true
+ > tty: true
+ > securityContext:
+ > privileged: true
+ > capabilities:
+ > add:
+ > - ALL
+ > resources:
+ > requests:
+ > cpu: 4
+ > memory: 4Gi
+ > intel.com/pci_sriov_net_physnet0: '1'
+ > intel.com/pci_sriov_net_physnet1: '1'
+ > limits:
+ > cpu: 4
+ > hugepages-1Gi: 2Gi
+ > memory: 4Gi
+ > intel.com/pci_sriov_net_physnet0: '1'
+ > intel.com/pci_sriov_net_physnet1: '1'
+ > volumeMounts:
+ > - mountPath: /mnt/huge-1048576kB
+ > name: hugepage
+ > - name: dpdk-volume
+ > mountPath: /usr/src/dpdk
+ > - name: lib-volume
+ > mountPath: /lib/modules
+ > - name: src-volume
+ > mountPath: /usr/src/
+ > volumes:
+ > - name: hugepage
+ > emptyDir:
+ > medium: HugePages
+ > - name: dpdk-volume
+ > hostPath:
+ > path: /opt/dpdk-stable/
+ > - name: lib-volume
+ > hostPath:
+ > path: /lib/modules
+ > - name: src-volume
+ > hostPath:
+ > path: /usr/src/
+ > EOF
+
+3.5 Run the VF container
+''''''''''''''''''''''''
+
+Start the VF container.
::
- root@oran-aio:~# cd /opt/kubernetes_plugins/cpu-manager-for-kubernetes/
- root@oran-aio:/opt/kubernetes_plugins/cpu-manager-for-kubernetes# make
+ [sysadmin@controller-0 sriov(keystone_admin)]$ kubectl create -f pod-with-dpdk-vfs-0.yaml
+ pod/pod-with-dpdk-vfs-0 created
-Verify that the cmk docker images is built successfully
+ [sysadmin@controller-0 sriov(keystone_admin)]$ kubectl get pod
+ NAME READY STATUS RESTARTS AGE
+ pod-with-dpdk-vfs-0 1/1 Running 0 6m40s
+
+Login the VF container
::
- root@oran-aio:/opt/kubernetes_plugins/cpu-manager-for-kubernetes# docker images|grep cmk
- cmk v1.3.1 3fec5f753b05 44 minutes ago 765MB
+ kubectl exec -it pod-with-dpdk-vfs-0 -- bash
-Edit the template yaml file for your deployment:
- - The template file is: /etc/kubernetes/plugins/cpu-manager-for-kubernetes/cmk-cluster-init-pod-template.yaml
- - The options you may need to change:
+Build the DPDK
::
- # You can change the value for the following env:
- env:
- - name: HOST_LIST
- # Change this to modify the the host list to be initialized
- value: "oran-aio"
- - name: NUM_EXCLUSIVE_CORES
- # Change this to modify the value passed to `--num-exclusive-cores` flag
- value: "4"
- - name: NUM_SHARED_CORES
- # Change this to modify the value passed to `--num-shared-cores` flag
- value: "1"
- - name: CMK_IMG
- # Change his ONLY if you built the docker images with a different tag name
- value: "cmk:v1.3.1"
+ cd /lib/modules/5.0.19-rt11-yocto-preempt-rt/build
+
+ root@pod-with-dpdk-vfs-0:/lib/modules/5.0.19-rt11-yocto-preempt-rt/build# make prepare
+ HOSTCC scripts/basic/fixdep
+ HOSTCC scripts/kconfig/conf.o
+ HOSTCC scripts/kconfig/confdata.o
+ HOSTCC scripts/kconfig/expr.o
+ HOSTCC scripts/kconfig/symbol.o
+ HOSTCC scripts/kconfig/preprocess.o
+ HOSTCC scripts/kconfig/zconf.lex.o
+ HOSTCC scripts/kconfig/zconf.tab.o
+ HOSTLD scripts/kconfig/conf
+ scripts/kconfig/conf --syncconfig Kconfig
+ HOSTCC arch/x86/tools/relocs_32.o
+ HOSTCC arch/x86/tools/relocs_64.o
+ HOSTCC arch/x86/tools/relocs_common.o
+ HOSTLD arch/x86/tools/relocs
+ HOSTCC scripts/genksyms/genksyms.o
+ YACC scripts/genksyms/parse.tab.c
+ HOSTCC scripts/genksyms/parse.tab.o
+ LEX scripts/genksyms/lex.lex.c
+ YACC scripts/genksyms/parse.tab.h
+ HOSTCC scripts/genksyms/lex.lex.o
+ HOSTLD scripts/genksyms/genksyms
+ HOSTCC scripts/bin2c
+ HOSTCC scripts/kallsyms
+ HOSTCC scripts/conmakehash
+ HOSTCC scripts/recordmcount
+ HOSTCC scripts/sortextable
+ HOSTCC scripts/asn1_compiler
+ HOSTCC scripts/sign-file
+ HOSTCC scripts/extract-cert
+ CC scripts/mod/empty.o
+ HOSTCC scripts/mod/mk_elfconfig
+ MKELF scripts/mod/elfconfig.h
+ HOSTCC scripts/mod/modpost.o
+ CC scripts/mod/devicetable-offsets.s
+ UPD scripts/mod/devicetable-offsets.h
+ HOSTCC scripts/mod/file2alias.o
+ HOSTCC scripts/mod/sumversion.o
+ HOSTLD scripts/mod/modpost
+ CC kernel/bounds.s
+ CC arch/x86/kernel/asm-offsets.s
+ CALL scripts/checksyscalls.sh
+
+Build the test_pmd application
+
+::
-Or you can also refer to `CMK operator manual`_
+ cd $RTE_SDK
+ ./usertools/dpdk-setup.sh
+ Option: 14
+ CC config.o
+ CC iofwd.o
+ CC macfwd.o
+ CC macswap.o
+ CC flowgen.o
+ CC rxonly.o
+ CC txonly.o
+ CC csumonly.o
+ CC icmpecho.o
+ CC tm.o
+ LD testpmd
+ INSTALL-APP testpmd
+ INSTALL-MAP testpmd.map
+ == Build app/proc_info
+ CC main.o
+ LD dpdk-procinfo
+ INSTALL-APP dpdk-procinfo
+ INSTALL-MAP dpdk-procinfo.map
+ == Build app/pdump
+ CC main.o
+ LD dpdk-pdump
+ INSTALL-APP dpdk-pdump
+ INSTALL-MAP dpdk-pdump.map
+ == Build app/test-crypto-perf
+ CC main.o
+ CC cperf_ops.o
+ CC cperf_options_parsing.o
+ CC cperf_test_vectors.o
+ CC cperf_test_throughput.o
+ CC cperf_test_latency.o
+ CC cperf_test_pmd_cyclecount.o
+ CC cperf_test_verify.o
+ CC cperf_test_vector_parsing.o
+ CC cperf_test_common.o
+ LD dpdk-test-crypto-perf
+ INSTALL-APP dpdk-test-crypto-perf
+ INSTALL-MAP dpdk-test-crypto-perf.map
+ == Build app/test-eventdev
+ CC evt_main.o
+ CC evt_options.o
+ CC evt_test.o
+ CC parser.o
+ CC test_order_common.o
+ CC test_order_queue.o
+ CC test_order_atq.o
+ CC test_perf_common.o
+ CC test_perf_queue.o
+ CC test_perf_atq.o
+ LD dpdk-test-eventdev
+ INSTALL-APP dpdk-test-eventdev
+ INSTALL-MAP dpdk-test-eventdev.map
+ Build complete [x86_64-native-linuxapp-gcc]
+ Installation cannot run with T defined and DESTDIR undefined
+ ------------------------------------------------------------------------------
+ RTE_TARGET exported as x86_64-native-linuxapp-gcc
+ ------------------------------------------------------------------------------
+
+ Press enter to continue ...
+
+Check the VF PCI information:
-.. _`CMK operator manual`: https://github.com/intel/CPU-Manager-for-Kubernetes/blob/master/docs/operator.md
+::
+ root@pod-with-dpdk-vfs-0:/usr/src/dpdk# printenv | grep PCIDEVICE_INTEL_COM
+ PCIDEVICE_INTEL_COM_PCI_SRIOV_NET_PHYSNET1=0000:05:11.1
+ PCIDEVICE_INTEL_COM_PCI_SRIOV_NET_PHYSNET0=0000:05:11.0
-Depoly CMK from yaml files
+Exit from pod back to host to find which VFs are assigned to this pod by check the pci address:
::
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/cpu-manager-for-kubernetes/cmk-rbac-rules.yaml
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/cpu-manager-for-kubernetes/cmk-serviceaccount.yaml
- root@oran-aio:~# kubectl apply -f /etc/kubernetes/plugins/cpu-manager-for-kubernetes/cmk-cluster-init-pod-template.yaml
+ [root@controller-0 sysadmin(keystone_admin)]# ls -l /sys/class/net/ens2f0/device/virtfn*
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn0 -> ../0000:05:10.0
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn1 -> ../0000:05:10.2
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn2 -> ../0000:05:10.4
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn3 -> ../0000:05:10.6
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn4 -> ../0000:05:11.0
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f0/device/virtfn5 -> ../0000:05:11.2
-Verify that the cmk cluster init completed and the pods for nodereport and webhook deployment are up and running
+ [root@controller-0 sysadmin(keystone_admin)]# ls -l /sys/class/net/ens2f1/device/virtfn*
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn0 -> ../0000:05:10.1
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn1 -> ../0000:05:10.3
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn2 -> ../0000:05:10.5
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn3 -> ../0000:05:10.7
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn4 -> ../0000:05:11.1
+ lrwxrwxrwx 1 root root 0 Jun 4 02:12 /sys/class/net/ens2f1/device/virtfn5 -> ../0000:05:11.3
-::
+ [root@controller-0 sysadmin(keystone_admin)]# sudo ip link set ens2f0 vf 4 mac 9e:fd:e6:dd:c1:01
+ [root@controller-0 sysadmin(keystone_admin)]# sudo ip link set ens2f1 vf 4 mac 9e:fd:e6:dd:c1:02
- root@oran-aio:/opt/kubernetes_plugins/cpu-manager-for-kubernetes# kubectl get pods --all-namespaces |grep cmk
- default cmk-cluster-init-pod 0/1 Completed 0 11m
- default cmk-init-install-discover-pod-oran-aio 0/2 Completed 0 10m
- default cmk-reconcile-nodereport-ds-oran-aio-qbdqb 2/2 Running 0 10m
- default cmk-webhook-deployment-6f9dd7dfb6-2lj2p 1/1 Running 0 10m
-- For detail usage, please refer to `CMK user manual`_
+Get back to pod and run the test_pmd
-.. _`CMK user manual`: https://github.com/intel/CPU-Manager-for-Kubernetes/blob/master/docs/user.md)
+::
+ cd $RTE_SDK/x86_64-native-linuxapp-gcc/app/
+
+ taskset -p --cpu-list 1
+ pid 1's current affinity list: 2,3,18,19
+
+ ./testpmd --socket-mem 1024,1024 -l 2,3 -w 0000:05:11.0 -w 0000:05:11.1 --file-prefix=testpmd_ -- --auto-
+ start --tx-first --stats-period 1 --disable-hw-vlan --eth-peer=0,"9e:fd:e6:dd:c1:02" --eth-
+ peer=1,"9e:fd:e6:dd:c1:01"
+ EAL: Detected 32 lcore(s)
+ EAL: No free hugepages reported in hugepages-2048kB
+ EAL: Probing VFIO support...
+ EAL: VFIO support initialized
+ EAL: PCI device 0000:05:11.0 on NUMA socket 0
+ EAL: probe driver: 8086:10ed net_ixgbe_vf
+ EAL: using IOMMU type 1 (Type 1)
+ EAL: PCI device 0000:05:11.1 on NUMA socket 0
+ EAL: probe driver: 8086:10ed net_ixgbe_vf
+ Auto-start selected
+ Ports to start sending a burst of packets first
+ Warning: lsc_interrupt needs to be off when using tx_first. Disabling.
+ USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
+ Configuring Port 0 (socket 0)
+ Port 0: 9E:FD:E6:DD:C1:01
+ Configuring Port 1 (socket 0)
+ Port 1: 9E:FD:E6:DD:C1:02
+ Checking link statuses...
+ Port0 Link Up. speed 10000 Mbps- full-duplex
+ Port1 Link Up. speed 10000 Mbps- full-duplex
+ Done
+ No commandline core given, start packet forwarding
+ io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP over anonymous pages
+ disabled
+ Logical Core 3 (socket 0) forwards packets on 2 streams:
+ RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=9E:FD:E6:DD:C1:01
+ RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=9E:FD:E6:DD:C1:02
+
+ io packet forwarding packets/burst=32
+ nb forwarding cores=1 - nb forwarding ports=2
+ port 0:
+ CRC stripping enabled
+ RX queues=1 - RX desc=128 - RX free threshold=32
+ RX threshold registers: pthresh=8 hthresh=8 wthresh=0
+ TX queues=1 - TX desc=512 - TX free threshold=32
+ TX threshold registers: pthresh=32 hthresh=0 wthresh=0
+ TX RS bit threshold=32 - TXQ flags=0xf01
+ port 1:
+ CRC stripping enabled
+ RX queues=1 - RX desc=128 - RX free threshold=32
+ RX threshold registers: pthresh=8 hthresh=8 wthresh=0
+ TX queues=1 - TX desc=512 - TX free threshold=32
+ TX threshold registers: pthresh=32 hthresh=0 wthresh=0
+ TX RS bit threshold=32 - TXQ flags=0xf01
+
+ Port statistics ====================================
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 56 RX-missed: 0 RX-bytes: 4096
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 64 TX-errors: 0 TX-bytes: 4096
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 0
+ ############################################################################
+
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 432 RX-missed: 0 RX-bytes: 27712
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 461 TX-errors: 0 TX-bytes: 30080
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 0
+ ############################################################################
+
+ Port statistics ====================================
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 14124641 RX-missed: 0 RX-bytes: 903977344
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 14170205 TX-errors: 0 TX-bytes: 906893376
+
+ Throughput (since last show)
+ Rx-pps: 7068409
+ Tx-pps: 7091206
+ ############################################################################
+
+
+
+
+
+
References
----------
+
+- `StarlingX`_
-- `Flannel`_
-- `Doc for dashboard`_
-- `Multus-CNI quick start`_
-- `CMK operator manual`_
-- `CMK user manual`_
-
-.. _`Flannel`: https://github.com/coreos/flannel/blob/master/README.md
+.. _`StarlingX`: https://docs.starlingx.io/
+
Code Review / pti / rtp.git / blobdiff