-.. ==================================================================================
-.. Copyright (c) 2019 Nokia
-.. Copyright (c) 2018-2019 AT&T Intellectual Property.
-..
-.. Licensed under the Apache License, Version 2.0 (the "License");
-.. you may not use this file except in compliance with the License.
-.. You may obtain a copy of the License at
-..
-.. http://www.apache.org/licenses/LICENSE-2.0
-..
-.. Unless required by applicable law or agreed to in writing, software
-.. distributed under the License is distributed on an "AS IS" BASIS,
-.. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-.. See the License for the specific language governing permissions and
-.. limitations under the License.
-.. ==================================================================================
-
-A1 Dev Guide
-============
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+A1 Developer Guide
+==================
+
+.. contents::
+ :depth: 3
+ :local:
Tech Stack
-==========
+----------
- OpenAPI3
- Connexion
- Flask with Gevent serving
-- Python3.7
+- Python3.8
-Version bumping
-===============
+Version bumping A1
+------------------
This project follows semver. When changes are made, the versions are in:
4) ``integration_tests/a1mediator/Chart.yaml``
-6) ``a1/openapi.yml`` (this is an API version, not a software version)
+5) ``a1/openapi.yaml`` (this is an API version, not a software version; no need to bump on patch changes)
+
+6) in the ric-plt repo that contains a1 helm chart, ``values.yaml``, ``Chart.yml``
+
+
+Version bumping RMR
+-------------------
+
+As of 2020/02/13, A1 (Dockerfile), Dockerfile-Unit-Test, and all three integration test receivers use a base image from o-ran-sc.
+The rmr version is in that base image.
+When version changes are made in that image, rebuilding those 5 containers in the A1 repo will pick it up (or just A1 itself for prod usage).
+
+However, there are two items in this repo that must be kept in sync: ``rmr-version.yaml``, which controls what rmr gets installed for unit testing in Jenkins, and ``integration_tests/install_rmr.sh`` which is a useful script for a variety of local testing.
+
+Version bumping Python
+----------------------
+
+If you want to update the version of python itself (ie just done from 37 to 38):
+
+1) ``Dockerfile``
+
+2) ``Dockerfile-Unit-Test``
-7) in the it/dep repo that contains a1 helm chart, ``values.yaml``, ``Chart.yml``
+3) ``tox.ini``
Unit Testing
-============
+------------
+
Note, before this will work, for the first time on the machine running the tests, run ``./install_deps.sh``. This is only needed once on the machine.
Also, this requires the python packages ``tox`` and ``pytest``.
docker build --no-cache -t a1test:latest -f Dockerfile-Unit-Test
Integration testing
-===================
-This tests A1’s external API with two test receivers. This depends on helm+k8s, meaning you cannot run this if this is not installed.
-
-Unlike the unit tests, however, this does not require rmr to be installed on the base system, as everything
-runs in Docker, and the Dockerfiles provide/install rmr.
-
-First, build the latest A1 you are testing (from the root):
-::
+-------------------
- docker build --no-cache -t a1:latest .
+This tests A1’s external API with three test receivers. This requires docker, kubernetes and helm.
-Note that this step also runs the unit tests, since running the unit tests are part of the Dockerfile for A1.
+Build all the images:
-If you've never run the integration tests before, build the test receiver, which is referenced in the helm chart:
::
- cd integration_tests
- docker build --no-cache -t testreceiver:latest .
+ docker build -t a1:latest .
+ cd integration_tests/testxappcode
+ docker build -t delayreceiver:latest -f Dockerfile-delay-receiver .
+ docker build -t queryreceiver:latest -f Dockerfile-query-receiver .
+ docker build -t testreceiver:latest -f Dockerfile-test-receiver .
+
-You do not need the "bombarder" image as they are not currently used in the integration tests (that is more for load testing).
+Then, run all the tests from the root (this requires the python packages ``tox``, ``pytest``, and ``tavern``).
-Finally, run all the tests from the root (this requires the python packages ``tox``, ``pytest``, and ``tavern``).
::
tox -c tox-integration.ini
This script:
-1. Deploys 3 helm charts into a local kubernetes installation
+1. Deploys 3 helm charts (5 containers) into a local kubernetes installation
2. Port forwards a pod ClusterIP to localhost
3. Uses “tavern” to run some tests against the server
4. Barrages the server with apache bench
5. Tears everything down
-
-Unless you're a core A1 developer, you should probably stop here. The below instructions
-are for running A1 locally, without docker, and is much more involved (however useful when developing a1).
-
-Running locally
-===============
-
-1. Before this will work, for the first time on that machine, run ``./install_deps.sh``
-
-2. It also requires rmr-python >= 0.10.1 installed. (The dockerfile also
- does this)
-
-3. Create a ``local.rt`` file and copy it into ``/opt/route/local.rt``.
- Note, the example one in ``integration_tests`` will need to be modified for
- your scenario and machine.
-
-4. Copy a ric manifest into ``/opt/ricmanifest.json`` and an rmr mapping
- table into ``/opt/rmr_string_int_mapping.txt``. You can use the test
- ones packaged if you want:
-
- ::
-
- cp tests/fixtures/ricmanifest.json /opt/ricmanifest.json
- cp tests/fixtures/rmr_string_int_mapping.txt /opt/rmr_string_int_mapping.txt
-
-5. Then:
-
- ::
-
- sudo pip install -e .
- set -x LD_LIBRARY_PATH /usr/local/lib/; set -x RMR_SEED_RT /opt/route/local.rt ; set -x RMR_RCV_RETRY_INTERVAL 500; set -x RMR_RETRY_TIMES 10;
- /usr/bin/run.py
-
-
-There are also two test receivers in ``integration_tests`` you can run locally.
-The first is meant to be used with the ``control_admission`` policy
-(that comes in test fixture ric manifest):
-
-::
-
- set -x LD_LIBRARY_PATH /usr/local/lib/; set -x RMR_SEED_RT /opt/route/local.rt ; python receiver.py
-
-The second can be used against the ``test_policy`` policy to test the
-async nature of A1, and to test race conditions. You can start it with
-several env variables as follows:
-
-::
-
- set -x LD_LIBRARY_PATH /usr/local/lib/; set -x RMR_SEED_RT /opt/route/local.rt ; set -x TEST_RCV_PORT 4563; set -x TEST_RCV_RETURN_MINT 10001; set -x TEST_RCV_SEC_DELAY 5; set -x TEST_RCV_RETURN_PAYLOAD '{"ACK_FROM": "DELAYED_TEST", "status": "SUCCESS"}' ; python receiver.py
-
-To test the async nature of A1, trigger a call to ``test_policy``, which
-will target the delayed receicer, then immediately call
-``control_admission``. The ``control_admission`` policy return should be
-returned immediately, whereas the ``test_policy`` should return after
-about ``TEST_RCV_SEC_DELAY 5``. The ``test_policy`` should not block A1
-while it is sleeping, and both responses should be correct.
-
-::
-
- curl -v -X PUT -H "Content-Type: application/json" -d '{}' localhost:10000/ric/policies/test_policy
- curl -v -X PUT -H "Content-Type: application/json" -d '{ "enforce":true, "window_length":10, "blocking_rate":20, "trigger_threshold":10 }' localhost:10000/ric/policies/admission_control_policy
- curl -v localhost:10000/ric/policies/admission_control_policy
- curl -v localhost:10000/a1-p/healthcheck
-
-Finally, there is a test “bombarder” that will flood A1 with messages
-with good message types but bad transaction IDs, to test A1’s resilience
-against queue-overflow attacks
-
-::
-
- set -x LD_LIBRARY_PATH /usr/local/lib/; set -x RMR_SEED_RT /opt/route/local.rt ; python bombard.py
Code Review / ric-plt / a1.git / blobdiff