.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
+.. SPDX-License-Identifier: CC-BY-4.0
+.. Copyright (C) 2019 Wind River Systems, Inc.
+
+INF Developer Guide
+===================
.. contents::
:depth: 3
:local:
-Developer-Guides
-================
+1. About the INF project
+************************
+
+This project is a reference implementation of O-Cloud infrastructure which is based on StarlingX, and it supports multi-OS.
+
+* Currently the following OS are supported:
+
+ * Debian 11 (bullseye)
+ * CentOS 7
+ * Yocto 2.7 (warrior)
+
+Notes:
+ * Debian based is the recommended platfrom.
+
+1.1 About the Debian based implementaion
+----------------------------------------
+The project provde wrapper scripts to automate all the steps of `StarlingX Debian Build Guide`_ to build out the reference platform as an installable ISO image.
+
+.. _`StarlingX Debian Build Guide`: https://wiki.openstack.org/wiki/StarlingX/DebianBuildEnvironment
+
+1.2 About the CentOS based implementaion
+----------------------------------------
+The project provde wrapper scripts to automate all the steps of `StarlingX Build Guide`_ to build out the reference platform as an installable ISO image.
+
+.. _`StarlingX Build Guide`: https://docs.starlingx.io/developer_resources/build_guide.html
+
+1.3 About the Yocto based implementation
+----------------------------------------
+
+The project provde wrapper scripts to pull all required Yocto/OE layers to build out the reference platform as an installable ISO image.
+
+To contribute on this project, basic knowledge of Yocto/OpenEmbedded is needed, please refer to the following docs if you want to learn about how to develop with Yocto/OpenEmbedded:
+
+- `Yocto dev manual`_
+- `OpenEmbedded wiki`_
+
+.. _`Yocto dev manual`: https://www.yoctoproject.org/docs/2.6.3/dev-manual/dev-manual.html
+.. _`OpenEmbedded wiki`: http://www.openembedded.org/wiki/Main_Page
+
+
+2. How to build the INF project
+*******************************
+
+2.1 How to build the Debian based image
+---------------------------------------
+
+2.1.1 Prerequisite for Debian build environment
++++++++++++++++++++++++++++++++++++++++++++++++
+
+NOTE: The build system for Debian requires a Linux system with Docker and python 3.x installed. The the following steps have been tested on CentOS 7 and Ubuntu 20.04.
+
+* Refer to `Install docker on ubuntu`_ or `Install docker on centos`_ to install docker.
+* Refer to `Configure_Debian_build_environment`_ to install prerequisite packges and configure for Debian build environment.
+
+.. _`Install docker on ubuntu`: https://docs.docker.com/engine/install/ubuntu/
+.. _`Install docker on centos`: https://docs.docker.com/engine/install/centos/
+.. _`Configure_Debian_build_environment`: https://wiki.openstack.org/wiki/StarlingX/DebianBuildEnvironment#Configure_build_environment
+
+2.1.2 Use wrapper script build_inf_debian.sh to build the Debian based image
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+::
+
+ # Get the wrapper script to build the debian image
+ $ wget -O build_inf_debian.sh 'https://gerrit.o-ran-sc.org/r/gitweb?p=pti/rtp.git;a=blob_plain;f=scripts/build_inf_debian/build_inf_debian.sh;hb=HEAD'
+
+ $ chmod +x build_inf_debian.sh
+ $ WORKSPACE=/path/to/workspace
+ $ ./build_inf_debian.sh -w ${WORKSPACE}
+
+If all go well, you will get the ISO image in:
+${WORKSPACE}/prj_output/inf-image-debian-all-x86-64.iso
+
+2.2 How to build the CentOS based image
+---------------------------------------
+
+NOTE: This only supports build on CentOS 7 which will be EOL 30 Jun 2024.
+
+2.2.1 Prerequisite for CentOS build environment
++++++++++++++++++++++++++++++++++++++++++++++++
+
+NOTE: This step needs the user has sudo permission.
+
+::
+
+ # Get the wrapper script for preparing the build environment
+ $ wget -O build_inf_prepare.sh https://gerrit.o-ran-sc.org/r/gitweb?p=pti/rtp.git;a=blob_plain;f=scripts/build_inf_centos/build_inf_prepare_jenkins.sh;hb=HEAD
+
+ $ chmod +x build_inf_prepare.sh
+ $ WORKSPACE=/path/to/workspace
+ $ ./build_inf_prepare.sh -w ${WORKSPACE}
+
+2.2.2 Use wrapper script build_inf_centos.sh to build the CentOS based image
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+::
+
+ # Get the wrapper script to build the centos image
+ $ wget -O build_inf_centos.sh 'https://gerrit.o-ran-sc.org/r/gitweb?p=pti/rtp.git;a=blob_plain;f=scripts/build_inf_centos/build_inf_centos.sh;hb=HEAD'
+
+ $ chmod +x build_inf_centos.sh
+ $ WORKSPACE=/path/to/workspace
+ $ ./build_inf_centos.sh -w ${WORKSPACE}
+
+If all go well, you will get the ISO image in:
+${WORKSPACE}/prj_output/inf-image-centos-all-x86-64.iso
+
+
+2.3 How to build the Yocto based image
+--------------------------------------
+
+2.3.1 Prerequisite for Yocto build environment
+++++++++++++++++++++++++++++++++++++++++++++++
+
+* Your host need to meet the requirements for Yocto, please refer to:
+
+ * `Compatible Linux Distribution`_
+ * `Supported Linux Distributions`_
+ * `Required Packages for the Build Host`_
+
+The recommended and tested host is Ubuntu 16.04/18.04 and CentOS 7.
+
+* To install the required packages for Ubuntu 16.04/18.04:
+.. _`Compatible Linux Distribution`: https://www.yoctoproject.org/docs/2.7.3/brief-yoctoprojectqs/brief-yoctoprojectqs.html#brief-compatible-distro
+.. _`Supported Linux Distributions`: https://www.yoctoproject.org/docs/2.7.3/ref-manual/ref-manual.html#detailed-supported-distros
+.. _`Required Packages for the Build Host`: https://www.yoctoproject.org/docs/2.7.3/ref-manual/ref-manual.html#required-packages-for-the-build-host
-.. note:
-.. * This section is used to describe what a contributor needs to know in order to work on the componenta
+::
-.. * this should be very technical, aimed at people who want to help develop the components
+ $ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
+ build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
+ xz-utils debianutils iputils-ping make xsltproc docbook-utils fop dblatex xmlto \
+ python-git
-.. * this should be how the component does what it does, not a requirements document of what the component should do
+* To install the required packages for CentOS 7:
-.. * this should contain what language(s) and frameworks are used, with versions
+::
-.. * this should contain how to obtain the code, where to look at work items (Jira tickets), how to get started developing
-
-.. * This note must be removed after content has been added.
+ $ sudo yum install -y epel-release
+ $ sudo yum makecache
+ $ sudo yum install gawk make wget tar bzip2 gzip python unzip perl patch \
+ diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath socat \
+ perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue perl-Digest-SHA \
+ python34-pip xz which SDL-devel xterm
+2.3.2 Use wrapper script build_inf_yocto.sh to setup build the Yocto based image
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-Processes
----------
+::
+ # Get the wrapper script with either curl or wget
+ $ curl -o build_inf_yocto.sh 'https://gerrit.o-ran-sc.org/r/gitweb?p=pti/rtp.git;a=blob_plain;f=scripts/build_inf_yocto/build_inf_yocto.sh;hb=HEAD'
+ $ wget -O build_inf_yocto.sh 'https://gerrit.o-ran-sc.org/r/gitweb?p=pti/rtp.git;a=blob_plain;f=scripts/build_inf_yocto/build_inf_yocto.sh;hb=HEAD'
+ $ chmod +x build_inf_yocto.sh
+ $ WORKSPACE=/path/to/workspace
+ $ ./build_inf_yocto.sh -w ${WORKSPACE}
-Actions
--------
+If all go well, you will get the ISO image in:
+${WORKSPACE}/prj_output/inf-image-yocto-aio-x86-64.iso
Code Review / pti / rtp.git / blobdiff