-Change Summaries
+API and build change and fix summaries. Doc correctsions
+and/or changes are not mentioned here; see the commit messages.
-2019 July 15; Version 1.0.39
+2020 March 10; version 3.5.1
+ Add missing health check message types.
+
+2020 March 9; version 3.5.0
+ Added new wormhole send function: rmr_wh_call().
+
+2020 March 6; version 3.4.0
+ Add new wormhole state function: rmr_wh_state().
+
+2020 March 5; Version 3.3.1
+ Correct several "bugs" identified by automatic code analysis.
+
+2020 March 4; Version 3.3.0
+ Add SI95 based unit testing
+ Health check support binary added (reason for minor bump)
+
+2020 February 29; Version 2.4.0
+ Add consolidated testing under CMake
+ Add support binary for health check (SI95 only)
+
+2020 February 28; Version 2.3.6
+ Fix bug in Rt. Mgr comm which prevented table ID from being
+ sent on ack message (RIC-232).
+
+2020 February 26; version 3.2.5
+ Fix source address bug in SI95 receive/send funcitons.
+ Fix threading issues involving session disconnection in SI95
+ Remove unused SI95 status variable.
+
+2020 February 24; version 3.2.4
+ Fix meid bug (RIC-220) causing core dump.
+
+2020 February 21; version 3.2.3
+ Add meid routing support to the SI95 interface.
+
+2020 February 20; version 3.2.2
+ Fix receive thread related core dump (ring early unlock).
+
+2020 February 19; version 3.2.1
+ Added missing message types (E2-Setup)
+
+2020 February 18; version 3.2.0
+ Added support for new Route Manager and it's ability to accept
+ a request for table update.
+
+2020 February 14; version 3.1.3
+ Fix bug in SIsend which was causing a core dump in some cases
+ where the application attempted to send on a connection that
+ had disconnected. (RIC-207).
+
+2020 February 6; version 3.1.2
+ Fix disconnection detection bug in interface to SI95.
+
+2020 January 31; verison 3.1.1
+ Allow route table thread logging to be completely disabled
+ when logging is turned off.
+
+2020 January 26; verison 3.1.0
+ First step to allowing the user programme to control messages
+ written to standard error. Introduces the rmr_set_vlevel()
+ function, and related environment variable.
+
+2020 January 24; verison 3.0.5
+ Fix bug in SI95 with receive buffer allocation.
+
+2020 January 23; verison 3.0.4
+ Fix bug in SI95 causing excessive CPU usage on poll.
+
+2020 January 22; verison 3.0.3
+ Enable thread support for multiple receive threads.
+
+2020 January 21; verison 3.0.2
+ Fix bug in SI95 (missing reallocate payload function).
+
+2020 January 20; verison 3.0.1
+ Enable support for dynamic route table updates via RMR session.
+
+2020 January 16; version 3.0.0
+ Introduce support for SI95 transport library to replace NNG.
+ (RMR library versions will use leading odd numbers to avoid tag collisions
+ with the wrapper tags which will use even numbers.)
+
+2019 December 9; version 1.13.1
+ Correct documentation and missing rel-notes update for RTD.
+
+2019 December 6; version 1.13.0
+ Add ability to route messages based on the MEID in a message combined
+ with the message type/subscription-ID.
+
+
+2019 November 14; version 1.11.1 (Amber)
+ Fix bug in payload reallocation function; correct length of payload
+ was not always copied.
+
+2019 November 13; version 1.12.1
+ New message type constants added to support A1.
+
+2019 November 4; version 1.11.0 (Amber)
+ Version bump to move away from the 1.10.* to distinguish between
+ release A and the trial.
+
+2019 November 7; version 1.12.0
+ Version cut to support continued development for next release
+ preserving the 1.11.* versions for release 1 (Amber) and
+ related fixes.
+
+2019 October 31; version 1.10.2
+ Provide the means to increase the payload size of a received message
+ without losing the data needed to use the rmr_rts_msg() funciton.
+
+2019 October 21; version 1.10.1
+ Fix to prevent null message buffer from being returned by the timeout
+ receive function if the function is passed one to reuse.
+
+2019 October 21; version 1.10.1
+ Add periodic dump of send count info to stderr.
+
+2019 September 27; version 1.9.0
+ Python bindings added receive all queued function and corrected a unit test
+
+2019 September 25; version 1.8.3
+ Correct application level test issue causing timing problems during
+ jenkins verification testing at command and merge
+
+ Handle the NNG connection shutdown status which may now be
+ generated when a connection throug a proxy is reset.
+
+2019 September 25; version 1.8.2
+ Correct bug in rmr_torcv_msg() when timeout set to zero (0).
+
+2019 September 19; version 1.8.1
+ Correct missing constant for wrappers.
+
+2019 September 19; version 1.8.0
+ New message types added:
+ RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
+
+2019 September 17; version 1.7.0
+ Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
+ in the environment before rmr_init() is invoked to revert to
+ synchronous first TCP connections. (Recovery connection attempts
+ have always been asynchronous).
+
+2019 September 3; version 1.6.0
+ Fix bug in the rmr_rts_msg() function. If a return to sender message
+ failed, the source IP address was not correctly adjusted and could
+ cause the message to be "reflected" back to the sender on a retry.
+
+ Added the ability to set the source "ID" via an environment var
+ (RMR_SRC_ID). When present in the environment, the string will
+ be placed in to the message header as the source and thus be used
+ by an application calling rmr_rts_smg() to return a response to
+ the sender. If this environment variable is not present, the host
+ name (original behaviour) is used.
+
+2019 August 26; version 1.4.0
+ New message types were added.
+
+2019 August 16; version 1.3.0
+ New mesage types added.
+
+2019 August 13; version 1.2.0 (API change, non-breaking)
+ The function rmr_get_xact() was added to proide a convenient
+ way to extract the transaction field from a message.
+
+2019 August 8; version 1.1.0 (API change)
+ This change should be backward compatable/non-breaking
+ A new field has been added to the message buffer (rmr_mbuf_t).
+ This field (tp_state) is used to communicate the errno value
+ that the transport mechanism might set during send and/or
+ receive operations. C programmes should continue to use
+ errno directly, but in some environments wrappers may not be
+ able to access errno and this provides the value to them.
+ See the rmr_alloc_msg manual page for more details.
+
+2019 August 6; version 1.0.45 (build changes)
+ Support for the Nanomsg transport library has been dropped.
+ The library librmr.* will no longer be included in packages.
+
+ Packages will install RMR libraries into the system preferred
+ target directory. On some systems this is /usr/local/lib
+ and on others it is /usr/local/lib64. The diretory is
+ determined by the sytem on which the package is built and
+ NOT by the system installing the package, so it's possible
+ that the RMR libraries end up in a strange location if the
+ .deb or .rpm file was generated on a Linux flavour that
+ has a different preference than the one where the package
+ is installed.
+
+2019 August 6; version 1.0.44 (API change)
+ Added a new message type constant.
+
+2019 July 15; Version 1.0.39 (bug fix)
Prevent unnecessary usleep in retry loop.
-2019 July 12; Version 1.0.38
+2019 July 12; Version 1.0.38 (API change)
Added new message types to RIC_message_types.h.
2019 July 11; Version 1.0.37
- librmr and librmr_nng
+ librmr and librmr_nng
- Add message buffer API function rmr_trace_ref()
(see rmr_trace_ref.3 manual page in dev package).
Code Review / ric-plt / lib / rmr.git / blobdiff