+
+#if 0
+ CmLteCellId cellId; /*!< Cell ID */
+ uint16_t pci; /*!< Physical Cell ID */
+ uint8_t maxMsg3PerUlSlot; /*!< Maximum MSG3 that may be scheduled
+ per uplink slot */
+ uint8_t maxUePerUlSlot; /*!<Maximum UE scheduled per UL slot */
+ uint8_t maxUePerDlSlot; /*!<Maximum UE scheduled per DL in a TTI */
+ Bool isCpUlExtend; /*!< Cyclic prefix: TRUE-extended,
+ FALSE-normal for UL */
+ Bool isCpDlExtend; /*!< Cyclic prefix: TRUE-extended,
+ FALSE-normal for DL*/
+ RgrDlHqCfg dlHqCfg; /*!< HARQ related configuration */
+ RgrCfiCfg cfiCfg; /*!< CFI for PDCCH */
+ RgrUlTrgCqiCfg trgUlCqi; /*!< Target UL CQI */
+ RgrDlCmnCodeRateCfg dlCmnCodeRate; /*!< Coding rate for common DL channels:
+ Expressed in multiples of 1024 */
+ RgrUlCmnCodeRateCfg ulCmnCodeRate; /*!< Coding rate for common UL channels:
+ Expressed as index into CQI table */
+ RgrBwCfg bwCfg; /*!< Bandwidth configuration */
+ RgrUlPwrCfg pwrCfg; /*!< Cell-specific power configuration */
+ RgrPuschCfg puschCfg; /*!< Cell-specific hopping configuration */
+ RgrPreambleSetCfg macPreambleSet; /*!< Range of PDCCH Order Preamble IDs
+ to be managed by MAC */
+
+ uint16_t bcchTxPwrOffset; /*!< Tx Pwr Offset for BCCH tx on PDSCH.
+ Offset to the reference signal
+ power. Value: 0 -> 10000,
+ representing -6 dB to 4 dB in 0.001
+ dB steps */
+ uint16_t pcchTxPwrOffset; /*!< Tx Pwr Offset for PCCH tx.
+ Offset to the reference signal
+ power. Value: 0 -> 10000,
+ representing -6 dB to 4 dB in 0.001
+ dB steps */
+ uint16_t rarTxPwrOffset; /*!< Tx Pwr Offset for RAR tx.
+ Offset to the reference signal
+ power. Value: 0 -> 10000,
+ representing -6 dB to 4 dB in 0.001
+ dB steps */
+ uint8_t nrMu; /*!<Indicates the number of Slot for a radio frame*/
+ uint8_t tbScalingField;/*!< TB Scaling Factor used while
+ calucating TBS for P-RNTI, or
+ RA-RNTI*/
+ RgrSlotCfg slotCfg; /*!< Slot config as per 38.211, sec
+ 11.1 and
+ 38.331
+ tdd-UL-DL-configcommon */
+#if 0 //TODO: uncomment after study
+ RgrDataDmrsTypAPosEnum dmrsTypAPos; /*!< Position of (first) DL DM-RS is
+ included in NR-PBCH payload. value is 2 or 3 */
+
+ RgrSsPbchBlockCfg ssPbchCfg; /*!< SS PBCH Block configuration */
+ RgrFreqRangeType freqRangeType; /*!<Cell Frequency Range type (<=
+ 3Ghz, 3 < x <= 6Ghz, > 6Ghz)*/
+ RgrType0PdcchCSSCfg type0PdcchCSSCfg; /*!< Type 0 CSS Config params */
+ RgrFreqInfoDlCfg freqInfoDlCfg; /*!< DL Frequency information
+ config */
+ RgrSulCellCfg sulCellCfg; /*!< SUL Cell config */
+ RgrUlCfgCmn ulCmnCfg; /*!< initial UL Bwp and Ul freq
+ information */
+#endif
+ Bool initDlBwpPres; /*!< intial common
+ DL BWP is present or not */
+ RgrBwpDlCmn initDlBwp; /*!<Initial Dl BWP*/
+ RgrAddlBwpCfg addlBwpCfg; /*!<Additional BWP Configuration apart from
+ Initial BWP*/
+
+ RgrCellNsCfgInfo nsCfg; /*!< NSI Cfg */
+
+ RgrCellPfsCfgInfo pfsCfg; /*!< Pfs Config */
+ Bool isRateMatchSsPbchEnbld; /*!<PDSCH rate match enabled for SS PBCH */
+ Bool isRateMatchCsetEnbld; /*!<PDSCH rate match enabled */
+#endif
+#if 1