VES chart updates

[it/dep.git] / docs / installation-virtualbox.rst

diff --git a/docs/installation-virtualbox.rst b/docs/installation-virtualbox.rst
index 9a6fe88..98bc2bb 100644 (file)
--- a/docs/installation-virtualbox.rst
+++ b/docs/installation-virtualbox.rst
@@ -18,30 +18,30 @@
 
 
 Networking
 
 
 Networking

-----------
+^^^^^^^^^^

 The set up requires two VMs connected by a private network.  With VirtualBox, this can be
 done by going under its "Preferences" menu and setting up a private NAT network.
 
 The set up requires two VMs connected by a private network.  With VirtualBox, this can be
 done by going under its "Preferences" menu and setting up a private NAT network.
 

-#. "Preference", then select the "Network" tab;
+#. Pick "Preferences", then select the "Network" tab;

 #. Click on the "+" icon to create a new NAT network.  A new entry will appear in the NAT networks list
 #. Double click on the new network to edit its details; give it a name such as "RICNetwork"
 #. Click on the "+" icon to create a new NAT network.  A new entry will appear in the NAT networks list
 #. Double click on the new network to edit its details; give it a name such as "RICNetwork"

-#. On the next page, make sure to check: "Enable Network", uncheck the "Supports DHCP" box, and make a note of the "Network CIDR" (for this example, it is 10.0.2.0/24);
-#. Click on the "Port Forwarding" button to create the following rules:
+#. In the dialog, make sure to check the "Enable Network" box, uncheck the "Supports DHCP" box, and make a note of the "Network CIDR" (for this example, it is 10.0.2.0/24);
+#. Click on the "Port Forwarding" button then in the table create the following rules:

 
    #. "ssh to ric", TCP, 127.0.0.1, 22222, 10.0.2.100, 22;
    #. "ssh to aux", TCP, 127.0.0.1, 22223, 10.0.2.101, 22;
    #. "entry to ric", TCP, 127.0.0.1, 22224, 10.0.2.100, 32080;
    #. "entry to aux", TCP, 127.0.0.1, 22225, 10.0.2.101, 32080.
 
 
    #. "ssh to ric", TCP, 127.0.0.1, 22222, 10.0.2.100, 22;
    #. "ssh to aux", TCP, 127.0.0.1, 22223, 10.0.2.101, 22;
    #. "entry to ric", TCP, 127.0.0.1, 22224, 10.0.2.100, 32080;
    #. "entry to aux", TCP, 127.0.0.1, 22225, 10.0.2.101, 32080.
 

-#. "Ok" all the way back to create the network.
+#. Click "Ok" all the way back to create the network.

 
 
 Creating VMs
 
 
 Creating VMs

-------------
+^^^^^^^^^^^^

 
 Create a VirtualBox VM:
 
 
 Create a VirtualBox VM:
 

-#. "New", then enter the following in the pop-up: Name it for example **myric**, of "Linux" type, and at least 4G RAM and 10G disk;
+#. "New", then enter the following in the pop-up: Name it for example **myric**, of "Linux" type, and at least 6G RAM and 20G disk;

 #. "Create" to create the VM.  It will appear in the list of VMs.
 #. Highlight the new VM entry, right click on it, select "Settings".
 
 #. "Create" to create the VM.  It will appear in the list of VMs.
 #. Highlight the new VM entry, right click on it, select "Settings".
 


@@ -51,31 +51,32 @@ Create a VirtualBox VM:
 
       #. Check "Enable Network Adapter";
       #. Attached to "NAT Network";
 
       #. Check "Enable Network Adapter";
       #. Attached to "NAT Network";

-      #. Network name for what was created in the previous section: "RICNetwork".
+      #. Select the Network that was created in the previous section: "RICNetwork".

 
 Repeat the process and create the second VM named **myaux**.
 
 
 Booting VM and OS Installation
 
 Repeat the process and create the second VM named **myaux**.
 
 
 Booting VM and OS Installation

-------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 
 

-Follow the OS installation steps to install OS to the VM virtual disk media.  Make sure to install openssh server.
+Follow the OS installation steps to install OS to the VM virtual disk media.  During the setup you must
+configure static IP addresses as discussed next.  And make sure to install openssh server.

 
 
 VM Network Configuration
 
 
 VM Network Configuration

-------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^

 
 Depending on the version of the OS, the networking may be configured during the OS installation or after.
 The network interface is configured with a static IP address:
 
 - IP Address:  10.0.2.100 for myric or 10.0.2.101 for myaux;
 
 Depending on the version of the OS, the networking may be configured during the OS installation or after.
 The network interface is configured with a static IP address:
 
 - IP Address:  10.0.2.100 for myric or 10.0.2.101 for myaux;

-- Network: 10.0.2.10/24, or network mask 255.255.255.0
+- Subnet 10.0.2.0/24, or network mask 255.255.255.0

 - Default gateway: 10.0.2.1
 - Default gateway: 10.0.2.1

-- Name server: 8.8.8.8
+- Name server: 8.8.8.8; if access to that is is blocked, configure a local DNS server

 
 
 Accessing the VMs
 
 
 Accessing the VMs

------------------
+^^^^^^^^^^^^^^^^^

 
 Because of the port forwarding configurations, the VMs are accessible from the VirtualBox host via ssh.
 
 
 Because of the port forwarding configurations, the VMs are accessible from the VirtualBox host via ssh.