-Following minimum hardware requirements must be met for installation of O-RAN INF image:
-
-+--------------------+----------------------------------------------------+
-| **HW Aspect** | **Requirement** |
-| | |
-+--------------------+----------------------------------------------------+
-| **# of servers** | 1 |
-+--------------------+----------------------------------------------------+
-| **CPU** | 4 |
-| | |
-+--------------------+----------------------------------------------------+
-| **RAM** | 16G |
-| | |
-+--------------------+----------------------------------------------------+
-| **Disk** | 500G * 2 |
-| | |
-+--------------------+----------------------------------------------------+
-| **NICs** | 2 |
-| | |
-+--------------------+----------------------------------------------------+
-
-If want to enable the HA mode which is available in Cherry release, 2 servers are needed.
-
-
-ORAN INF Cherry test on Dell R740
-=================================
+Following minimum hardware requirements must be met for installation of O-RAN INF image with AIO-DX:
+
++-------------------+----------------------------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++-------------------+----------------------------------------------------------------------------+
+| **# of servers** | 2 |
++-------------------+----------------------------------------------------------------------------+
+| **CPU** | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket |
+| | or |
+| | Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option) |
++-------------------+----------------------------------------------------------------------------+
+| **RAM** | 32G |
+| | |
++-------------------+----------------------------------------------------------------------------+
+| **Disk** | * Disk 1: 500G(It's better to be SSD) |
+| | * Disk 2: 1 or more 500 GB for Ceph OSD |
++-------------------+----------------------------------------------------------------------------+
+| **NICs** | * OAM: 1x1GE |
+| | * Data: 1 or more x 10GE (optional) |
++-------------------+----------------------------------------------------------------------------+
+| **BIOS settings** | * Hyper-Threading technology enabled |
+| | * Virtualization technology enabled |
+| | * VT for directed I/O enabled |
+| | * CPU power and performance policy set to performance |
+| | * CPU C state control disabled |
+| | * Plug & play BMC detection disabled |
++-------------------+----------------------------------------------------------------------------+
+
+ORAN INF E Release tested on HP ProLiant DL380p Gen8
+====================================================