Code Review
/
o-du
/
l2.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
review
|
tree
raw
|
inline
| side by side
[Epic-ID: ODUHIGH-462][Task-ID: ODUHIGH-481] Adding Trigger for Ul/Dl data
[o-du/l2.git]
/
docs
/
installation-guide.rst
diff --git
a/docs/installation-guide.rst
b/docs/installation-guide.rst
index
b2353bc
..
3a74891
100644
(file)
--- a/
docs/installation-guide.rst
+++ b/
docs/installation-guide.rst
@@
-1,29
+1,27
@@
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-.. contents::
- :depth: 3
- :local:
-
O-DU High Installation Guide
*****************************
O-DU High Installation Guide
*****************************
-Abstract
-========
-
This document describes how to install O-DU High, it's dependencies and required system resources.
.. contents::
:depth: 3
:local:
This document describes how to install O-DU High, it's dependencies and required system resources.
.. contents::
:depth: 3
:local:
-Version history
+Version history
+---------------
+--------------------+--------------------+--------------------+--------------------+
| **Date** | **Ver.** | **Author** | **Comment** |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
+--------------------+--------------------+--------------------+--------------------+
| **Date** | **Ver.** | **Author** | **Comment** |
| | | | |
+--------------------+--------------------+--------------------+--------------------+
+| 2022-06-16 | 4.0.0 | Radisys, | F release |
+| | | HCL Technologies | |
+| | | Ltd. | |
++--------------------+--------------------+--------------------+--------------------+
| 2022-01-14 | 3.0.0 | Radisys, | e-release |
| | | HCL Technologies | |
| | | Ltd. | |
| 2022-01-14 | 3.0.0 | Radisys, | e-release |
| | | HCL Technologies | |
| | | Ltd. | |
@@
-41,7
+39,7
@@
Version history
Introduction
Introduction
-============
+------------
This document describes the hardware and software requirements along with guidelines on how to install O-DU High.
This document describes the hardware and software requirements along with guidelines on how to install O-DU High.
@@
-49,13
+47,13
@@
The audience of this document is assumed to have good knowledge in RAN concepts
Preface
Preface
-=======
+-------
O-DU High images can be built using the source code or corresponding docker images can be downloaded.
Hardware requirements
O-DU High images can be built using the source code or corresponding docker images can be downloaded.
Hardware requirements
-=====================
+---------------------
Following minimum hardware requirements must be met for installation of O-DU High
Following minimum hardware requirements must be met for installation of O-DU High
@@
-80,12
+78,12
@@
Following minimum hardware requirements must be met for installation of O-DU Hig
Software installation and deployment
Software installation and deployment
-==========================================
+-------------------------------------
This section describes the installation of the O-DU High on the reference hardware.
Libraries
This section describes the installation of the O-DU High on the reference hardware.
Libraries
-----------
+=========
Following libraries are required to compile and execute O-DU High:
Following libraries are required to compile and execute O-DU High:
@@
-108,7
+106,7
@@
Following libraries are required to compile and execute O-DU High:
Cloning code
Cloning code
---------------
+============
- Create a folder to clone the O-DU High code into. The folder is hereafter referred to as <O-DU High Directory>.
- Create a folder to clone the O-DU High code into. The folder is hereafter referred to as <O-DU High Directory>.
@@
-118,8
+116,8
@@
Cloning code
Setting up Netconf server (Only if O1 interface enabled)
Setting up Netconf server (Only if O1 interface enabled)
---------------------------------------------------------
-
+========================================================
+
Following steps are required to compile and run ODU with O1 interface enabled.
- Create a new netconf user
Following steps are required to compile and run ODU with O1 interface enabled.
- Create a new netconf user
@@
-152,29
+150,29
@@
Setting up Netconf server (Only if O1 interface enabled)
| Open the oamVesConfig.json and edit the details of OAM VES collector.
| Open the smoVesConfig.json and edit the details of SMO VES collector.
| Open the netconfConfig.json and edit the details of Netopeer server.
| Open the oamVesConfig.json and edit the details of OAM VES collector.
| Open the smoVesConfig.json and edit the details of SMO VES collector.
| Open the netconfConfig.json and edit the details of Netopeer server.
- | Install the yang modules and load initial configuration.
+
+- Install the yang modules and load initial configuration.
- Ubuntu :
| $cd <O-DU High Directory>/l2/build/scripts
| $sudo ./load_yang.sh
- Ubuntu :
| $cd <O-DU High Directory>/l2/build/scripts
| $sudo ./load_yang.sh
- - To enable Standard Defined VES format:
-
- | cd l2/src/o1/ves
-
- | Enable the Macro "StdDef" in file VesUtils.h
- | #define StdDef
-
- Start Netopeer2-server:
- Ubuntu :
| cd <O-DU High Directory>/l2/build/scripts
| sudo ./netopeer-server.sh start
- Start Netopeer2-server:
- Ubuntu :
| cd <O-DU High Directory>/l2/build/scripts
| sudo ./netopeer-server.sh start
+- In case standard defined VES format is to be enabled (this step is optional):
+
+ | cd l2/src/o1/ves
+
+ | Enable the Macro "StdDef" in file VesUtils.h
+ | #define StdDef
Compilation
Compilation
-------------
+===========
- Build O-DU High:
- Build O-DU High:
@@
-222,7
+220,7
@@
Compilation
Compilation with O1 interface enabled
Compilation with O1 interface enabled
---------------------------------------
+=====================================
- Build O-DU High:
- Build O-DU High: