#include "rmr.h"
#include "rmr_agnostic.h"
-/*
- Generate a simple route table (for all but direct route table testing).
- This gets tricky inasmuch as we generate two in one; first a whole table
- and then two update tables. The first is a table with a bad counter in the
- last record to test that we don't load that table and error. The second
- is a good update.
-*/
-static void gen_rt( uta_ctx_t* ctx ) {
- int fd;
- char* rt_stuff; // strings for the route table
-
- rt_stuff =
- "newrt|end\n" // end of table check before start of table found
- "# comment to drive full comment test\n"
- "\n" // handle blank lines
- " \n" // handle blank lines
- "mse|4|10|localhost:4561\n" // entry before start message
- "rte|4|localhost:4561\n" // entry before start message
- "newrt|start\n" // false start to drive detection
- "xxx|badentry to drive default case"
- "newrt|start\n"
- "rte|0|localhost:4560,localhost:4562\n" // these are legitimate entries for our testing
- "rte|1|localhost:4562;localhost:4561,localhost:4569\n"
- "rte|2|localhost:4562| 10\n" // new subid at end
- "mse|4|10|localhost:4561\n" // new msg/subid specifier rec
- "mse|4|localhost:4561\n" // new mse entry with less than needed fields
- " rte| 5 |localhost:4563 #garbage comment\n" // tests white space cleanup
- "rte|6|localhost:4562\n"
- "newrt|end\n";
-
- fd = open( "utesting.rt", O_WRONLY | O_CREAT, 0600 );
- if( fd < 0 ) {
- fprintf( stderr, "<BUGGERED> unable to open file for testing route table gen\n" );
- return;
- }
-
- setenv( "RMR_SEED_RT", "utesting.rt", 1 );
- write( fd, rt_stuff, strlen( rt_stuff ) ); // write in the whole table
-
- rt_stuff =
- "updatert|start\n" // this is an update to the table
- "mse|4|99|fooapp:9999,barapp:9999;logger:9999\n" // update just one entry
- "updatert|end | 3\n"; // bad count; this update should be rejected
- write( fd, rt_stuff, strlen( rt_stuff ) );
-
- rt_stuff =
- "updatert|start\n" // this is an update to the table
- "mse|4|10|fooapp:4561,barapp:4561;logger:9999\n" // update just one entry
- "del|2|-1\n" // delete an entry; not there so no action
- "del|2|10\n" // delete an entry
- "updatert|end | 3\n"; // end table; updates have a count as last field
- write( fd, rt_stuff, strlen( rt_stuff ) );
-
- close( fd );
- read_static_rt( ctx, 1 ); // force in verbose mode to see stats on tty if failure
- unlink( "utesting.rt" );
-}
-
+// ----------- local test support ----------------------------------------------------------
+#define CLONE 1 // convenience constants for payload realloc tests
+#define NO_CLONE 0
+#define COPY 1
+#define NO_COPY 0
/*
Drive the send and receive functions. We also drive as much of the route
module as it tests the user facing send/receive/call/rts functions. These tests
should exercise specific cases for the internal functions as they will not
specifically be driven elsewhere.
+
+ This requires the gen_rt funcition that is in the test_gen_rt module and should
+ have been included by the test module(s) which include this.
*/
static int sr_nng_test() {
uta_ctx_t* ctx; // context needed to test load static rt
uta_ctx_t* real_ctx; // real one to force odd situations for error testing
int errors = 0; // number errors found
rmr_mbuf_t* mbuf; // mbuf to send/receive
- rmr_mbuf_t* mb2; // error capturing msg buf
+ rmr_mbuf_t* mb2; // second mbuf when needed
int whid = -1;
int last_whid;
int state;
int size;
int i;
void* p;
+ char* payload_str;
//ctx = rmr_init( "tcp:4360", 2048, 0 ); // do NOT call init -- that starts the rtc thread which isn't good here
ctx = (uta_ctx_t *) malloc( sizeof( uta_ctx_t ) ); // alloc the context manually
rtc( NULL ); // coverage test with nil pointer
rtc( ctx );
+ setenv( "RMR_RTG_SVC", "4567", 1 ); // drive for edge case coverage to ensure no nil pointer etc
+ rtc( ctx );
+ setenv( "RMR_RTG_SVC", "tcp:4567", 1 );
+ rtc( ctx );
+ setenv( "RMR_RTG_SVC", "tcp:4567:error", 1 );
+ rtc( ctx );
+
+ // ------------- reallocation tests ------------------------------------------------------------
+ // we use mk_populated_msg() to create a message with mid/sid/plen pushed into the transport
+ // header to simulate a message having been sent and received which is what causes this data
+ // to push into the wire packet.
+
+ payload_str = "Stand Up and Cheer; OU78-82";
+
+
+ mbuf = mk_populated_msg( 1024, 0, 99, 100, strlen( payload_str ) );
+ memcpy( mbuf->payload, payload_str, mbuf->len );
+ mb2 = realloc_payload( mbuf, 512, NO_COPY, NO_CLONE );
+ errors += fail_if_nil( mb2, "realloc_payload (no copy) returned a nil pointer when reallocating with smaller size" );
+ errors += fail_if_false( mbuf == mb2, "non-clone realloc payload (no copy) of smaller size did not return the same buffer" );
+
+ mb2 = realloc_payload( NULL, 512, NO_COPY, NO_CLONE );
+ errors += fail_not_nil( mb2, "realloc payload did not return nil pointer when passed nil mbuf" );
+
+ mb2 = realloc_payload( mbuf, 0, NO_COPY, NO_CLONE );
+ errors += fail_not_nil( mb2, "realloc payload did not return nil pointer when passed bad len" );
+
+ fprintf( stderr, "<TEST> no copy/no clone test starts\n" );
+ mb2 = realloc_payload( mbuf, 2048, NO_COPY, NO_CLONE );
+ errors += fail_if_false( mbuf == mb2, "realloc payload (no copy) of larger size did not return the same msg buffer(1)" );
+ errors += fail_not_equal( mb2->mtype, -1, "realloc payload (no copy) did not reset mtype(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->sub_id, -1, "realloc payload (no copy) did not reset sub-id(a) to expected(b) value" );
+ errors += fail_if_nil( mb2, "realloc payload returned (no copy) a nil pointer when increasing payload len" );
+ errors += fail_not_equal( mb2->len, 0, "realloc payload payload len(a) not expected(b):" );
+ errors += fail_not_equal( rmr_payload_size( mb2), 2048, "realloc payload alloc len(a) not expected(b)" );
+
+ fprintf( stderr, "<TEST> copy/no clone test starts\n" );
+ mbuf = mk_populated_msg( 1024, 0, 99, 100, strlen( payload_str ) );
+ memcpy( mbuf->payload, payload_str, mbuf->len );
+ mb2 = realloc_payload( mbuf, 2048, COPY, NO_CLONE );
+ errors += fail_if_false( mbuf == mb2, "non-clone realloc payload (copy) of larger size did not return the same msg buffer(2)" );
+ errors += fail_if_nil( mb2, "realloc payload (copy) returned a nil pointer when increasing payload len)" );
+ errors += fail_not_equal( mb2->mtype, 99, "realloc payload (copy) did not reset mtype(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->sub_id, 100, "realloc payload (copy) did not reset sub-id(a) to expected(b) value" );
+ errors += fail_if_equal( mb2->len, 0, "realloc payload (copy) msg len(a) not expected(b)" );
+ errors += fail_not_equal( rmr_payload_size( mb2), 2048, "realloc payload (copy) alloc len(a) not expected(b)" );
+ errors += fail_not_equal( strncmp( payload_str, mb2->payload, strlen( payload_str )), 0, "realloc payload(copy) didn't copy payload" );
+
+ fprintf( stderr, "<TEST> copy/clone test starts requested buffer smaller than original\n" );
+ mbuf = mk_populated_msg( 1024, 0, 99, 100, strlen( payload_str ) );
+ memcpy( mbuf->payload, payload_str, mbuf->len );
+ mb2 = realloc_payload( mbuf, 512, COPY, CLONE );
+ errors += fail_if_true( mbuf == mb2, "realloc payload (clone+copy) of larger size did not return different message buffers" );
+ errors += fail_if_nil( mb2, "realloc payload (clone+copy) returned a nil pointer when increasing payload len)" );
+ errors += fail_not_equal( mb2->mtype, 99, "realloc payload (clone+copy) did not reset mtype(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->sub_id, 100, "realloc payload (clone+copy) did not reset sub-id(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->len, strlen( payload_str ), "realloc payload (clone+copy) msg len(a) not expected(b)" );
+ errors += fail_not_equal( rmr_payload_size( mb2), 1024, "realloc payload (clone+copy) alloc len(a) not expected(b)" );
+ errors += fail_not_equal( strncmp( payload_str, mb2->payload, strlen( payload_str )), 0, "realloc payload(clone+copy) didn't copy payload" );
+
+ // with a clone, we must verify that original message looks sane too
+ errors += fail_not_equal( mbuf->mtype, 99, "realloc payload (clone+copy) validation of unchanged mbuf->mtype fails" );
+ errors += fail_not_equal( mbuf->sub_id, 100, "realloc payload (clone+copy) validation of unchanged mbuf->subid fails" );
+ errors += fail_not_equal( mbuf->len, strlen( payload_str ), "realloc payload (clone+copy) validation of unchanged payload len fails" );
+ errors += fail_not_equal( rmr_payload_size( mbuf ), 1024, "realloc payload (clone+copy) validation of unchanged alloc length fails" );
+ errors += fail_not_equal( strncmp( payload_str, mbuf->payload, strlen( payload_str )), 0, "realloc payload(clone+copy) validation of unchanged payload fails" );
+
+
+ fprintf( stderr, "<TEST> copy/clone test starts requested buf is larger than original\n" );
+ mbuf = mk_populated_msg( 1024, 0, 99, 100, strlen( payload_str ) );
+ memcpy( mbuf->payload, payload_str, mbuf->len );
+ mb2 = realloc_payload( mbuf, 2048, COPY, CLONE );
+ errors += fail_if_true( mbuf == mb2, "realloc payload(clone+copy/lg) of larger size did not return different message buffers" );
+ errors += fail_if_nil( mb2, "realloc payload (clone+copy/lg) returned a nil pointer when increasing payload len)" );
+ errors += fail_not_equal( mb2->mtype, 99, "realloc payload (clone+copy/lg) did not reset mtype(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->sub_id, 100, "realloc payload (clone+copy/lg) did not reset sub-id(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->len, strlen( payload_str ), "realloc payload (clone+copy/lg) msg len(a) not expected(b)" );
+ errors += fail_not_equal( rmr_payload_size( mb2), 2048, "realloc payload (clone+copy/lg) alloc len(a) not expected(b)" );
+ errors += fail_not_equal( strncmp( payload_str, mb2->payload, strlen( payload_str )), 0, "realloc payload(clone+copy/lg) didn't copy payload" );
+
+ // with a clone, we must verify that original message looks sane too
+ errors += fail_not_equal( mbuf->mtype, 99, "realloc payload (clone+copy/lg) validation of unchanged mbuf->mtype fails" );
+ errors += fail_not_equal( mbuf->sub_id, 100, "realloc payload (clone+copy/lg) validation of unchanged mbuf->subid fails" );
+ errors += fail_not_equal( mbuf->len, strlen( payload_str ), "realloc payload (clone+copy/lg) validation of unchanged payload len fails" );
+ errors += fail_not_equal( rmr_payload_size( mbuf ), 1024, "realloc payload (clone+copy/lg) validation of unchanged alloc length fails" );
+ errors += fail_not_equal( strncmp( payload_str, mbuf->payload, strlen( payload_str )), 0, "realloc payload(clone+copy/lg) validation of unchanged payload fails" );
+
+ // original message should be unharmed, and new message should have no type/sid or payload len; total alloc len should be requested enlargement
+ fprintf( stderr, "<TEST> no copy/clone test starts requested buf is larger than original\n" );
+ mbuf = mk_populated_msg( 1024, 0, 99, 100, strlen( payload_str ) );
+ memcpy( mbuf->payload, payload_str, mbuf->len );
+ mb2 = realloc_payload( mbuf, 2048, NO_COPY, CLONE );
+ errors += fail_if_true( mbuf == mb2, "realloc payload (clone+nocopy) of larger size did not return different message buffers" );
+ errors += fail_if_nil( mb2, "realloc payload (clone+nocopy) returned a nil pointer when increasing payload len)" );
+ errors += fail_not_equal( mb2->mtype, -1, "realloc payload (clone+nocopy) did not reset mtype(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->sub_id, -1, "realloc payload (clone+nocopy) did not reset sub-id(a) to expected(b) value" );
+ errors += fail_not_equal( mb2->len, 0, "realloc payload (clone+nocopy) msg len(a) not expected(b)" );
+ errors += fail_not_equal( rmr_payload_size( mb2 ), 2048, "realloc payload (clone+nocopy) alloc len(a) not expected(b)" );
+ errors += fail_if_equal( strncmp( payload_str, mb2->payload, strlen( payload_str )), 0, "realloc payload(clone+nocopy) copied payload when not supposed to" );
+
+ // with a clone, we must verify that original message looks sane too
+ errors += fail_not_equal( mbuf->mtype, 99, "realloc payload (clone+nocopy) validation of unchanged mbuf->mtype fails" );
+ errors += fail_not_equal( mbuf->sub_id, 100, "realloc payload (clone+nocopy) validation of unchanged mbuf->subid fails" );
+ errors += fail_not_equal( mbuf->len, strlen( payload_str ), "realloc payload (clone+nocopy) validation of unchanged payload len fails" );
+ errors += fail_not_equal( rmr_payload_size( mbuf ), 1024, "realloc payload (clone+nocopy) validation of unchanged alloc length fails" );
+ errors += fail_not_equal( strncmp( payload_str, mbuf->payload, strlen( payload_str )), 0, "realloc payload (clone+nocopy) validation of unchanged payload fails" );
+
return !!errors;
}