# This is a script that contains all the functions needed for auto test
# Arg: local|remote|remote-remove [auto-clean]
+
#Formatting for 'echo' cmd
BOLD="\033[1m"
EBOLD="\033[0m"
EGREEN="\033[0m"
YELLOW="\033[33m\033[1m"
EYELLOW="\033[0m"
+SAMELINE="\033[0K\r"
+
+tmp=$(which python3)
+if [ $? -ne 0 ] || [ -z tmp ]; then
+ echo -e $RED"python3 is required to run the test environment, pls install"$ERED
+ exit 1
+fi
+tmp=$(which docker)
+if [ $? -ne 0 ] || [ -z tmp ]; then
+ echo -e $RED"docker is required to run the test environment, pls install"$ERED
+ exit 1
+fi
# Just resetting any previous echo formatting...
-echo -ne $EBOLD$ERED$EGREEN
+echo -ne $EBOLD
# source test environment variables
. ../common/test_env.sh
G2_COUNT=0
G3_COUNT=0
+# Vars to switch between http and https. Extra curl flag needed for https
+export RIC_SIM_HTTPX="http"
+export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
+export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
+export RIC_SIM_CERT_MOUNT_DIR="./cert"
+
+export MR_HTTPX="http"
+export MR_PORT=$MR_INTERNAL_PORT
+export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
+
+export SDNC_HTTPX="http"
+export SDNC_PORT=$SDNC_INTERNAL_PORT
+export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
+
#Localhost constant
LOCALHOST="http://localhost:"
# Make curl retries for http response codes set in this env var, space separated list of codes
AGENT_RETRY_CODES=""
+# Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
+AGENT_STAND_ALONE=0
+
# Var to hold 'auto' in case containers shall be stopped when test case ends
AUTO_CLEAN=""
RES_PASS=0
RES_FAIL=0
RES_CONF_FAIL=0
+RES_DEVIATION=0
+
+#File to keep deviation messages
+DEVIATION_FILE=".tmp_deviations"
+rm $DEVIATION_FILE &> /dev/null
#Var for measuring execution time
TCTEST_START=$SECONDS
+#File to save timer measurement results
+TIMER_MEASUREMENTS=".timer_measurement.txt"
+echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
+
+
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case: "$ATC
echo "----------------------------------- Started: "$(date)
__check_image_var " Consul" $1 "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG"
__check_image_var " CBS" $1 "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG"
__check_image_var " SDNC DB" $1 "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG"
+__check_image_var " SDNC ONAP A1 Adapter" $1 "SDNC_ONAP_A1_ADAPTER_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE_TAG"
+__check_image_var " SDNC ONAP DB" $1 "SDNC_ONAP_DB_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE_TAG"
#Errors in image setting - exit
if [ $IMAGE_ERR -ne 0 ]; then
fi
elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
if [ $1 == "remote-remove" ]; then
- echo -ne " Attempt to stop and remove container(s), if running - \033[0K\r"
+ echo -ne " Attempt to stop and remove container(s), if running - ${SAMELINE}"
tmp="$(docker ps -aq --filter name=${3})"
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker stop $tmp &> /dev/null
+ docker stop $tmp &> .dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Container(s) could not be stopped - try manual stopping the container(s)"$ERED
+ cat .dockererr
return 1
fi
fi
- echo -ne " Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"\033[0K\r"
+ echo -ne " Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
tmp="$(docker ps -aq --filter name=${3})" &> /dev/null
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker rm $tmp &> /dev/null
+ docker rm $tmp &> .dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Container(s) could not be removed - try manual removal of the container(s)"$ERED
+ cat .dockererr
return 1
fi
fi
echo -e " Attempt to stop and remove container(s), if running - "$GREEN"stopped removed"$EGREEN
- echo -ne " Removing image - \033[0K\r"
+ echo -ne " Removing image - ${SAMELINE}"
tmp="$(docker images -q ${4})" &> /dev/null
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker rmi $4 &> /dev/null
+ docker rmi $4 &> .dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Image could not be removed - try manual removal of the image"$ERED
+ cat .dockererr
return 1
fi
echo -e " Removing image - "$GREEN"removed"$EGREEN
tmp_im=""
fi
if [ -z "$tmp_im" ]; then
- echo -ne " Pulling image\033[0K\r"
- docker pull $4 > /dev/null
+ echo -ne " Pulling image${SAMELINE}"
+ docker pull $4 &> .dockererr
tmp_im=$(docker images ${4} | grep -v REPOSITORY)
if [ -z "$tmp_im" ]; then
echo ""
echo -e " Pulling image -$RED could not be pulled"$ERED
((IMAGE_ERR++))
+ cat .dockererr
return 1
fi
echo -e " Pulling image -$GREEN Pulled $EGREEN"
app="CBS"; __check_and_pull_image $1 "$app" $CBS_APP_NAME $CBS_IMAGE
app="SDNC DB"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
+echo -e $YELLOW"SDNC ONAP image is skipped"$EYELLOW
+#app="SDNC ONAP A1 Adapter"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
+#app="SDNC ONAP DB"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
+
# MR stub image not checked, will be built by this script - only local image
# CR stub image not checked, will be built by this script - only local image
cd $curdir
cd ../mrstub
echo " Building mrstub image: mrstub:latest"
-docker build -t mrstub . &> /dev/null
+docker build -t mrstub . &> .dockererr
if [ $? -eq 0 ]; then
echo -e $GREEN" Build Ok"$EGREEN
else
echo -e $RED" Build Failed"$ERED
((RES_CONF_FAIL++))
+ cat .dockererr
fi
cd $curdir
cd ../cr
echo " Building Callback Receiver image: callback-receiver:latest"
-docker build -t callback-receiver . &> /dev/null
+docker build -t callback-receiver . &> .dockererr
if [ $? -eq 0 ]; then
echo -e $GREEN" Build Ok"$EGREEN
else
echo -e $RED" Build Failed"$ERED
((RES_CONF_FAIL++))
+ cat .dockererr
fi
cd $curdir
echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
+echo -e " SDNC ONAP A1 Adapter\t$(docker images --format $format_string $SDNC_ONAP_A1_ADAPTER_IMAGE)" >> $docker_tmp_file
+echo -e " SDNC ONAP DB\t$(docker images --format $format_string $SDNC_ONAP_DB_IMAGE)" >> $docker_tmp_file
column -t -s $'\t' $docker_tmp_file
fi
fi
+ if [ $RES_DEVIATION -gt 0 ]; then
+ echo "Test case deviations"
+ echo "===================================="
+ cat $DEVIATION_FILE
+ fi
+ echo ""
+ echo "Timer measurement in the test script"
+ echo "===================================="
+ column -t -s $'\t' $TIMER_MEASUREMENTS
+ echo ""
+
echo "++++ Number of tests: "$RES_TEST
echo "++++ Number of passed tests: "$RES_PASS
echo "++++ Number of failed tests: "$RES_FAIL
echo ""
echo "++++ Number of failed configs: "$RES_CONF_FAIL
+ echo ""
+ echo "++++ Number of test case deviations: "$RES_DEVIATION
+ echo ""
echo "------------------------------------- Test case complete ---------------------------------"
echo "-------------------------------------------------------------------------------------------------"
echo ""
###### Functions for start, configuring, stoping, cleaning etc ######
#####################################################################
+# Start timer for time measurement
+# args - (any args will be printed though)
+start_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ TC_TIMER=$SECONDS
+ echo " Timer started"
+}
+
+# Print the value of the time (in seconds)
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+}
+
+# Print the value of the time (in seconds) and reset the timer
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_and_reset_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))" seconds"
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+ TC_TIMER=$SECONDS
+ echo " Timer reset"
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+
+}
+# Print info about a deviations from intended tests
+# Each deviation counted is also printed in the testreport
+# args <deviation message to print>
+deviation() {
+ echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <deviation message to print>" $@
+ exit 1
+ fi
+ ((RES_DEVIATION++))
+ echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
+ echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
+ echo ""
+}
# Stop and remove all containers
# args: -
"Control Panel " $CONTROL_PANEL_APP_NAME\
"SDNC A1 Controller " $SDNC_APP_NAME\
"SDNC DB " $SDNC_DB_APP_NAME\
+ "SDNC ONAP A1 Adapter " $SDNC_ONAP_APP_NAME\
+ "SDNC DB " $SDNC_ONAP_DB_APP_NAME\
"CBS " $CBS_APP_NAME\
"Consul " $CONSUL_APP_NAME)
for((w=${#CONTR}; w<$nw; w=w+1)); do
CONTR="$CONTR "
done
- echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}\033[0K\r"
+ echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
- echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}\033[0K\r"
+ echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
docker rm $(docker ps -qa --filter name=${CONTR}) &> /dev/null
echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
done
start=$SECONDS
duration=$((SECONDS-start))
while [ $duration -lt $1 ]; do
- echo -ne " Slept for ${duration} seconds\033[0K\r"
+ echo -ne " Slept for ${duration} seconds${SAMELINE}"
sleep 1
duration=$((SECONDS-start))
done
- echo -ne " Slept for ${duration} seconds\033[0K\r"
+ echo -ne " Slept for ${duration} seconds${SAMELINE}"
echo ""
}
# (Not for test scripts)
__find_sim_port() {
name=$1" " #Space appended to prevent matching 10 if 1 is desired....
- cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
- res=$(eval $cmdstr)
+ cmdstr="docker inspect --format='{{(index (index .NetworkSettings.Ports \"$RIC_SIM_PORT/tcp\") 0).HostPort}}' ${name}"
+ res=$(eval $cmdstr)
if [[ "$res" =~ ^[0-9]+$ ]]; then
echo $res
else
# Function to create the docker network for the test
# Not to be called from the test script itself.
__create_docker_network() {
- tmp=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
+ tmp=$(docker network ls --format={{.Name}} --filter name=$DOCKER_SIM_NWNAME)
if [ $? -ne 0 ]; then
echo -e $RED" Could not check if docker network $DOCKER_SIM_NWNAME exists"$ERED
return 1
fi
- if [ -z tmp ]; then
+ if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
echo -e "Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
docker network create $DOCKER_SIM_NWNAME
if [ $? -ne 0 ]; then
}
# Check if container is started by calling url on localhost using a port, expects response code 2XX
-# args: <container-name> <port> <url>
+# args: <container-name> <port> <url> https|https
# Not to be called from the test script itself.
__check_container_start() {
- if [ $# -ne 3 ]; then
+ paramError=0
+ if [ $# -ne 4 ]; then
+ paramError=1
+ elif [ $4 != "http" ] && [ $4 != "https" ]; then
+ paramError=1
+ fi
+ if [ $paramError -ne 0 ]; then
((RES_CONF_FAIL++))
- __print_err "need 3 args, <container-name> <port> <url>" $@
+ __print_err "need 3 args, <container-name> <port> <url> https|https" $@
return 1
fi
- echo -ne " Container $BOLD$1$EBOLD starting\033[0K\r"
+ echo -ne " Container $BOLD$1$EBOLD starting${SAMELINE}"
appname=$1
localport=$2
url=$3
- pa_started=false
- for i in {1..10}; do
- if [ $(docker inspect --format '{{ .State.Running }}' $appname) ]; then
- echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
- pa_started=true
- break
- else
- sleep $i
- fi
- done
- if ! [ $pa_started ]; then
- ((RES_CONF_FAIL++))
- echo ""
- echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
- return 1
- fi
- if [ $localport -eq 0 ]; then
- while [ $localport -eq 0 ]; do
- echo -ne " Waiting for container ${appname} to publish its ports...\033[0K\r"
- localport=$(__find_sim_port $appname)
- sleep 1
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....\033[0K\r"
+ if [[ $appname != "STANDALONE_"* ]] ; then
+ app_started=0
+ for i in {1..10}; do
+ if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
+ echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
+ app_started=1
+ break
+ else
+ sleep $i
+ fi
done
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
- echo ""
+ if [ $app_started -eq 0 ]; then
+ ((RES_CONF_FAIL++))
+ echo ""
+ echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
+ return 1
+ fi
+ if [ $localport -eq 0 ]; then
+ while [ $localport -eq 0 ]; do
+ echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
+ localport=$(__find_sim_port $appname)
+ sleep 1
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ done
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
+ echo ""
+ fi
fi
pa_st=false
- echo -ne " Waiting for container ${appname} service status...\033[0K\r"
+ echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
for i in {1..20}; do
- result="$(__do_curl $LOCALHOST${localport}${url})"
+ if [ $4 == "https" ]; then
+ result="$(__do_curl "-k https://localhost:"${localport}${url})"
+ else
+ result="$(__do_curl $LOCALHOST${localport}${url})"
+ fi
if [ $? -eq 0 ]; then
if [ ${#result} -gt 15 ]; then
#If response is too long, truncate
result="...response text too long, omitted"
fi
- echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result\033[0K\r"
+ echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN"
pa_st=true
break
else
#echo " Retrying in $i seconds"
- echo -ne " Waiting for container ${appname} service status...retrying in $i seconds\033[0K\r"
+ echo -ne " Waiting for container ${appname} service status...retrying in $i seconds${SAMELINE}"
sleep $i
fi
done
__start_container() {
variableArgCount=$(($#-2))
- if [ $# -lt 5 ] && [ [ $(($variableArgCount%3)) -ne 0 ]; then
+ if [ $# -lt 6 ] && [ [ $(($variableArgCount%4)) -ne 0 ]; then
((RES_CONF_FAIL++))
- __print_err "need 5 or more args, <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> [<app-name> <port-number> <alive-url>]*" $@
+ __print_err "need 6 or more args, <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> http|https [<app-name> <port-number> <alive-url> http|https ]*" $@
exit 1
fi
cd $1
if [ "$2" == "NODOCKERARGS" ]; then
- docker-compose up -d &> /dev/null
+ docker-compose up -d &> .dockererr
+ if [ $? -ne 0 ]; then
+ echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
+ cat .dockererr
+ fi
+ elif [ "$2" == "STANDALONE" ]; then
+ echo "Skipping docker-compose"
else
- docker-compose up -d $2 &> /dev/null
+ docker-compose up -d $2 &> .dockererr
+ if [ $? -ne 0 ]; then
+ echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
+ cat .dockererr
+ fi
+ fi
+ app_prefix=""
+ if [ "$2" == "STANDALONE" ]; then
+ app_prefix="STANDALONE_"
fi
-
shift; shift;
cntr=0
while [ $cntr -lt $variableArgCount ]; do
- app=$1; shift;
+ app=$app_prefix$1; shift;
port=$1; shift;
url=$1; shift;
- let cntr=cntr+3
+ httpx=$1; shift;
+ let cntr=cntr+4
- __check_container_start "$app" "$port" "$url"
+ __check_container_start "$app" "$port" "$url" $httpx
done
cd $curdir
return 1
fi
body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
+ echo $body > ".output"$1
if [ $? -ne 0 ]; then
echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
targetJson=$(< $1)
targetJson="{\"config\":"$targetJson"}"
echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python ../common/compare_json.py "$targetJson" "$body")
+ res=$(python3 ../common/compare_json.py "$targetJson" "$body")
if [ $res -ne 0 ]; then
echo -e $RED" FAIL - policy json config read from consul/cbs is not equal to the intended json config...." $ERED
((RES_CONF_FAIL++))
}
# Function to perpare the consul configuration according to the current simulator configuration
-# args: SDNC|NOSDNC <output-file>
+# args: SDNC|SDNC_ONAP|NOSDNC <output-file>
# (Function for test scripts)
prepare_consul_config() {
echo -e $BOLD"Prepare Consul config"$EBOLD
if [ $# != 2 ]; then
((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|NOSDNC <output-file>" $@
+ __print_err "need two args, SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
exit 1
fi
if [ $1 == "SDNC" ]; then
echo -e " Config$BOLD including SDNC$EBOLD configuration"
+ elif [ $1 == "SDNC_ONAP" ]; then
+ echo -e " Config$BOLD including SDNC ONAP$EBOLD configuration"
elif [ $1 == "NOSDNC" ]; then
- echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
+ echo -e " Config$BOLD excluding SDNC or SDNC ONAP$EBOLD configuration"
else
((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|NOSDNC <output-file>" $@
+ __print_err "need two args, SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
exit 1
fi
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_APP_NAME:$SDNC_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n ],"
fi
+ if [ $1 == "SDNC_ONAP" ]; then
+ config_json=$config_json"\n \"controller\": ["
+ config_json=$config_json"\n {"
+ config_json=$config_json"\n \"name\": \"$SDNC_ONAP_APP_NAME\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"http://localhost:$SDNC_ONAP_EXTERNAL_PORT\","
+ fi
+ config_json=$config_json"\n \"userName\": \"$SDNC_ONAP_USER\","
+ config_json=$config_json"\n \"password\": \"$SDNC_ONAP_PWD\""
+ config_json=$config_json"\n }"
+ config_json=$config_json"\n ],"
+ fi
config_json=$config_json"\n \"streams_publishes\": {"
config_json=$config_json"\n \"dmaap_publisher\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-WRITE\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
config_json=$config_json"\n \"dmaap_subscriber\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-READ/users/policy-agent\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
fi
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$ric\","
- config_json=$config_json"\n \"baseUrl\": \"http://$ric:$RIC_SIM_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
+ fi
if [ $1 == "SDNC" ]; then
config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
+ elif [ $1 == "SDNC_ONAP" ]; then
+ config_json=$config_json"\n \"controller\": \"$SDNC_ONAP_APP_NAME\","
fi
config_json=$config_json"\n \"managedElementIds\": ["
config_json=$config_json"\n \"me1_$ric\","
echo -e $BOLD"Starting Consul and CBS"$EBOLD
- __start_container consul_cbs NODOCKERARGS "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" \
- "$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck"
+ __start_container consul_cbs NODOCKERARGS "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" "http" \
+ "$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck" "http"
}
###########################
### RIC Simulator functions
###########################
+use_simulator_http() {
+ echo -e "Using unsecure $BOLD http $EBOLD towards the simulators"
+ export RIC_SIM_HTTPX="http"
+ export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
+ export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
+ echo ""
+}
+
+use_simulator_https() {
+ echo -e "Using secure $BOLD https $EBOLD towards the simulators"
+ export RIC_SIM_HTTPX="https"
+ export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
+ export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
+ echo ""
+}
+
# Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
# args: ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
# (Function for test scripts)
while [ $cntr -le $2 ]; do
app=$1"_"$cntr
port=0
- app_data="$app_data $app $port /"
+ app_data="$app_data $app $port / "$RIC_SIM_HTTPX
let cntr=cntr+1
done
-
__start_container ric "$docker_args" $app_data
}
echo -e $BOLD"Starting Control Panel"$EBOLD
- __start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/"
+ __start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/" "http"
}
echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
- __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT "/apidoc/explorer"
+ __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
+
+}
+
+use_sdnc_http() {
+ echo -e $BOLD"Using http between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="http"
+ export SDNC_PORT=$SDNC_INTERNAL_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
+ echo ""
+}
+
+use_sdnc_https() {
+ echo -e $BOLD"Using https between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="https"
+ export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
+ echo ""
+}
+
+#######################
+### SDNC ONAP functions
+#######################
+
+# Start the SDNC ONAP A1 Adapter
+# args: -
+# (Function for test scripts)
+start_sdnc_onap() {
+
+ echo -e $BOLD"Starting SDNC ONAP A1 Adapter"$EBOLD
+
+ __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT $SDNC_ONAP_ALIVE_URL "http"
+
+}
+
+# Configure the SDNC ONAP A1 Adapter
+# args: -
+# (Function for test scripts)
+config_sdnc_onap() {
+
+ echo -e $BOLD"Configuring SDNC ONAP A1 Adapter"$EBOLD
+
+ LOCALFILE=".sdnc_onap.prop"
+ REMOTEFILE="/tmp/.sdnc_onap.prop"
+
+ docker cp $SDNC_ONAP_APP_NAME:$SDNC_ONAP_PROPERTIES_FILE $LOCALFILE
+ if [ $? -ne 0 ]; then
+ echo -e $RED"Could not copy $SDNC_ONAP_PROPERTIES_FILE from $SDNC_ONAP_APP_NAME container"$ERED
+ exit 1
+ fi
+
+
+ #Config of the prop file shall be inserted here
+
+ #Copy file to /tmp and then to final destination, a trick to get correct permission of the file.
+
+ docker cp $LOCALFILE $SDNC_ONAP_APP_NAME:$REMOTEFILE
+ if [ $? -ne 0 ]; then
+ echo -e $RED"Could not copy local $LOCALFILE to $REMOTEFILE in $SDNC_ONAP_APP_NAME container"$ERED
+ exit 1
+ fi
+ docker exec -it $SDNC_ONAP_APP_NAME cp $REMOTEFILE $SDNC_ONAP_PROPERTIES_FILE
+ if [ $? -ne 0 ]; then
+ echo -e $RED"Could not copy $REMOTEFILE to $SDNC_ONAP_PROPERTIES_FILE in $SDNC_ONAP_APP_NAME container"$ERED
+ exit 1
+ fi
}
#####################
start_mr() {
echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
+ export MR_CERT_MOUNT_DIR="./cert"
+ __start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
+}
- __start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/"
+use_mr_http() {
+ echo -e $BOLD"Using http between agent and MR"$EBOLD
+ export MR_HTTPX="http"
+ export MR_PORT=$MR_INTERNAL_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
+ echo ""
+}
+use_mr_https() {
+ echo -e $BOLD"Using https between agent and MR"$EBOLD
+ export MR_HTTPX="https"
+ export MR_PORT=$MR_INTERNAL_SECURE_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
+ echo ""
}
+
################
### CR functions
################
echo -e $BOLD"Starting Callback Receiver"$EBOLD
- __start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/"
+ __start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/" "http"
}
### Policy Agents functions
###########################
-# Start the policy agwent
+# Use an agent on the local machine instead of container
+use_agent_stand_alone() {
+ AGENT_STAND_ALONE=1
+}
+
+# Start the policy agent
# args: -
# (Function for test scripts)
start_policy_agent() {
echo -e $BOLD"Starting Policy Agent"$EBOLD
- __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status"
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ else
+ echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
+ echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
+ echo -e $RED"application.yaml"$ERED
+ echo -e $RED"The application jar may need to be built beforefor continuing"$ERED
+ echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
+
+ read -p "<press any key to continue>"
+ __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ fi
}
# All calls to the agent will be directed to the agent REST interface from now on
# args: -
# (Function for test scripts)
-use_agent_rest() {
- echo -e $BOLD"Using agent REST interface"$EBOLD
+use_agent_rest_http() {
+ echo -e $BOLD"Using agent REST interface with http"$EBOLD
export ADAPTER=$RESTBASE
echo ""
}
+# All calls to the agent will be directed to the agent REST interface from now on
+# args: -
+# (Function for test scripts)
+use_agent_rest_https() {
+ echo -e $BOLD"Using agent REST interface with https"$EBOLD
+ export ADAPTER=$RESTBASE_SECURE
+ echo ""
+ return 0
+}
+
# All calls to the agent will be directed to the agent dmaap interface from now on
# args: -
# (Function for test scripts)
use_agent_dmaap() {
- echo -e $BOLD"Using agent DMAAP interface"$EBOLD
+ echo -e $BOLD"Agent using DMAAP interface"$EBOLD
export ADAPTER=$DMAAPBASE
echo ""
-
+ return 0
}
+
# Turn on debug level tracing in the agent
# args: -
# (Function for test scripts)
__print_err "could not set debug mode" $@
return 1
fi
- return 0
echo ""
+ return 0
}
# Perform curl retries when making direct call to the agent for the specified http response codes
echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
AGENT_RETRY_CODES=$@
echo ""
+ return
}
#################
__print_err "need one arg, <file-prefix>" $@
exit 1
fi
- echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1
+ echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1$EBOLD
docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
- docker exec -it $SDNC_APP_NAME cat /opt/opendaylight/data/log/karaf.log > $TESTLOGS/$ATC/$1_karaf.log 2>&1
+ docker exec -it $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
+
+ docker exec -it $SDNC_ONAP_APP_NAME cat $SDNC_ONAP_KARAF_LOG > $TESTLOGS/$ATC/$1_SDNC_ONAP_karaf.log 2>&1
rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
for ric in $rics; do
fi
#echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} within ${6} seconds ----"
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"
+ echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
((RES_TEST++))
start=$SECONDS
ctr=0
result="$(__do_curl $2$path)"
retcode=$?
echo "$result" > .tmp.curl.json
- result=$(python ../common/count_json_elements.py ".tmp.curl.json")
+ result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
fi
duration=$((SECONDS-start))
- echo -ne " Result=${result} after ${duration} seconds\033[0K\r"
+ echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
let ctr=ctr+1
if [ $retcode -ne 0 ]; then
if [ $duration -gt $6 ]; then
fi
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
- echo -e " Result=${result} after ${duration} seconds\033[0K\r"
+ echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
#echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds ----"
return
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
- echo -e " Result=${result} after ${duration} seconds\033[0K\r"
+ echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
#echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
- echo -e " Result=${result} after ${duration} seconds\033[0K\r"
+ echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
#echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
- echo -e " Result=${result} after ${duration} seconds\033[0K\r"
+ echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
#echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
result="$(__do_curl $2$path)"
retcode=$?
echo "$result" > .tmp.curl.json
- result=$(python ../common/count_json_elements.py ".tmp.curl.json")
+ result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
fi
if [ $retcode -ne 0 ]; then
((RES_FAIL++))
# (Function for test scripts)
mr_greater() {
if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
+ __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 ">" $2 $3
else
((RES_CONF_FAIL++))
__print_err "Wrong args to mr_greater, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
fi
echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD
}
-
-