exit 1
fi
+tmp=$(which docker-compose)
+if [ $? -ne 0 ] || [ -z tmp ]; then
+ echo -e $RED"docker-compose is required to run the test environment, pls install"$ERED
+ exit 1
+fi
+
# Just resetting any previous echo formatting...
-echo -ne $EBOLD$ERED$EGREEN
+echo -ne $EBOLD
# source test environment variables
. ../common/test_env.sh
G2_COUNT=0
G3_COUNT=0
-# Var to switch between http and https. Extra curl flag needed for https
+# Vars to switch between http and https. Extra curl flag needed for https
export RIC_SIM_HTTPX="http"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
-export RIC_SIM_CERT_MOUNT_DIR="./fakedir" #Fake dir so that the sim container does not find any cert
+export RIC_SIM_CERT_MOUNT_DIR="./cert"
+
+export MR_HTTPX="http"
+export MR_PORT=$MR_INTERNAL_PORT
+export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
+
+export SDNC_HTTPX="http"
+export SDNC_PORT=$SDNC_INTERNAL_PORT
+export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
#Localhost constant
LOCALHOST="http://localhost:"
# Make curl retries for http response codes set in this env var, space separated list of codes
AGENT_RETRY_CODES=""
+# Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
+AGENT_STAND_ALONE=0
+
# Var to hold 'auto' in case containers shall be stopped when test case ends
AUTO_CLEAN=""
+# Var to hold the app names to use local image for when running 'remote' or 'remote-remove'
+USE_LOCAL_IMAGES=""
+
+# Use this var (STOP_AT_ERROR=1 in the test script) for debugging/trouble shooting to take all logs and exit at first FAIL test case
+STOP_AT_ERROR=0
+
# Set a description string for the test case
if [ -z "$TC_ONELINE_DESCR" ]; then
TC_ONELINE_DESCR="<no-description>"
HTTPLOG=$PWD"/.httplog_"$ATC".txt"
echo "" > $HTTPLOG
+#Create result file (containing '1' for error) for this test case
+#Will be replaced with a file containing '0' if script is ok
+
+echo "1" > "$PWD/.result$ATC.txt"
+
# Create a log dir for the test case
mkdir -p $TESTLOGS/$ATC
RES_PASS=0
RES_FAIL=0
RES_CONF_FAIL=0
+RES_DEVIATION=0
+
+#File to keep deviation messages
+DEVIATION_FILE=".tmp_deviations"
+rm $DEVIATION_FILE &> /dev/null
#Var for measuring execution time
TCTEST_START=$SECONDS
+#File to save timer measurement results
+TIMER_MEASUREMENTS=".timer_measurement.txt"
+echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
+
+
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case: "$ATC
echo "----------------------------------- Started: "$(date)
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case setup -----------------------------------"
+START_ARG=$1
+paramerror=0
+if [ $# -lt 1 ]; then
+ paramerror=1
+fi
+if [ $paramerror -eq 0 ]; then
+ if [ "$1" != "remote" ] && [ "$1" != "remote-remove" ] && [ "$1" != "local" ]; then
+ paramerror=1
+ else
+ shift;
+ fi
+fi
+if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "auto-clean" ]; then
+ AUTO_CLEAN="auto"
+ shift;
+ fi
+fi
+if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--stop-at-error" ]; then
+ STOP_AT_ERROR=1
+ shift;
+ fi
+fi
+if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--use-local-image" ]; then
+ USE_LOCAL_IMAGES=${@:2}
+ while [ $# -gt 0 ]; do
+ shift;
+ done
+ fi
+fi
+
+if [ $paramerror -eq 0 ] && [ $# -gt 0 ]; then
+ paramerror=1
+fi
+
+if [ $paramerror -eq 1 ]; then
+ echo -e $RED"Expected arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--use-local-image <app-nam> [<app-name>]*]"$ERED
+ exit 1
+fi
+
echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
#Temp var to check for image variable name errors
#echo " Configured image for ${1} (script start arg=${2}): "$image":"$tag
}
+
+#Check if app local image shall override remote image
+__check_image_local_override() {
+ for im in $USE_LOCAL_IMAGES; do
+ if [ "$1" == "$im" ]; then
+ return 1
+ fi
+ done
+ return 0
+}
+
+#Check if app uses image excluded from this test run
+__check_excluded_image() {
+ for im in $EXCLUDED_IMAGES; do
+ if [ "$1" == "$im" ]; then
+ return 1
+ fi
+ done
+ return 0
+}
+
# Check that image env setting are available
echo ""
-if [ $# -lt 1 ] || [ $# -gt 2 ]; then
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
- exit 1
-elif [ $1 == "local" ]; then
+
+if [ $START_ARG == "local" ]; then
#Local agent image
- __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG"
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG"
#Local Control Panel image
- __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG"
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG"
#Local SNDC image
- __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG"
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG"
#Local ric sim image
- __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG"
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG"
-elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
+elif [ $START_ARG == "remote" ] || [ $START_ARG == "remote-remove" ]; then
- #Remote agent image
- __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'PA'
+ if [ $? -eq 0 ]; then
+ #Remote agent image
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG"
+ else
+ #Local agent image
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG"
+ fi
- #Remote Control Panel image
- __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'CP'
+ if [ $? -eq 0 ]; then
+ #Remote Control Panel image
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG"
+ else
+ #Local Control Panel image
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG"
+ fi
- #Remote SDNC image
- __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'SDNC'
+ if [ $? -eq 0 ]; then
+ #Remote SDNC image
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG"
+ else
+ #Local SNDC image
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG"
+ fi
- #Remote ric sim image
- __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'RICSIM'
+ if [ $? -eq 0 ]; then
+ #Remote ric sim image
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG"
+ else
+ #Local ric sim image
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG"
+ fi
else
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
+ #Should never get here....
+ echo "Unknow args: "$@
exit 1
fi
-if [ $# -eq 2 ]; then
- if [ $2 == "auto-clean" ]; then
- echo "Stting automatic cleaning of container when test case ends"
- AUTO_CLEAN="auto"
- else
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
- exit 1
- fi
-fi
# These images are not built as part of this project official images, just check that env vars are set correctly
-__check_image_var " Message Router" $1 "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG"
-__check_image_var " Callback Receiver" $1 "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG"
-__check_image_var " Consul" $1 "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG"
-__check_image_var " CBS" $1 "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC DB" $1 "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC ONAP A1 Adapter" $1 "SDNC_ONAP_A1_ADAPTER_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC ONAP DB" $1 "SDNC_ONAP_DB_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE_TAG"
+__check_image_var " Message Router" $START_ARG "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG"
+__check_image_var " Callback Receiver" $START_ARG "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG"
+__check_image_var " Consul" $START_ARG "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG"
+__check_image_var " CBS" $START_ARG "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG"
+__check_image_var " SDNC DB" $START_ARG "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG"
+__check_excluded_image 'SDNC_ONAP'
+if [ $? -eq 0 ]; then
+ __check_image_var " SDNC ONAP A1 Adapter" $START_ARG "SDNC_ONAP_A1_ADAPTER_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE_TAG"
+ __check_image_var " SDNC ONAP DB" $START_ARG "SDNC_ONAP_DB_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE_TAG"
+fi
#Errors in image setting - exit
if [ $IMAGE_ERR -ne 0 ]; then
fi
#Print a tables of the image settings
-echo -e $BOLD"Images configured for start arg: "$1 $EBOLD
+echo -e $BOLD"Images configured for start arg: "$START $EBOLD
column -t -s $'\t' $image_list_file
echo ""
echo -e $BOLD"Pulling configured images, if needed"$EBOLD
-app="Policy Agent"; __check_and_pull_image $1 "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
-app="Non-RT RIC Control Panel"; __check_and_pull_image $1 "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
-app="SDNC A1 Controller"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
-app="Near-RT RIC Simulator"; __check_and_pull_image $1 "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
+START_ARG_MOD=$START_ARG
+__check_image_local_override 'PA'
+if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+fi
+app="Policy Agent"; __check_and_pull_image $START_ARG_MOD "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
-app="Consul"; __check_and_pull_image $1 "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
-app="CBS"; __check_and_pull_image $1 "$app" $CBS_APP_NAME $CBS_IMAGE
-app="SDNC DB"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
-app="SDNC ONAP A1 Adapter"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
-app="SDNC ONAP DB"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
+START_ARG_MOD=$START_ARG
+__check_image_local_override 'CP'
+if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+fi
+app="Non-RT RIC Control Panel"; __check_and_pull_image $START_ARG_MOD "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
+START_ARG_MOD=$START_ARG
+__check_image_local_override 'RICSIM'
+if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+fi
+app="Near-RT RIC Simulator"; __check_and_pull_image $START_ARG_MOD "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
+
+app="Consul"; __check_and_pull_image $START_ARG "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
+app="CBS"; __check_and_pull_image $START_ARG "$app" $CBS_APP_NAME $CBS_IMAGE
+__check_excluded_image 'SDNC'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'SDNC'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="SDNC A1 Controller"; __check_and_pull_image $START_ARG_MOD "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
+ app="SDNC DB"; __check_and_pull_image $START_ARG "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
+else
+ echo -e $YELLOW" Excluding SDNC image and related DB image from image check/pull"$EYELLOW
+fi
+__check_excluded_image 'SDNC_ONAP'
+if [ $? -eq 0 ]; then
+ app="SDNC ONAP A1 Adapter"; __check_and_pull_image $START_ARG "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
+ app="SDNC ONAP DB"; __check_and_pull_image $START_ARG "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
+else
+ echo -e $YELLOW" Excluding ONAP SDNC image and related DB image from image check/pull"$EYELLOW
+fi
# MR stub image not checked, will be built by this script - only local image
# CR stub image not checked, will be built by this script - only local image
echo ""
echo "#################################################################################################"
echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
+ echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
echo "#################################################################################################"
echo ""
exit 1
echo -e " Application\tRepository\tTag\tCreated Since\tSize" > $docker_tmp_file
echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >> $docker_tmp_file
echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >> $docker_tmp_file
echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >> $docker_tmp_file
echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >> $docker_tmp_file
echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC ONAP A1 Adapter\t$(docker images --format $format_string $SDNC_ONAP_A1_ADAPTER_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC ONAP DB\t$(docker images --format $format_string $SDNC_ONAP_DB_IMAGE)" >> $docker_tmp_file
+__check_excluded_image 'SDNC'
+if [ $? -eq 0 ]; then
+ echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
+ echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
+fi
+__check_excluded_image 'SDNC_ONAP'
+if [ $? -eq 0 ]; then
+ echo -e " SDNC ONAP A1 Adapter\t$(docker images --format $format_string $SDNC_ONAP_A1_ADAPTER_IMAGE)" >> $docker_tmp_file
+ echo -e " SDNC ONAP DB\t$(docker images --format $format_string $SDNC_ONAP_DB_IMAGE)" >> $docker_tmp_file
+fi
column -t -s $'\t' $docker_tmp_file
echo ""
+ if [ $RES_DEVIATION -gt 0 ]; then
+ echo "Test case deviations"
+ echo "===================================="
+ cat $DEVIATION_FILE
+ fi
+ echo ""
+ echo "Timer measurement in the test script"
+ echo "===================================="
+ column -t -s $'\t' $TIMER_MEASUREMENTS
+ echo ""
+
total=$((RES_PASS+RES_FAIL))
if [ $RES_TEST -eq 0 ]; then
echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
if [ -f .tmp_tcsuite_pass ]; then
echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
fi
+ #Create file with OK exit code
+ echo "0" > "$PWD/.result$ATC.txt"
else
echo -e "One or more tests with status \033[31m\033[1mFAIL\033[0m "
echo -e "\033[31m\033[1m ___ _ ___ _ \033[0m"
echo "++++ Number of failed tests: "$RES_FAIL
echo ""
echo "++++ Number of failed configs: "$RES_CONF_FAIL
+ echo ""
+ echo "++++ Number of test case deviations: "$RES_DEVIATION
+ echo ""
echo "------------------------------------- Test case complete ---------------------------------"
echo "-------------------------------------------------------------------------------------------------"
echo ""
###### Functions for start, configuring, stoping, cleaning etc ######
#####################################################################
+# Start timer for time measurement
+# args - (any args will be printed though)
+start_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ TC_TIMER=$SECONDS
+ echo " Timer started"
+}
+
+# Print the value of the time (in seconds)
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+}
+
+# Print the value of the time (in seconds) and reset the timer
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_and_reset_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))" seconds"
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+ TC_TIMER=$SECONDS
+ echo " Timer reset"
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+
+}
+# Print info about a deviations from intended tests
+# Each deviation counted is also printed in the testreport
+# args <deviation message to print>
+deviation() {
+ echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <deviation message to print>" $@
+ exit 1
+ fi
+ ((RES_DEVIATION++))
+ echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
+ echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
+ echo ""
+}
+
+# Stop at first FAIL test case and take all logs - only for debugging/trouble shooting
+__check_stop_at_error() {
+ if [ $STOP_AT_ERROR -eq 1 ]; then
+ echo -e $RED"Test script configured to stop at first FAIL, taking all logs and stops"$ERED
+ store_logs "STOP_AT_ERROR"
+ exit 1
+ fi
+ return 0
+}
# Stop and remove all containers
# args: -
echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
- docker rm $(docker ps -qa --filter name=${CONTR}) &> /dev/null
+ docker rm --force $(docker ps -qa --filter name=${CONTR}) &> /dev/null
echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
done
echo ""
+
+ echo -e $BOLD" Removing docker network"$EBOLD
+ TMP=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
+ if [ "$TMP" == $DOCKER_SIM_NWNAME ]; then
+ docker network rm $DOCKER_SIM_NWNAME
+ if [ $? -ne 0 ]; then
+ echo -e $RED" Cannot remove docker network. Manually remove or disconnect containers from $DOCKER_SIM_NWNAME"$ERED
+ exit 1
+ fi
+ fi
+
+ echo -e $BOLD" Removing all unused docker neworks"$EBOLD
+ docker network prune --force #&> /dev/null
+
+ echo -e $BOLD" Removing all unused docker volumes"$EBOLD
+ docker volume prune --force #&> /dev/null
+
+ echo -e $BOLD" Removing all dangling/untagged docker images"$EBOLD
+ docker rmi --force $(docker images -q -f dangling=true) &> /dev/null
+ echo ""
}
# Function stop and remove all container in the end of the test script, if the arg 'auto-clean' is given at test script start
}
# Function to sleep a test case for a numner of seconds. Prints the optional text args as info
-# args: <sleep-time-in-sec> [any-text-in-quoteds-to-printed]
+# args: <sleep-time-in-sec> [any-text-in-quotes-to-be-printed]
# (Function for test scripts)
sleep_wait() {
# (Not for test scripts)
__find_sim_port() {
name=$1" " #Space appended to prevent matching 10 if 1 is desired....
- cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
- res=$(eval $cmdstr)
+ cmdstr="docker inspect --format='{{(index (index .NetworkSettings.Ports \"$RIC_SIM_PORT/tcp\") 0).HostPort}}' ${name}"
+ res=$(eval $cmdstr)
if [[ "$res" =~ ^[0-9]+$ ]]; then
echo $res
else
appname=$1
localport=$2
url=$3
- app_started=0
- for i in {1..10}; do
- if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
- echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
- app_started=1
- break
- else
- sleep $i
- fi
- done
- if [ $app_started -eq 0 ]; then
- ((RES_CONF_FAIL++))
- echo ""
- echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
- return 1
- fi
- if [ $localport -eq 0 ]; then
- while [ $localport -eq 0 ]; do
- echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
- localport=$(__find_sim_port $appname)
- sleep 1
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ if [[ $appname != "STANDALONE_"* ]] ; then
+ app_started=0
+ for i in {1..10}; do
+ if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
+ echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
+ app_started=1
+ break
+ else
+ sleep $i
+ fi
done
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
- echo ""
+ if [ $app_started -eq 0 ]; then
+ ((RES_CONF_FAIL++))
+ echo ""
+ echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
+ return 1
+ fi
+ if [ $localport -eq 0 ]; then
+ while [ $localport -eq 0 ]; do
+ echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
+ localport=$(__find_sim_port $appname)
+ sleep 1
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ done
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
+ echo ""
+ fi
fi
pa_st=false
echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
- for i in {1..20}; do
+ TSTART=$SECONDS
+ for i in {1..50}; do
if [ $4 == "https" ]; then
result="$(__do_curl "-k https://localhost:"${localport}${url})"
else
result="...response text too long, omitted"
fi
echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
- echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN"
+ echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN after $(($SECONDS-$TSTART)) seconds"
pa_st=true
break
else
- #echo " Retrying in $i seconds"
- echo -ne " Waiting for container ${appname} service status...retrying in $i seconds${SAMELINE}"
- sleep $i
+ TS_TMP=$SECONDS
+ while [ $(($TS_TMP+$i)) -gt $SECONDS ]; do
+ echo -ne " Waiting for container ${appname} service status...retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
+ sleep 1
+ done
fi
done
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
fi
+ elif [ "$2" == "STANDALONE" ]; then
+ echo "Skipping docker-compose"
else
docker-compose up -d $2 &> .dockererr
if [ $? -ne 0 ]; then
cat .dockererr
fi
fi
-
+ app_prefix=""
+ if [ "$2" == "STANDALONE" ]; then
+ app_prefix="STANDALONE_"
+ fi
shift; shift;
cntr=0
while [ $cntr -lt $variableArgCount ]; do
- app=$1; shift;
+ app=$app_prefix$1; shift;
port=$1; shift;
url=$1; shift;
httpx=$1; shift;
return 1
fi
body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
+ echo $body > ".output"$1
if [ $? -ne 0 ]; then
echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_APP_NAME:$SDNC_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_ONAP_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"http://localhost:$SDNC_ONAP_EXTERNAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_ONAP_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_ONAP_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n \"dmaap_publisher\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-WRITE\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
config_json=$config_json"\n \"dmaap_subscriber\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-READ/users/policy-agent\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
fi
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$ric\","
- config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
+ fi
if [ $1 == "SDNC" ]; then
config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
elif [ $1 == "SDNC_ONAP" ]; then
export RIC_SIM_HTTPX="http"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
- export RIC_SIM_CERT_MOUNT_DIR="./fakedir" #Fake dir so that the sim container does not find any cert
echo ""
}
export RIC_SIM_HTTPX="https"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
- export RIC_SIM_CERT_MOUNT_DIR="./cert"
echo ""
}
echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
- __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT "/apidoc/explorer" "http"
+ __check_excluded_image 'SDNC'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The image for SDNC and the related DB has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"SDNC will not be started"$ERED
+ exit
+ fi
+
+ __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
}
+use_sdnc_http() {
+ echo -e $BOLD"Using http between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="http"
+ export SDNC_PORT=$SDNC_INTERNAL_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
+ echo ""
+}
+
+use_sdnc_https() {
+ echo -e $BOLD"Using https between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="https"
+ export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
+ echo ""
+}
+
#######################
### SDNC ONAP functions
#######################
echo -e $BOLD"Starting SDNC ONAP A1 Adapter"$EBOLD
- __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT "/apidoc/explorer" "http"
+ __check_excluded_image 'SDNC_ONAP'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The image for SDNC ONAP and the related DB has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"SDNC ONAP will not be started"$ERED
+ exit
+ fi
+
+ __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT $SDNC_ONAP_ALIVE_URL "http"
}
exit 1
fi
+
#Config of the prop file shall be inserted here
#Copy file to /tmp and then to final destination, a trick to get correct permission of the file.
echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
export MR_CERT_MOUNT_DIR="./cert"
__start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
+}
+
+use_mr_http() {
+ echo -e $BOLD"Using http between agent and MR"$EBOLD
+ export MR_HTTPX="http"
+ export MR_PORT=$MR_INTERNAL_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
+ echo ""
+}
+use_mr_https() {
+ echo -e $BOLD"Using https between agent and MR"$EBOLD
+ export MR_HTTPX="https"
+ export MR_PORT=$MR_INTERNAL_SECURE_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
+ echo ""
}
+
################
### CR functions
################
### Policy Agents functions
###########################
-# Start the policy agwent
+# Use an agent on the local machine instead of container
+use_agent_stand_alone() {
+ AGENT_STAND_ALONE=1
+}
+
+# Start the policy agent
# args: -
# (Function for test scripts)
start_policy_agent() {
echo -e $BOLD"Starting Policy Agent"$EBOLD
- __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ else
+ echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
+ echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
+ echo -e $RED"application.yaml"$ERED
+ echo -e $RED"The application jar may need to be built beforefor continuing"$ERED
+ echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
+
+ read -p "<press any key to continue>"
+ __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ fi
}
echo -e $BOLD"Using agent REST interface with https"$EBOLD
export ADAPTER=$RESTBASE_SECURE
echo ""
+ return 0
}
# All calls to the agent will be directed to the agent dmaap interface from now on
# args: -
# (Function for test scripts)
use_agent_dmaap() {
- echo -e $BOLD"Using agent DMAAP interface"$EBOLD
+ echo -e $BOLD"Agent using DMAAP interface"$EBOLD
export ADAPTER=$DMAAPBASE
echo ""
-
+ return 0
}
+
# Turn on debug level tracing in the agent
# args: -
# (Function for test scripts)
__print_err "could not set debug mode" $@
return 1
fi
+ echo ""
return 0
+}
+
+# Turn on trace level tracing in the agent
+# args: -
+# (Function for test scripts)
+set_agent_trace() {
+ echo -e $BOLD"Setting agent trace"$EBOLD
+ curl $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"trace"}' &> /dev/null
+ if [ $? -ne 0 ]; then
+ __print_err "could not set trace mode" $@
+ return 1
+ fi
echo ""
+ return 0
}
# Perform curl retries when making direct call to the agent for the specified http response codes
echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
AGENT_RETRY_CODES=$@
echo ""
+ return
}
#################
__print_err "need one arg, <file-prefix>" $@
exit 1
fi
- echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1
+ echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1$EBOLD
+ docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
checkjsonarraycount=1
fi
- #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} within ${6} seconds ----"
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"
+ echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
((RES_TEST++))
start=$SECONDS
ctr=0
if [ $retcode -ne 0 ]; then
if [ $duration -gt $6 ]; then
((RES_FAIL++))
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached in ${6} seconds, result = ${result} ----"
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
+ __check_stop_at_error
return
fi
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds ----"
return
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
else
if [ $duration -gt $6 ]; then
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached in ${6} seconds, result = ${result} ----"
+ __check_stop_at_error
return
fi
fi
checkjsonarraycount=1
fi
- #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} ----"
echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
((RES_TEST++))
if [ $checkjsonarraycount -eq 0 ]; then
fi
if [ $retcode -ne 0 ]; then
((RES_FAIL++))
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
+ __check_stop_at_error
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met"
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
else
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
+ __check_stop_at_error
fi
else
echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
fi
echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD
}
-
-