#
# This is a script that contains all the functions needed for auto test
-# Arg: local|remote|remote-remove [auto-clean]
+# Arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]
+# Create a test case id, ATC (Auto Test Case), from the name of the test case script.
+# FTC1.sh -> ATC == FTC1
+ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
+
+#Create result file (containing '1' for error) for this test case
+#Will be replaced with a file containing '0' if all test cases pass
+echo "1" > "$PWD/.result$ATC.txt"
+
#Formatting for 'echo' cmd
BOLD="\033[1m"
EBOLD="\033[0m"
exit 1
fi
+tmp=$(which docker-compose)
+if [ $? -ne 0 ] || [ -z tmp ]; then
+ echo -e $RED"docker-compose is required to run the test environment, pls install"$ERED
+ exit 1
+fi
+
# Just resetting any previous echo formatting...
-echo -ne $EBOLD$ERED$EGREEN
+echo -ne $EBOLD
-# source test environment variables
-. ../common/test_env.sh
+# default test environment variables
+TEST_ENV_VAR_FILE=""
echo "Test case started as: ${BASH_SOURCE[$i+1]} "$@
-#Vars for A1 interface version and container count
-G1_A1_VERSION=""
-G2_A1_VERSION=""
-G3_A1_VERSION=""
-G1_COUNT=0
-G2_COUNT=0
-G3_COUNT=0
-
-# Var to switch between http and https. Extra curl flag needed for https
-export RIC_SIM_HTTPX="http"
-export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
-export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
-export RIC_SIM_CERT_MOUNT_DIR="./fakedir" #Fake dir so that the sim container does not find any cert
-
#Localhost constant
LOCALHOST="http://localhost:"
-# Make curl retries for http response codes set in this env var, space separated list of codes
+# Make curl retries towards ECS for http response codes set in this env var, space separated list of codes
+ECS_RETRY_CODES=""
+
+# Make curl retries towards the agent for http response codes set in this env var, space separated list of codes
AGENT_RETRY_CODES=""
+# Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
+AGENT_STAND_ALONE=0
+
# Var to hold 'auto' in case containers shall be stopped when test case ends
AUTO_CLEAN=""
+# Var to hold the app names to use local image for when running 'remote' or 'remote-remove'
+USE_LOCAL_IMAGES=""
+
+# List of available apps to override with local image
+AVAILABLE_LOCAL_IMAGES_OVERRIDE="PA ECS CP SDNC RICSIM"
+
+# Use this var (STOP_AT_ERROR=1 in the test script) for debugging/trouble shooting to take all logs and exit at first FAIL test case
+STOP_AT_ERROR=0
+
+# Function to indent cmd output with one space
+indent1() { sed 's/^/ /'; }
+
+# Function to indent cmd output with two spaces
+indent2() { sed 's/^/ /'; }
+
# Set a description string for the test case
if [ -z "$TC_ONELINE_DESCR" ]; then
TC_ONELINE_DESCR="<no-description>"
echo $tmpval > .tmp_tcsuite_ctr
fi
-# Create a test case id, ATC (Auto Test Case), from the name of the test case script.
-# FTC1.sh -> ATC == FTC1
-ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
-
# Create the logs dir if not already created in the current dir
if [ ! -d "logs" ]; then
mkdir logs
fi
TESTLOGS=$PWD/logs
+# Create the tmp dir for temporary files that is not needed after the test
+# hidden files for the test env is still stored in the current dir
+if [ ! -d "tmp" ]; then
+ mkdir tmp
+fi
+
# Create a http message log for this testcase
HTTPLOG=$PWD"/.httplog_"$ATC".txt"
echo "" > $HTTPLOG
+
# Create a log dir for the test case
mkdir -p $TESTLOGS/$ATC
+# Save create for current logs
+mkdir -p $TESTLOGS/$ATC/previous
+
+rm $TESTLOGS/$ATC/previous/*.log &> /dev/null
+rm $TESTLOGS/$ATC/previous/*.txt &> /dev/null
+rm $TESTLOGS/$ATC/previous/*.json &> /dev/null
+
+mv $TESTLOGS/$ATC/*.log $TESTLOGS/$ATC/previous &> /dev/null
+mv $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
+mv $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
+
# Clear the log dir for the test case
rm $TESTLOGS/$ATC/*.log &> /dev/null
rm $TESTLOGS/$ATC/*.txt &> /dev/null
RES_PASS=0
RES_FAIL=0
RES_CONF_FAIL=0
+RES_DEVIATION=0
+
+#File to keep deviation messages
+DEVIATION_FILE=".tmp_deviations"
+rm $DEVIATION_FILE &> /dev/null
#Var for measuring execution time
TCTEST_START=$SECONDS
+#File to save timer measurement results
+TIMER_MEASUREMENTS=".timer_measurement.txt"
+echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
+
+
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case: "$ATC
echo "----------------------------------- Started: "$(date)
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case setup -----------------------------------"
+START_ARG=$1
+paramerror=0
+if [ $# -lt 1 ]; then
+ paramerror=1
+fi
+if [ $paramerror -eq 0 ]; then
+ if [ "$1" != "remote" ] && [ "$1" != "remote-remove" ] && [ "$1" != "local" ]; then
+ paramerror=1
+ else
+ shift;
+ fi
+fi
+foundparm=0
+while [ $paramerror -eq 0 ] && [ $foundparm -eq 0 ]; do
+ foundparm=1
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "auto-clean" ]; then
+ AUTO_CLEAN="auto"
+ echo "Option set - Auto clean at end of test script"
+ shift;
+ foundparm=0
+ fi
+ fi
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--stop-at-error" ]; then
+ STOP_AT_ERROR=1
+ echo "Option set - Stop at first error"
+ shift;
+ foundparm=0
+ fi
+ fi
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--ricsim-prefix" ]; then
+ shift;
+ RIC_SIM_PREFIX=$1
+ if [ -z "$1" ]; then
+ paramerror=1
+ else
+ echo "Option set - Overriding RIC_SIM_PREFIX with: "$1
+ shift;
+ foundparm=0
+ fi
+ fi
+ fi
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--env-file" ]; then
+ shift;
+ TEST_ENV_VAR_FILE=$1
+ if [ -z "$1" ]; then
+ paramerror=1
+ else
+ echo "Option set - Reading test env from: "$1
+ shift;
+ foundparm=0
+ fi
+ fi
+ fi
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--use-local-image" ]; then
+ USE_LOCAL_IMAGES=""
+ shift
+ while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
+ USE_LOCAL_IMAGES=$USE_LOCAL_IMAGES" "$1
+ if [[ "$AVAILABLE_LOCAL_IMAGES_OVERRIDE" != *"$1"* ]]; then
+ paramerror=1
+ fi
+ shift;
+ done
+ foundparm=0
+ if [ -z "$USE_LOCAL_IMAGES" ]; then
+ paramerror=1
+ else
+ echo "Option set - Override remote images for app(s):"$USE_LOCAL_IMAGES
+ fi
+ fi
+ fi
+done
+echo ""
+
+#Still params left?
+if [ $paramerror -eq 0 ] && [ $# -gt 0 ]; then
+ paramerror=1
+fi
+
+if [ $paramerror -eq 1 ]; then
+ echo -e $RED"Expected arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]"$ERED
+ exit 1
+fi
+
+# sourcing the selected env variables for the test case
+if [ -f "$TEST_ENV_VAR_FILE" ]; then
+ echo -e $BOLD"Sourcing env vars from: "$TEST_ENV_VAR_FILE$EBOLD
+ . $TEST_ENV_VAR_FILE
+
+ if [ -z "$TEST_ENV_PROFILE" ] || [ -z "$SUPPORTED_PROFILES" ]; then
+ echo -e $YELLOW"This test case may no work with selected test env file. TEST_ENV_PROFILE is missing in test_env file or SUPPORTED_PROFILES is missing in test case file"$EYELLOW
+ else
+ if [[ "$SUPPORTED_PROFILES" == *"$TEST_ENV_PROFILE"* ]]; then
+ echo -e $GREEN"Test case support the selected test env file"$EGREEN
+ else
+ echo -e $RED"Test case does not support the selected test env file"$ERED
+ echo -e $RED"Exiting...."$ERED
+ exit 1
+ fi
+ fi
+else
+ echo -e $RED"Selected env var file does not exist: "$TEST_ENV_VAR_FILE$ERED
+ echo " Select one of following env var file matching the intended target of the test"
+ echo " Restart the test using the flag '--env-file <path-to-env-file>"
+ ls ../common/test_env* | indent1
+ exit 1
+fi
+
+#Vars for A1 interface version and container count
+G1_A1_VERSION=""
+G2_A1_VERSION=""
+G3_A1_VERSION=""
+G4_A1_VERSION=""
+G5_A1_VERSION=""
+G1_COUNT=0
+G2_COUNT=0
+G3_COUNT=0
+G4_COUNT=0
+G5_COUNT=0
+
+# Vars to switch between http and https. Extra curl flag needed for https
+export RIC_SIM_HTTPX="http"
+export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
+export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
+export RIC_SIM_CERT_MOUNT_DIR="./cert"
+
+export MR_HTTPX="http"
+export MR_PORT=$MR_INTERNAL_PORT
+export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
+
+export CR_HTTPX="http"
+export CR_PORT=$CR_INTERNAL_PORT
+export CR_LOCAL_PORT=$CR_EXTERNAL_PORT #When CR is running outside the docker net
+export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
+
+export PROD_STUB_HTTPX="http"
+export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
+export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_PORT #When CR is running outside the docker net
+export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
+
+export SDNC_HTTPX="http"
+export SDNC_PORT=$SDNC_INTERNAL_PORT
+export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
+
echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
#Temp var to check for image variable name errors
IMAGE_ERR=0
#Create a file with image info for later printing as a table
-image_list_file=".image-list"
+image_list_file="./tmp/.image-list"
echo -e " Container\tImage\ttag" > $image_list_file
# Check if image env var is set and if so export the env var with image to use (used by docker compose files)
-# arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name>
+# arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>
__check_image_var() {
- if [ $# -ne 5 ]; then
- echo "Expected arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name>"
+ if [ $# -ne 6 ]; then
+ echo "Expected arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>"
((IMAGE_ERR++))
return
fi
+ __check_included_image $6
+ if [ $? -ne 0 ]; then
+ echo -e "$1\t<image-excluded>\t<no-tag>" >> $image_list_file
+ # Image is excluded since the corresponding app is not used in this test
+ return
+ fi
tmp=${1}"\t"
#Create var from the input var names
image="${!4}"
tag="${!5}"
if [ -z $image ]; then
- echo -e $RED"\$"$4" not set in test_env"$ERED
+ echo -e $RED"\$"$4" not set in $TEST_ENV_VAR_FILE"$ERED
((IMAGE_ERR++))
echo ""
tmp=$tmp"<no-image>\t"
tmp=$tmp$image"\t"
fi
if [ -z $tag ]; then
- echo -e $RED"\$"$5" not set in test_env"$ERED
+ echo -e $RED"\$"$5" not set in $TEST_ENV_VAR_FILE"$ERED
((IMAGE_ERR++))
echo ""
tmp=$tmp"<no-tag>\t"
#echo " Configured image for ${1} (script start arg=${2}): "$image":"$tag
}
+
+#Check if app local image shall override remote image
+# Possible IDs for local image override: PA, CP, SDNC, RICSIM, ECS
+__check_image_local_override() {
+ for im in $USE_LOCAL_IMAGES; do
+ if [ "$1" == "$im" ]; then
+ return 1
+ fi
+ done
+ return 0
+}
+
+# Check if app uses image included in this test run
+# Returns 0 if image is included, 1 if not
+# Possible IDs for image inclusion: CBS, CONSUL, CP, CR, ECS, MR, PA, PRODSTUB, RICSIM, SDNC
+__check_included_image() {
+ for im in $INCLUDED_IMAGES; do
+ if [ "$1" == "$im" ]; then
+ return 0
+ fi
+ done
+ return 1
+}
+
# Check that image env setting are available
echo ""
-if [ $# -lt 1 ] || [ $# -gt 2 ]; then
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
- exit 1
-elif [ $1 == "local" ]; then
+
+if [ $START_ARG == "local" ]; then
#Local agent image
- __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG"
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
#Local Control Panel image
- __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG"
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
#Local SNDC image
- __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG"
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
#Local ric sim image
- __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG"
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
-elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
+elif [ $START_ARG == "remote" ] || [ $START_ARG == "remote-remove" ]; then
- #Remote agent image
- __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'PA'
+ if [ $? -eq 0 ]; then
+ #Remote agent image
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG" PA
+ else
+ #Local agent image
+ __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
+ fi
- #Remote Control Panel image
- __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'CP'
+ if [ $? -eq 0 ]; then
+ #Remote Control Panel image
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG" CP
+ else
+ #Local Control Panel image
+ __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
+ fi
- #Remote SDNC image
- __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'SDNC'
+ if [ $? -eq 0 ]; then
+ #Remote SDNC image
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG" SDNC
+ else
+ #Local SNDC image
+ __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
+ fi
- #Remote ric sim image
- __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG"
+ __check_image_local_override 'RICSIM'
+ if [ $? -eq 0 ]; then
+ #Remote ric sim image
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG" RICSIM
+ else
+ #Local ric sim image
+ __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
+ fi
+
+ __check_image_local_override 'ECS'
+ if [ $? -eq 0 ]; then
+ #Remote ecs image
+ __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_REMOTE_IMAGE" "ECS_REMOTE_IMAGE_TAG" ECS
+ else
+ #Local ecs image
+ __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_LOCAL_IMAGE" "ECS_LOCAL_IMAGE_TAG" ECS
+ fi
else
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
+ #Should never get here....
+ echo "Unknow args: "$@
exit 1
fi
-if [ $# -eq 2 ]; then
- if [ $2 == "auto-clean" ]; then
- echo "Stting automatic cleaning of container when test case ends"
- AUTO_CLEAN="auto"
- else
- echo "Expected arg: local|remote|remote-remove [auto-clean]"
- exit 1
- fi
-fi
# These images are not built as part of this project official images, just check that env vars are set correctly
-__check_image_var " Message Router" $1 "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG"
-__check_image_var " Callback Receiver" $1 "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG"
-__check_image_var " Consul" $1 "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG"
-__check_image_var " CBS" $1 "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC DB" $1 "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC ONAP A1 Adapter" $1 "SDNC_ONAP_A1_ADAPTER_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE_TAG"
-__check_image_var " SDNC ONAP DB" $1 "SDNC_ONAP_DB_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE_TAG"
+__check_image_var " Message Router" $START_ARG "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG" MR
+__check_image_var " Callback Receiver" $START_ARG "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG" CR
+__check_image_var " Producer stub" $START_ARG "PROD_STUB_IMAGE" "PROD_STUB_LOCAL_IMAGE" "PROD_STUB_LOCAL_IMAGE_TAG" PRODSTUB
+__check_image_var " Consul" $START_ARG "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG" CONSUL
+__check_image_var " CBS" $START_ARG "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG" CBS
+__check_image_var " SDNC DB" $START_ARG "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG" SDNC #Uses sdnc app name
#Errors in image setting - exit
if [ $IMAGE_ERR -ne 0 ]; then
fi
#Print a tables of the image settings
-echo -e $BOLD"Images configured for start arg: "$1 $EBOLD
+echo -e $BOLD"Images configured for start arg: "$START $EBOLD
column -t -s $'\t' $image_list_file
echo ""
SIM_GROUP=$PWD/../simulator-group
if [ ! -d $SIM_GROUP ]; then
echo "Trying to set env var SIM_GROUP to dir 'simulator-group' in the nontrtric repo, but failed."
- echo -e $RED"Please set the SIM_GROUP manually in the test_env.sh"$ERED
+ echo -e $RED"Please set the SIM_GROUP manually in the applicable $TEST_ENV_VAR_FILE"$ERED
exit 1
else
echo " SIM_GROUP auto set to: " $SIM_GROUP
fi
elif [ $SIM_GROUP = *simulator_group ]; then
- echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check common/test_env.sh"$ERED
+ echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check $TEST_ENV_VAR_FILE"$ERED
exit 1
else
echo " SIM_GROUP env var already set to: " $SIM_GROUP
echo -ne " Attempt to stop and remove container(s), if running - ${SAMELINE}"
tmp="$(docker ps -aq --filter name=${3})"
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker stop $tmp &> .dockererr
+ docker stop $tmp &> ./tmp/.dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Container(s) could not be stopped - try manual stopping the container(s)"$ERED
- cat .dockererr
+ cat ./tmp/.dockererr
return 1
fi
fi
echo -ne " Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
tmp="$(docker ps -aq --filter name=${3})" &> /dev/null
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker rm $tmp &> .dockererr
+ docker rm $tmp &> ./tmp/.dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Container(s) could not be removed - try manual removal of the container(s)"$ERED
- cat .dockererr
+ cat ./tmp/.dockererr
return 1
fi
fi
echo -ne " Removing image - ${SAMELINE}"
tmp="$(docker images -q ${4})" &> /dev/null
if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
- docker rmi $4 &> .dockererr
+ docker rmi --force $4 &> ./tmp/.dockererr
if [ $? -ne 0 ]; then
((IMAGE_ERR++))
echo ""
echo -e $RED" Image could not be removed - try manual removal of the image"$ERED
- cat .dockererr
+ cat ./tmp/.dockererr
return 1
fi
echo -e " Removing image - "$GREEN"removed"$EGREEN
fi
if [ -z "$tmp_im" ]; then
echo -ne " Pulling image${SAMELINE}"
- docker pull $4 &> .dockererr
+ docker pull $4 &> ./tmp/.dockererr
tmp_im=$(docker images ${4} | grep -v REPOSITORY)
if [ -z "$tmp_im" ]; then
echo ""
echo -e " Pulling image -$RED could not be pulled"$ERED
((IMAGE_ERR++))
- cat .dockererr
+ cat ./tmp/.dockererr
return 1
fi
echo -e " Pulling image -$GREEN Pulled $EGREEN"
echo -e $BOLD"Pulling configured images, if needed"$EBOLD
-app="Policy Agent"; __check_and_pull_image $1 "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
-app="Non-RT RIC Control Panel"; __check_and_pull_image $1 "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
-app="SDNC A1 Controller"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
-app="Near-RT RIC Simulator"; __check_and_pull_image $1 "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
+__check_included_image 'PA'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'PA'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="Policy Agent"; __check_and_pull_image $START_ARG_MOD "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
+else
+ echo -e $YELLOW" Excluding PA image from image check/pull"$EYELLOW
+fi
-app="Consul"; __check_and_pull_image $1 "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
-app="CBS"; __check_and_pull_image $1 "$app" $CBS_APP_NAME $CBS_IMAGE
-app="SDNC DB"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
-app="SDNC ONAP A1 Adapter"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
-app="SDNC ONAP DB"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
+__check_included_image 'ECS'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'ECS'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="ECS"; __check_and_pull_image $START_ARG_MOD "$app" $ECS_APP_NAME $ECS_IMAGE
+else
+ echo -e $YELLOW" Excluding ECS image from image check/pull"$EYELLOW
+fi
-# MR stub image not checked, will be built by this script - only local image
-# CR stub image not checked, will be built by this script - only local image
+__check_included_image 'CP'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'CP'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="Non-RT RIC Control Panel"; __check_and_pull_image $START_ARG_MOD "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
+else
+ echo -e $YELLOW" Excluding Non-RT RIC Control Panel image from image check/pull"$EYELLOW
+fi
+__check_included_image 'RICSIM'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'RICSIM'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="Near-RT RIC Simulator"; __check_and_pull_image $START_ARG_MOD "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
+else
+ echo -e $YELLOW" Excluding Near-RT RIC Simulator image from image check/pull"$EYELLOW
+fi
+
+
+__check_included_image 'CONSUL'
+if [ $? -eq 0 ]; then
+ app="Consul"; __check_and_pull_image $START_ARG "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
+else
+ echo -e $YELLOW" Excluding Consul image from image check/pull"$EYELLOW
+fi
+
+__check_included_image 'CBS'
+if [ $? -eq 0 ]; then
+ app="CBS"; __check_and_pull_image $START_ARG "$app" $CBS_APP_NAME $CBS_IMAGE
+else
+ echo -e $YELLOW" Excluding CBS image from image check/pull"$EYELLOW
+fi
+
+__check_included_image 'SDNC'
+if [ $? -eq 0 ]; then
+ START_ARG_MOD=$START_ARG
+ __check_image_local_override 'SDNC'
+ if [ $? -eq 1 ]; then
+ START_ARG_MOD="local"
+ fi
+ app="SDNC A1 Controller"; __check_and_pull_image $START_ARG_MOD "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
+ app="SDNC DB"; __check_and_pull_image $START_ARG "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
+else
+ echo -e $YELLOW" Excluding SDNC image and related DB image from image check/pull"$EYELLOW
+fi
#Errors in image setting - exit
if [ $IMAGE_ERR -ne 0 ]; then
echo ""
echo "#################################################################################################"
echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
+ echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
echo "#################################################################################################"
echo ""
exit 1
echo -e $BOLD"Building images needed for test"$EBOLD
curdir=$PWD
-cd $curdir
-cd ../mrstub
-echo " Building mrstub image: mrstub:latest"
-docker build -t mrstub . &> .dockererr
+__check_included_image 'MR'
if [ $? -eq 0 ]; then
- echo -e $GREEN" Build Ok"$EGREEN
+ cd $curdir
+ cd ../mrstub
+ echo " Building mrstub image: $MRSTUB_LOCAL_IMAGE:$MRSTUB_LOCAL_IMAGE_TAG"
+ docker build -t $MRSTUB_LOCAL_IMAGE . &> .dockererr
+ if [ $? -eq 0 ]; then
+ echo -e $GREEN" Build Ok"$EGREEN
+ else
+ echo -e $RED" Build Failed"$ERED
+ ((RES_CONF_FAIL++))
+ cat .dockererr
+ fi
+ cd $curdir
+else
+ echo -e $YELLOW" Excluding mrstub from image build"$EYELLOW
+fi
+
+__check_included_image 'CR'
+if [ $? -eq 0 ]; then
+ cd ../cr
+ echo " Building Callback Receiver image: $CR_LOCAL_IMAGE:$CR_IMAGE_TAG"
+ docker build -t $CR_LOCAL_IMAGE . &> .dockererr
+ if [ $? -eq 0 ]; then
+ echo -e $GREEN" Build Ok"$EGREEN
+ else
+ echo -e $RED" Build Failed"$ERED
+ ((RES_CONF_FAIL++))
+ cat .dockererr
+ fi
+ cd $curdir
else
- echo -e $RED" Build Failed"$ERED
- ((RES_CONF_FAIL++))
- cat .dockererr
+ echo -e $YELLOW" Excluding Callback Receiver from image build"$EYELLOW
fi
-cd $curdir
-cd ../cr
-echo " Building Callback Receiver image: callback-receiver:latest"
-docker build -t callback-receiver . &> .dockererr
+__check_included_image 'PRODSTUB'
if [ $? -eq 0 ]; then
- echo -e $GREEN" Build Ok"$EGREEN
+ cd ../prodstub
+ echo " Building Producer stub image: $PROD_STUB_LOCAL_IMAGE:$PROD_STUB_LOCAL_IMAGE_TAG"
+ docker build -t $PROD_STUB_LOCAL_IMAGE . &> .dockererr
+ if [ $? -eq 0 ]; then
+ echo -e $GREEN" Build Ok"$EGREEN
+ else
+ echo -e $RED" Build Failed"$ERED
+ ((RES_CONF_FAIL++))
+ cat .dockererr
+ fi
+ cd $curdir
else
- echo -e $RED" Build Failed"$ERED
- ((RES_CONF_FAIL++))
- cat .dockererr
+ echo -e $YELLOW" Excluding Producer stub from image build"$EYELLOW
fi
-cd $curdir
echo ""
# Create a table of the images used in the script
echo -e $BOLD"Local docker registry images used in the this test script"$EBOLD
-docker_tmp_file=.docker-images-table
-format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}"
-echo -e " Application\tRepository\tTag\tCreated Since\tSize" > $docker_tmp_file
-echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >> $docker_tmp_file
-echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
-echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >> $docker_tmp_file
-echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >> $docker_tmp_file
-echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >> $docker_tmp_file
-echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
-echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC ONAP A1 Adapter\t$(docker images --format $format_string $SDNC_ONAP_A1_ADAPTER_IMAGE)" >> $docker_tmp_file
-echo -e " SDNC ONAP DB\t$(docker images --format $format_string $SDNC_ONAP_DB_IMAGE)" >> $docker_tmp_file
+docker_tmp_file=./tmp/.docker-images-table
+format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\\t{{.CreatedAt}}"
+echo -e " Application\tRepository\tTag\tCreated since\tSize\tCreated at" > $docker_tmp_file
+__check_included_image 'PA'
+if [ $? -eq 0 ]; then
+ echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'ECS'
+if [ $? -eq 0 ]; then
+ echo -e " ECS\t$(docker images --format $format_string $ECS_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'CP'
+if [ $? -eq 0 ]; then
+ echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'RICSIM'
+if [ $? -eq 0 ]; then
+ echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'MR'
+if [ $? -eq 0 ]; then
+ echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'CR'
+if [ $? -eq 0 ]; then
+ echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'PRODSTUB'
+if [ $? -eq 0 ]; then
+ echo -e " Produccer stub\t$(docker images --format $format_string $PROD_STUB_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'CONSUL'
+if [ $? -eq 0 ]; then
+ echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'CBS'
+if [ $? -eq 0 ]; then
+ echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
+fi
+__check_included_image 'SDNC'
+if [ $? -eq 0 ]; then
+ echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
+ echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
+fi
column -t -s $'\t' $docker_tmp_file
echo ""
+ if [ $RES_DEVIATION -gt 0 ]; then
+ echo "Test case deviations"
+ echo "===================================="
+ cat $DEVIATION_FILE
+ fi
+ echo ""
+ echo "Timer measurement in the test script"
+ echo "===================================="
+ column -t -s $'\t' $TIMER_MEASUREMENTS
+ echo ""
+
total=$((RES_PASS+RES_FAIL))
if [ $RES_TEST -eq 0 ]; then
echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
if [ -f .tmp_tcsuite_pass ]; then
echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
fi
+ #Create file with OK exit code
+ echo "0" > "$PWD/.result$ATC.txt"
else
echo -e "One or more tests with status \033[31m\033[1mFAIL\033[0m "
echo -e "\033[31m\033[1m ___ _ ___ _ \033[0m"
echo "++++ Number of failed tests: "$RES_FAIL
echo ""
echo "++++ Number of failed configs: "$RES_CONF_FAIL
+ echo ""
+ echo "++++ Number of test case deviations: "$RES_DEVIATION
+ echo ""
echo "------------------------------------- Test case complete ---------------------------------"
echo "-------------------------------------------------------------------------------------------------"
echo ""
###### Functions for start, configuring, stoping, cleaning etc ######
#####################################################################
+# Start timer for time measurement
+# args - (any args will be printed though)
+start_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ TC_TIMER=$SECONDS
+ echo " Timer started"
+}
+
+# Print the value of the time (in seconds)
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+}
+
+# Print the value of the time (in seconds) and reset the timer
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_and_reset_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))" seconds"
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+ TC_TIMER=$SECONDS
+ echo " Timer reset"
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+
+}
+# Print info about a deviations from intended tests
+# Each deviation counted is also printed in the testreport
+# args <deviation message to print>
+deviation() {
+ echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <deviation message to print>" $@
+ exit 1
+ fi
+ ((RES_DEVIATION++))
+ echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
+ echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
+ echo ""
+}
+
+# Stop at first FAIL test case and take all logs - only for debugging/trouble shooting
+__check_stop_at_error() {
+ if [ $STOP_AT_ERROR -eq 1 ]; then
+ echo -e $RED"Test script configured to stop at first FAIL, taking all logs and stops"$ERED
+ store_logs "STOP_AT_ERROR"
+ exit 1
+ fi
+ return 0
+}
+
+# Check if app name var is set. If so return the app name otherwise return "NOTSET"
+__check_app_name() {
+ if [ $# -eq 1 ]; then
+ echo $1
+ else
+ echo "NOTSET"
+ fi
+}
# Stop and remove all containers
# args: -
echo -e $BOLD"Stopping and removing all running containers, by container name"$EBOLD
- CONTAINTER_NAMES=("Policy Agent " $POLICY_AGENT_APP_NAME\
- "Non-RT RIC Simulator(s)" $RIC_SIM_PREFIX\
- "Message Router " $MR_APP_NAME\
- "Callback Receiver " $CR_APP_NAME\
- "Control Panel " $CONTROL_PANEL_APP_NAME\
- "SDNC A1 Controller " $SDNC_APP_NAME\
- "SDNC DB " $SDNC_DB_APP_NAME\
- "SDNC ONAP A1 Adapter " $SDNC_ONAP_APP_NAME\
- "SDNC DB " $SDNC_ONAP_DB_APP_NAME\
- "CBS " $CBS_APP_NAME\
- "Consul " $CONSUL_APP_NAME)
+ CONTAINTER_NAMES=("Policy Agent " $(__check_app_name $POLICY_AGENT_APP_NAME)\
+ "ECS " $(__check_app_name $ECS_APP_NAME)\
+ "Non-RT RIC Simulator(s)" $(__check_app_name $RIC_SIM_PREFIX)\
+ "Message Router " $(__check_app_name $MR_APP_NAME)\
+ "Callback Receiver " $(__check_app_name $CR_APP_NAME)\
+ "Producer stub " $(__check_app_name $PROD_STUB_APP_NAME)\
+ "Control Panel " $(__check_app_name $CONTROL_PANEL_APP_NAME)\
+ "SDNC A1 Controller " $(__check_app_name $SDNC_APP_NAME)\
+ "SDNC DB " $(__check_app_name $SDNC_DB_APP_NAME)\
+ "CBS " $(__check_app_name $CBS_APP_NAME)\
+ "Consul " $(__check_app_name $CONSUL_APP_NAME))
nw=0 # Calc max width of container name, to make a nice table
for (( i=1; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
+
if [ ${#CONTAINTER_NAMES[i]} -gt $nw ]; then
nw=${#CONTAINTER_NAMES[i]}
fi
for (( i=0; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
APP="${CONTAINTER_NAMES[i]}"
CONTR="${CONTAINTER_NAMES[i+1]}"
- for((w=${#CONTR}; w<$nw; w=w+1)); do
- CONTR="$CONTR "
- done
- echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
- docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
- echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
- docker rm $(docker ps -qa --filter name=${CONTR}) &> /dev/null
- echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
+ if [ $CONTR != "NOTSET" ]; then
+ for((w=${#CONTR}; w<$nw; w=w+1)); do
+ CONTR="$CONTR "
+ done
+ echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
+ docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
+ echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
+ docker rm --force $(docker ps -qa --filter name=${CONTR}) &> /dev/null
+ echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
+ fi
done
echo ""
+
+ echo -e $BOLD" Removing docker network"$EBOLD
+ TMP=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
+ if [ "$TMP" == $DOCKER_SIM_NWNAME ]; then
+ docker network rm $DOCKER_SIM_NWNAME | indent2
+ if [ $? -ne 0 ]; then
+ echo -e $RED" Cannot remove docker network. Manually remove or disconnect containers from $DOCKER_SIM_NWNAME"$ERED
+ exit 1
+ fi
+ fi
+ echo -e "$GREEN Done$EGREEN"
+
+ echo -e $BOLD" Removing all unused docker neworks"$EBOLD
+ docker network prune --force | indent2
+ echo -e "$GREEN Done$EGREEN"
+
+ echo -e $BOLD" Removing all unused docker volumes"$EBOLD
+ docker volume prune --force | indent2
+ echo -e "$GREEN Done$EGREEN"
+
+ echo -e $BOLD" Removing all dangling/untagged docker images"$EBOLD
+ docker rmi --force $(docker images -q -f dangling=true) &> /dev/null
+ echo -e "$GREEN Done$EGREEN"
+ echo ""
+
+ CONTRS=$(docker ps | awk '$1 != "CONTAINER" { n++ }; END { print n+0 }')
+ if [ $? -eq 0 ]; then
+ if [ $CONTRS -ne 0 ]; then
+ echo -e $RED"Containers running, may cause distubance to the test case"$ERED
+ docker ps -a
+ fi
+ fi
}
# Function stop and remove all container in the end of the test script, if the arg 'auto-clean' is given at test script start
}
# Function to sleep a test case for a numner of seconds. Prints the optional text args as info
-# args: <sleep-time-in-sec> [any-text-in-quoteds-to-printed]
+# args: <sleep-time-in-sec> [any-text-in-quotes-to-be-printed]
# (Function for test scripts)
sleep_wait() {
# (Not for test scripts)
__find_sim_port() {
name=$1" " #Space appended to prevent matching 10 if 1 is desired....
- cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
- res=$(eval $cmdstr)
+ cmdstr="docker inspect --format='{{(index (index .NetworkSettings.Ports \"$RIC_SIM_PORT/tcp\") 0).HostPort}}' ${name}"
+ res=$(eval $cmdstr)
if [[ "$res" =~ ^[0-9]+$ ]]; then
echo $res
else
return 1
fi
if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
- echo -e "Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
- docker network create $DOCKER_SIM_NWNAME
+ echo -e " Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
+ docker network create $DOCKER_SIM_NWNAME | indent2
if [ $? -ne 0 ]; then
echo -e $RED" Could not create docker network $DOCKER_SIM_NWNAME"$ERED
return 1
+ else
+ echo -e "$GREEN Done$EGREEN"
fi
else
echo -e " Docker network $DOCKER_SIM_NWNAME already exists$GREEN OK $EGREEN"
appname=$1
localport=$2
url=$3
- app_started=0
- for i in {1..10}; do
- if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
- echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
- app_started=1
- break
- else
- sleep $i
- fi
- done
- if [ $app_started -eq 0 ]; then
- ((RES_CONF_FAIL++))
- echo ""
- echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
- return 1
- fi
- if [ $localport -eq 0 ]; then
- while [ $localport -eq 0 ]; do
- echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
- localport=$(__find_sim_port $appname)
- sleep 1
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ if [[ $appname != "STANDALONE_"* ]] ; then
+ app_started=0
+ for i in {1..10}; do
+ if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
+ echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
+ app_started=1
+ break
+ else
+ sleep $i
+ fi
done
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
- echo ""
+ if [ $app_started -eq 0 ]; then
+ ((RES_CONF_FAIL++))
+ echo ""
+ echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
+ echo -e $RED" Stopping script..."$ERED
+ exit 1
+ fi
+ if [ $localport -eq 0 ]; then
+ while [ $localport -eq 0 ]; do
+ echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
+ localport=$(__find_sim_port $appname)
+ sleep 1
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ done
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
+ echo ""
+ fi
fi
pa_st=false
echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
- for i in {1..20}; do
+ TSTART=$SECONDS
+ for i in {1..50}; do
if [ $4 == "https" ]; then
result="$(__do_curl "-k https://localhost:"${localport}${url})"
else
result="...response text too long, omitted"
fi
echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
- echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN"
+ echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN after $(($SECONDS-$TSTART)) seconds"
pa_st=true
break
else
- #echo " Retrying in $i seconds"
- echo -ne " Waiting for container ${appname} service status...retrying in $i seconds${SAMELINE}"
- sleep $i
+ TS_TMP=$SECONDS
+ while [ $(($TS_TMP+$i)) -gt $SECONDS ]; do
+ echo -ne " Waiting for container ${appname} service status...$(($SECONDS-$TSTART)) seconds, retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
+ sleep 1
+ done
fi
done
if [ "$pa_st" = "false" ]; then
((RES_CONF_FAIL++))
- echo -e $RED" Container ${appname} did not respond to service status"$ERED
+ echo -e $RED" Container ${appname} did not respond to service status in $(($SECONDS-$TSTART)) seconds"$ERED
return 0
fi
if [ $? -ne 0 ]; then
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
+ echo -e $RED"Stopping script...."$ERED
+ exit 1
fi
+ elif [ "$2" == "STANDALONE" ]; then
+ echo "Skipping docker-compose"
else
docker-compose up -d $2 &> .dockererr
if [ $? -ne 0 ]; then
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
+ echo -e $RED"Stopping script...."$ERED
+ exit 1
fi
fi
-
+ app_prefix=""
+ if [ "$2" == "STANDALONE" ]; then
+ app_prefix="STANDALONE_"
+ fi
shift; shift;
cntr=0
while [ $cntr -lt $variableArgCount ]; do
- app=$1; shift;
+ app=$app_prefix$1; shift;
port=$1; shift;
url=$1; shift;
httpx=$1; shift;
return 0
}
+# Generate a UUID to use as prefix for policy ids
+generate_uuid() {
+ UUID=$(python3 -c 'import sys,uuid; sys.stdout.write(uuid.uuid4().hex)')
+ #Reduce length to make space for serial id, us 'a' as marker where the serial id is added
+ UUID=${UUID:0:${#UUID}-4}"a"
+}
+
####################
### Consul functions
####################
echo " Loading config for "$POLICY_AGENT_APP_NAME" from "$1
- curl -s $LOCALHOST${CONSUL_EXTERNAL_PORT}/v1/kv/${POLICY_AGENT_APP_NAME}?dc=dc1 -X PUT -H 'Accept: application/json' -H 'Content-Type: application/json' -H 'X-Requested-With: XMLHttpRequest' --data-binary "@"$1 >/dev/null
+ curlString="$LOCALHOST${CONSUL_EXTERNAL_PORT}/v1/kv/${POLICY_AGENT_APP_NAME}?dc=dc1 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @"$1
+ result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
echo -e $RED" FAIL - json config could not be loaded to consul" $ERED
((RES_CONF_FAIL++))
return 1
fi
body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
+ echo $body > "./tmp/.output"$1
if [ $? -ne 0 ]; then
echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
}
# Function to perpare the consul configuration according to the current simulator configuration
-# args: SDNC|SDNC_ONAP|NOSDNC <output-file>
+# args: SDNC|NOSDNC <output-file>
# (Function for test scripts)
prepare_consul_config() {
echo -e $BOLD"Prepare Consul config"$EBOLD
if [ $# != 2 ]; then
((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
+ __print_err "need two args, SDNC|NOSDNC <output-file>" $@
exit 1
fi
if [ $1 == "SDNC" ]; then
echo -e " Config$BOLD including SDNC$EBOLD configuration"
- elif [ $1 == "SDNC_ONAP" ]; then
- echo -e " Config$BOLD including SDNC ONAP$EBOLD configuration"
elif [ $1 == "NOSDNC" ]; then
- echo -e " Config$BOLD excluding SDNC or SDNC ONAP$EBOLD configuration"
+ echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
else
((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
+ __print_err "need two args, SDNC|NOSDNC <output-file>" $@
exit 1
fi
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_APP_NAME:$SDNC_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n ],"
fi
- if [ $1 == "SDNC_ONAP" ]; then
- config_json=$config_json"\n \"controller\": ["
- config_json=$config_json"\n {"
- config_json=$config_json"\n \"name\": \"$SDNC_ONAP_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
- config_json=$config_json"\n \"userName\": \"$SDNC_ONAP_USER\","
- config_json=$config_json"\n \"password\": \"$SDNC_ONAP_PWD\""
- config_json=$config_json"\n }"
- config_json=$config_json"\n ],"
- fi
-
config_json=$config_json"\n \"streams_publishes\": {"
config_json=$config_json"\n \"dmaap_publisher\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-WRITE\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
config_json=$config_json"\n \"dmaap_subscriber\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-READ/users/policy-agent\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
config_json=$config_json"\n \"ric\": ["
- rics=$(docker ps | grep ricsim | awk '{print $NF}')
+ rics=$(docker ps | grep $RIC_SIM_PREFIX | awk '{print $NF}')
if [ $? -ne 0 ] || [ -z "$rics" ]; then
echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
fi
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$ric\","
- config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
+ fi
if [ $1 == "SDNC" ]; then
config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
- elif [ $1 == "SDNC_ONAP" ]; then
- config_json=$config_json"\n \"controller\": \"$SDNC_ONAP_APP_NAME\","
fi
config_json=$config_json"\n \"managedElementIds\": ["
config_json=$config_json"\n \"me1_$ric\","
start_consul_cbs() {
echo -e $BOLD"Starting Consul and CBS"$EBOLD
-
+ __check_included_image 'CONSUL'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Consul image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"Consul will not be started"$ERED
+ exit
+ fi
__start_container consul_cbs NODOCKERARGS "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" "http" \
"$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck" "http"
}
###########################
use_simulator_http() {
- echo -e "Using unsecure $BOLD http $EBOLD towards the simulators"
+ echo -e "Using $BOLD http $EBOLD towards the simulators"
export RIC_SIM_HTTPX="http"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
- export RIC_SIM_CERT_MOUNT_DIR="./fakedir" #Fake dir so that the sim container does not find any cert
echo ""
}
use_simulator_https() {
- echo -e "Using secure $BOLD https $EBOLD towards the simulators"
+ echo -e "Using $BOLD https $EBOLD towards the simulators"
export RIC_SIM_HTTPX="https"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
- export RIC_SIM_CERT_MOUNT_DIR="./cert"
echo ""
}
-# Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
-# args: ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
+# Start one group (ricsim_g1, ricsim_g2 .. ricsim_g5) with a number of RIC Simulators using a given A interface
+# 'ricsim' may be set on command line to other prefix
+# args: ricsim_g1|ricsim_g2|ricsim_g3|ricsim_g4|ricsim_g5 <count> <interface-id>
# (Function for test scripts)
start_ric_simulators() {
echo -e $BOLD"Starting RIC Simulators"$EBOLD
+ __check_included_image 'RICSIM'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Near-RT RIC Simulator image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Near-RT RIC Simulartor(s) will not be started"$ERED
+ exit
+ fi
+
+ RIC1=$RIC_SIM_PREFIX"_g1"
+ RIC2=$RIC_SIM_PREFIX"_g2"
+ RIC3=$RIC_SIM_PREFIX"_g3"
+ RIC4=$RIC_SIM_PREFIX"_g4"
+ RIC5=$RIC_SIM_PREFIX"_g5"
+
if [ $# != 3 ]; then
((RES_CONF_FAIL++))
- __print_err "need three args, ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>" $@
+ __print_err "need three args, $RIC1|$RIC2|$RIC3|$RIC4|$RIC5 <count> <interface-id>" $@
exit 1
fi
echo " $2 simulators using basename: $1 on interface: $3"
#Set env var for simulator count and A1 interface vesion for the given group
- if [ $1 == "ricsim_g1" ]; then
+ if [ $1 == "$RIC1" ]; then
G1_COUNT=$2
G1_A1_VERSION=$3
- elif [ $1 == "ricsim_g2" ]; then
+ elif [ $1 == "$RIC2" ]; then
G2_COUNT=$2
G2_A1_VERSION=$3
- elif [ $1 == "ricsim_g3" ]; then
+ elif [ $1 == "$RIC3" ]; then
G3_COUNT=$2
G3_A1_VERSION=$3
+ elif [ $1 == "$RIC4" ]; then
+ G4_COUNT=$2
+ G4_A1_VERSION=$3
+ elif [ $1 == "$RIC5" ]; then
+ G5_COUNT=$2
+ G5_A1_VERSION=$3
else
((RES_CONF_FAIL++))
- __print_err "need three args, gricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>" $@
+ __print_err "need three args, $RIC1|$RIC2|$RIC3|$RIC4|$RIC5 <count> <interface-id>" $@
exit 1
fi
export G1_A1_VERSION
export G2_A1_VERSION
export G3_A1_VERSION
+ export G4_A1_VERSION
+ export G5_A1_VERSION
- docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT"
+ docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT --scale g4=$G4_COUNT --scale g5=$G5_COUNT"
app_data=""
cntr=1
while [ $cntr -le $2 ]; do
start_control_panel() {
echo -e $BOLD"Starting Control Panel"$EBOLD
-
+ __check_included_image 'CP'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Control Panel image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Control Panel will not be started"$ERED
+ exit
+ fi
__start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/" "http"
}
echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
- __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT "/apidoc/explorer" "http"
-
-}
-
-#######################
-### SDNC ONAP functions
-#######################
-
-# Start the SDNC ONAP A1 Adapter
-# args: -
-# (Function for test scripts)
-start_sdnc_onap() {
-
- echo -e $BOLD"Starting SDNC ONAP A1 Adapter"$EBOLD
-
- __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT "/apidoc/explorer" "http"
-
-}
-
-# Configure the SDNC ONAP A1 Adapter
-# args: -
-# (Function for test scripts)
-config_sdnc_onap() {
-
- echo -e $BOLD"Configuring SDNC ONAP A1 Adapter"$EBOLD
-
- LOCALFILE=".sdnc_onap.prop"
- REMOTEFILE="/tmp/.sdnc_onap.prop"
-
- docker cp $SDNC_ONAP_APP_NAME:$SDNC_ONAP_PROPERTIES_FILE $LOCALFILE
- if [ $? -ne 0 ]; then
- echo -e $RED"Could not copy $SDNC_ONAP_PROPERTIES_FILE from $SDNC_ONAP_APP_NAME container"$ERED
- exit 1
+ __check_included_image 'SDNC'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The image for SDNC and the related DB has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"SDNC will not be started"$ERED
+ exit
fi
- #Config of the prop file shall be inserted here
+ __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
- #Copy file to /tmp and then to final destination, a trick to get correct permission of the file.
+}
- docker cp $LOCALFILE $SDNC_ONAP_APP_NAME:$REMOTEFILE
- if [ $? -ne 0 ]; then
- echo -e $RED"Could not copy local $LOCALFILE to $REMOTEFILE in $SDNC_ONAP_APP_NAME container"$ERED
- exit 1
- fi
+use_sdnc_http() {
+ echo -e "Using $BOLD http $EBOLD towards SDNC"
+ export SDNC_HTTPX="http"
+ export SDNC_PORT=$SDNC_INTERNAL_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
+ echo ""
+}
- docker exec -it $SDNC_ONAP_APP_NAME cp $REMOTEFILE $SDNC_ONAP_PROPERTIES_FILE
- if [ $? -ne 0 ]; then
- echo -e $RED"Could not copy $REMOTEFILE to $SDNC_ONAP_PROPERTIES_FILE in $SDNC_ONAP_APP_NAME container"$ERED
- exit 1
- fi
+use_sdnc_https() {
+ echo -e "Using $BOLD https $EBOLD towards SDNC"
+ export SDNC_HTTPX="https"
+ export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
+ echo ""
}
#####################
start_mr() {
echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
+ __check_included_image 'MR'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Message Router image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Message Router will not be started"$ERED
+ exit
+ fi
export MR_CERT_MOUNT_DIR="./cert"
__start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
+}
+
+use_mr_http() {
+ echo -e "Using $BOLD http $EBOLD towards MR"
+ export MR_HTTPX="http"
+ export MR_PORT=$MR_INTERNAL_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
+ echo ""
+}
+use_mr_https() {
+ echo -e "Using $BOLD https $EBOLD towards MR"
+ export MR_HTTPX="https"
+ export MR_PORT=$MR_INTERNAL_SECURE_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
+ echo ""
}
+
################
### CR functions
################
start_cr() {
echo -e $BOLD"Starting Callback Receiver"$EBOLD
-
+ __check_included_image 'CR'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Callback Receiver image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Callback Receiver will not be started"$ERED
+ exit
+ fi
__start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/" "http"
}
+use_cr_http() {
+ echo -e "Using $BOLD http $EBOLD towards CR"
+ export CR_HTTPX="http"
+ export CR_PORT=$CR_INTERNAL_PORT
+ export CR_LOCAL_PORT=$CR_EXTERNAL_PORT
+ export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
+ echo ""
+}
+
+use_cr_https() {
+ echo -e "Using $BOLD https $EBOLD towards CR"
+ export CR_HTTPX="https"
+ export CR_PORT=$CR_INTERNAL_SECURE_PORT
+ export CR_LOCAL_PORT=$CR_EXTERNAL_SECURE_PORT
+ export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
+ echo ""
+}
+
+###########################
+### Producer stub functions
+###########################
+
+# Start the Producer stub in the simulator group
+# args: -
+# (Function for test scripts)
+start_prod_stub() {
+
+ echo -e $BOLD"Starting Producer stub"$EBOLD
+ __check_included_image 'PRODSTUB'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Producer stub image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Producer stub will not be started"$ERED
+ exit
+ fi
+ __start_container prodstub NODOCKERARGS $PROD_STUB_APP_NAME $PROD_STUB_EXTERNAL_PORT "/" "http"
+
+}
+
+use_prod_stub_http() {
+ echo -e "Using $BOLD http $EBOLD towards Producer stub"
+ export PROD_STUB_HTTPX="http"
+ export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
+ export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_PORT
+ export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
+ echo ""
+}
+
+use_prod_stub_https() {
+ echo -e "Using $BOLD https $EBOLD towards Producer stub"
+ export PROD_STUB_HTTPX="https"
+ export PROD_STUB_PORT=$PROD_STUB_INTERNAL_SECURE_PORT
+ export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_SECURE_PORT
+ export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
+ echo ""
+}
+
###########################
### Policy Agents functions
###########################
-# Start the policy agwent
+# Use an agent on the local machine instead of container
+use_agent_stand_alone() {
+ AGENT_STAND_ALONE=1
+}
+
+# Start the policy agent
# args: -
# (Function for test scripts)
start_policy_agent() {
echo -e $BOLD"Starting Policy Agent"$EBOLD
- __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ __check_included_image 'PA'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Policy Agent image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"The Policy Agent will not be started"$ERED
+ exit
+ fi
+ __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ else
+ echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
+ echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
+ echo -e $RED"application.yaml"$ERED
+ echo -e $RED"The application jar may need to be built before continuing"$ERED
+ echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
+
+ read -p "<press any key to continue>"
+ __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ fi
}
# args: -
# (Function for test scripts)
use_agent_rest_http() {
- echo -e $BOLD"Using agent REST interface with http"$EBOLD
+ echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent"
export ADAPTER=$RESTBASE
echo ""
}
# args: -
# (Function for test scripts)
use_agent_rest_https() {
- echo -e $BOLD"Using agent REST interface with https"$EBOLD
+ echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
export ADAPTER=$RESTBASE_SECURE
echo ""
+ return 0
}
-# All calls to the agent will be directed to the agent dmaap interface from now on
+# All calls to the agent will be directed to the agent dmaap interface over http from now on
# args: -
# (Function for test scripts)
-use_agent_dmaap() {
- echo -e $BOLD"Using agent DMAAP interface"$EBOLD
+use_agent_dmaap_http() {
+ echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
export ADAPTER=$DMAAPBASE
echo ""
+ return 0
+}
+# All calls to the agent will be directed to the agent dmaap interface over https from now on
+# args: -
+# (Function for test scripts)
+use_agent_dmaap_https() {
+ echo -e "Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
+ export ADAPTER=$DMAAPBASE_SECURE
+ echo ""
+ return 0
}
# Turn on debug level tracing in the agent
# (Function for test scripts)
set_agent_debug() {
echo -e $BOLD"Setting agent debug"$EBOLD
- curl $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"debug"}' &> /dev/null
+ actuator="/actuator/loggers/org.oransc.policyagent"
+ if [[ $POLICY_AGENT_IMAGE = *"onap"* ]]; then
+ actuator="/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice"
+ fi
+ curlString="$LOCALHOST$POLICY_AGENT_EXTERNAL_PORT$actuator -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
+ result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
__print_err "could not set debug mode" $@
+ ((RES_CONF_FAIL++))
return 1
fi
+ echo ""
return 0
+}
+
+# Turn on trace level tracing in the agent
+# args: -
+# (Function for test scripts)
+set_agent_trace() {
+ echo -e $BOLD"Setting agent trace"$EBOLD
+ actuator="/actuator/loggers/org.oransc.policyagent"
+ if [[ $POLICY_AGENT_IMAGE = *"onap"* ]]; then
+ actuator="/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice"
+ fi
+ curlString="$LOCALHOST$POLICY_AGENT_EXTERNAL_PORT$actuator -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
+ result=$(__do_curl "$curlString")
+ if [ $? -ne 0 ]; then
+ __print_err "could not set trace mode" $@
+ ((RES_CONF_FAIL++))
+ return 1
+ fi
echo ""
+ return 0
}
# Perform curl retries when making direct call to the agent for the specified http response codes
echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
AGENT_RETRY_CODES=$@
echo ""
+ return
+}
+
+###########################
+### ECS functions
+###########################
+
+# Start the ECS
+# args: -
+# (Function for test scripts)
+start_ecs() {
+
+ echo -e $BOLD"Starting ECS"$EBOLD
+ __check_included_image 'ECS'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The ECS image has not been checked for this test run due to arg to the test script"$ERED
+ echo -e $RED"ECS will not be started"$ERED
+ exit
+ fi
+ export ECS_CERT_MOUNT_DIR="./cert"
+ __start_container ecs NODOCKERARGS $ECS_APP_NAME $ECS_EXTERNAL_PORT "/status" "http"
+}
+
+# Restart ECS
+# args: -
+# (Function for test scripts)
+restart_ecs() {
+ docker restart $ECS_APP_NAME &> ./tmp/.dockererr
+ if [ $? -ne 0 ]; then
+ __print_err "Could restart $ECS_APP_NAME" $@
+ cat ./tmp/.dockererr
+ ((RES_CONF_FAIL++))
+ return 1
+ fi
+
+ __check_container_start $ECS_APP_NAME $ECS_EXTERNAL_PORT "/status" "http"
+ echo ""
+ return 0
+}
+
+# All calls to ECS will be directed to the ECS REST interface from now on
+# args: -
+# (Function for test scripts)
+use_ecs_rest_http() {
+ echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
+ export ECS_ADAPTER=$ECS_RESTBASE
+ echo ""
+}
+
+# All calls to ECS will be directed to the ECS REST interface from now on
+# args: -
+# (Function for test scripts)
+use_ecs_rest_https() {
+ echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
+ export ECS_ADAPTER=$ECS_RESTBASE_SECURE
+ echo ""
+ return 0
+}
+
+# All calls to ECS will be directed to the ECS dmaap interface over http from now on
+# args: -
+# (Function for test scripts)
+use_ecs_dmaap_http() {
+ echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
+ export ECS_ADAPTER=$ECS_DMAAPBASE
+ echo ""
+ return 0
+}
+
+# All calls to ECS will be directed to the ECS dmaap interface over https from now on
+# args: -
+# (Function for test scripts)
+use_ecs_dmaap_https() {
+ echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
+ export ECS_ADAPTER=$ECS_DMAAPBASE_SECURE
+ echo ""
+ return 0
+}
+
+# Turn on debug level tracing in ECS
+# args: -
+# (Function for test scripts)
+set_ecs_debug() {
+ echo -e $BOLD"Setting ecs debug"$EBOLD
+ curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
+ result=$(__do_curl "$curlString")
+ if [ $? -ne 0 ]; then
+ __print_err "Could not set debug mode" $@
+ ((RES_CONF_FAIL++))
+ return 1
+ fi
+ echo ""
+ return 0
+}
+
+# Turn on trace level tracing in ECS
+# args: -
+# (Function for test scripts)
+set_ecs_trace() {
+ echo -e $BOLD"Setting ecs trace"$EBOLD
+ curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
+ result=$(__do_curl "$curlString")
+ if [ $? -ne 0 ]; then
+ __print_err "Could not set trace mode" $@
+ ((RES_CONF_FAIL++))
+ return 1
+ fi
+ echo ""
+ return 0
+}
+
+# Perform curl retries when making direct call to ECS for the specified http response codes
+# Speace separated list of http response codes
+# args: [<response-code>]*
+use_agent_retries() {
+ echo -e $BOLD"Do curl retries to the ECS REST inteface for these response codes:$@"$EBOLD
+ ECS_AGENT_RETRY_CODES=$@
+ echo ""
+ return
}
#################
# (Function for test scripts)
check_policy_agent_logs() {
- __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH
+ __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH WARN ERR
+}
+
+check_ecs_logs() {
+ __check_container_logs "ECS" $ECS_APP_NAME $ECS_LOGPATH WARN ERR
}
check_control_panel_logs() {
- __check_container_logs "Control Panel" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_LOGPATH
+ __check_container_logs "Control Panel" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_LOGPATH WARN ERR
+}
+
+check_sdnc_logs() {
+ __check_container_logs "SDNC A1 Controller" $SDNC_APP_NAME $SDNC_KARAF_LOG WARN ERROR
}
__check_container_logs() {
dispname=$1
appname=$2
logpath=$3
+ warning=$4
+ error=$5
+
echo -e $BOLD"Checking $dispname container $appname log ($logpath) for WARNINGs and ERRORs"$EBOLD
#tmp=$(docker ps | grep $appname)
echo $dispname" is not running, no check made"
return
fi
- foundentries="$(docker exec -it $tmp grep WARN $logpath | wc -l)"
+ foundentries="$(docker exec -t $tmp grep $warning $logpath | wc -l)"
if [ $? -ne 0 ];then
echo " Problem to search $appname log $logpath"
else
echo -e " Found \033[1m"$foundentries"\033[0m WARN entries in $appname log $logpath"
fi
fi
- foundentries="$(docker exec -it $tmp grep ERR $logpath | wc -l)"
+ foundentries="$(docker exec -t $tmp grep $error $logpath | wc -l)"
if [ $? -ne 0 ];then
echo " Problem to search $appname log $logpath"
else
__print_err "need one arg, <file-prefix>" $@
exit 1
fi
- echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1
+ echo -e $BOLD"Storing all container logs in $TESTLOGS/$ATC using prefix: "$1$EBOLD
+
+ docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
+
+ __check_included_image 'CONSUL'
+ if [ $? -eq 0 ]; then
+ docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
+ fi
+
+ __check_included_image 'CBS'
+ if [ $? -eq 0 ]; then
+ docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
+ body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
+ echo "$body" > $TESTLOGS/$ATC/$1_consul_config.json 2>&1
+ fi
+
+ __check_included_image 'PA'
+ if [ $? -eq 0 ]; then
+ docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
+ fi
+
+ __check_included_image 'ECS'
+ if [ $? -eq 0 ]; then
+ docker logs $ECS_APP_NAME > $TESTLOGS/$ATC/$1_ecs.log 2>&1
+ fi
+
+ __check_included_image 'CP'
+ if [ $? -eq 0 ]; then
+ docker logs $CONTROL_PANEL_APP_NAME > $TESTLOGS/$ATC/$1_control-panel.log 2>&1
+ fi
+
+ __check_included_image 'MR'
+ if [ $? -eq 0 ]; then
+ docker logs $MR_APP_NAME > $TESTLOGS/$ATC/$1_mr.log 2>&1
+ fi
+
+ __check_included_image 'CR'
+ if [ $? -eq 0 ]; then
+ docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
+ fi
- docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
- docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
- docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
- docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_control-panel.log 2>&1
- docker logs $MR_APP_NAME > $TESTLOGS/$ATC/$1_mr.log 2>&1
- docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
- docker exec -it $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
+ __check_included_image 'SDNC'
+ if [ $? -eq 0 ]; then
+ docker exec -t $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
+ fi
- docker exec -it $SDNC_ONAP_APP_NAME cat $SDNC_ONAP_KARAF_LOG > $TESTLOGS/$ATC/$1_SDNC_ONAP_karaf.log 2>&1
+ __check_included_image 'RICSIM'
+ if [ $? -eq 0 ]; then
+ rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
+ for ric in $rics; do
+ docker logs $ric > $TESTLOGS/$ATC/$1_$ric.log 2>&1
+ done
+ fi
+
+ __check_included_image 'PRODSTUB'
+ if [ $? -eq 0 ]; then
+ docker logs $PROD_STUB_APP_NAME > $TESTLOGS/$ATC/$1_prodstub.log 2>&1
+ fi
- rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
- for ric in $rics; do
- docker logs $ric > $TESTLOGS/$ATC/$1_$ric.log 2>&1
- done
- body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
- echo "$body" > $TESTLOGS/$ATC/$1_consul_config.json 2>&1
echo ""
}
###############
## Generic curl
###############
-# Generic curl function, assumed all 200-codes are ok
-# args: <url>
+# Generic curl function, assumes all 200-codes are ok
+# args: <valid-curl-args-including full url>
# returns: <returned response (without respose code)> or "<no-response-from-server>" or "<not found, <http-code>>""
# returns: The return code is 0 for ok and 1 for not ok
__do_curl() {
echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
- curlString="curl -skw %{http_code} $1"
+ curlString="curl -skw %{http_code} $@"
echo " CMD: $curlString" >> $HTTPLOG
res=$($curlString)
echo " RESP: $res" >> $HTTPLOG
http_code="${res:${#res}-3}"
if [ ${#res} -eq 3 ]; then
- echo "<no-response-from-server>"
- return 1
+ if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
+ echo "<no-response-from-server>"
+ return 1
+ else
+ echo "X2" >> $HTTPLOG
+ return 0
+ fi
else
if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
echo "<not found, resp:${http_code}>"
checkjsonarraycount=1
fi
- #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} within ${6} seconds ----"
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"
+ echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
((RES_TEST++))
start=$SECONDS
ctr=0
path=${3:5}
result="$(__do_curl $2$path)"
retcode=$?
- echo "$result" > .tmp.curl.json
- result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
+ echo "$result" > ./tmp/.tmp.curl.json
+ result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
fi
duration=$((SECONDS-start))
echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
if [ $retcode -ne 0 ]; then
if [ $duration -gt $6 ]; then
((RES_FAIL++))
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached in ${6} seconds, result = ${result} ----"
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
+ __check_stop_at_error
return
fi
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds ----"
return
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result} ----"
return
else
if [ $duration -gt $6 ]; then
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached in ${6} seconds, result = ${result} ----"
+ __check_stop_at_error
return
fi
fi
checkjsonarraycount=1
fi
- #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} ----"
echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
((RES_TEST++))
if [ $checkjsonarraycount -eq 0 ]; then
path=${3:5}
result="$(__do_curl $2$path)"
retcode=$?
- echo "$result" > .tmp.curl.json
- result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
+ echo "$result" > ./tmp/.tmp.curl.json
+ result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
fi
if [ $retcode -ne 0 ]; then
((RES_FAIL++))
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
+ __check_stop_at_error
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met"
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
- #echo -e "---- \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
else
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
- #echo -e "---- \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
+ __check_stop_at_error
fi
else
echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
### Generic test cases for varaible checking
-# Tests if a variable value in the CR is equal to a target value and and optional timeout.
-# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
-# equal to the target or not.
-# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
-# before setting pass or fail depending on if the variable value becomes equal to the target
-# value or not.
-# (Function for test scripts)
-cr_equal() {
- if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- __var_test "CR" "$LOCALHOST$CR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
- else
- ((RES_CONF_FAIL++))
- __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
- fi
-}
-
# Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
# equal to the target or not.
fi
echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD
}
-
-