TC_ONELINE_DESCR="Preparation demo setup - policy management and enrichment information"
#App names to include in the test when running docker, space separated list
-DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY"
+DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
#App names to include in the test when running kubernetes, space separated list
-KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY"
+KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY KUBEPROXY NGW"
#Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
KUBE_PRESTARTED_IMAGES=""
+#Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
+#the image is not configured in the supplied env_file
+#Used for images not applicable to all supported profile
+CONDITIONALLY_IGNORED_IMAGES="NGW"
+
#Supported test environment profiles
-SUPPORTED_PROFILES="ONAP-HONOLULU ORAN-CHERRY ORAN-DAWN"
+SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE"
#Supported run modes
SUPPORTED_RUNMODES="DOCKER KUBE"
. ../common/controller_api_functions.sh
. ../common/consul_cbs_functions.sh
. ../common/http_proxy_api_functions.sh
+. ../common/kube_proxy_api_functions.sh
+. ../common/gateway_api_functions.sh
+
+setup_testenvironment
#### TEST BEGIN ####
use_simulator_https
use_ecs_rest_https
use_prod_stub_https
-use_rapp_catalogue_http # https not yet supported
+if [ $ECS_VERSION == "V1-1" ]; then
+ use_rapp_catalogue_http # https not yet supported
+else
+ use_rapp_catalogue_https
+fi
+
if [ "$PMS_VERSION" == "V2" ]; then
- notificationurl=$CR_SERVICE_PATH"/test"
+ notificationurl=$CR_SERVICE_APP_PATH"/test"
else
echo "PMS VERSION 2 (V2) is required"
exit 1
clean_environment
+start_kube_proxy
+
STD_NUM_RICS=2
+#start_http_proxy #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
+
start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
start_mr #Just to prevent errors in the agent log...
-start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/application.properties
+start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
+
+if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
+ start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
+fi
-start_sdnc
+start_sdnc # Comment this line to run PMS with proxy
-start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/application.yaml
+start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
if [ $RUNMODE == "DOCKER" ]; then
start_consul_cbs
fi
-prepare_consul_config SDNC ".consul_config.json"
+prepare_consul_config SDNC ".consul_config.json" #Change to NOSDNC if running PMS with proxy
if [ $RUNMODE == "KUBE" ]; then
agent_load_config ".consul_config.json"
start_prod_stub
-start_ecs $SIM_GROUP/$ECS_COMPOSE_DIR/application.yaml
+start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_CONFIG_FILE
start_rapp_catalogue
set_ecs_trace
+use_info_jobs=false #Set flag if interface supporting info-types is used
+if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
+ use_info_jobs=true
+fi
+
rapp_cat_api_get_services 200 EMPTY
rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
#Check the number of types
api_equal json:policy-types 2 300
-api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_PATH/1"
+api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH/1"
# Create policies in STD
for ((i=1; i<=$STD_NUM_RICS; i++))
do
- generate_uuid
+ generate_policy_uuid
api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
- generate_uuid
+ generate_policy_uuid
api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
done
TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
-STATUS1="$CR_SERVICE_PATH/callbacks/job1-status"
-STATUS2="$CR_SERVICE_PATH/callbacks/job2-status"
+STATUS1="$CR_SERVICE_APP_PATH/callbacks/job1-status"
+STATUS2="$CR_SERVICE_APP_PATH/callbacks/job2-status"
prodstub_arm_producer 200 prod-a
prodstub_arm_type 200 prod-a type1
fi
# Check the job data in the producer
-prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+if [ $ECS_VERSION == "V1-1" ]; then
+ prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+else
+ if [ $use_info_jobs ]; then
+ prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+ else
+ prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+ fi
+fi
## Create a second job for prod-a
fi
# Check the job data in the producer
-prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+if [ $ECS_VERSION == "V1-1" ]; then
+ prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+else
+ if [ $use_info_jobs ]; then
+ prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+ else
+ prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+ fi
+fi
check_policy_agent_logs
check_ecs_logs
store_logs END
print_result
+
+auto_clean_environment
\ No newline at end of file