// : vi ts=4 sw=4 noet :
/*
==================================================================================
- Copyright (c) 2019-2020 Nokia
- Copyright (c) 2018-2020 AT&T Intellectual Property.
+ Copyright (c) 2019-2021 Nokia
+ Copyright (c) 2018-2021 AT&T Intellectual Property.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
// ------------------------------------------------------------------------------------------------
+/*
+ Opens the vlevel control file if needed and reads the vlevel from it.
+ The file is rewound if already open so that external updates are captured.
+ The current level is returnd; 0 on error.
+
+ The environment variable (ENV_VERBOSE_FILE) is used to supply the file to
+ open and read. If missing, we will try /tmp/rmr.v. We will try to open the file
+ on each call if not alrady open; this allows the value to be supplied after
+ start which helps debugging.
+
+ If close_file is true, then we will close the open vfd and return 0;
+*/
+extern int refresh_vlevel( int close_file ) {
+ static int vfd = -1;
+
+ char* eptr;
+ char wbuf[128]; // read buffer; MUST be 11 or greater
+ int vlevel = 0;
+
+ if( close_file ) {
+ if( vfd >= 0 ) {
+ close( vfd );
+ vfd = -1;
+ }
+ return 0;
+ }
+
+ if( vfd < 0 ) { // attempt to find/open on all calls if not open
+ if( (eptr = getenv( ENV_VERBOSE_FILE )) != NULL ) {
+ vfd = open( eptr, O_RDONLY );
+ } else {
+ vfd = open( "/tmp/rmr.v", O_RDONLY );
+ }
+ if( vfd < 0 ) {
+ return 0;
+ }
+ }
+
+ memset( wbuf, 0, sizeof( char ) * 11 ); // ensure what we read will be nil terminated
+ if( lseek( vfd, 0, SEEK_SET ) == 0 && read( vfd, wbuf, 10 ) > 0 ) {
+ vlevel = atoi( wbuf );
+ }
+
+ return vlevel;
+}
+
/*
Loop forever (assuming we're running in a pthread reading the static table
every minute or so.
static void* rtc_file( void* vctx ) {
uta_ctx_t* ctx; // context user has -- where we pin the route table
char* eptr;
- int vfd = -1; // verbose file des if we have one
int vlevel = 0; // how chatty we should be 0== no nattering allowed
char wbuf[256];
return NULL;
}
- if( (eptr = getenv( ENV_VERBOSE_FILE )) != NULL ) {
- vfd = open( eptr, O_RDONLY );
- }
-
ctx->flags |= CFL_NO_RTACK; // no attempt to ack when reading from a file
while( 1 ) {
- if( vfd >= 0 ) {
- wbuf[0] = 0;
- lseek( vfd, 0, 0 );
- read( vfd, wbuf, 10 );
- vlevel = atoi( wbuf );
- }
-
+ vlevel = refresh_vlevel( 0 );
read_static_rt( ctx, vlevel ); // seed the route table if one provided
if( ctx->shutdown != 0 ) { // allow for graceful termination and unit testing
+ refresh_vlevel( 1 ); // close the verbose file if open
return NULL;
}
sleep( 60 );
}
}
-static int refresh_vlevel( int vfd ) {
- int vlevel = 0;
- char rbuf[128];
-
- if( vfd >= 0 ) { // if file is open, read current value
- rbuf[0] = 0;
- lseek( vfd, 0, 0 );
- read( vfd, rbuf, 10 );
- vlevel = atoi( rbuf );
- }
-
- return vlevel;
-}
-
/*
Rtc_parse_msg parses a single message from the route manager. We allow multiple, newline terminated,
records in each message; it is required that the last record in the message be complete (we do not
}
if( vlevel > 1 ) {
- rmr_vlog_force( RMR_VL_DEBUG, "rmr_rtc: processing (%s)\n", curr );
+ rmr_vlog_force( RMR_VL_DEBUG, "rmr_rtc_parse_msg: processing (%s)\n", curr );
}
parse_rt_rec( ctx, pvt_cx, curr, vlevel, msg ); // parse record and add to in progress table; ack using rts to msg
char* tokens[128];
char wbuf[128];
int ntoks;
- int vfd = -1; // verbose file des if we have one
int vlevel = 0; // how chatty we should be 0== no nattering allowed
char* eptr;
int epfd = -1; // fd for epoll so we can multi-task
int count_delay = 30; // number of seconds between writing count info; initially every 30s
int bump_freq = 0; // time at which we will bump count frequency to every 5 minutes
int flags = 0;
+ int rt_req_freq = DEF_RTREQ_FREQ; // request frequency (sec) when wanting a new table
+ int nxt_rt_req = 0; // time of next request
if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
return NULL;
}
- if( (eptr = getenv( ENV_VERBOSE_FILE )) != NULL ) {
- vfd = open( eptr, O_RDONLY );
- vlevel = refresh_vlevel( vfd );
+ vlevel = refresh_vlevel( 0 );
+
+ if( (eptr = getenv( ENV_RTREQ_FREA )) != NULL ) {
+ rt_req_freq = atoi( eptr );
+ if( rt_req_freq < 1 || rt_req_freq > 300 ) {
+ rt_req_freq = DEF_RTREQ_FREQ;
+ rmr_vlog( RMR_VL_WARN, "rmr_rtc: RT request frequency (%d) out of range (1-300), using default (%d)\n", rt_req_freq, DEF_RTREQ_FREQ );
+ }
}
+ rmr_vlog( RMR_VL_INFO, "rmr_rtc: RT request frequency set to: %d seconds", rt_req_freq );
ctx->flags |= CFL_NO_RTACK; // don't ack when reading from a file
read_static_rt( ctx, vlevel ); // seed the route table if one provided
blabber = 0;
while( 1 ) { // until the cows return, pigs fly, or somesuch event likely not to happen
while( msg == NULL || msg->len <= 0 ) { // until we actually have something from the other side
- if( (flags & RTCFL_HAVE_UPDATE) == 0 ) { // no route table updated from rt mgr; request one
+ if( (flags & RTCFL_HAVE_UPDATE) == 0 && time( NULL ) >= nxt_rt_req ) { // no route table updated from rt mgr; request one
if( ctx->rtg_whid < 0 ) {
ctx->rtg_whid = rmr_wh_open( pvt_cx, rtg_addr );
}
send_update_req( pvt_cx, ctx );
+ nxt_rt_req = time( NULL ) + rt_req_freq;
}
msg = rmr_torcv_msg( pvt_cx, msg, 1000 );
if( time( NULL ) > blabber ) {
- vlevel = refresh_vlevel( vfd );
+ vlevel = refresh_vlevel( 0 );
+ blabber = time( NULL ) + count_delay; // set next time to blabber, then do so
+ if( blabber > bump_freq ) {
+ count_delay = 300;
+ }
if( vlevel >= 0 ) { // allow it to be forced off with -n in verbose file
- blabber = time( NULL ) + count_delay; // set next time to blabber, then do so
- if( blabber > bump_freq ) {
- count_delay = 300;
- }
rt_epcounts( ctx->rtable, ctx->my_name );
}
}
if( ctx->shutdown != 0 ) {
break; // mostly for unit test, but allows a forced stop
}
+
+ // extra housekeeping chores can be added here...
+ alarm_if_drops( ctx, pvt_cx ); // send an alarm if message are dropping, clear if we set one and thtings are better
}
- vlevel = refresh_vlevel( vfd ); // ensure it's fresh when we get a message
+ vlevel = refresh_vlevel( 0 ); // ensure it's fresh when we get a message
if( msg != NULL && msg->len > 0 ) {
rtc_parse_msg( ctx, pvt_cx, msg, vlevel, &flags );
int pbuf_size = 0; // number allocated in pbuf
int ntoks;
int raw_interface = 1; // rtg is using raw NNG/Nano not RMr to send updates
- int vfd = -1; // verbose file des if we have one
int vlevel = 0; // how chatty we should be 0== no nattering allowed
char* eptr;
int epfd = -1; // fd for epoll so we can multi-task
return NULL;
}
- if( (eptr = getenv( ENV_VERBOSE_FILE )) != NULL ) {
- vfd = open( eptr, O_RDONLY );
- vlevel = refresh_vlevel( vfd );
- }
-
+ vlevel = refresh_vlevel( 0 );
read_static_rt( ctx, vlevel ); // seed the route table if one provided
if( (port = getenv( ENV_RTG_PORT )) == NULL || ! *port ) { // port we need to open to listen for RTG connections
port = strdup( port );
}
-/*
- this test is now done in init and this function is started _only_ if the value was 1
- if( (curr = getenv( ENV_RTG_RAW )) != NULL ) {
- raw_interface = atoi( curr ) > 0; // if > 0 we assume that rtg messages are NOT coming from an RMr based process
- }
-*/
-
fport = port; // must hold to free
ntoks = uta_tokenise( port, tokens, 120, ':' ); // assume tcp:port, but it could be port or old style host:port
}
if( time( NULL ) > blabber ) {
- vlevel = refresh_vlevel( vfd );
+ vlevel = refresh_vlevel( 0 );
if( vlevel >= 0 ) { // allow it to be forced off with -n in verbose file
blabber = time( NULL ) + count_delay; // set next time to blabber, then do so
if( blabber > bump_freq ) {
rt_epcounts( ctx->rtable, ctx->my_name );
}
}
+
+ alarm_if_drops( ctx ); // send an alarm if message are dropping, clear if we set one and thtings are better
}
- vlevel = refresh_vlevel( vfd ); // ensure it's fresh when we get a message
+ vlevel = refresh_vlevel( 0 ); // ensure it's fresh when we get a message
if( msg != NULL && msg->len > 0 ) {
payload = msg->payload;