rbCb->lch.lChType == CM_LTE_LCH_PCCH )
{
sdu->mode.tm.sfn = datReqInfo->tm.tmg.sfn;
- sdu->mode.tm.subframe = datReqInfo->tm.tmg.subframe;
+ sdu->mode.tm.slot = datReqInfo->tm.tmg.slot;
#ifdef EMTC_ENABLE
if(rbCb->lch.lChType == CM_LTE_LCH_PCCH)
{
CM_LLIST_FIRST_NODE(&(rbCb->m.tm.sduQ),
node);
- /* (Sfn,subframe) at which the message should be transmitted is
- * validated with alloted (sfn,subframe)in the MAC layer */
+ /* (Sfn,slot) at which the message should be transmitted is
+ * validated with alloted (sfn,slot)in the MAC layer */
while (node != NULLP)
{
sdu = (KwSdu *)(node->node);
if ( rbCb->lch.lChType == CM_LTE_LCH_BCCH ||
rbCb->lch.lChType == CM_LTE_LCH_PCCH )
{
- U16 sfn, subframe;
+ U16 sfn, slot;
/* MS_FIX: syed sfn is of 10 bytes rather than 8 */
#ifdef EMTC_ENABLE
- /* As part of CATM feature cross subframe scheduling is implemented , so there is some delta(currently 2)
+ /* As part of CATM feature cross slot scheduling is implemented , so there is some delta(currently 2)
between MPDCCH and PDSCH,RLC expects cell crntTime of transmission of control dlsf, so one extra
- information is provided in staInd, so that sfn,subframe should calculate from paging Timing information
+ information is provided in staInd, so that sfn,slot should calculate from paging Timing information
in case of EMTC paging, instead of transId */
if(staInd->isEmtcPaging)
{
sfn = staInd->pagingTimingInfo.sfn;
- subframe = staInd->pagingTimingInfo.subframe;
+ slot = staInd->pagingTimingInfo.slot;
}
else
#endif
{
sfn = (staInd->transId >> 8) & 0x3FF;
- subframe = staInd->transId & 0xFF;
+ slot = staInd->transId & 0xFF;
}
/* Table
- * tm.subframe - current subframe
+ * tm.slot - current slot
* 0,sfn 7,sfn-1
* 4,sfn 1,sfn
* 5,sfn 2,sfn
* Take care of SFN wraparound. TODO: It is better for RLC
* not to be aware of SCH DELTAs. So we should look for
* sending actual transmission time to RLC. */
- if ((subframe + TFU_DELTA) >= 10)
+ if ((slot + TFU_DELTA) >= 10)
{
sfn = (sfn + 1)%1024;
}
if ((sdu->mode.tm.sfn != sfn) ||
- (sdu->mode.tm.subframe != ((subframe+TFU_DELTA)%10)))
+ (sdu->mode.tm.slot != ((slot+TFU_DELTA)%10)))
{
node = node->next;
RLOG_ARG4(L_DEBUG,DBG_RBID,rbCb->rlcId.rbId,
rbCb->rlcId.ueId,
rbCb->rlcId.cellId);
RLOG_ARG4(L_DEBUG,DBG_RBID,rbCb->rlcId.rbId,
- "sfn %d subframe %d UEID:%d CELLID:%d",
+ "sfn %d slot %d UEID:%d CELLID:%d",
sfn,
- subframe,
+ slot,
rbCb->rlcId.ueId,
rbCb->rlcId.cellId);
cmLListDelFrm(&(rbCb->m.tm.sduQ), &sdu->lstEnt);
#endif /* ERRCLASS & ERRCLS_ADD_RES */
dlData->timeToTx.sfn = sdu->mode.tm.sfn;
- dlData->timeToTx.subframe = sdu->mode.tm.subframe;
+ dlData->timeToTx.slot = sdu->mode.tm.slot;
dlData->cellId = rbCb->rlcId.cellId;
dlData->rnti = sdu->mode.tm.rnti;
dlData->nmbPdu = 1;