-
#
#==================================================================================
-# Copyright (c) 2019 Nokia
+# Copyright (c) 2019 Nokia
# Copyright (c) 2018-2019 AT&T Intellectual Property.
#
# Licensed under the Apache License, Version 2.0 (the "License");
#==================================================================================
#
+# This CMake definition supports several -D command line options:
+#
+# -DDEBUG=n Enable debugging level n
+# -DDEV_PKG=1 Development package configuration
+# -DBUILD_DOC=1 Man pages generated
+# -DBUILD_NNG=1 Enable building of NNG and the RMR NNG based libraries
+# -DIGNORE_LIBDIR=1 Installation of rmr libries is into /usr/local/lib and ignores
+# value in CMAKE_INSTALL_LIBDIR.
+# system preferred (typically /usr/local/lib64).
+# -DPRESERVE_PTYPE=1 Do not change the processor type when naming deb packages
+# -DPACK_EXTERNALS=1 Include external libraries used to build in the run-time package
+# (This makes some stand-alone unit testing of bindings possible, it
+# is not meant to be used for production package generation.)
+# -DGPROF=1 Enable profiling compile time flags
+# -DSKIP_EXTERNALS=1 Do not use NNG submodule when building; uee installed packages
+# -DMAN_PREFIX=<path> Supply a path where man pages are installed (default: /usr/share/man)
+
+# See ci/build_all for an example of how to build and test
+
project( rmr LANGUAGES C )
cmake_minimum_required( VERSION 3.5 )
-
-set( major_version "1" )
-set( minor_version "0" )
-set( patch_level "15" )
+set( major_version "4" ) # should be automatically populated from git tag later, but until CI process sets a tag we use this
+set( minor_version "2" )
+set( patch_level "0" )
set( install_root "${CMAKE_INSTALL_PREFIX}" )
-set( install_lib "lib" )
set( install_inc "include/rmr" )
if( MAN_PREFIX )
set( install_man ${MAN_PREFIX} ) # is there a cmake var for this -- can't find one
set( install_man "/usr/share/man" ) # this needs to be fixed so it's not hard coded
endif()
-# Must use GNUInstallDirs to install libraries into correct
-# locations on all platforms.
+# Must use GNUInstallDirs to install libraries into correct locations on all platforms.
include( GNUInstallDirs )
-if( NOT BUILD_LIB )
- set( BUILD_LIB lib )
+# We install using LIBDIR as established by the gnu include; it varies from system
+# to system, and we don't trust that it is always set, so we default to lib if it is missing.
+#
+if( NOT CMAKE_INSTALL_LIBDIR )
+ set( CMAKE_INSTALL_LIBDIR "lib" )
+endif()
+
+if( IGNORE_LIBDIR ) # if set, then force to lib otherwise use "system preference"
+ set( install_lib "lib" )
+else()
+ set( install_lib "${CMAKE_INSTALL_LIBDIR}" )
endif()
+unset(IGNORE_LIBDIR CACHE ) # we don't want this to persist
+message( "+++ RMR library install target directory: ${install_lib}" )
-# ---------------- set version info (not perfect, but better than nothing) ----
-execute_process(
- COMMAND bash -c "git rev-parse --short HEAD|awk '{printf\"%s\", $0}'"
+# ---------------- extract some things from git ------------------------------
+
+# commit id for the version string
+execute_process(
+ COMMAND bash -c "git rev-parse --short HEAD|awk '{printf\"%s\", $0}'"
OUTPUT_VARIABLE git_id
)
-add_definitions(
- -DGIT_ID=${git_id}
+# version information for library names and version string
+execute_process(
+ COMMAND bash -c "git describe --tags --abbrev=0 HEAD 2>/dev/null | awk -v tag=0.0.4095 ' { tag=$1 } END{ print tag suffix }'|sed 's/\\./;/g' "
+ OUTPUT_VARIABLE mmp_version_str
+ ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+message( "+++ mmp version from tag: '${mmp_version_str}'" )
+
+# extra indicator to show that the build was based on modified file(s) and not the true commit
+# (no hope of reproducing the exact library for debugging). Used only for the internal version
+# string.
+execute_process(
+ COMMAND bash -c "git diff --shortstat|awk -v fmt=%s -v r=-rotten '{ s=r } END { printf( fmt, s ) }'"
+ OUTPUT_VARIABLE spoiled_str
+)
+
+# uncomment these lines once CI starts adding a tag on merge
+#set( mmp_version ${mmp_version_str} )
+#list( GET mmp_version 0 major_version )
+#list( GET mmp_version 1 minor_version )
+#list( GET mmp_version 2 patch_level )
+
+if( DEBUG ) # if set, we'll set debugging on in the compile
+ set( debugging ${DEBUG} )
+ message( "+++ debugging is being set to ${DEBUG}" )
+else()
+ set( debugging 0 )
+ message( "+++ debugging is set to off" )
+endif()
+unset( DEBUG CACHE ) # we don't want this to persist
+
+
+# define constants used in the version string, debugging, etc.
+add_definitions(
+ -DGIT_ID=${git_id}
-DMAJOR_VER=${major_version}
-DMINOR_VER=${minor_version}
-DPATCH_VER=${patch_level}
+ -DDEBUG=${debugging}
)
+# ---------------- suss out pkg gen tools so we don't fail generating packages that the system cannot support --------------
-# ---------------- setup nano/nng things ---------------------------------------
-if( NOT SKIP_EXTERNALS )
- set( need_ext 1 ) # we force dependences on these for right build order
- execute_process( COMMAND git submodule update --init -- ext/nng
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- )
-
- execute_process( COMMAND git submodule update --init -- ext/nanomsg
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- )
- if( NOT EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/ext/nng/CMakeLists.txt )
- message( FATAL_ERROR "cannot find nng in our git source as a submodule: Giving up" ) # this will abort which seems wrong, but tdam.
- endif()
-
- include( ExternalProject )
- ExternalProject_Add(
- ext_nng
- SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/ext/nng"
- CMAKE_ARGS "-DBUILD_SHARED_LIBS=1"
- CMAKE_ARGS "-DCMAKE_INSTALL_PREFIX=${CMAKE_CURRENT_BINARY_DIR}"
- BUILD_COMMAND "make"
- UPDATE_COMMAND ""
- TEST_COMMAND ""
- STEP_TARGETS build
- )
- ExternalProject_Add(
- nanomsg
- SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/ext/nanomsg"
- BUILD_COMMAND "make"
- UPDATE_COMMAND ""
- CMAKE_ARGS "-DCMAKE_INSTALL_PREFIX=${CMAKE_CURRENT_BINARY_DIR}"
- TEST_COMMAND ""
- STEP_TARGETS build
- )
-
- # it seems impossible to install everything that lands in {bin}/lib, so we need to
- # hard code (shudder) some things. Even worse, we have to make exceptions for
- # builds on apple (osx) since their naming convention wandered off the path.
- set( nng_major 1 )
- set( nng_minor 1.0 )
- set( nano_major 5 )
- set( nano_minor 1.0 )
- set( so ${CMAKE_SHARED_LIBRARY_SUFFIX} ) # cmake variables are impossibly long :(
- if( NOT APPLE ) # probably breaks in windows, but idc
- set( nng_so_suffix ${so} )
- set( nng_so_suffix_m ${so}.${nng_major} )
- set( nng_so_suffix_mm ${so}.${nng_major}.${nng_minor} )
-
- set( nano_so_suffix ${so} )
- set( nano_so_suffix_m ${so}.${nano_major} )
- set( nano_so_suffix_mm ${so}.${nano_major}.${nano_minor} )
+# deb packages use underbars, and package manager(s) seem to flip the *_64 processor type
+# to the old (non-standard) amd64 string, so we do it here for consistency. Set -DPRESERVE_PTYPE=1
+# to prevent the flip. RPM packages will always be given the system generated processor type string.
+#
+if( ${CMAKE_SYSTEM_PROCESSOR} MATCHES "x86_64" )
+ if( NOT PRESERVE_PTYPE )
+ set( deb_sys_name "amd64" )
else()
- # of course apple puts versions before the suffix :(
- set( nng_so_suffix ${so} ) # so has a lead dot, so NOT needed
- set( nng_so_suffix_m ".${nng_major}${so}" ) # these need leading dots
- set( nng_so_suffix_mm ".${nng_major}.${nng_minor}${so}" )
-
- set( nano_so_suffix ${so} )
- set( nano_so_suffix_m ".${nano_major}${so}" )
- set( nano_so_suffix_mm ".${nano_major}.${nano_minor}${so}" )
+ set( deb_sys_name ${CMAKE_SYSTEM_PROCESSOR} )
endif()
+else()
+ set( deb_sys_name ${CMAKE_SYSTEM_PROCESSOR} )
+endif()
+unset( PRESERVE_PTYPE CACHE ) # we don't want this to persist
+
+set( rpm_sys_name ${CMAKE_SYSTEM_PROCESSOR} )
+
+if( DEV_PKG )
+ set( deb_pkg_name "rmr-dev" )
+ set( rpm_pkg_name "rmr-devel" )
+else()
+ set( deb_pkg_name "rmr" )
+ set( rpm_pkg_name "rmr" )
+endif()
+
+set( pkg_label "rmr${spoiled_str}-${major_version}.${minor_version}.${patch_level}-${sys_name}" )
+set( rpm_pkg_label "${rpm_pkg_name}${spoiled_str}-${major_version}.${minor_version}.${patch_level}-${rpm_sys_name}" )
+set( deb_pkg_label "${deb_pkg_name}${spoiled_str}_${major_version}.${minor_version}.${patch_level}_${deb_sys_name}" )
+message( "+++ pkg name: ${deb_pkg_label}.deb" )
- message( "+++ installing nano/nng with: ${nano_major}.${nano_minor} | ${nng_major}.${nng_minor}" )
+#set( out_yml /tmp/build_output.yml ) # we will record package names (we record only untainted names)
+find_program( rpm NAMES rpmbuild ) # rpm package gen requires this to be installed
+
+set( gen_rpm 0 )
+if( "${rpm}" MATCHES "rpm-NOTFOUND" ) # cannot build rpm
+ set( pkg_list "DEB" )
+ message( "### make package will generate only deb package; cannot find support to generate rpm packages" )
+else()
+ message( "+++ pkg name: ${rpm_pkg_label}.rpm" ) # debugging if we think we can gen rpm too
+ set( pkg_list "DEB;RPM" )
+ set( gen_rpm 1 )
+ message( "+++ make package will generate both deb and rpm packages" )
+endif()
+
+# ---------------- setup nano/nng things ---------------------------------------
+if( NOT BUILD_NNG )
+ set( PACK_EXTERNALS 0 )
else()
- set( need_ext 0 )
+ if( NOT SKIP_EXTERNALS )
+ set( need_ext 1 ) # we force dependences on these for right build order
+ execute_process( COMMAND git submodule update --init -- ext/nng
+ WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+ )
+
+ if( NOT EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/ext/nng/CMakeLists.txt )
+ message( FATAL_ERROR "cannot find nng in our git source as a submodule: Giving up" ) # this will abort which seems wrong, but tdam.
+ endif()
+
+ include( ExternalProject )
+ ExternalProject_Add(
+ ext_nng
+ SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/ext/nng"
+ CMAKE_ARGS "-DBUILD_SHARED_LIBS=1"
+ CMAKE_ARGS "-DCMAKE_INSTALL_PREFIX=${CMAKE_CURRENT_BINARY_DIR}"
+ BUILD_COMMAND "make"
+ UPDATE_COMMAND ""
+ TEST_COMMAND ""
+ STEP_TARGETS build
+ )
+
+ # it seems impossible to install everything that lands in {bin}/lib, so we need to
+ # hard code (shudder) some things. Even worse, we have to make exceptions for
+ # builds on apple (osx) since their naming convention wandered off the path.
+ set( nng_major 1 )
+ set( nng_minor 1.0 )
+ set( so ${CMAKE_SHARED_LIBRARY_SUFFIX} ) # cmake variables are impossibly long :(
+ if( NOT APPLE ) # probably breaks in windows, but idc
+ set( nng_so_suffix ${so} )
+ set( nng_so_suffix_m ${so}.${nng_major} )
+ set( nng_so_suffix_mm ${so}.${nng_major}.${nng_minor} )
+ else()
+ # of course apple puts versions before the suffix :(
+ set( nng_so_suffix ${so} ) # so has a lead dot, so NOT needed
+ set( nng_so_suffix_m ".${nng_major}${so}" ) # these need leading dots
+ set( nng_so_suffix_mm ".${nng_major}.${nng_minor}${so}" )
+ endif()
+
+ message( "+++ building with nng: ${nng_major}.${nng_minor}" )
+ else()
+ if( PACK_EXTERNALS )
+ # This makes some stand-alone unit testing possible for bindings and transport layer testing;
+ # it is not meant for production packages.
+ #
+ unset( SKIP_EXTERNALS CACHE ) # must remove so as not to trap user into a never ending failure
+ unset( PACK_EXTERNALS CACHE )
+ message( FATAL_ERROR "ERROR: PACK_EXTERNALS can be set only if SKIP_EXTERNALS is unset (=0, or not supplied on command line)" )
+ endif()
+ set( need_ext 0 )
+ endif()
endif()
-unset( SKIP_EXTERNALS CACHE ) # prevent it from being applied next build unless specifically set on comd line
+
# this gets us round a chicken/egg problem. include files don't exist until make is run
# Compiler flags
#
set( CMAKE_POSITION_INDEPENDENT_CODE ON )
-set( CMAKE_CXX_FLAGS "-g -Wall " )
+#set( CMAKE_C_FLAGS "-g -Wall " )
+#set( CMAKE_C_FLAGS "-g " )
+if( GPROF ) # if set, we'll set profiling flag on compiles
+ message( "+++ profiling is on" )
+ set( CMAKE_C_FLAGS "-pg " )
+else()
+ message( "+++ profiling is off" )
+ set( CMAKE_C_FLAGS "-g " )
+endif()
+unset( GPROF CACHE ) # we don't want this to persist
# Include modules
-add_subdirectory( src/common )
-add_subdirectory( src/nanomsg )
-add_subdirectory( src/nng )
+add_subdirectory( src/rmr/common )
+if( BUILD_NNG )
+ add_subdirectory( src/rmr/nng )
+endif()
+add_subdirectory( src/rmr/si )
add_subdirectory( doc ) # this will auto skip if {X}fm is not available
-# shared and static libraries built from the same object files
-# Nanomsg based library (librmr )
-# library is built by pulling object files from nano and common subdirs
+# shared and static libraries are built from the same object files.
+# librmr_* is a combination of common and * specific rmr functions.
#
-add_library( rmr_shared SHARED "$<TARGET_OBJECTS:nano_objects>;$<TARGET_OBJECTS:common_objects>" )
-add_library( rmr_static STATIC "$<TARGET_OBJECTS:nano_objects>;$<TARGET_OBJECTS:common_objects>" )
-# both libraries to be named with librmr prefix
-set_target_properties( rmr_shared PROPERTIES OUTPUT_NAME "rmr" )
-set_target_properties( rmr_static PROPERTIES OUTPUT_NAME "rmr" )
+if( BUILD_NNG )
+ add_library( rmr_nng_shared SHARED "$<TARGET_OBJECTS:nng_objects>;$<TARGET_OBJECTS:common_objects>" )
+ set_target_properties( rmr_nng_shared
+ PROPERTIES
+ OUTPUT_NAME "rmr_nng"
+ SOVERSION ${major_version}
+ VERSION ${major_version}.${minor_version}.${patch_level} )
+
+ # we only build/export the static archive (.a) if generating a dev package
+ if( DEV_PKG )
+ add_library( rmr_nng_static STATIC "$<TARGET_OBJECTS:nng_objects>;$<TARGET_OBJECTS:common_objects>" )
+ set_target_properties( rmr_nng_static
+ PROPERTIES
+ OUTPUT_NAME "rmr_nng"
+ SOVERSION ${major_version}
+ VERSION ${major_version}.${minor_version}.${patch_level} )
+ endif()
+endif()
+add_library( rmr_si_shared SHARED "$<TARGET_OBJECTS:rmr_si_objects>;$<TARGET_OBJECTS:common_objects>" )
+set_target_properties( rmr_si_shared
+ PROPERTIES
+ OUTPUT_NAME "rmr_si"
+ SOVERSION ${major_version}
+ VERSION ${major_version}.${minor_version}.${patch_level} )
-# NNG based library (librmr_nng )
-# library is built by pulling objects from nng and common subdirs
+# even if not generating a development package we still need to generate the .a so that health check
+# can link against it to avoid RPM install issues.
#
-add_library( rmr_nng_shared SHARED "$<TARGET_OBJECTS:nng_objects>;$<TARGET_OBJECTS:common_objects>" )
-add_library( rmr_nng_static STATIC "$<TARGET_OBJECTS:nng_objects>;$<TARGET_OBJECTS:common_objects>" )
+add_library( rmr_si_static STATIC "$<TARGET_OBJECTS:rmr_si_objects>;$<TARGET_OBJECTS:common_objects>" )
+set_target_properties( rmr_si_static
+ PROPERTIES
+ OUTPUT_NAME "rmr_si"
+ SOVERSION ${major_version}
+ VERSION ${major_version}.${minor_version}.${patch_level} )
+
+if( BUILD_NNG )
+ # if externals need to be built, then we must force them to be built first by depending on them
+ if( need_ext )
+ if( DEV_PKG )
+ add_dependencies( rmr_nng_shared;rmr_nng_static ext_nng )
+ else()
+ add_dependencies( rmr_nng_shared ext_nng )
+ endif()
+ endif()
+endif()
+# ------------- testing -------------------------------------------------------
+enable_testing()
+# cmake cannot set env vars, so we have to passed desired vars on the wrapper command
+add_test(
+ NAME drive_unit_tests
+ COMMAND bash ../test/run_unit_tests.sh CMBUILD=${CMAKE_CURRENT_BINARY_DIR}
+ WORKING_DIRECTORY ../test
+)
+# cmake seems unable to start test/app_test/run_all.ksh, so we have to lump
+# a dummy script in ./test that does the obvious thing.
+add_test(
+ NAME drive_app
+ COMMAND bash ./run_app_tests.sh LD_LIBRARY_PATH=${install_root}/lib C_INCLUDE_PATH=${install_root}/include CMBUILD=${CMAKE_CURRENT_BINARY_DIR}
+ WORKING_DIRECTORY ../test
+)
-# if externals need to be built, then we must force them to be built first by depending on them
-if( need_ext )
- add_dependencies( rmr_static;rmr_shared nanomsg )
- add_dependencies( rmr_nng_shared;rmr_nng_static ext_nng )
-endif()
+# --- support binaries that depend on the libs identified above ---------------
+add_subdirectory( src/support )
-# both libraries to be named with librmr_nng prefix
-#
-set_target_properties( rmr_nng_shared PROPERTIES OUTPUT_NAME "rmr_nng" )
-set_target_properties( rmr_nng_static PROPERTIES OUTPUT_NAME "rmr_nng" )
+# ------------- packaging -----------------------------------------------------
#
-if( APPLE )
- message( "### apple hack: forcing hard coded library paths for nng/nano dynamic libraries" )
- target_link_libraries( rmr_shared ${CMAKE_CURRENT_BINARY_DIR}/lib/libnanomsg${nano_so_suffix} )
- target_link_libraries( rmr_nng_shared ${CMAKE_CURRENT_BINARY_DIR}/lib/libnng${nng_so_suffix} )
+if( BUILD_NNG )
+ if( APPLE )
+ message( "### apple hack: forcing hard coded library paths for nng/nano dynamic libraries" )
+ target_link_libraries( rmr_nng_shared ${CMAKE_CURRENT_BINARY_DIR}/lib/libnng${nng_so_suffix} )
+ endif()
endif()
-# Define directories where package should drop things when installed
-# In CMake speak archive == *.a library == *.so, so both are needed
-# Headers from the common directory are forced to install by the local CM file in common. At
-# the moment, there are no header files specific to either nano or nng, so to the public
-# header directive is moot, but needed if some day there is one.
+# Define what should be installed, and where they should go. For dev package we install
+# only the RMr headers, man pages and archive (.a) files. The run-time package gets just
+# the library (.so) files and nothing more.
#
-install( TARGETS rmr_nng_shared;rmr_nng_static;rmr_shared;rmr_static EXPORT LibraryConfig
- ARCHIVE DESTINATION ${install_lib}
- LIBRARY DESTINATION ${install_lib}
- PUBLIC_HEADER DESTINATION ${install_inc}
+if( BUILD_NNG )
+ if( DEV_PKG )
+ set( target_list "rmr_nng_static;rmr_si_static" )
+ else()
+ set( target_list "rmr_nng_shared;rmr_si_shared" )
+ endif()
+else()
+ if( DEV_PKG )
+ set( target_list "rmr_si_static" )
+ else()
+ set( target_list "rmr_si_shared" )
+ endif()
+endif()
+
+install( TARGETS ${target_list} EXPORT LibraryConfig
+ LIBRARY DESTINATION ${install_lib}
+ ARCHIVE DESTINATION ${install_lib}
+ PUBLIC_HEADER DESTINATION ${install_inc}
)
+unset( DEV_PKG CACHE ) # prevent from being a hidden setting if user redoes things
-# install any nano/nng libraries in to the deb as well, but ONLY if we created them.
-# (sure would be nice if FILEs allowed for globbing; sadlyy it does not.
+# install any nano/nng libraries in to the deb as well, but ONLY if asked for on the 'cmake ..' command
+# (sure would be nice if FILEs allowed for globbing; sadly it does not.) Disabled by default if BUILD_NNG
+# is turned off.
#
-if( need_ext )
- message( "including nano and nng libraries in the deb" )
+if( PACK_EXTERNALS )
+ message( "+++ including nano and nng libraries in the deb" )
install( FILES
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnanomsg${nano_so_suffix}
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnanomsg${nano_so_suffix_m}
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnanomsg${nano_so_suffix_mm}
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnng${nng_so_suffix}
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnng${nng_so_suffix_m}
- ${CMAKE_CURRENT_BINARY_DIR}/${BUILD_LIB}/libnng${nng_so_suffix_mm}
+ ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_INSTALL_LIBDIR}/libnng${nng_so_suffix}
+ ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_INSTALL_LIBDIR}/libnng${nng_so_suffix_m}
+ ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_INSTALL_LIBDIR}/libnng${nng_so_suffix_mm}
DESTINATION ${install_lib}
)
endif()
+unset( SKIP_EXTERNALS CACHE ) # prevent these from being applied next build unless specifically set on comd line
+unset( PACK_EXTERNALS CACHE )
IF( EXISTS "${CMAKE_ROOT}/Modules/CPack.cmake" )
include( InstallRequiredSystemLibraries )
+ set( CPACK_DEBIAN_PACKAGE_NAME ${deb_pkg_name} )
+ set( CPACK_RPM_PACKAGE_NAME ${rpm_pkg_name} )
+
+ # auto dependency checking makes the RPM install fail, see NOTES
+ set( CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION="/usr/local /usr/local/bin /usr/local/lib" )
+
set( CPACK_set_DESTDIR "on" )
set( CPACK_PACKAGING_INSTALL_PREFIX "${install_root}" )
- set( CPACK_GENERATOR "DEB" )
+ set( CPACK_GENERATOR "${pkg_list}" )
set( CPACK_PACKAGE_DESCRIPTION "Thin library for RIC xAPP messaging routed based on message type." )
set( CPACK_PACKAGE_DESCRIPTION_SUMMARY "RIC message routing library" )
set( CPACK_PACKAGE_VERSION_MAJOR "${major_version}" )
set( CPACK_PACKAGE_VERSION_MINOR "${minor_version}" )
set( CPACK_PACKAGE_VERSION_PATCH "${patch_level}" )
- set( CPACK_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}_${major_version}.${minor_version}.${CPACK_PACKAGE_VERSION_PATCH}" )
- set( CPACK_SOURCE_PACKAGE_FILE_NAME "vric${CMAKE_PROJECT_NAME}_${major_version}.${minor_version}.${CPACK_PACKAGE_VERSION_PATCH}" )
+ set( CPACK_PACKAGE "${pkg_label}" ) # generic name for old versions of cpack
+ set( CPACK_DEBIAN_FILE_NAME "${deb_pkg_label}.deb" )
+ set( CPACK_RPM_FILE_NAME "${rpm_pkg_label}.rpm" )
- # we build and ship the libraries, so there is NO dependency
- #set( CPACK_DEBIAN_PACKAGE_DEPENDS "nanomsg ( >= 1.1.4 ), nng ( >= 1.1.1 )" )
+ # there is not an NNG package, so we cannot define a dependency
set( CPACK_DEBIAN_PACKAGE_PRIORITY "optional" )
set( CPACK_DEBIAN_PACKAGE_SECTION "ric" )
set( CPACK_DEBIAN_ARCHITECTURE ${CMAKE_SYSTEM_PROCESSOR} )
+ set( CPACK_RPM_ARCHITECTURE ${CMAKE_SYSTEM_PROCESSOR} )
# this seems ingnored if included
#set( CPACK_COMPONENTS_ALL Libraries ApplicationData )