2 # this has been hacked to work with bash; ksh is preferred
4 #==================================================================================
5 # Copyright (c) 2019 Nokia
6 # Copyright (c) 2018-2019 AT&T Intellectual Property.
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
12 # http://www.apache.org/licenses/LICENSE-2.0
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #==================================================================================
23 # Mnemonic: unit_test.ksh
24 # Abstract: Execute unit test(s) in the directory and produce a more
25 # meaningful summary than gcov gives by default (exclude
26 # coverage on the unit test functions).
28 # Test files must be named *_test.c, or must explicitly be
29 # supplied on the command line. Functions in the test
30 # files will not be reported on provided that they have
31 # their prototype (all on the SAME line) as:
32 # static type name() {
34 # Functions with coverage less than 80% will be reported as
35 # [LOW] in the output. A file is considered to pass if the
36 # overall execution percentage for the file is >= 80% regardless
37 # of the number of functions that reported low.
39 # Test programmes are built prior to execution. Plan-9 mk is
40 # the preferred builder, but as it's not widly adopted (sigh)
41 # make is assumed and -M will shift to Plan-9. Use -C xxx to
42 # invoke a customised builder.
44 # For a module which does not pass, we will attempt to boost
45 # the coverage by discounting the unexecuted lines which are
46 # inside of if() statements that are checking return from
47 # (m)alloc() calls or are checking for nil pointers as these
48 # cases are likely impossible to drive. When discount testing
49 # is done both the failure message from the original analysis
50 # and a pass/fail message from the discount test are listed,
51 # but only the result of the discount test is taken into
52 # consideration with regard to overall success.
55 # By default the overall state is based only on the success
56 # or failure of the unit tests and NOT on the perceived
57 # state of coverage. If the -s (strict) option is given, then
58 # overall state will be failure if code coverage expectations
61 # Date: 16 January 2018
62 # Author: E. Scott Daniels
63 # -------------------------------------------------------------------------
66 echo "usage: $0 [-G|-M|-C custom-command-string] [-a] [-c cov-target] [-f] [-F] [-v] [-x] [files]"
67 echo " if -C is used to provide a custom build command then it must "
68 echo " contain a %s which will be replaced with the unit test file name."
69 echo ' e.g.: -C "mk -a %s"'
70 echo " -a always run coverage (even on failed modules)"
71 echo " -c allows user to set the target coverage for a module to pass; default is 80"
72 echo " -f forces a discount check (normally done only if coverage < target)"
73 echo " -F show only failures at the function level"
74 echo " -s strict mode; code coverage must also pass to result in a good exit code"
75 echo " -v will write additional information to the tty and save the disccounted file if discount run or -f given"
76 echo " -x generates the coverage XML files for Sonar (implies -f)"
79 # read through the given file and add any functions that are static to the
80 # ignored list. Only test and test tools files should be parsed.
82 function add_ignored_func {
85 echo ">>>> can't find file to ignore: $1"
91 grep "^static.*(.*).*{" $1 | awk ' # get list of test functions to ignore
95 if( $2 == "struct" ) { # static struct goober function
98 printf( "%s ", $3 ) # static goober-type funct
103 iflist="$iflist $goop" # this goop hack because bash can't read from a loop
107 # Merge two coverage files to preserve the total lines covered by different
111 if [[ -z $1 || -z $2 ]]
116 if [[ ! -e $1 || ! -e $2 ]]
133 if( executed[line] ) {
134 $1 = sprintf( "%9d:", executed[line] )
146 executed[line] = $1+0
153 # Parse the .gcov file and discount any unexecuted lines which are in if()
154 # blocks that are testing the result of alloc/malloc calls, or testing for
155 # nil pointers. The feeling is that these might not be possible to drive
156 # and shoudn't contribute to coverage deficiencies.
158 # In verbose mode, the .gcov file is written to stdout and any unexecuted
159 # line which is discounted is marked with ===== replacing the ##### marking
162 # The return value is 0 for pass; non-zero for fail.
163 function discount_an_checks {
166 mct=$( get_mct ${1%.gcov} ) # see if a special coverage target is defined for this
179 awk -v module_cov_target=$mct \
180 -v cfail=${cfail:-WARN} \
181 -v show_all=$show_all \
182 -v full_name="${1}" \
183 -v module="${f%.*}" \
185 -v replace_flags=$replace_flags \
187 function spit_line( ) {
193 /-:/ { # skip unexecutable lines
195 seq++ # allow blank lines in a sequence group
200 nexec++ # number of executable lines
205 if( $2+0 != seq+1 ) {
213 if( prev_if && prev_malloc ) {
215 #printf( "allow discount: %s\n", $0 )
216 if( replace_flags ) {
217 gsub( "#####", " 1", $0 )
218 //gsub( "#####", "=====", $0 )
229 /if[(].*alloc.*{/ { # if( (x = malloc( ... )) != NULL ) or if( (p = sym_alloc(...)) != NULL )
237 /if[(].* == NULL/ { # a nil check likely not easily forced if it wasnt driven
246 if( seq+1 == $2+0 && prev_malloc ) { // malloc on previous line
268 net = unexec - discount
269 orig_cov = ((nexec-unexec)/nexec)*100 # original coverage
270 adj_cov = ((nexec-net)/nexec)*100 # coverage after discount
271 pass_fail = adj_cov < module_cov_target ? cfail : "PASS"
272 rc = adj_cov < module_cov_target ? 1 : 0
273 if( pass_fail == cfail || show_all ) {
275 printf( "[%s] %s executable=%d unexecuted=%d discounted=%d net_unex=%d cov=%d%% ==> %d%% target=%d%%\n",
276 pass_fail, full_name ? full_name : module, nexec, unexec, discount, net, orig_cov, adj_cov, module_cov_target )
278 printf( "[%s] %d%% (%d%%) %s\n", pass_fail, adj_cov, orig_cov, full_name ? full_name : module )
287 # Given a file name ($1) see if it is in the ./.targets file. If it is
288 # return the coverage listed, else return (echo) the default $module_cov_target
291 typeset v=$module_cov_target
293 if [[ -f ./.targets ]]
295 grep "^$1 " ./.targets | head -1 | read stuff
296 tv="${stuff##* }" # assume junk tv; ditch junk
302 # Remove unneeded coverage files, then generate the xml files that can be given
303 # to sonar. gcov.xml is based on the "raw" coverage and dcov.xml is based on
304 # the discounted coverage.
307 rm -fr *_test.c.gcov test_*.c.gcov *_test.c.dcov test_*.c.dcov # we don't report on the unit test code, so ditch
308 cat *.gcov | cov2xml.ksh >gcov.xml
309 cat *.dcov | cov2xml.ksh >dcov.xml
313 # -----------------------------------------------------------------------------------------------------------------
315 # we assume that the project has been built in the ../[.]build directory
318 export LD_LIBRARY_PATH=../build/lib:../build/lib64
319 export C_INCLUDE_PATH=../build/include
321 if [[ -d ../.build ]]
323 export LD_LIBRARY_PATH=../.build/lib:../.build/lib64
324 export C_INCLUDE_PATH=../.build/include
327 echo "[WARN] cannot find build directory (tried ../build and ../.build); things might not work"
332 export LIBRARY_PATH=$LD_LIBRARY_PATH
334 # The Makefile sets specific includes for things
335 #export C_INCLUDE_PATH="../src/rmr/common/include:../src/rmr/si/include:$C_INCLUDE_PATH"
338 builder="make -B %s" # default to plain ole make
340 show_all=1 # show all things -F sets to show failures only
341 strict=0 # -s (strict) will set; when off, coverage state ignored in final pass/fail
342 show_output=0 # show output from each test execution (-S)
345 replace_flags=1 # replace ##### in gcov for discounted lines
347 always_gcov=0 # -a sets to always run gcov even if failure
348 save_gcov=1 # -o turns this off
349 out_dir=${UT_COVERAGE_DIR:-/tmp/rmr_gcov} # -O changes output directory
351 export RMR_WARNING=1 # turn on warnings
355 while [[ $1 == "-"* ]]
358 -C) builder="$2"; shift;; # custom build command
359 -G) builder="gmake %s";;
360 -M) builder="mk -a %s";; # use plan-9 mk (better, but sadly not widly used)
361 -N) run_nano_tests=1;;
362 -O) out_dir=$2; shift;;
365 -c) module_cov_target=$2; shift;;
366 -e) capture_file=$2; >$capture_file; shift;; # capture errors from failed tests rather than spewing on tty
367 -f) force_discounting=1;
368 trigger_discount_str="WARN|FAIL|PASS" # check all outcomes for each module
375 -s) strict=1;; # coverage counts toward pass/fail state
376 -S) show_output=1;; # test output shown even on success
377 -v) (( verbose++ ));;
378 -q) quiet=1;; # less chatty when spilling error log files
381 trigger_discount_str="WARN|FAIL|PASS" # check all outcomes for each module
387 --help) usage; exit 0;;
390 *) echo "unrecognised option: $1" >&2
400 if (( strict )) # if in strict mode, coverage shortcomings are failures
406 if [[ -z $trigger_discount_str ]]
408 trigger_discount_str="$cfail"
415 for tfile in *_test.c
417 if [[ $tfile != *"static_test.c" ]]
419 if(( ! run_nano_tests )) && [[ $tfile == *"nano"* ]]
424 flist="${flist}$tfile "
434 echo "no exec mode; would test these:"
442 rm -fr *.gcov # ditch the previous coverage files
443 ut_errors=0 # unit test errors (not coverage errors)
456 ( # all noise is now captured into a tmp file to support quiet mode
457 echo "$tfile --------------------------------------"
458 bcmd=$( printf "$builder" "${tfile%.c}" )
459 if ! $bcmd >/tmp/PID$$.log 2>&1
461 echo "[FAIL] cannot build $tfile"
467 iflist="main sig_clean_exit " # ignore external functions from our tools
468 add_ignored_func $tfile # ignore all static functions in our test driver
469 add_ignored_func test_support.c # ignore all static functions in our test tools
470 add_ignored_func test_nng_em.c # the nng/nano emulated things
471 add_ignored_func test_si95_em.c # the si emulated things
472 add_ignored_func test_common_em.c # the common emulation functions
473 for f in *_static_test.c # all static modules here
475 if(( ! run_nano_tests )) && [[ $f == *"nano"* ]]
483 if ! ./${tfile%.c} >/tmp/PID$$.log 2>&1
485 echo "[FAIL] unit test failed for: $tfile"
486 if [[ -n $capture_file ]]
488 echo "all errors captured in $capture_file, listing only fail message on tty"
489 echo "$tfile --------------------------------------" >>$capture_file
490 cat /tmp/PID$$.log >>$capture_file
491 grep "^<FAIL>" /tmp/PID$$.log
496 grep "^<" /tmp/PID$$.log|grep -v "^<EM>" # in quiet mode just dump <...> messages which are assumed from the test programme not appl
501 (( ut_errors++ )) # cause failure even if not in strict mode
502 if (( ! always_gcov ))
504 continue # skip coverage tests for this
509 printf "\n============= test programme output =======================\n"
511 printf "===========================================================\n"
517 sed '/^#/ d; /^$/ d; s/^/TARGET: /' ./.targets
518 gcov -f ${tfile%.c} | sed "s/'//g"
521 -v show_all=$show_all \
522 -v ignore_list="$iflist" \
523 -v module_cov_target=$module_cov_target \
528 nignore = split( ignore_list, ignore, " " )
529 for( i = 1; i <= nignore; i++ ) {
533 exit_code = 0 # assume good
543 /File.*_test/ || /File.*test_/ { # dont report on test files
561 fname = "skipped: " fname # should never see and make it smell if we do
576 if( announce_target ) { # announce default once at start
578 printf( "\n[INFO] default target coverage for modules is %d%%\n", module_cov_target )
581 if( target[fname] ) {
585 mct = module_cov_target
588 if( announce_target ) { # annoucne for module if different from default
589 printf( "[INFO] target coverage for %s is %d%%\n", fname, mct )
593 printf( "[%s] %3d%% %s\n", cfail, pct, fname ) # CAUTION: write only 3 things here
596 printf( "[PASS] %3d%% %s\n", pct, fname )
602 printf( "[LOW] %3d%% %s\n", pct, fname )
605 printf( "[MARG] %3d%% %s\n", pct, fname )
608 printf( "[OK] %3d%% %s\n", pct, fname )
620 ' >/tmp/PID$$.log # capture output to run discount on failures
624 if (( rc || force_discounting )) # didn't pass, or forcing, see if discounting helps
628 echo "[INFO] checking to see if discounting improves coverage for failures listed above"
631 # preferred, but breaks under bash
632 #egrep "$trigger_discount_str" /tmp/PID$$.log | while read state junk name
633 egrep "$trigger_discount_str" /tmp/PID$$.log | while read stuff
635 set stuff # this hack required because bash cant read into mult vars
639 if ! discount_an_checks $name.gcov >/tmp/PID$$.disc
644 tail -1 /tmp/PID$$.disc | grep '\['
646 if (( verbose > 1 )) # updated file was generated, keep here
648 echo "[INFO] discounted coverage info in: ${tfile##*/}.dcov"
651 mv /tmp/PID$$.disc ${name##*/}.dcov
654 )>/tmp/PID$$.noise 2>&1
656 for x in *.gcov # merge any previous coverage file with this one
658 if [[ -e $x && -e $x- ]]
660 merge_cov $x $x- >/tmp/PID$$.mc
673 echo "[INFO] final discount checks on merged gcov files"
677 if [[ $xx != *"test"* ]]
680 discount_an_checks $xx >$of
683 tail -1 $of | grep '\['
692 if [[ ! -d $outdir ]]
694 if ! mkdir -p $out_dir
696 echo "[WARN] unable to save .gcov files in $out_dir"
704 echo "[INFO] gcov files saved in $out_dir for push to remote system(s)"
706 rm -f $out_dir/*_test.c.gcov $out_dir/test_*.c.gcov
707 rm -f ./*_test.c.gcov ./test_*.c.gcov
710 echo "[INFO] .gcov files were not saved for remote system"
713 state=0 # final state
715 if (( strict )) # fail if some coverage failed too
717 if (( errors + ut_errors ))
721 else # not strict; fail only if unit tests themselves failed
731 echo "[FAIL] overall unit testing fails: coverage errors=$errors unit test errors=$ut_errors"
733 echo "[PASS] overall unit testing passes"