test/unit_test.ksh

   1 #!/usr/bin/env ksh
   2 # this will fail if run with bash!
   3
   4 #==================================================================================
   5 #        Copyright (c) 2019 Nokia
   6 #        Copyright (c) 2018-2019 AT&T Intellectual Property.
   7 #
   8 #   Licensed under the Apache License, Version 2.0 (the "License");
   9 #   you may not use this file except in compliance with the License.
  10 #   You may obtain a copy of the License at
  11 #
  12 #       http://www.apache.org/licenses/LICENSE-2.0
  13 #
  14 #   Unless required by applicable law or agreed to in writing, software
  15 #   distributed under the License is distributed on an "AS IS" BASIS,
  16 #   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  17 #   See the License for the specific language governing permissions and
  18 #   limitations under the License.
  19 #==================================================================================
  20
  21
  22 #
  23 #       Mnemonic:       unit_test.ksh
  24 #       Abstract:       Execute unit test(s) in the directory and produce a more
  25 #                               meaningful summary than gcov gives by default (exclude
  26 #                               coverage  on the unit test functions).
  27 #
  28 #                               Test files must be named *_test.c, or must explicitly be
  29 #                               supplied on the command line. Functions in the test
  30 #                               files will not be reported on provided that they have
  31 #                               their prototype (all on the SAME line) as:
  32 #                                       static type name() {
  33 #
  34 #                               Functions with coverage less than 80% will be reported as
  35 #                               [LOW] in the output.  A file is considered to pass if the
  36 #                               overall execution percentage for the file is >= 80% regardless
  37 #                               of the number of functions that reported low.
  38 #
  39 #                               Test programmes are built prior to execution. Plan-9 mk is
  40 #                               the preferred builder, but as it's not widly adopted (sigh)
  41 #                               make is assumed and -M will shift to Plan-9. Use -C xxx to
  42 #                               invoke a customised builder.
  43 #
  44 #                               For a module which does not pass, we will attempt to boost
  45 #                               the coverage by discounting the unexecuted lines which are
  46 #                               inside of if() statements that are checking return from
  47 #                               (m)alloc() calls or are checking for nil pointers as these
  48 #                               cases are likely impossible to drive. When discount testing
  49 #                               is done both the failure message from the original analysis
  50 #                               and a pass/fail message from the discount test are listed,
  51 #                               but only the result of the discount test is taken into
  52 #                               consideration with regard to overall success.
  53 #
  54 #                               Overall Pass/Fail
  55 #                               By default the overall state is based only on the success
  56 #                               or failure of the unit tests and NOT on the perceived
  57 #                               state of coverage.  If the -s (strict) option is given, then
  58 #                               overall state will be failure if code coverage expectations
  59 #                               are not met.
  60 #
  61 #       Date:           16 January 2018
  62 #       Author:         E. Scott Daniels
  63 # -------------------------------------------------------------------------
  64
  65 function usage {
  66         echo "usage: $0 [-G|-M|-C custom-command-string] [-c cov-target]  [-f] [-F] [-v] [-x]  [files]"
  67         echo "  if -C is used to provide a custom build command then it must "
  68         echo "  contain a %s which will be replaced with the unit test file name."
  69         echo '  e.g.:  -C "mk -a %s"'
  70         echo "  -c allows user to set the target coverage for a module to pass; default is 80"
  71         echo "  -f forces a discount check (normally done only if coverage < target)"
  72         echo "  -F show only failures at the function level"
  73         echo "  -s strict mode; code coverage must also pass to result in a good exit code"
  74         echo "  -v will write additional information to the tty and save the disccounted file if discount run or -f given"
  75         echo "  -x generates the coverage XML files for Sonar (implies -f)"
  76 }
  77
  78 # read through the given file and add any functions that are static to the
  79 # ignored list.  Only test and test tools files should be parsed.
  80 #
  81 function add_ignored_func {
  82         if [[ ! -r $1 ]]
  83         then
  84                 return
  85         fi
  86
  87         typeset f=""
  88         grep "^static.*(.*).*{" $1 | awk '              # get list of test functions to ignore
  89                 {
  90                         gsub( "[(].*", "" )
  91                         print $3
  92                 }
  93         ' | while read f
  94         do
  95                 iflist="${iflist}$f "
  96         done
  97 }
  98
  99
 100 # Merge two coverage files to preserve the total lines covered by different
 101 # test programmes.
 102 #
 103 function merge_cov {
 104         if [[ -z $1 || -z $2 ]]
 105         then
 106                 return
 107         fi
 108
 109         if [[ ! -e $1 || ! -e $2 ]]
 110         then
 111                 return
 112         fi
 113
 114         (
 115                 cat $1
 116                 echo "==merge=="
 117                 cat $2
 118         ) | awk '
 119                 /^==merge==/ {
 120                         merge = 1
 121                         next
 122                 }
 123
 124                 merge && /#####:/ {
 125                         line = $2+0
 126                         if( executed[line] ) {
 127                                 $1 = sprintf( "%9d:", executed[line] )
 128                         }
 129                 }
 130
 131                 merge {
 132                         print
 133                         next
 134                 }
 135
 136                 {
 137                         line = $2+0
 138                         if( $1+0 > 0 ) {
 139                                 executed[line] = $1+0
 140                         }
 141                 }
 142         '
 143 }
 144
 145 #
 146 #       Parse the .gcov file and discount any unexecuted lines which are in if()
 147 #       blocks that are testing the result of alloc/malloc calls, or testing for
 148 #       nil pointers.  The feeling is that these might not be possible to drive
 149 #       and shoudn't contribute to coverage deficiencies.
 150 #
 151 #       In verbose mode, the .gcov file is written to stdout and any unexecuted
 152 #       line which is discounted is marked with ===== replacing the ##### marking
 153 #       that gcov wrote.
 154 #
 155 #       The return value is 0 for pass; non-zero for fail.
 156 function discount_an_checks {
 157         typeset f="$1"
 158
 159         mct=$( get_mct ${1%.gcov} )                     # see if a special coverage target is defined for this
 160
 161         if [[ ! -f $1 ]]
 162         then
 163                 if [[ -f ${1##*/} ]]
 164                 then
 165                         f=${1##*/}
 166                 else
 167                         echo "cant find: $f"
 168                         return
 169                 fi
 170         fi
 171
 172         awk -v module_cov_target=$mct \
 173                 -v cfail=${cfail:-WARN} \
 174                 -v show_all=$show_all \
 175                 -v full_name="${1}"  \
 176                 -v module="${f%.*}"  \
 177                 -v chatty=$chatty \
 178                 -v replace_flags=$replace_flags \
 179         '
 180         function spit_line( ) {
 181                 if( chatty ) {
 182                         printf( "%s\n", $0 )
 183                 }
 184         }
 185
 186         /-:/ {                          # skip unexecutable lines
 187                 spit_line()
 188                 seq++                                   # allow blank lines in a sequence group
 189                 next
 190         }
 191
 192         {
 193                 nexec++                 # number of executable lines
 194         }
 195
 196         /#####:/ {
 197                 unexec++;
 198                 if( $2+0 != seq+1 ) {
 199                         prev_malloc = 0
 200                         prev_if = 0
 201                         seq = 0
 202                         spit_line()
 203                         next
 204                 }
 205
 206                 if( prev_if && prev_malloc ) {
 207                         if( prev_malloc ) {
 208                                 #printf( "allow discount: %s\n", $0 )
 209                                 if( replace_flags ) {
 210                                         gsub( "#####", "    1", $0 )
 211                                         //gsub( "#####", "=====", $0 )
 212                                 }
 213                                 discount++;
 214                         }
 215                 }
 216
 217                 seq++;;
 218                 spit_line()
 219                 next;
 220         }
 221
 222         /if[(].*alloc.*{/ {                     # if( (x = malloc( ... )) != NULL ) or if( (p = sym_alloc(...)) != NULL )
 223                 seq = $2+0
 224                 prev_malloc = 1
 225                 prev_if = 1
 226                 spit_line()
 227                 next
 228         }
 229
 230         /if[(].* == NULL/ {                             # a nil check likely not easily forced if it wasnt driven
 231                 prev_malloc = 1
 232                 prev_if = 1
 233                 spit_line()
 234                 seq = $2+0
 235                 next
 236         }
 237
 238         /if[(]/ {
 239                 if( seq+1 == $2+0 && prev_malloc ) {            // malloc on previous line
 240                         prev_if = 1
 241                 } else {
 242                         prev_malloc = 0
 243                         prev_if = 0
 244                 }
 245                 spit_line()
 246                 next
 247         }
 248
 249         /alloc[(]/ {
 250                 seq = $2+0
 251                 prev_malloc = 1
 252                 spit_line()
 253                 next
 254         }
 255
 256         {
 257                 spit_line()
 258         }
 259
 260         END {
 261                 net = unexec - discount
 262                 orig_cov = ((nexec-unexec)/nexec)*100           # original coverage
 263                 adj_cov = ((nexec-net)/nexec)*100                       # coverage after discount
 264                 pass_fail = adj_cov < module_cov_target ? cfail : "PASS"
 265                 rc = adj_cov < module_cov_target ? 1 : 0
 266                 if( pass_fail == cfail || show_all ) {
 267                         if( chatty ) {
 268                                 printf( "[%s] %s executable=%d unexecuted=%d discounted=%d net_unex=%d  cov=%d%% ==> %d%%  target=%d%%\n",
 269                                         pass_fail, full_name ? full_name : module, nexec, unexec, discount, net, orig_cov, adj_cov, module_cov_target )
 270                         } else {
 271                                 printf( "[%s] %d%% (%d%%) %s\n", pass_fail, adj_cov, orig_cov, full_name ? full_name : module )
 272                         }
 273                 }
 274
 275                 exit( rc )
 276         }
 277         ' $f
 278 }
 279
 280 # Given a file name ($1) see if it is in the ./.targets file. If it is
 281 # return the coverage listed, else return (echo)  the default $module_cov_target
 282 #
 283 function get_mct {
 284         typeset v=$module_cov_target
 285
 286         if [[ -f ./.targets ]]
 287         then
 288                 grep "^$1 " ./.targets | head -1 | read junk tv
 289         fi
 290
 291         echo ${tv:-$v}
 292 }
 293
 294 # Remove unneeded coverage files, then generate the xml files that can be given
 295 # to sonar.  gcov.xml is based on the "raw" coverage and dcov.xml is based on
 296 # the discounted coverage.
 297 #
 298 function mk_xml {
 299         rm -fr *_test.c.gcov test_*.c.gcov *_test.c.dcov test_*.c.dcov          # we don't report on the unit test code, so ditch
 300         cat *.gcov | cov2xml.ksh >gcov.xml
 301         cat *.dcov | cov2xml.ksh >dcov.xml
 302 }
 303
 304
 305 # -----------------------------------------------------------------------------------------------------------------
 306
 307 # we assume that the project has been built in the ../[.]build directory
 308 if [[ -d ../build ]]
 309 then
 310         export LD_LIBRARY_PATH=../build/lib:../build/lib64
 311 else
 312         if [[ -d ../.build ]]
 313         then
 314                 export LD_LIBRARY_PATH=../.build/lib:../.build/lib64
 315                 export C_INCLUDE_PATH=../.build/include
 316
 317         else
 318                 echo "[WARN] cannot find build directory (tried ../build and ../.build); things might not work"
 319                 echo ""
 320         fi
 321 fi
 322
 323 export LIBRARY_PATH=$LD_LIBRARY_PATH
 324
 325 export C_INCLUDE_PATH="../src/rmr/common/include:$C_INCLUDE_PATH"
 326
 327 module_cov_target=80
 328 builder="make -B %s"            # default to plain ole make
 329 verbose=0
 330 show_all=1                                      # show all things -F sets to show failures only
 331 strict=0                                        # -s (strict) will set; when off, coverage state ignored in final pass/fail
 332 show_output=0                           # show output from each test execution (-S)
 333 quiet=0
 334 gen_xml=0
 335 replace_flags=1                         # replace ##### in gcov for discounted lines
 336 run_nano_tests=0
 337
 338 export RMR_WARNING=1            # turn on warnings
 339
 340 ulimit -c unlimited
 341
 342 while [[ $1 == "-"* ]]
 343 do
 344         case $1 in
 345                 -C)     builder="$2"; shift;;           # custom build command
 346                 -G)     builder="gmake %s";;
 347                 -M)     builder="mk -a %s";;            # use plan-9 mk (better, but sadly not widly used)
 348                 -N)     run_nano_tests=1;;
 349
 350                 -c)     module_cov_target=$2; shift;;
 351                 -e)     capture_file=$2; >$capture_file; shift;;                # capture errors from failed tests rather than spewing on tty
 352                 -f)     force_discounting=1;
 353                         trigger_discount_str="WARN|FAIL|PASS"           # check all outcomes for each module
 354                         ;;
 355
 356                 -F)     show_all=0;;
 357
 358                 -s)     strict=1;;                                      # coverage counts toward pass/fail state
 359                 -S)     show_output=1;;                         # test output shown even on success
 360                 -v)     (( verbose++ ));;
 361                 -q)     quiet=1;;                                       # less chatty when spilling error log files
 362                 -x)     gen_xml=1
 363                         force_discounting=1
 364                         trigger_discount_str="WARN|FAIL|PASS"           # check all outcomes for each module
 365                         rm -fr *cov.xml
 366                         ;;
 367
 368                 -h)     usage; exit 0;;
 369                 --help) usage; exit 0;;
 370                 -\?)    usage; exit 0;;
 371
 372                 *)      echo "unrecognised option: $1" >&2
 373                         usage >&2
 374                         exit 1
 375                         ;;
 376         esac
 377
 378         shift
 379 done
 380
 381
 382 if (( strict ))                 # if in strict mode, coverage shortcomings are failures
 383 then
 384         cfail="FAIL"
 385 else
 386         cfail="WARN"
 387 fi
 388 if [[ -z $trigger_discount_str ]]
 389 then
 390         trigger_discount_str="$cfail"
 391 fi
 392
 393
 394 if [[ -z $1 ]]
 395 then
 396         flist=""
 397         for tfile in *_test.c
 398         do
 399                 if [[ $tfile != *"static_test.c" ]]
 400                 then
 401                         if(( ! run_nano_tests )) && [[ $tfile == *"nano"* ]]
 402                         then
 403                                 continue
 404                         fi
 405
 406                         flist="${flist}$tfile "
 407                 fi
 408         done
 409 else
 410         flist="$@"
 411 fi
 412
 413
 414 rm -fr *.gcov                   # ditch the previous coverage files
 415 ut_errors=0                     # unit test errors (not coverage errors)
 416 errors=0
 417
 418 for tfile in $flist
 419 do
 420         for x in *.gcov
 421         do
 422                 if [[ -e $x ]]
 423                 then
 424                         cp $x $x-
 425                 fi
 426         done
 427
 428         echo "$tfile --------------------------------------"
 429         bcmd=$( printf "$builder" "${tfile%.c}" )
 430         if ! $bcmd >/tmp/PID$$.log 2>&1
 431         then
 432                 echo "[FAIL] cannot build $tfile"
 433                 cat /tmp/PID$$.log
 434                 rm -f /tmp/PID$$
 435                 exit 1
 436         fi
 437
 438         iflist="main sig_clean_exit "           # ignore external functions from our tools
 439         add_ignored_func $tfile                         # ignore all static functions in our test driver
 440         add_ignored_func test_support.c         # ignore all static functions in our test tools
 441         add_ignored_func test_nng_em.c          # the nng/nano emulated things
 442         for f in *_static_test.c                        # all static modules here
 443         do
 444                 if(( ! run_nano_tests )) && [[ $f == *"nano"* ]]
 445                 then
 446                         continue
 447                 fi
 448
 449                 add_ignored_func $f
 450         done
 451
 452         if ! ./${tfile%.c} >/tmp/PID$$.log 2>&1
 453         then
 454                 echo "[FAIL] unit test failed for: $tfile"
 455                 if [[ -n $capture_file ]]
 456                 then
 457                         echo "all errors captured in $capture_file, listing only fail message on tty"
 458                         echo "$tfile --------------------------------------" >>$capture_file
 459                         cat /tmp/PID$$.log >>$capture_file
 460                         grep "^<FAIL>" /tmp/PID$$.log
 461                         echo ""
 462                 else
 463                         if (( quiet ))
 464                         then
 465                                 grep "^<" /tmp/PID$$.log|grep -v "^<EM>"        # in quiet mode just dump <...> messages which are assumed from the test programme not appl
 466                         else
 467                                 cat /tmp/PID$$.log
 468                         fi
 469                 fi
 470                 (( ut_errors++ ))                               # cause failure even if not in strict mode
 471                 continue                                                # skip coverage tests for this
 472         else
 473                 if (( show_output ))
 474                 then
 475                         printf "\n============= test programme output =======================\n"
 476                         cat /tmp/PID$$.log
 477                         printf "===========================================================\n"
 478                 fi
 479         fi
 480
 481         (
 482                 touch ./.targets
 483                 sed '/^#/ d; /^$/ d; s/^/TARGET: /' ./.targets
 484                 gcov -f ${tfile%.c} | sed "s/'//g"
 485         ) | awk \
 486                 -v cfail=$cfail \
 487                 -v show_all=$show_all \
 488                 -v ignore_list="$iflist" \
 489                 -v module_cov_target=$module_cov_target \
 490                 -v chatty=$verbose \
 491                 '
 492                 BEGIN {
 493                         announce_target = 1;
 494                         nignore = split( ignore_list, ignore, " " )
 495                         for( i = 1; i <= nignore; i++ ) {
 496                                 imap[ignore[i]] = 1
 497                         }
 498
 499                         exit_code = 0           # assume good
 500                 }
 501
 502                 /^TARGET:/ {
 503                         if( NF > 1 ) {
 504                                 target[$2] = $NF
 505                         }
 506                         next;
 507                 }
 508
 509                 /File.*_test/ || /File.*test_/ {                # dont report on test files
 510                         skip = 1
 511                         file = 1
 512                         fname = $2
 513                         next
 514                 }
 515
 516                 /File/ {
 517                         skip = 0
 518                         file = 1
 519                         fname = $2
 520                         next
 521                 }
 522
 523                 /Function/ {
 524                         fname = $2
 525                         file = 0
 526                         if( imap[fname] ) {
 527                                 fname = "skipped: " fname               # should never see and make it smell if we do
 528                                 skip = 1
 529                         } else {
 530                                 skip = 0
 531                         }
 532                         next
 533                 }
 534
 535                 skip { next }
 536
 537                 /Lines executed/ {
 538                         split( $0, a, ":" )
 539                         pct = a[2]+0
 540
 541                         if( file ) {
 542                                 if( announce_target ) {                         # announce default once at start
 543                                         announce_target = 0;
 544                                         printf( "\n[INFO] default target coverage for modules is %d%%\n", module_cov_target )
 545                                 }
 546
 547                                 if( target[fname] ) {
 548                                         mct = target[fname]
 549                                         announce_target = 1;
 550                                 } else {
 551                                         mct = module_cov_target
 552                                 }
 553
 554                                 if( announce_target ) {                                 # annoucne for module if different from default
 555                                         printf( "[INFO] target coverage for %s is %d%%\n", fname, mct )
 556                                 }
 557
 558                                 if( pct < mct ) {
 559                                         printf( "[%s] %3d%% %s\n", cfail, pct, fname )  # CAUTION: write only 3 things  here
 560                                         exit_code = 1
 561                                 } else {
 562                                         printf( "[PASS] %3d%% %s\n", pct, fname )
 563                                 }
 564
 565                                 announce_target = 0;
 566                         } else {
 567                                 if( pct < 70 ) {
 568                                         printf( "[LOW]  %3d%% %s\n", pct, fname )
 569                                 } else {
 570                                         if( pct < 80 ) {
 571                                                 printf( "[MARG] %3d%% %s\n", pct, fname )
 572                                         } else {
 573                                                 if( show_all ) {
 574                                                         printf( "[OK]   %3d%% %s\n", pct, fname )
 575                                                 }
 576                                         }
 577                                 }
 578                         }
 579
 580                 }
 581
 582                 END {
 583                         printf( "\n" );
 584                         exit( exit_code )
 585                 }
 586         ' >/tmp/PID$$.log                                       # capture output to run discount on failures
 587         rc=$?
 588         cat /tmp/PID$$.log
 589
 590         if (( rc  || force_discounting ))       # didn't pass, or forcing, see if discounting helps
 591         then
 592                 if (( ! verbose ))
 593                 then
 594                         echo "[INFO] checking to see if discounting improves coverage for failures listed above"
 595                 fi
 596
 597                 egrep "$trigger_discount_str"  /tmp/PID$$.log | while read state junk  name
 598                 do
 599                         if ! discount_an_checks $name.gcov >/tmp/PID$$.disc
 600                         then
 601                                 (( errors++ ))
 602                         fi
 603
 604                         tail -1 /tmp/PID$$.disc | grep '\['
 605
 606                         if (( verbose > 1 ))                    # updated file was generated, keep here
 607                         then
 608                                 echo "[INFO] discounted coverage info in: ${tfile##*/}.dcov"
 609                         fi
 610
 611                         mv /tmp/PID$$.disc ${name##*/}.dcov
 612                 done
 613         fi
 614
 615         for x in *.gcov                                                 # merge any previous coverage file with this one
 616         do
 617                 if [[ -e $x && -e $x- ]]
 618                 then
 619                         merge_cov $x $x- >/tmp/PID$$.mc
 620                         cp /tmp/PID$$.mc $x
 621                         rm $x-
 622                 fi
 623         done
 624 done
 625
 626 echo ""
 627 echo "[INFO] final discount checks on merged gcov files"
 628 show_all=1
 629 for xx in *.gcov
 630 do
 631         if [[ $xx != *"test"* ]]
 632         then
 633                 of=${xx%.gcov}.dcov
 634                 discount_an_checks $xx  >$of
 635                 tail -1 $of |  grep '\['
 636         fi
 637 done
 638
 639 state=0                                         # final state
 640 rm -f /tmp/PID$$.*
 641 if (( strict ))                         # fail if some coverage failed too
 642 then
 643         if (( errors + ut_errors ))
 644         then
 645                 state=1
 646         fi
 647 else                                            # not strict; fail only if unit tests themselves failed
 648         if (( ut_errors ))
 649         then
 650                 state=1
 651         fi
 652 fi
 653
 654 echo""
 655 if (( state ))
 656 then
 657         echo "[FAIL] overall unit testing fails: coverage errors=$errors   unit test errors=$ut_errors"
 658 else
 659         echo "[PASS] overall unit testing passes"
 660         if (( gen_xml ))
 661         then
 662                 mk_xml
 663         fi
 664 fi
 665 exit $state
 666