3 # ============LICENSE_START===============================================
4 # Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 # ========================================================================
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
17 # ============LICENSE_END=================================================
20 # This is a script that contains all the functions needed for auto test
21 # Arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]
24 # Create a test case id, ATC (Auto Test Case), from the name of the test case script.
25 # FTC1.sh -> ATC == FTC1
26 ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
28 #Create result file (containing '1' for error) for this test case
29 #Will be replaced with a file containing '0' if all test cases pass
30 echo "1" > "$PWD/.result$ATC.txt"
32 #Formatting for 'echo' cmd
37 GREEN="\033[32m\033[1m"
39 YELLOW="\033[33m\033[1m"
44 if [ $? -ne 0 ] || [ -z tmp ]; then
45 echo -e $RED"python3 is required to run the test environment, pls install"$ERED
49 if [ $? -ne 0 ] || [ -z tmp ]; then
50 echo -e $RED"docker is required to run the test environment, pls install"$ERED
54 tmp=$(which docker-compose)
55 if [ $? -ne 0 ] || [ -z tmp ]; then
56 echo -e $RED"docker-compose is required to run the test environment, pls install"$ERED
60 # Just resetting any previous echo formatting...
63 # default test environment variables
64 TEST_ENV_VAR_FILE="../common/test_env.sh"
66 echo "Test case started as: ${BASH_SOURCE[$i+1]} "$@
69 LOCALHOST="http://localhost:"
71 # Make curl retries towards ECS for http response codes set in this env var, space separated list of codes
74 # Make curl retries towards the agent for http response codes set in this env var, space separated list of codes
77 # Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
80 # Var to hold 'auto' in case containers shall be stopped when test case ends
83 # Var to hold the app names to use local image for when running 'remote' or 'remote-remove'
86 # List of available apps to override with local image
87 AVAILABLE_LOCAL_IMAGES_OVERRIDE="PA ECS CP SDNC RICSIM"
89 # Use this var (STOP_AT_ERROR=1 in the test script) for debugging/trouble shooting to take all logs and exit at first FAIL test case
92 # Function to indent cmd output with one space
93 indent1() { sed 's/^/ /'; }
95 # Function to indent cmd output with two spaces
96 indent2() { sed 's/^/ /'; }
98 # Set a description string for the test case
99 if [ -z "$TC_ONELINE_DESCR" ]; then
100 TC_ONELINE_DESCR="<no-description>"
101 echo "No test case description found, TC_ONELINE_DESCR should be set on in the test script , using "$TC_ONELINE_DESCR
104 # Counter for test suites
105 if [ -f .tmp_tcsuite_ctr ]; then
106 tmpval=$(< .tmp_tcsuite_ctr)
108 echo $tmpval > .tmp_tcsuite_ctr
111 # Create the logs dir if not already created in the current dir
112 if [ ! -d "logs" ]; then
117 # Create a http message log for this testcase
118 HTTPLOG=$PWD"/.httplog_"$ATC".txt"
122 # Create a log dir for the test case
123 mkdir -p $TESTLOGS/$ATC
125 # Clear the log dir for the test case
126 rm $TESTLOGS/$ATC/*.log &> /dev/null
127 rm $TESTLOGS/$ATC/*.txt &> /dev/null
128 rm $TESTLOGS/$ATC/*.json &> /dev/null
130 # Log all output from the test case to a TC log
131 TCLOG=$TESTLOGS/$ATC/TC.log
132 exec &> >(tee ${TCLOG})
134 #Variables for counting tests as well as passed and failed tests
141 #File to keep deviation messages
142 DEVIATION_FILE=".tmp_deviations"
143 rm $DEVIATION_FILE &> /dev/null
145 #Var for measuring execution time
146 TCTEST_START=$SECONDS
148 #File to save timer measurement results
149 TIMER_MEASUREMENTS=".timer_measurement.txt"
150 echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
153 echo "-------------------------------------------------------------------------------------------------"
154 echo "----------------------------------- Test case: "$ATC
155 echo "----------------------------------- Started: "$(date)
156 echo "-------------------------------------------------------------------------------------------------"
157 echo "-- Description: "$TC_ONELINE_DESCR
158 echo "-------------------------------------------------------------------------------------------------"
159 echo "----------------------------------- Test case setup -----------------------------------"
163 if [ $# -lt 1 ]; then
166 if [ $paramerror -eq 0 ]; then
167 if [ "$1" != "remote" ] && [ "$1" != "remote-remove" ] && [ "$1" != "local" ]; then
174 while [ $paramerror -eq 0 ] && [ $foundparm -eq 0 ]; do
176 if [ $paramerror -eq 0 ]; then
177 if [ "$1" == "auto-clean" ]; then
179 echo "Option set - Auto clean at end of test script"
184 if [ $paramerror -eq 0 ]; then
185 if [ "$1" == "--stop-at-error" ]; then
187 echo "Option set - Stop at first error"
192 if [ $paramerror -eq 0 ]; then
193 if [ "$1" == "--ricsim-prefix" ]; then
199 echo "Option set - Overriding RIC_SIM_PREFIX with: "$1
205 if [ $paramerror -eq 0 ]; then
206 if [ "$1" == "--env-file" ]; then
212 echo "Option set - Overriding test_env.sh with: "$1
218 if [ $paramerror -eq 0 ]; then
219 if [ "$1" == "--use-local-image" ]; then
222 while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
223 USE_LOCAL_IMAGES=$USE_LOCAL_IMAGES" "$1
224 if [[ "$AVAILABLE_LOCAL_IMAGES_OVERRIDE" != *"$1"* ]]; then
230 if [ -z "$USE_LOCAL_IMAGES" ]; then
233 echo "Option set - Override remote images for app(s):"$USE_LOCAL_IMAGES
241 if [ $paramerror -eq 0 ] && [ $# -gt 0 ]; then
245 if [ $paramerror -eq 1 ]; then
246 echo -e $RED"Expected arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]"$ERED
250 # sourcing the selected env variables for the test case
251 if [ -f "$TEST_ENV_VAR_FILE" ]; then
252 echo -e $BOLD"Sourcing env vars from: "$TEST_ENV_VAR_FILE$EBOLD
255 echo -e $RED"Selected env var file does not exist: "$TEST_ENV_VAR_FILE$ERED
259 #Vars for A1 interface version and container count
267 # Vars to switch between http and https. Extra curl flag needed for https
268 export RIC_SIM_HTTPX="http"
269 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
270 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
271 export RIC_SIM_CERT_MOUNT_DIR="./cert"
273 export MR_HTTPX="http"
274 export MR_PORT=$MR_INTERNAL_PORT
275 export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
277 export CR_HTTPX="http"
278 export CR_PORT=$CR_INTERNAL_PORT
279 export CR_LOCAL_PORT=$CR_EXTERNAL_PORT #When CR is running outside the docker net
281 export SDNC_HTTPX="http"
282 export SDNC_PORT=$SDNC_INTERNAL_PORT
283 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
285 echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
287 #Temp var to check for image variable name errors
289 #Create a file with image info for later printing as a table
290 image_list_file=".image-list"
291 echo -e " Container\tImage\ttag" > $image_list_file
293 # Check if image env var is set and if so export the env var with image to use (used by docker compose files)
294 # arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>
295 __check_image_var() {
296 if [ $# -ne 6 ]; then
297 echo "Expected arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>"
301 __check_excluded_image $6
302 if [ $? -ne 0 ]; then
303 echo -e "$1\t<image-excluded>\t<no-tag>" >> $image_list_file
304 # Image is excluded since the corresponding app is not used in this test
308 #Create var from the input var names
312 if [ -z $image ]; then
313 echo -e $RED"\$"$4" not set in test_env"$ERED
316 tmp=$tmp"<no-image>\t"
321 echo -e $RED"\$"$5" not set in test_env"$ERED
328 echo -e "$tmp" >> $image_list_file
330 export "${3}"=$image":"$tag
332 #echo " Configured image for ${1} (script start arg=${2}): "$image":"$tag
336 #Check if app local image shall override remote image
337 # Possible IDs for local image override: PA, CP, SDNC, RICSIM, ECS
338 __check_image_local_override() {
339 for im in $USE_LOCAL_IMAGES; do
340 if [ "$1" == "$im" ]; then
347 #Check if app uses image excluded from this test run
348 # Possible IDs for image exclusion: PA, CP, SDNC, RICSIM, MR, CR, CBS, CONSUL, ECS
349 __check_excluded_image() {
350 for im in $EXCLUDED_IMAGES; do
351 if [ "$1" == "$im" ]; then
358 # Check that image env setting are available
361 if [ $START_ARG == "local" ]; then
364 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
366 #Local Control Panel image
367 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
370 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
373 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
375 elif [ $START_ARG == "remote" ] || [ $START_ARG == "remote-remove" ]; then
377 __check_image_local_override 'PA'
378 if [ $? -eq 0 ]; then
380 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG" PA
383 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
386 __check_image_local_override 'CP'
387 if [ $? -eq 0 ]; then
388 #Remote Control Panel image
389 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG" CP
391 #Local Control Panel image
392 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
395 __check_image_local_override 'SDNC'
396 if [ $? -eq 0 ]; then
398 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG" SDNC
401 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
404 __check_image_local_override 'RICSIM'
405 if [ $? -eq 0 ]; then
406 #Remote ric sim image
407 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG" RICSIM
410 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
413 __check_image_local_override 'ECS'
414 if [ $? -eq 0 ]; then
416 __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_REMOTE_IMAGE" "ECS_REMOTE_IMAGE_TAG" ECS
419 __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_LOCAL_IMAGE" "ECS_LOCAL_IMAGE_TAG" ECS
423 #Should never get here....
424 echo "Unknow args: "$@
429 # These images are not built as part of this project official images, just check that env vars are set correctly
430 __check_image_var " Message Router" $START_ARG "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG" MR
431 __check_image_var " Callback Receiver" $START_ARG "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG" CR
432 __check_image_var " Consul" $START_ARG "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG" CONSUL
433 __check_image_var " CBS" $START_ARG "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG" CBS
434 __check_image_var " SDNC DB" $START_ARG "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG" SDNC #Uses sdnc app name
436 #Errors in image setting - exit
437 if [ $IMAGE_ERR -ne 0 ]; then
441 #Print a tables of the image settings
442 echo -e $BOLD"Images configured for start arg: "$START $EBOLD
443 column -t -s $'\t' $image_list_file
448 #Set the SIM_GROUP var
449 echo -e $BOLD"Setting var to main dir of all container/simulator scripts"$EBOLD
450 if [ -z "$SIM_GROUP" ]; then
451 SIM_GROUP=$PWD/../simulator-group
452 if [ ! -d $SIM_GROUP ]; then
453 echo "Trying to set env var SIM_GROUP to dir 'simulator-group' in the nontrtric repo, but failed."
454 echo -e $RED"Please set the SIM_GROUP manually in the test_env.sh"$ERED
457 echo " SIM_GROUP auto set to: " $SIM_GROUP
459 elif [ $SIM_GROUP = *simulator_group ]; then
460 echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check common/test_env.sh"$ERED
463 echo " SIM_GROUP env var already set to: " $SIM_GROUP
468 #Temp var to check for image pull errors
471 #Function to check if image exist and stop+remove the container+pull new images as needed
472 #args <script-start-arg> <descriptive-image-name> <container-base-name> <image-with-tag>
473 __check_and_pull_image() {
475 echo -e " Checking $BOLD$2$EBOLD container(s) with basename: $BOLD$3$EBOLD using image: $BOLD$4$EBOLD"
476 format_string="\"{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\""
477 tmp_im=$(docker images --format $format_string ${4})
479 if [ $1 == "local" ]; then
480 if [ -z "$tmp_im" ]; then
481 echo -e " "$2" (local image): \033[1m"$4"\033[0m $RED does not exist in local registry, need to be built (or manually pulled)"$ERED
485 echo -e " "$2" (local image): \033[1m"$4"\033[0m "$GREEN"OK"$EGREEN
487 elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
488 if [ $1 == "remote-remove" ]; then
489 echo -ne " Attempt to stop and remove container(s), if running - ${SAMELINE}"
490 tmp="$(docker ps -aq --filter name=${3})"
491 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
492 docker stop $tmp &> .dockererr
493 if [ $? -ne 0 ]; then
496 echo -e $RED" Container(s) could not be stopped - try manual stopping the container(s)"$ERED
501 echo -ne " Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
502 tmp="$(docker ps -aq --filter name=${3})" &> /dev/null
503 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
504 docker rm $tmp &> .dockererr
505 if [ $? -ne 0 ]; then
508 echo -e $RED" Container(s) could not be removed - try manual removal of the container(s)"$ERED
513 echo -e " Attempt to stop and remove container(s), if running - "$GREEN"stopped removed"$EGREEN
514 echo -ne " Removing image - ${SAMELINE}"
515 tmp="$(docker images -q ${4})" &> /dev/null
516 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
517 docker rmi --force $4 &> .dockererr
518 if [ $? -ne 0 ]; then
521 echo -e $RED" Image could not be removed - try manual removal of the image"$ERED
525 echo -e " Removing image - "$GREEN"removed"$EGREEN
527 echo -e " Removing image - "$GREEN"image not in repository"$EGREEN
531 if [ -z "$tmp_im" ]; then
532 echo -ne " Pulling image${SAMELINE}"
533 docker pull $4 &> .dockererr
534 tmp_im=$(docker images ${4} | grep -v REPOSITORY)
535 if [ -z "$tmp_im" ]; then
537 echo -e " Pulling image -$RED could not be pulled"$ERED
542 echo -e " Pulling image -$GREEN Pulled $EGREEN"
544 echo -e " Pulling image -$GREEN OK $EGREEN(exists in local repository)"
551 echo -e $BOLD"Pulling configured images, if needed"$EBOLD
553 __check_excluded_image 'PA'
554 if [ $? -eq 0 ]; then
555 START_ARG_MOD=$START_ARG
556 __check_image_local_override 'PA'
557 if [ $? -eq 1 ]; then
558 START_ARG_MOD="local"
560 app="Policy Agent"; __check_and_pull_image $START_ARG_MOD "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
562 echo -e $YELLOW" Excluding PA image from image check/pull"$EYELLOW
565 __check_excluded_image 'ECS'
566 if [ $? -eq 0 ]; then
567 START_ARG_MOD=$START_ARG
568 __check_image_local_override 'ECS'
569 if [ $? -eq 1 ]; then
570 START_ARG_MOD="local"
572 app="ECS"; __check_and_pull_image $START_ARG_MOD "$app" $ECS_APP_NAME $ECS_IMAGE
574 echo -e $YELLOW" Excluding ECS image from image check/pull"$EYELLOW
577 __check_excluded_image 'CP'
578 if [ $? -eq 0 ]; then
579 START_ARG_MOD=$START_ARG
580 __check_image_local_override 'CP'
581 if [ $? -eq 1 ]; then
582 START_ARG_MOD="local"
584 app="Non-RT RIC Control Panel"; __check_and_pull_image $START_ARG_MOD "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
586 echo -e $YELLOW" Excluding Non-RT RIC Control Panel image from image check/pull"$EYELLOW
589 __check_excluded_image 'RICSIM'
590 if [ $? -eq 0 ]; then
591 START_ARG_MOD=$START_ARG
592 __check_image_local_override 'RICSIM'
593 if [ $? -eq 1 ]; then
594 START_ARG_MOD="local"
596 app="Near-RT RIC Simulator"; __check_and_pull_image $START_ARG_MOD "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
598 echo -e $YELLOW" Excluding Near-RT RIC Simulator image from image check/pull"$EYELLOW
602 __check_excluded_image 'CONSUL'
603 if [ $? -eq 0 ]; then
604 app="Consul"; __check_and_pull_image $START_ARG "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
606 echo -e $YELLOW" Excluding Consul image from image check/pull"$EYELLOW
609 __check_excluded_image 'CBS'
610 if [ $? -eq 0 ]; then
611 app="CBS"; __check_and_pull_image $START_ARG "$app" $CBS_APP_NAME $CBS_IMAGE
613 echo -e $YELLOW" Excluding CBS image from image check/pull"$EYELLOW
616 __check_excluded_image 'SDNC'
617 if [ $? -eq 0 ]; then
618 START_ARG_MOD=$START_ARG
619 __check_image_local_override 'SDNC'
620 if [ $? -eq 1 ]; then
621 START_ARG_MOD="local"
623 app="SDNC A1 Controller"; __check_and_pull_image $START_ARG_MOD "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
624 app="SDNC DB"; __check_and_pull_image $START_ARG "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
626 echo -e $YELLOW" Excluding SDNC image and related DB image from image check/pull"$EYELLOW
629 #Errors in image setting - exit
630 if [ $IMAGE_ERR -ne 0 ]; then
632 echo "#################################################################################################"
633 echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
634 echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
635 echo "#################################################################################################"
642 echo -e $BOLD"Building images needed for test"$EBOLD
645 __check_excluded_image 'MR'
646 if [ $? -eq 0 ]; then
649 echo " Building mrstub image: mrstub:latest"
650 docker build -t mrstub . &> .dockererr
651 if [ $? -eq 0 ]; then
652 echo -e $GREEN" Build Ok"$EGREEN
654 echo -e $RED" Build Failed"$ERED
660 echo -e $YELLOW" Excluding mrstub from image build"$EYELLOW
663 __check_excluded_image 'CR'
664 if [ $? -eq 0 ]; then
666 echo " Building Callback Receiver image: callback-receiver:latest"
667 docker build -t callback-receiver . &> .dockererr
668 if [ $? -eq 0 ]; then
669 echo -e $GREEN" Build Ok"$EGREEN
671 echo -e $RED" Build Failed"$ERED
677 echo -e $YELLOW" Excluding Callback Receiver from image build"$EYELLOW
682 # Create a table of the images used in the script
683 echo -e $BOLD"Local docker registry images used in the this test script"$EBOLD
685 docker_tmp_file=.docker-images-table
686 format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\\t{{.CreatedAt}}"
687 echo -e " Application\tRepository\tTag\tCreated since\tSize\tCreated at" > $docker_tmp_file
688 __check_excluded_image 'PA'
689 if [ $? -eq 0 ]; then
690 echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >> $docker_tmp_file
692 __check_excluded_image 'ECS'
693 if [ $? -eq 0 ]; then
694 echo -e " ECS\t$(docker images --format $format_string $ECS_IMAGE)" >> $docker_tmp_file
696 __check_excluded_image 'CP'
697 if [ $? -eq 0 ]; then
698 echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >> $docker_tmp_file
700 __check_excluded_image 'RICSIM'
701 if [ $? -eq 0 ]; then
702 echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >> $docker_tmp_file
704 __check_excluded_image 'MR'
705 if [ $? -eq 0 ]; then
706 echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >> $docker_tmp_file
708 __check_excluded_image 'CR'
709 if [ $? -eq 0 ]; then
710 echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >> $docker_tmp_file
712 __check_excluded_image 'CONSUL'
713 if [ $? -eq 0 ]; then
714 echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
716 __check_excluded_image 'CBS'
717 if [ $? -eq 0 ]; then
718 echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
720 __check_excluded_image 'SDNC'
721 if [ $? -eq 0 ]; then
722 echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
723 echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
726 column -t -s $'\t' $docker_tmp_file
730 echo -e $BOLD"======================================================="$EBOLD
731 echo -e $BOLD"== Common test setup completed - test script begins =="$EBOLD
732 echo -e $BOLD"======================================================="$EBOLD
735 # Function to print the test result, shall be the last cmd in a test script
737 # (Function for test scripts)
741 duration=$((TCTEST_END-TCTEST_START))
743 echo "-------------------------------------------------------------------------------------------------"
744 echo "------------------------------------- Test case: "$ATC
745 echo "------------------------------------- Ended: "$(date)
746 echo "-------------------------------------------------------------------------------------------------"
747 echo "-- Description: "$TC_ONELINE_DESCR
748 echo "-- Execution time: " $duration " seconds"
749 echo "-------------------------------------------------------------------------------------------------"
750 echo "------------------------------------- RESULTS"
754 if [ $RES_DEVIATION -gt 0 ]; then
755 echo "Test case deviations"
756 echo "===================================="
760 echo "Timer measurement in the test script"
761 echo "===================================="
762 column -t -s $'\t' $TIMER_MEASUREMENTS
765 total=$((RES_PASS+RES_FAIL))
766 if [ $RES_TEST -eq 0 ]; then
767 echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
768 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
769 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
770 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
771 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
772 elif [ $total != $RES_TEST ]; then
773 echo -e "\033[1mTotal number of tests does not match the sum of passed and failed tests. Check the script....\033[0m"
774 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
775 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
776 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
777 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
778 elif [ $RES_CONF_FAIL -ne 0 ]; then
779 echo -e "\033[1mOne or more configure regest has failed. Check the script log....\033[0m"
780 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
781 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
782 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
783 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
784 elif [ $RES_PASS = $RES_TEST ]; then
785 echo -e "All tests \033[32m\033[1mPASS\033[0m"
786 echo -e "\033[32m\033[1m ___ _ ___ ___ \033[0m"
787 echo -e "\033[32m\033[1m | _ \/_\ / __/ __| \033[0m"
788 echo -e "\033[32m\033[1m | _/ _ \\__ \__ \\ \033[0m"
789 echo -e "\033[32m\033[1m |_|/_/ \_\___/___/ \033[0m"
792 # Update test suite counter
793 if [ -f .tmp_tcsuite_pass_ctr ]; then
794 tmpval=$(< .tmp_tcsuite_pass_ctr)
796 echo $tmpval > .tmp_tcsuite_pass_ctr
798 if [ -f .tmp_tcsuite_pass ]; then
799 echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
801 #Create file with OK exit code
802 echo "0" > "$PWD/.result$ATC.txt"
804 echo -e "One or more tests with status \033[31m\033[1mFAIL\033[0m "
805 echo -e "\033[31m\033[1m ___ _ ___ _ \033[0m"
806 echo -e "\033[31m\033[1m | __/_\ |_ _| | \033[0m"
807 echo -e "\033[31m\033[1m | _/ _ \ | || |__ \033[0m"
808 echo -e "\033[31m\033[1m |_/_/ \_\___|____|\033[0m"
810 # Update test suite counter
811 if [ -f .tmp_tcsuite_fail_ctr ]; then
812 tmpval=$(< .tmp_tcsuite_fail_ctr)
814 echo $tmpval > .tmp_tcsuite_fail_ctr
816 if [ -f .tmp_tcsuite_fail ]; then
817 echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_fail
821 echo "++++ Number of tests: "$RES_TEST
822 echo "++++ Number of passed tests: "$RES_PASS
823 echo "++++ Number of failed tests: "$RES_FAIL
825 echo "++++ Number of failed configs: "$RES_CONF_FAIL
827 echo "++++ Number of test case deviations: "$RES_DEVIATION
829 echo "------------------------------------- Test case complete ---------------------------------"
830 echo "-------------------------------------------------------------------------------------------------"
834 #####################################################################
835 ###### Functions for start, configuring, stoping, cleaning etc ######
836 #####################################################################
838 # Start timer for time measurement
839 # args - (any args will be printed though)
841 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
843 echo " Timer started"
846 # Print the value of the time (in seconds)
847 # args - <timer message to print> - timer value and message will be printed both on screen
848 # and in the timer measurement report
850 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
851 if [ $# -lt 1 ]; then
853 __print_err "need 1 or more args, <timer message to print>" $@
856 duration=$(($SECONDS-$TC_TIMER))
857 if [ $duration -eq 0 ]; then
860 duration=$duration" seconds"
862 echo " Timer duration :" $duration
864 echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
867 # Print the value of the time (in seconds) and reset the timer
868 # args - <timer message to print> - timer value and message will be printed both on screen
869 # and in the timer measurement report
870 print_and_reset_timer() {
871 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
872 if [ $# -lt 1 ]; then
874 __print_err "need 1 or more args, <timer message to print>" $@
877 duration=$(($SECONDS-$TC_TIMER))" seconds"
878 if [ $duration -eq 0 ]; then
881 duration=$duration" seconds"
883 echo " Timer duration :" $duration
887 echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
890 # Print info about a deviations from intended tests
891 # Each deviation counted is also printed in the testreport
892 # args <deviation message to print>
894 echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
895 if [ $# -lt 1 ]; then
897 __print_err "need 1 or more args, <deviation message to print>" $@
901 echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
902 echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
906 # Stop at first FAIL test case and take all logs - only for debugging/trouble shooting
907 __check_stop_at_error() {
908 if [ $STOP_AT_ERROR -eq 1 ]; then
909 echo -e $RED"Test script configured to stop at first FAIL, taking all logs and stops"$ERED
910 store_logs "STOP_AT_ERROR"
916 # Check if app name var is set. If so return the app name otherwise return "NOTSET"
918 if [ $# -eq 1 ]; then
925 # Stop and remove all containers
927 # (Function for test scripts)
930 echo -e $BOLD"Stopping and removing all running containers, by container name"$EBOLD
932 CONTAINTER_NAMES=("Policy Agent " $(__check_app_name $POLICY_AGENT_APP_NAME)\
933 "ECS " $(__check_app_name $ECS_APP_NAME)\
934 "Non-RT RIC Simulator(s)" $(__check_app_name $RIC_SIM_PREFIX)\
935 "Message Router " $(__check_app_name $MR_APP_NAME)\
936 "Callback Receiver " $(__check_app_name $CR_APP_NAME)\
937 "Control Panel " $(__check_app_name $CONTROL_PANEL_APP_NAME)\
938 "SDNC A1 Controller " $(__check_app_name $SDNC_APP_NAME)\
939 "SDNC DB " $(__check_app_name $SDNC_DB_APP_NAME)\
940 "CBS " $(__check_app_name $CBS_APP_NAME)\
941 "Consul " $(__check_app_name $CONSUL_APP_NAME))
943 nw=0 # Calc max width of container name, to make a nice table
944 for (( i=1; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
946 if [ ${#CONTAINTER_NAMES[i]} -gt $nw ]; then
947 nw=${#CONTAINTER_NAMES[i]}
951 for (( i=0; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
952 APP="${CONTAINTER_NAMES[i]}"
953 CONTR="${CONTAINTER_NAMES[i+1]}"
954 if [ $CONTR != "NOTSET" ]; then
955 for((w=${#CONTR}; w<$nw; w=w+1)); do
958 echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
959 docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
960 echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
961 docker rm --force $(docker ps -qa --filter name=${CONTR}) &> /dev/null
962 echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
968 echo -e $BOLD" Removing docker network"$EBOLD
969 TMP=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
970 if [ "$TMP" == $DOCKER_SIM_NWNAME ]; then
971 docker network rm $DOCKER_SIM_NWNAME | indent2
972 if [ $? -ne 0 ]; then
973 echo -e $RED" Cannot remove docker network. Manually remove or disconnect containers from $DOCKER_SIM_NWNAME"$ERED
977 echo -e "$GREEN Done$EGREEN"
980 echo -e $BOLD" Removing all unused docker neworks"$EBOLD
981 docker network prune --force | indent2
982 echo -e "$GREEN Done$EGREEN"
985 echo -e $BOLD" Removing all unused docker volumes"$EBOLD
986 docker volume prune --force | indent2
987 echo -e "$GREEN Done$EGREEN"
990 echo -e $BOLD" Removing all dangling/untagged docker images"$EBOLD
991 docker rmi --force $(docker images -q -f dangling=true) &> /dev/null
993 echo -e "$GREEN Done$EGREEN"
996 CONTRS=$(docker ps | awk '$1 != "CONTAINER" { n++ }; END { print n+0 }')
997 if [ $? -eq 0 ]; then
998 if [ $CONTRS -ne 0 ]; then
999 echo -e $RED"Containers running, may cause distubance to the test case"$ERED
1005 # Function stop and remove all container in the end of the test script, if the arg 'auto-clean' is given at test script start
1007 # (Function for test scripts)
1008 auto_clean_containers() {
1010 if [ "$AUTO_CLEAN" == "auto" ]; then
1011 echo -e $BOLD"Initiating automatic cleaning of started containers"$EBOLD
1016 # Function to sleep a test case for a numner of seconds. Prints the optional text args as info
1017 # args: <sleep-time-in-sec> [any-text-in-quotes-to-be-printed]
1018 # (Function for test scripts)
1021 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
1022 if [ $# -lt 1 ]; then
1024 __print_err "need at least one arg, <sleep-time-in-sec> [any-text-to-printed]" $@
1027 #echo "---- Sleep for " $1 " seconds ---- "$2
1029 duration=$((SECONDS-start))
1030 while [ $duration -lt $1 ]; do
1031 echo -ne " Slept for ${duration} seconds${SAMELINE}"
1033 duration=$((SECONDS-start))
1035 echo -ne " Slept for ${duration} seconds${SAMELINE}"
1039 # Print error info for the call in the parent script (test case). Arg: <error-message-to-print>
1040 # Not to be called from the test script itself.
1042 echo -e $RED ${FUNCNAME[1]} " "$1" " ${BASH_SOURCE[2]} " line" ${BASH_LINENO[1]} $ERED
1043 if [ $# -gt 1 ]; then
1044 echo -e $RED" Got: "${FUNCNAME[1]} ${@:2} $ERED
1049 # Helper function to get a the port of a specific ric simulatpor
1051 # (Not for test scripts)
1053 name=$1" " #Space appended to prevent matching 10 if 1 is desired....
1054 cmdstr="docker inspect --format='{{(index (index .NetworkSettings.Ports \"$RIC_SIM_PORT/tcp\") 0).HostPort}}' ${name}"
1056 if [[ "$res" =~ ^[0-9]+$ ]]; then
1063 # Function to create the docker network for the test
1064 # Not to be called from the test script itself.
1065 __create_docker_network() {
1066 tmp=$(docker network ls --format={{.Name}} --filter name=$DOCKER_SIM_NWNAME)
1067 if [ $? -ne 0 ]; then
1068 echo -e $RED" Could not check if docker network $DOCKER_SIM_NWNAME exists"$ERED
1071 if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
1072 echo -e " Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
1073 docker network create $DOCKER_SIM_NWNAME | indent2
1074 if [ $? -ne 0 ]; then
1075 echo -e $RED" Could not create docker network $DOCKER_SIM_NWNAME"$ERED
1078 echo -e "$GREEN Done$EGREEN"
1081 echo -e " Docker network $DOCKER_SIM_NWNAME already exists$GREEN OK $EGREEN"
1085 # Check if container is started by calling url on localhost using a port, expects response code 2XX
1086 # args: <container-name> <port> <url> https|https
1087 # Not to be called from the test script itself.
1088 __check_container_start() {
1090 if [ $# -ne 4 ]; then
1092 elif [ $4 != "http" ] && [ $4 != "https" ]; then
1095 if [ $paramError -ne 0 ]; then
1097 __print_err "need 3 args, <container-name> <port> <url> https|https" $@
1100 echo -ne " Container $BOLD$1$EBOLD starting${SAMELINE}"
1104 if [[ $appname != "STANDALONE_"* ]] ; then
1106 for i in {1..10}; do
1107 if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
1108 echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
1115 if [ $app_started -eq 0 ]; then
1118 echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
1121 if [ $localport -eq 0 ]; then
1122 while [ $localport -eq 0 ]; do
1123 echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
1124 localport=$(__find_sim_port $appname)
1126 echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
1128 echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
1134 echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
1136 for i in {1..50}; do
1137 if [ $4 == "https" ]; then
1138 result="$(__do_curl "-k https://localhost:"${localport}${url})"
1140 result="$(__do_curl $LOCALHOST${localport}${url})"
1142 if [ $? -eq 0 ]; then
1143 if [ ${#result} -gt 15 ]; then
1144 #If response is too long, truncate
1145 result="...response text too long, omitted"
1147 echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
1148 echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN after $(($SECONDS-$TSTART)) seconds"
1153 while [ $(($TS_TMP+$i)) -gt $SECONDS ]; do
1154 echo -ne " Waiting for container ${appname} service status...retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
1160 if [ "$pa_st" = "false" ]; then
1162 echo -e $RED" Container ${appname} did not respond to service status"$ERED
1171 # Function to start a container and wait until it responds on the given port and url.
1172 #args: <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> [<app-name> <port-number> <alive-url>]*
1173 __start_container() {
1175 variableArgCount=$(($#-2))
1176 if [ $# -lt 6 ] && [ [ $(($variableArgCount%4)) -ne 0 ]; then
1178 __print_err "need 6 or more args, <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> http|https [<app-name> <port-number> <alive-url> http|https ]*" $@
1182 __create_docker_network
1188 if [ "$2" == "NODOCKERARGS" ]; then
1189 docker-compose up -d &> .dockererr
1190 if [ $? -ne 0 ]; then
1191 echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
1194 elif [ "$2" == "STANDALONE" ]; then
1195 echo "Skipping docker-compose"
1197 docker-compose up -d $2 &> .dockererr
1198 if [ $? -ne 0 ]; then
1199 echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
1204 if [ "$2" == "STANDALONE" ]; then
1205 app_prefix="STANDALONE_"
1209 while [ $cntr -lt $variableArgCount ]; do
1210 app=$app_prefix$1; shift;
1216 __check_container_start "$app" "$port" "$url" $httpx
1224 # Generate a UUID to use as prefix for policy ids
1226 UUID=$(python3 -c 'import sys,uuid; sys.stdout.write(uuid.uuid4().hex)')
1227 #Reduce length to make space for serial id, us 'a' as marker where the serial id is added
1228 UUID=${UUID:0:${#UUID}-4}"a"
1231 ####################
1232 ### Consul functions
1233 ####################
1235 # Function to load config from a file into consul for the Policy Agent
1236 # arg: <json-config-file>
1237 # (Function for test scripts)
1238 consul_config_app() {
1240 echo -e $BOLD"Configuring Consul"$EBOLD
1242 if [ $# -ne 1 ]; then
1244 __print_err "need one arg, <json-config-file>" $@
1248 echo " Loading config for "$POLICY_AGENT_APP_NAME" from "$1
1250 curl -s $LOCALHOST${CONSUL_EXTERNAL_PORT}/v1/kv/${POLICY_AGENT_APP_NAME}?dc=dc1 -X PUT -H 'Accept: application/json' -H 'Content-Type: application/json' -H 'X-Requested-With: XMLHttpRequest' --data-binary "@"$1 >/dev/null
1251 if [ $? -ne 0 ]; then
1252 echo -e $RED" FAIL - json config could not be loaded to consul" $ERED
1256 body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
1257 echo $body > ".output"$1
1259 if [ $? -ne 0 ]; then
1260 echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
1265 targetJson="{\"config\":"$targetJson"}"
1266 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1267 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1268 if [ $res -ne 0 ]; then
1269 echo -e $RED" FAIL - policy json config read from consul/cbs is not equal to the intended json config...." $ERED
1273 echo -e $GREEN" Config loaded ok to consul"$EGREEN
1281 # Function to perpare the consul configuration according to the current simulator configuration
1282 # args: SDNC|NOSDNC <output-file>
1283 # (Function for test scripts)
1284 prepare_consul_config() {
1285 echo -e $BOLD"Prepare Consul config"$EBOLD
1287 echo " Writing consul config for "$POLICY_AGENT_APP_NAME" to file: "$2
1289 if [ $# != 2 ]; then
1291 __print_err "need two args, SDNC|NOSDNC <output-file>" $@
1295 if [ $1 == "SDNC" ]; then
1296 echo -e " Config$BOLD including SDNC$EBOLD configuration"
1297 elif [ $1 == "NOSDNC" ]; then
1298 echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
1301 __print_err "need two args, SDNC|NOSDNC <output-file>" $@
1306 if [ $1 == "SDNC" ]; then
1307 config_json=$config_json"\n \"controller\": ["
1308 config_json=$config_json"\n {"
1309 config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
1310 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1311 config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
1313 config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
1315 config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
1316 config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
1317 config_json=$config_json"\n }"
1318 config_json=$config_json"\n ],"
1321 config_json=$config_json"\n \"streams_publishes\": {"
1322 config_json=$config_json"\n \"dmaap_publisher\": {"
1323 config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
1324 config_json=$config_json"\n \"dmaap_info\": {"
1325 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1326 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
1328 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
1330 config_json=$config_json"\n }"
1331 config_json=$config_json"\n }"
1332 config_json=$config_json"\n },"
1333 config_json=$config_json"\n \"streams_subscribes\": {"
1334 config_json=$config_json"\n \"dmaap_subscriber\": {"
1335 config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
1336 config_json=$config_json"\n \"dmaap_info\": {"
1337 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1338 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
1340 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
1342 config_json=$config_json"\n }"
1343 config_json=$config_json"\n }"
1344 config_json=$config_json"\n },"
1346 config_json=$config_json"\n \"ric\": ["
1348 rics=$(docker ps | grep $RIC_SIM_PREFIX | awk '{print $NF}')
1350 if [ $? -ne 0 ] || [ -z "$rics" ]; then
1351 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
1357 for ric in $rics; do
1358 if [ $cntr -gt 0 ]; then
1359 config_json=$config_json"\n ,"
1361 config_json=$config_json"\n {"
1362 config_json=$config_json"\n \"name\": \"$ric\","
1363 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1364 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
1366 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
1368 if [ $1 == "SDNC" ]; then
1369 config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
1371 config_json=$config_json"\n \"managedElementIds\": ["
1372 config_json=$config_json"\n \"me1_$ric\","
1373 config_json=$config_json"\n \"me2_$ric\""
1374 config_json=$config_json"\n ]"
1375 config_json=$config_json"\n }"
1379 config_json=$config_json"\n ]"
1380 config_json=$config_json"\n}"
1383 printf "$config_json">$2
1389 # Start Consul and CBS
1391 # (Function for test scripts)
1392 start_consul_cbs() {
1394 echo -e $BOLD"Starting Consul and CBS"$EBOLD
1395 __check_excluded_image 'CONSUL'
1396 if [ $? -eq 1 ]; then
1397 echo -e $RED"The Consul image has not been checked for this test run due to arg to the test script"$ERED
1398 echo -e $RED"Consul will not be started"$ERED
1401 __start_container consul_cbs NODOCKERARGS "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" "http" \
1402 "$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck" "http"
1405 ###########################
1406 ### RIC Simulator functions
1407 ###########################
1409 use_simulator_http() {
1410 echo -e "Using $BOLD http $EBOLD towards the simulators"
1411 export RIC_SIM_HTTPX="http"
1412 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1413 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
1417 use_simulator_https() {
1418 echo -e "Using $BOLD https $EBOLD towards the simulators"
1419 export RIC_SIM_HTTPX="https"
1420 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1421 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
1425 # Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
1426 # 'ricsim' may be set on command line to other prefix
1427 # args: ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
1428 # (Function for test scripts)
1429 start_ric_simulators() {
1431 echo -e $BOLD"Starting RIC Simulators"$EBOLD
1433 __check_excluded_image 'RICSIM'
1434 if [ $? -eq 1 ]; then
1435 echo -e $RED"The Near-RT RIC Simulator image has not been checked for this test run due to arg to the test script"$ERED
1436 echo -e $RED"The Near-RT RIC Simulartor(s) will not be started"$ERED
1440 RIC1=$RIC_SIM_PREFIX"_g1"
1441 RIC2=$RIC_SIM_PREFIX"_g2"
1442 RIC3=$RIC_SIM_PREFIX"_g3"
1444 if [ $# != 3 ]; then
1446 __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
1449 echo " $2 simulators using basename: $1 on interface: $3"
1450 #Set env var for simulator count and A1 interface vesion for the given group
1451 if [ $1 == "$RIC1" ]; then
1454 elif [ $1 == "$RIC2" ]; then
1457 elif [ $1 == "$RIC3" ]; then
1462 __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
1466 # Create .env file to compose project, all ric container will get this prefix
1467 echo "COMPOSE_PROJECT_NAME="$RIC_SIM_PREFIX > $SIM_GROUP/ric/.env
1469 export G1_A1_VERSION
1470 export G2_A1_VERSION
1471 export G3_A1_VERSION
1473 docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT"
1476 while [ $cntr -le $2 ]; do
1479 app_data="$app_data $app $port / "$RIC_SIM_HTTPX
1482 __start_container ric "$docker_args" $app_data
1486 ###########################
1487 ### Control Panel functions
1488 ###########################
1490 # Start the Control Panel container
1492 # (Function for test scripts)
1493 start_control_panel() {
1495 echo -e $BOLD"Starting Control Panel"$EBOLD
1496 __check_excluded_image 'CP'
1497 if [ $? -eq 1 ]; then
1498 echo -e $RED"The Control Panel image has not been checked for this test run due to arg to the test script"$ERED
1499 echo -e $RED"The Control Panel will not be started"$ERED
1502 __start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/" "http"
1510 # Start the SDNC A1 Controller
1512 # (Function for test scripts)
1515 echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
1517 __check_excluded_image 'SDNC'
1518 if [ $? -eq 1 ]; then
1519 echo -e $RED"The image for SDNC and the related DB has not been checked for this test run due to arg to the test script"$ERED
1520 echo -e $RED"SDNC will not be started"$ERED
1524 __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
1529 echo -e "Using $BOLD http $EBOLD towards SDNC"
1530 export SDNC_HTTPX="http"
1531 export SDNC_PORT=$SDNC_INTERNAL_PORT
1532 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
1537 echo -e "Using $BOLD https $EBOLD towards SDNC"
1538 export SDNC_HTTPX="https"
1539 export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
1540 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
1544 #####################
1545 ### MR stub functions
1546 #####################
1548 # Start the Message Router stub interface in the simulator group
1550 # (Function for test scripts)
1553 echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
1554 __check_excluded_image 'MR'
1555 if [ $? -eq 1 ]; then
1556 echo -e $RED"The Message Router image has not been checked for this test run due to arg to the test script"$ERED
1557 echo -e $RED"The Message Router will not be started"$ERED
1560 export MR_CERT_MOUNT_DIR="./cert"
1561 __start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
1565 echo -e "Using $BOLD http $EBOLD towards MR"
1566 export MR_HTTPX="http"
1567 export MR_PORT=$MR_INTERNAL_PORT
1568 export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
1573 echo -e "Using $BOLD https $EBOLD towards MR"
1574 export MR_HTTPX="https"
1575 export MR_PORT=$MR_INTERNAL_SECURE_PORT
1576 export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
1585 # Start the Callback reciver in the simulator group
1587 # (Function for test scripts)
1590 echo -e $BOLD"Starting Callback Receiver"$EBOLD
1591 __check_excluded_image 'CR'
1592 if [ $? -eq 1 ]; then
1593 echo -e $RED"The Callback Receiver image has not been checked for this test run due to arg to the test script"$ERED
1594 echo -e $RED"The Callback Receiver will not be started"$ERED
1597 __start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/" "http"
1602 echo -e "Using $BOLD http $EBOLD towards CR"
1603 export CR_HTTPX="http"
1604 export CR_PORT=$CR_INTERNAL_PORT
1605 export CR_LOCAL_PORT=$CR_EXTERNAL_PORT
1610 echo -e "Using $BOLD https $EBOLD towards CR"
1611 export CR_HTTPX="https"
1612 export CR_PORT=$CR_INTERNAL_SECURE_PORT
1613 export CR_LOCAL_PORT=$CR_EXTERNAL_SECURE_PORT
1617 ###########################
1618 ### Policy Agents functions
1619 ###########################
1621 # Use an agent on the local machine instead of container
1622 use_agent_stand_alone() {
1626 # Start the policy agent
1628 # (Function for test scripts)
1629 start_policy_agent() {
1631 echo -e $BOLD"Starting Policy Agent"$EBOLD
1633 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1634 __check_excluded_image 'PA'
1635 if [ $? -eq 1 ]; then
1636 echo -e $RED"The Policy Agent image has not been checked for this test run due to arg to the test script"$ERED
1637 echo -e $RED"The Policy Agent will not be started"$ERED
1640 __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1642 echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
1643 echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
1644 echo -e $RED"application.yaml"$ERED
1645 echo -e $RED"The application jar may need to be built before continuing"$ERED
1646 echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
1648 read -p "<press any key to continue>"
1649 __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1654 # All calls to the agent will be directed to the agent REST interface from now on
1656 # (Function for test scripts)
1657 use_agent_rest_http() {
1658 echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent"
1659 export ADAPTER=$RESTBASE
1663 # All calls to the agent will be directed to the agent REST interface from now on
1665 # (Function for test scripts)
1666 use_agent_rest_https() {
1667 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
1668 export ADAPTER=$RESTBASE_SECURE
1673 # All calls to the agent will be directed to the agent dmaap interface over http from now on
1675 # (Function for test scripts)
1676 use_agent_dmaap_http() {
1677 echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
1678 export ADAPTER=$DMAAPBASE
1683 # All calls to the agent will be directed to the agent dmaap interface over https from now on
1685 # (Function for test scripts)
1686 use_agent_dmaap_https() {
1687 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
1688 export ADAPTER=$DMAAPBASE_SECURE
1693 # Turn on debug level tracing in the agent
1695 # (Function for test scripts)
1697 echo -e $BOLD"Setting agent debug"$EBOLD
1698 curl $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"debug"}' &> /dev/null
1699 if [ $? -ne 0 ]; then
1700 __print_err "could not set debug mode" $@
1707 # Turn on trace level tracing in the agent
1709 # (Function for test scripts)
1711 echo -e $BOLD"Setting agent trace"$EBOLD
1712 curl $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"trace"}' &> /dev/null
1713 if [ $? -ne 0 ]; then
1714 __print_err "could not set trace mode" $@
1721 # Perform curl retries when making direct call to the agent for the specified http response codes
1722 # Speace separated list of http response codes
1723 # args: [<response-code>]*
1724 use_agent_retries() {
1725 echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
1726 AGENT_RETRY_CODES=$@
1731 ###########################
1733 ###########################
1737 # (Function for test scripts)
1740 echo -e $BOLD"Starting ECS"$EBOLD
1741 __check_excluded_image 'ECS'
1742 if [ $? -eq 1 ]; then
1743 echo -e $RED"The ECS image has not been checked for this test run due to arg to the test script"$ERED
1744 echo -e $RED"ECS will not be started"$ERED
1747 export ECS_CERT_MOUNT_DIR="./cert"
1748 __start_container ecs NODOCKERARGS $ECS_APP_NAME $ECS_EXTERNAL_PORT "/ei-producer/v1/eiproducers" "http"
1751 # All calls to ECS will be directed to the ECS REST interface from now on
1753 # (Function for test scripts)
1754 use_ecs_rest_http() {
1755 echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
1756 export ECS_ADAPTER=$ECS_RESTBASE
1760 # All calls to ECS will be directed to the ECS REST interface from now on
1762 # (Function for test scripts)
1763 use_ecs_rest_https() {
1764 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
1765 export ECS_ADAPTER=$ECS_RESTBASE_SECURE
1770 # All calls to ECS will be directed to the ECS dmaap interface over http from now on
1772 # (Function for test scripts)
1773 use_ecs_dmaap_http() {
1774 echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
1775 export ECS_ADAPTER=$ECS_DMAAPBASE
1780 # All calls to ECS will be directed to the ECS dmaap interface over https from now on
1782 # (Function for test scripts)
1783 use_ecs_dmaap_https() {
1784 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
1785 export ECS_ADAPTER=$ECS_DMAAPBASE_SECURE
1790 # Turn on debug level tracing in ECS
1792 # (Function for test scripts)
1794 echo -e $BOLD"Setting ecs debug"$EBOLD
1795 curl $LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"debug"}' &> /dev/null
1796 if [ $? -ne 0 ]; then
1797 __print_err "could not set debug mode" $@
1804 # Turn on trace level tracing in ECS
1806 # (Function for test scripts)
1808 echo -e $BOLD"Setting agent trace"$EBOLD
1809 curl $LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H 'Content-Type: application/json' -d '{"configuredLevel":"trace"}' &> /dev/null
1810 if [ $? -ne 0 ]; then
1811 __print_err "could not set trace mode" $@
1818 # Perform curl retries when making direct call to ECS for the specified http response codes
1819 # Speace separated list of http response codes
1820 # args: [<response-code>]*
1821 use_agent_retries() {
1822 echo -e $BOLD"Do curl retries to the ECS REST inteface for these response codes:$@"$EBOLD
1823 ECS_AGENT_RETRY_CODES=$@
1832 # Check the agent logs for WARNINGs and ERRORs
1834 # (Function for test scripts)
1836 check_policy_agent_logs() {
1837 __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH
1841 __check_container_logs "ECS" $ECS_APP_NAME $ECS_LOGPATH
1844 check_control_panel_logs() {
1845 __check_container_logs "Control Panel" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_LOGPATH
1848 __check_container_logs() {
1852 echo -e $BOLD"Checking $dispname container $appname log ($logpath) for WARNINGs and ERRORs"$EBOLD
1854 #tmp=$(docker ps | grep $appname)
1855 tmp=$(docker ps -q --filter name=$appname) #get the container id
1856 if [ -z "$tmp" ]; then #Only check logs for running Policy Agent apps
1857 echo $dispname" is not running, no check made"
1860 foundentries="$(docker exec $tmp grep WARN $logpath | wc -l)"
1861 if [ $? -ne 0 ];then
1862 echo " Problem to search $appname log $logpath"
1864 if [ $foundentries -eq 0 ]; then
1865 echo " No WARN entries found in $appname log $logpath"
1867 echo -e " Found \033[1m"$foundentries"\033[0m WARN entries in $appname log $logpath"
1870 foundentries="$(docker exec $tmp grep ERR $logpath | wc -l)"
1871 if [ $? -ne 0 ];then
1872 echo " Problem to search $appname log $logpath"
1874 if [ $foundentries -eq 0 ]; then
1875 echo " No ERR entries found in $appname log $logpath"
1877 echo -e $RED" Found \033[1m"$foundentries"\033[0m"$RED" ERR entries in $appname log $logpath"$ERED
1883 # Store all container logs and other logs in the log dir for the script
1884 # Logs are stored with a prefix in case logs should be stored several times during a test
1885 # args: <logfile-prefix>
1886 # (Function for test scripts)
1888 if [ $# != 1 ]; then
1890 __print_err "need one arg, <file-prefix>" $@
1893 echo -e $BOLD"Storing all container logs using prefix: "$1$EBOLD
1895 docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
1896 docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
1897 docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
1898 docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
1899 docker logs $ECS_APP_NAME > $TESTLOGS/$ATC/$1_ecs.log 2>&1
1900 docker logs $CONTROL_PANEL_APP_NAME > $TESTLOGS/$ATC/$1_control-panel.log 2>&1
1901 docker logs $MR_APP_NAME > $TESTLOGS/$ATC/$1_mr.log 2>&1
1902 docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
1903 cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
1905 docker exec $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
1907 rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
1908 for ric in $rics; do
1909 docker logs $ric > $TESTLOGS/$ATC/$1_$ric.log 2>&1
1911 body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
1912 echo "$body" > $TESTLOGS/$ATC/$1_consul_config.json 2>&1
1919 # Generic curl function, assumed all 200-codes are ok
1921 # returns: <returned response (without respose code)> or "<no-response-from-server>" or "<not found, <http-code>>""
1922 # returns: The return code is 0 for ok and 1 for not ok
1924 echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
1925 curlString="curl -skw %{http_code} $1"
1926 echo " CMD: $curlString" >> $HTTPLOG
1928 echo " RESP: $res" >> $HTTPLOG
1929 http_code="${res:${#res}-3}"
1930 if [ ${#res} -eq 3 ]; then
1931 echo "<no-response-from-server>"
1934 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
1935 echo "<not found, resp:${http_code}>"
1938 if [ $# -eq 2 ]; then
1939 echo "${res:0:${#res}-3}" | xargs
1941 echo "${res:0:${#res}-3}"
1948 #######################################
1949 ### Basic helper function for test cases
1950 #######################################
1952 # Test a simulator container variable value towards target value using an condition operator with an optional timeout.
1953 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> - This test is done
1954 # immediately and sets pass or fail depending on the result of comparing variable and target using the operator.
1955 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> <timeout> - This test waits up to the timeout
1956 # before setting pass or fail depending on the result of comparing variable and target using the operator.
1957 # If the <variable-name> has the 'json:' prefix, the the variable will be used as url and the <target-value> will be compared towards the length of the json array in the response.
1958 # Not to be called from test script.
1961 checkjsonarraycount=0
1963 if [ $# -eq 6 ]; then
1964 if [[ $3 == "json:"* ]]; then
1965 checkjsonarraycount=1
1968 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
1973 if [ $checkjsonarraycount -eq 0 ]; then
1974 result="$(__do_curl $2$3)"
1976 result=${result//[[:blank:]]/} #Strip blanks
1979 result="$(__do_curl $2$path)"
1981 echo "$result" > .tmp.curl.json
1982 result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
1984 duration=$((SECONDS-start))
1985 echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
1987 if [ $retcode -ne 0 ]; then
1988 if [ $duration -gt $6 ]; then
1990 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
1991 __check_stop_at_error
1994 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
1996 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
1997 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
1999 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2001 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2002 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2004 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2006 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2007 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2009 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2011 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2012 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2015 if [ $duration -gt $6 ]; then
2017 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
2018 __check_stop_at_error
2024 elif [ $# -eq 5 ]; then
2025 if [[ $3 == "json:"* ]]; then
2026 checkjsonarraycount=1
2029 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
2031 if [ $checkjsonarraycount -eq 0 ]; then
2032 result="$(__do_curl $2$3)"
2034 result=${result//[[:blank:]]/} #Strip blanks
2037 result="$(__do_curl $2$path)"
2039 echo "$result" > .tmp.curl.json
2040 result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
2042 if [ $retcode -ne 0 ]; then
2044 echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
2045 __check_stop_at_error
2046 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
2048 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2049 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2051 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2052 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2054 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2055 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2057 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2060 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
2061 __check_stop_at_error
2064 echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
2071 ### Generic test cases for varaible checking
2073 # Tests if a variable value in the CR is equal to a target value and and optional timeout.
2074 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2075 # equal to the target or not.
2076 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2077 # before setting pass or fail depending on if the variable value becomes equal to the target
2079 # (Function for test scripts)
2081 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2082 __var_test "CR" "$LOCALHOST$CR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
2085 __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2089 # Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
2090 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2091 # equal to the target or not.
2092 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2093 # before setting pass or fail depending on if the variable value becomes equal to the target
2095 # (Function for test scripts)
2097 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2098 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
2101 __print_err "Wrong args to mr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2105 # Tests if a variable value in the MR stub is greater than a target value and and optional timeout.
2106 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2107 # greater than the target or not.
2108 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2109 # before setting pass or fail depending on if the variable value becomes greater than the target
2111 # (Function for test scripts)
2113 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2114 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 ">" $2 $3
2117 __print_err "Wrong args to mr_greater, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2121 # Read a variable value from MR sim and send to stdout. Arg: <variable-name>
2123 echo "$(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"
2126 # Print a variable value from the MR stub.
2127 # arg: <variable-name>
2128 # (Function for test scripts)
2130 if [ $# != 1 ]; then
2132 __print_err "need one arg, <mr-param>" $@
2135 echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD