test/common/testcase_common.sh

   1 #!/bin/bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 # This is a script that contains all the functions needed for auto test
  21 # Arg: local|remote|remote-remove [auto-clean]
  22
  23
  24 #Formatting for 'echo' cmd
  25 BOLD="\033[1m"
  26 EBOLD="\033[0m"
  27 RED="\033[31m\033[1m"
  28 ERED="\033[0m"
  29 GREEN="\033[32m\033[1m"
  30 EGREEN="\033[0m"
  31 YELLOW="\033[33m\033[1m"
  32 EYELLOW="\033[0m"
  33 SAMELINE="\033[0K\r"
  34
  35 tmp=$(which python3)
  36 if [ $? -ne 0 ] || [ -z tmp ]; then
  37         echo -e $RED"python3 is required to run the test environment, pls install"$ERED
  38         exit 1
  39 fi
  40 tmp=$(which docker)
  41 if [ $? -ne 0 ] || [ -z tmp ]; then
  42         echo -e $RED"docker is required to run the test environment, pls install"$ERED
  43         exit 1
  44 fi
  45
  46 # Just resetting any previous echo formatting...
  47 echo -ne $EBOLD
  48
  49 # source test environment variables
  50 . ../common/test_env.sh
  51
  52 echo "Test case started as: ${BASH_SOURCE[$i+1]} "$@
  53
  54 #Vars for A1 interface version and container count
  55 G1_A1_VERSION=""
  56 G2_A1_VERSION=""
  57 G3_A1_VERSION=""
  58 G1_COUNT=0
  59 G2_COUNT=0
  60 G3_COUNT=0
  61
  62 # Vars to switch between http and https. Extra curl flag needed for https
  63 export RIC_SIM_HTTPX="http"
  64 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
  65 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
  66 export RIC_SIM_CERT_MOUNT_DIR="./fakedir"  #Fake dir so that the sim container does not find any cert
  67
  68 export MR_HTTPX="http"
  69 export MR_PORT=$MR_INTERNAL_PORT
  70 export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
  71
  72 export SDNC_HTTPX="http"
  73 export SDNC_PORT=$SDNC_INTERNAL_PORT
  74 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
  75
  76 #Localhost constant
  77 LOCALHOST="http://localhost:"
  78
  79 # Make curl retries for http response codes set in this env var, space separated list of codes
  80 AGENT_RETRY_CODES=""
  81
  82 # Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
  83 AGENT_STAND_ALONE=0
  84
  85 # Var to hold 'auto' in case containers shall be stopped when test case ends
  86 AUTO_CLEAN=""
  87
  88 # Set a description string for the test case
  89 if [ -z "$TC_ONELINE_DESCR" ]; then
  90         TC_ONELINE_DESCR="<no-description>"
  91         echo "No test case description found, TC_ONELINE_DESCR should be set on in the test script , using "$TC_ONELINE_DESCR
  92 fi
  93
  94 # Counter for test suites
  95 if [ -f .tmp_tcsuite_ctr ]; then
  96         tmpval=$(< .tmp_tcsuite_ctr)
  97         ((tmpval++))
  98         echo $tmpval > .tmp_tcsuite_ctr
  99 fi
 100
 101 # Create a test case id, ATC (Auto Test Case), from the name of the test case script.
 102 # FTC1.sh -> ATC == FTC1
 103 ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
 104
 105 # Create the logs dir if not already created in the current dir
 106 if [ ! -d "logs" ]; then
 107     mkdir logs
 108 fi
 109 TESTLOGS=$PWD/logs
 110
 111 # Create a http message log for this testcase
 112 HTTPLOG=$PWD"/.httplog_"$ATC".txt"
 113 echo "" > $HTTPLOG
 114
 115 # Create a log dir for the test case
 116 mkdir -p $TESTLOGS/$ATC
 117
 118 # Clear the log dir for the test case
 119 rm $TESTLOGS/$ATC/*.log &> /dev/null
 120 rm $TESTLOGS/$ATC/*.txt &> /dev/null
 121 rm $TESTLOGS/$ATC/*.json &> /dev/null
 122
 123 # Log all output from the test case to a TC log
 124 TCLOG=$TESTLOGS/$ATC/TC.log
 125 exec &>  >(tee ${TCLOG})
 126
 127 #Variables for counting tests as well as passed and failed tests
 128 RES_TEST=0
 129 RES_PASS=0
 130 RES_FAIL=0
 131 RES_CONF_FAIL=0
 132 RES_DEVIATION=0
 133
 134 #File to keep deviation messages
 135 DEVIATION_FILE=".tmp_deviations"
 136 rm $DEVIATION_FILE &> /dev/null
 137
 138 #Var for measuring execution time
 139 TCTEST_START=$SECONDS
 140
 141 #File to save timer measurement results
 142 TIMER_MEASUREMENTS=".timer_measurement.txt"
 143 echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
 144
 145
 146 echo "-------------------------------------------------------------------------------------------------"
 147 echo "-----------------------------------      Test case: "$ATC
 148 echo "-----------------------------------      Started:   "$(date)
 149 echo "-------------------------------------------------------------------------------------------------"
 150 echo "-- Description: "$TC_ONELINE_DESCR
 151 echo "-------------------------------------------------------------------------------------------------"
 152 echo "-----------------------------------      Test case setup      -----------------------------------"
 153
 154 echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
 155
 156 #Temp var to check for image variable name errors
 157 IMAGE_ERR=0
 158 #Create a file with image info for later printing as a table
 159 image_list_file=".image-list"
 160 echo -e " Container\tImage\ttag" > $image_list_file
 161
 162 # Check if image env var is set and if so export the env var with image to use (used by docker compose files)
 163 # arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name>
 164 __check_image_var() {
 165         if [ $# -ne 5 ]; then
 166                 echo "Expected arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name>"
 167                 ((IMAGE_ERR++))
 168                 return
 169         fi
 170         tmp=${1}"\t"
 171         #Create var from the input var names
 172         image="${!4}"
 173         tag="${!5}"
 174
 175         if [ -z $image ]; then
 176                 echo -e $RED"\$"$4" not set in test_env"$ERED
 177                 ((IMAGE_ERR++))
 178                 echo ""
 179                 tmp=$tmp"<no-image>\t"
 180         else
 181                 tmp=$tmp$image"\t"
 182         fi
 183         if [ -z $tag ]; then
 184                 echo -e $RED"\$"$5" not set in test_env"$ERED
 185                 ((IMAGE_ERR++))
 186                 echo ""
 187                 tmp=$tmp"<no-tag>\t"
 188         else
 189                 tmp=$tmp$tag
 190         fi
 191         echo -e "$tmp" >> $image_list_file
 192         #Export the env var
 193         export "${3}"=$image":"$tag
 194
 195         #echo " Configured image for ${1} (script start arg=${2}): "$image":"$tag
 196 }
 197
 198 # Check that image env setting are available
 199 echo ""
 200 if [ $# -lt 1 ] || [ $# -gt 2 ]; then
 201         echo "Expected arg: local|remote|remote-remove [auto-clean]"
 202         exit 1
 203 elif [ $1 == "local" ]; then
 204
 205         #Local agent image
 206         __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG"
 207
 208         #Local Control Panel image
 209         __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG"
 210
 211         #Local SNDC image
 212         __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG"
 213
 214         #Local ric sim image
 215         __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG"
 216
 217 elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
 218
 219         #Remote agent image
 220         __check_image_var " Policy Agent" $1 "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG"
 221
 222         #Remote Control Panel image
 223         __check_image_var " Control Panel" $1 "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG"
 224
 225         #Remote SDNC image
 226         __check_image_var " SDNC A1 Controller" $1 "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG"
 227
 228         #Remote ric sim image
 229         __check_image_var " RIC Simulator" $1 "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG"
 230
 231 else
 232         echo "Expected arg: local|remote|remote-remove [auto-clean]"
 233         exit 1
 234 fi
 235
 236 if [ $# -eq 2 ]; then
 237         if [ $2 == "auto-clean" ]; then
 238                 echo "Stting automatic cleaning of container when test case ends"
 239                 AUTO_CLEAN="auto"
 240         else
 241                 echo "Expected arg: local|remote|remote-remove [auto-clean]"
 242                 exit 1
 243         fi
 244 fi
 245
 246 # These images are not built as part of this project official images, just check that env vars are set correctly
 247 __check_image_var " Message Router" $1 "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG"
 248 __check_image_var " Callback Receiver" $1 "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG"
 249 __check_image_var " Consul" $1 "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG"
 250 __check_image_var " CBS" $1 "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG"
 251 __check_image_var " SDNC DB" $1 "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG"
 252 __check_image_var " SDNC ONAP A1 Adapter" $1 "SDNC_ONAP_A1_ADAPTER_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE" "SDNC_ONAP_A1_ADAPTER_REMOTE_IMAGE_TAG"
 253 __check_image_var " SDNC ONAP DB" $1 "SDNC_ONAP_DB_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE" "SDNC_ONAP_DB_REMOTE_IMAGE_TAG"
 254
 255 #Errors in image setting - exit
 256 if [ $IMAGE_ERR -ne 0 ]; then
 257         exit 1
 258 fi
 259
 260 #Print a tables of the image settings
 261 echo -e $BOLD"Images configured for start arg: "$1 $EBOLD
 262 column -t -s $'\t' $image_list_file
 263
 264 echo ""
 265
 266
 267 #Set the SIM_GROUP var
 268 echo -e $BOLD"Setting var to main dir of all container/simulator scripts"$EBOLD
 269 if [ -z "$SIM_GROUP" ]; then
 270         SIM_GROUP=$PWD/../simulator-group
 271         if [ ! -d  $SIM_GROUP ]; then
 272                 echo "Trying to set env var SIM_GROUP to dir 'simulator-group' in the nontrtric repo, but failed."
 273                 echo -e $RED"Please set the SIM_GROUP manually in the test_env.sh"$ERED
 274                 exit 1
 275         else
 276                 echo " SIM_GROUP auto set to: " $SIM_GROUP
 277         fi
 278 elif [ $SIM_GROUP = *simulator_group ]; then
 279         echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check common/test_env.sh"$ERED
 280         exit 1
 281 else
 282         echo " SIM_GROUP env var already set to: " $SIM_GROUP
 283 fi
 284
 285 echo ""
 286
 287 #Temp var to check for image pull errors
 288 IMAGE_ERR=0
 289
 290 #Function to check if image exist and stop+remove the container+pull new images as needed
 291 #args <script-start-arg> <descriptive-image-name> <container-base-name> <image-with-tag>
 292 __check_and_pull_image() {
 293
 294         echo -e " Checking $BOLD$2$EBOLD container(s) with basename: $BOLD$3$EBOLD using image: $BOLD$4$EBOLD"
 295         format_string="\"{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\""
 296         tmp_im=$(docker images --format $format_string ${4})
 297
 298         if [ $1 == "local" ]; then
 299                 if [ -z "$tmp_im" ]; then
 300                         echo -e "  "$2" (local image): \033[1m"$4"\033[0m $RED does not exist in local registry, need to be built (or manually pulled)"$ERED
 301                         ((IMAGE_ERR++))
 302                         return 1
 303                 else
 304                         echo -e "  "$2" (local image): \033[1m"$4"\033[0m "$GREEN"OK"$EGREEN
 305                 fi
 306         elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
 307                 if [ $1 == "remote-remove" ]; then
 308                         echo -ne "  Attempt to stop and remove container(s), if running - ${SAMELINE}"
 309                         tmp="$(docker ps -aq --filter name=${3})"
 310                         if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
 311                                 docker stop $tmp &> .dockererr
 312                                 if [ $? -ne 0 ]; then
 313                                         ((IMAGE_ERR++))
 314                                         echo ""
 315                                         echo -e $RED"  Container(s) could not be stopped - try manual stopping the container(s)"$ERED
 316                                         cat .dockererr
 317                                         return 1
 318                                 fi
 319                         fi
 320                         echo -ne "  Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
 321                         tmp="$(docker ps -aq --filter name=${3})" &> /dev/null
 322                         if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
 323                                 docker rm $tmp &> .dockererr
 324                                 if [ $? -ne 0 ]; then
 325                                         ((IMAGE_ERR++))
 326                                         echo ""
 327                                         echo -e $RED"  Container(s) could not be removed - try manual removal of the container(s)"$ERED
 328                                         cat .dockererr
 329                                         return 1
 330                                 fi
 331                         fi
 332                         echo -e "  Attempt to stop and remove container(s), if running - "$GREEN"stopped removed"$EGREEN
 333                         echo -ne "  Removing image - ${SAMELINE}"
 334                         tmp="$(docker images -q ${4})" &> /dev/null
 335                         if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
 336                                 docker rmi $4 &> .dockererr
 337                                 if [ $? -ne 0 ]; then
 338                                         ((IMAGE_ERR++))
 339                                         echo ""
 340                                         echo -e $RED"  Image could not be removed - try manual removal of the image"$ERED
 341                                         cat .dockererr
 342                                         return 1
 343                                 fi
 344                                 echo -e "  Removing image - "$GREEN"removed"$EGREEN
 345                         else
 346                                 echo -e "  Removing image - "$GREEN"image not in repository"$EGREEN
 347                         fi
 348                         tmp_im=""
 349                 fi
 350                 if [ -z "$tmp_im" ]; then
 351                         echo -ne "  Pulling image${SAMELINE}"
 352                         docker pull $4  &> .dockererr
 353                         tmp_im=$(docker images ${4} | grep -v REPOSITORY)
 354                         if [ -z "$tmp_im" ]; then
 355                                 echo ""
 356                                 echo -e "  Pulling image -$RED could not be pulled"$ERED
 357                                 ((IMAGE_ERR++))
 358                                 cat .dockererr
 359                                 return 1
 360                         fi
 361                         echo -e "  Pulling image -$GREEN Pulled $EGREEN"
 362                 else
 363                         echo -e "  Pulling image -$GREEN OK $EGREEN(exists in local repository)"
 364                 fi
 365         fi
 366         return 0
 367 }
 368
 369
 370 echo -e $BOLD"Pulling configured images, if needed"$EBOLD
 371
 372 app="Policy Agent";             __check_and_pull_image $1 "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
 373 app="Non-RT RIC Control Panel"; __check_and_pull_image $1 "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
 374 app="SDNC A1 Controller";       __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
 375 app="Near-RT RIC Simulator";    __check_and_pull_image $1 "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
 376
 377 app="Consul";                   __check_and_pull_image $1 "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
 378 app="CBS";                      __check_and_pull_image $1 "$app" $CBS_APP_NAME $CBS_IMAGE
 379 app="SDNC DB";                  __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
 380
 381 echo -e $YELLOW"SDNC ONAP image is skipped"$EYELLOW
 382 #app="SDNC ONAP A1 Adapter";     __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
 383 #app="SDNC ONAP DB";             __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
 384
 385 # MR stub image not checked, will be built by this script - only local image
 386 # CR stub image not checked, will be built by this script - only local image
 387
 388
 389 #Errors in image setting - exit
 390 if [ $IMAGE_ERR -ne 0 ]; then
 391         echo ""
 392         echo "#################################################################################################"
 393         echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
 394         echo "#################################################################################################"
 395         echo ""
 396         exit 1
 397 fi
 398
 399 echo ""
 400
 401 echo -e $BOLD"Building images needed for test"$EBOLD
 402
 403 curdir=$PWD
 404 cd $curdir
 405 cd ../mrstub
 406 echo " Building mrstub image: mrstub:latest"
 407 docker build -t mrstub . &> .dockererr
 408 if [ $? -eq 0 ]; then
 409         echo -e  $GREEN" Build Ok"$EGREEN
 410 else
 411         echo -e $RED" Build Failed"$ERED
 412         ((RES_CONF_FAIL++))
 413         cat .dockererr
 414 fi
 415 cd $curdir
 416
 417 cd ../cr
 418 echo " Building Callback Receiver image: callback-receiver:latest"
 419 docker build -t callback-receiver . &> .dockererr
 420 if [ $? -eq 0 ]; then
 421         echo -e  $GREEN" Build Ok"$EGREEN
 422 else
 423         echo -e $RED" Build Failed"$ERED
 424         ((RES_CONF_FAIL++))
 425         cat .dockererr
 426 fi
 427 cd $curdir
 428
 429 echo ""
 430
 431 # Create a table of the images used in the script
 432 echo -e $BOLD"Local docker registry images used in the this test script"$EBOLD
 433
 434 docker_tmp_file=.docker-images-table
 435 format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}"
 436 echo -e " Application\tRepository\tTag\tCreated Since\tSize" > $docker_tmp_file
 437 echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >>   $docker_tmp_file
 438 echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >>   $docker_tmp_file
 439 echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >>   $docker_tmp_file
 440 echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >>   $docker_tmp_file
 441 echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >>   $docker_tmp_file
 442 echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >>   $docker_tmp_file
 443 echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >>   $docker_tmp_file
 444 echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >>   $docker_tmp_file
 445 echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >>   $docker_tmp_file
 446 echo -e " SDNC ONAP A1 Adapter\t$(docker images --format $format_string $SDNC_ONAP_A1_ADAPTER_IMAGE)" >>   $docker_tmp_file
 447 echo -e " SDNC ONAP DB\t$(docker images --format $format_string $SDNC_ONAP_DB_IMAGE)" >>   $docker_tmp_file
 448
 449 column -t -s $'\t' $docker_tmp_file
 450
 451 echo ""
 452
 453 echo -e $BOLD"======================================================="$EBOLD
 454 echo -e $BOLD"== Common test setup completed -  test script begins =="$EBOLD
 455 echo -e $BOLD"======================================================="$EBOLD
 456 echo ""
 457
 458 # Function to print the test result, shall be the last cmd in a test script
 459 # args: -
 460 # (Function for test scripts)
 461 print_result() {
 462
 463         TCTEST_END=$SECONDS
 464         duration=$((TCTEST_END-TCTEST_START))
 465
 466         echo "-------------------------------------------------------------------------------------------------"
 467         echo "-------------------------------------     Test case: "$ATC
 468         echo "-------------------------------------     Ended:     "$(date)
 469         echo "-------------------------------------------------------------------------------------------------"
 470         echo "-- Description: "$TC_ONELINE_DESCR
 471         echo "-- Execution time: " $duration " seconds"
 472         echo "-------------------------------------------------------------------------------------------------"
 473         echo "-------------------------------------     RESULTS"
 474         echo ""
 475
 476
 477         total=$((RES_PASS+RES_FAIL))
 478         if [ $RES_TEST -eq 0 ]; then
 479                 echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
 480                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
 481                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
 482                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
 483                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
 484         elif [ $total != $RES_TEST ]; then
 485                 echo -e "\033[1mTotal number of tests does not match the sum of passed and failed tests. Check the script....\033[0m"
 486                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
 487                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
 488                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
 489                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
 490         elif [ $RES_CONF_FAIL -ne 0 ]; then
 491                 echo -e "\033[1mOne or more configure regest has failed. Check the script log....\033[0m"
 492                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
 493                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
 494                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
 495                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
 496         elif [ $RES_PASS = $RES_TEST ]; then
 497                 echo -e "All tests \033[32m\033[1mPASS\033[0m"
 498                 echo -e "\033[32m\033[1m  ___  _   ___ ___ \033[0m"
 499                 echo -e "\033[32m\033[1m | _ \/_\ / __/ __| \033[0m"
 500                 echo -e "\033[32m\033[1m |  _/ _ \\__ \__ \\ \033[0m"
 501                 echo -e "\033[32m\033[1m |_|/_/ \_\___/___/ \033[0m"
 502                 echo ""
 503
 504                 # Update test suite counter
 505                 if [ -f .tmp_tcsuite_pass_ctr ]; then
 506                         tmpval=$(< .tmp_tcsuite_pass_ctr)
 507                         ((tmpval++))
 508                         echo $tmpval > .tmp_tcsuite_pass_ctr
 509                 fi
 510                 if [ -f .tmp_tcsuite_pass ]; then
 511                         echo " - "$ATC " -- "$TC_ONELINE_DESCR"  Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
 512                 fi
 513         else
 514                 echo -e "One or more tests with status  \033[31m\033[1mFAIL\033[0m "
 515                 echo -e "\033[31m\033[1m  ___ _   ___ _    \033[0m"
 516                 echo -e "\033[31m\033[1m | __/_\ |_ _| |   \033[0m"
 517                 echo -e "\033[31m\033[1m | _/ _ \ | || |__ \033[0m"
 518                 echo -e "\033[31m\033[1m |_/_/ \_\___|____|\033[0m"
 519                 echo ""
 520                 # Update test suite counter
 521                 if [ -f .tmp_tcsuite_fail_ctr ]; then
 522                         tmpval=$(< .tmp_tcsuite_fail_ctr)
 523                         ((tmpval++))
 524                         echo $tmpval > .tmp_tcsuite_fail_ctr
 525                 fi
 526                 if [ -f .tmp_tcsuite_fail ]; then
 527                         echo " - "$ATC " -- "$TC_ONELINE_DESCR"  Execution time: "$duration" seconds" >> .tmp_tcsuite_fail
 528                 fi
 529         fi
 530
 531         if [ $RES_DEVIATION -gt 0 ]; then
 532                 echo "Test case deviations"
 533                 echo "===================================="
 534                 cat $DEVIATION_FILE
 535         fi
 536         echo ""
 537         echo "Timer measurement in the test script"
 538         echo "===================================="
 539         column -t -s $'\t' $TIMER_MEASUREMENTS
 540         echo ""
 541
 542         echo "++++ Number of tests:          "$RES_TEST
 543         echo "++++ Number of passed tests:   "$RES_PASS
 544         echo "++++ Number of failed tests:   "$RES_FAIL
 545         echo ""
 546         echo "++++ Number of failed configs: "$RES_CONF_FAIL
 547         echo ""
 548         echo "++++ Number of test case deviations: "$RES_DEVIATION
 549         echo ""
 550         echo "-------------------------------------     Test case complete    ---------------------------------"
 551         echo "-------------------------------------------------------------------------------------------------"
 552         echo ""
 553 }
 554
 555 #####################################################################
 556 ###### Functions for start, configuring, stoping, cleaning etc ######
 557 #####################################################################
 558
 559 # Start timer for time measurement
 560 # args - (any args will be printed though)
 561 start_timer() {
 562         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
 563         TC_TIMER=$SECONDS
 564         echo " Timer started"
 565 }
 566
 567 # Print the value of the time (in seconds)
 568 # args - <timer message to print>  -  timer value and message will be printed both on screen
 569 #                                     and in the timer measurement report
 570 print_timer() {
 571         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
 572         if [ $# -lt 1 ]; then
 573                 ((RES_CONF_FAIL++))
 574         __print_err "need 1 or more args,  <timer message to print>" $@
 575                 exit 1
 576         fi
 577         duration=$(($SECONDS-$TC_TIMER))
 578         if [ $duration -eq 0 ]; then
 579                 duration="<1 second"
 580         else
 581                 duration=$duration" seconds"
 582         fi
 583         echo " Timer duration :" $duration
 584
 585         echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
 586 }
 587
 588 # Print the value of the time (in seconds) and reset the timer
 589 # args - <timer message to print>  -  timer value and message will be printed both on screen
 590 #                                     and in the timer measurement report
 591 print_and_reset_timer() {
 592         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
 593         if [ $# -lt 1 ]; then
 594                 ((RES_CONF_FAIL++))
 595         __print_err "need 1 or more args,  <timer message to print>" $@
 596                 exit 1
 597         fi
 598         duration=$(($SECONDS-$TC_TIMER))" seconds"
 599         if [ $duration -eq 0 ]; then
 600                 duration="<1 second"
 601         else
 602                 duration=$duration" seconds"
 603         fi
 604         echo " Timer duration :" $duration
 605         TC_TIMER=$SECONDS
 606         echo " Timer reset"
 607
 608         echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
 609
 610 }
 611 # Print info about a deviations from intended tests
 612 # Each deviation counted is also printed in the testreport
 613 # args <deviation message to print>
 614 deviation() {
 615         echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
 616         if [ $# -lt 1 ]; then
 617                 ((RES_CONF_FAIL++))
 618                 __print_err "need 1 or more args,  <deviation message to print>" $@
 619                 exit 1
 620         fi
 621         ((RES_DEVIATION++))
 622         echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
 623         echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
 624         echo ""
 625 }
 626
 627 # Stop and remove all containers
 628 # args: -
 629 # (Function for test scripts)
 630 clean_containers() {
 631
 632         echo -e $BOLD"Stopping and removing all running containers, by container name"$EBOLD
 633
 634         CONTAINTER_NAMES=("Policy Agent           " $POLICY_AGENT_APP_NAME\
 635                                           "Non-RT RIC Simulator(s)" $RIC_SIM_PREFIX\
 636                                           "Message Router         " $MR_APP_NAME\
 637                                           "Callback Receiver      " $CR_APP_NAME\
 638                                           "Control Panel          " $CONTROL_PANEL_APP_NAME\
 639                                           "SDNC A1 Controller     " $SDNC_APP_NAME\
 640                                           "SDNC DB                " $SDNC_DB_APP_NAME\
 641                                           "SDNC ONAP A1 Adapter   " $SDNC_ONAP_APP_NAME\
 642                                           "SDNC DB                " $SDNC_ONAP_DB_APP_NAME\
 643                                           "CBS                    " $CBS_APP_NAME\
 644                                           "Consul                 " $CONSUL_APP_NAME)
 645
 646         nw=0 # Calc max width of container name, to make a nice table
 647         for (( i=1; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
 648                 if [ ${#CONTAINTER_NAMES[i]} -gt $nw ]; then
 649                         nw=${#CONTAINTER_NAMES[i]}
 650                 fi
 651         done
 652
 653         for (( i=0; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
 654                 APP="${CONTAINTER_NAMES[i]}"
 655                 CONTR="${CONTAINTER_NAMES[i+1]}"
 656                 for((w=${#CONTR}; w<$nw; w=w+1)); do
 657                         CONTR="$CONTR "
 658                 done
 659                 echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
 660                 docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
 661                 echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
 662                 docker rm $(docker ps -qa --filter name=${CONTR}) &> /dev/null
 663                 echo -e  " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
 664         done
 665
 666         echo ""
 667 }
 668
 669 # Function stop and remove all container in the end of the test script, if the arg 'auto-clean' is given at test script start
 670 # args: -
 671 # (Function for test scripts)
 672 auto_clean_containers() {
 673         echo
 674         if [ "$AUTO_CLEAN" == "auto" ]; then
 675                 echo -e $BOLD"Initiating automatic cleaning of started containers"$EBOLD
 676                 clean_containers
 677         fi
 678 }
 679
 680 # Function to sleep a test case for a numner of seconds. Prints the optional text args as info
 681 # args: <sleep-time-in-sec> [any-text-in-quoteds-to-printed]
 682 # (Function for test scripts)
 683 sleep_wait() {
 684
 685         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
 686         if [ $# -lt 1 ]; then
 687                 ((RES_CONF_FAIL++))
 688                 __print_err "need at least one arg, <sleep-time-in-sec> [any-text-to-printed]" $@
 689                 exit 1
 690         fi
 691         #echo "---- Sleep for " $1 " seconds ---- "$2
 692         start=$SECONDS
 693         duration=$((SECONDS-start))
 694         while [ $duration -lt $1 ]; do
 695                 echo -ne "  Slept for ${duration} seconds${SAMELINE}"
 696                 sleep 1
 697                 duration=$((SECONDS-start))
 698         done
 699         echo -ne "  Slept for ${duration} seconds${SAMELINE}"
 700         echo ""
 701 }
 702
 703 # Print error info for the call in the parent script (test case). Arg: <error-message-to-print>
 704 # Not to be called from the test script itself.
 705 __print_err() {
 706     echo -e $RED ${FUNCNAME[1]} " "$1" " ${BASH_SOURCE[2]} " line" ${BASH_LINENO[1]} $ERED
 707         if [ $# -gt 1 ]; then
 708                 echo -e $RED" Got: "${FUNCNAME[1]} ${@:2} $ERED
 709         fi
 710 }
 711
 712
 713 # Helper function to get a the port of a specific ric simulatpor
 714 # args: <ric-id>
 715 # (Not for test scripts)
 716 __find_sim_port() {
 717     name=$1" " #Space appended to prevent matching 10 if 1 is desired....
 718     cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
 719         cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | cut -f 3 -d ',' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
 720
 721         res=$(eval $cmdstr)
 722         if [[ "$res" =~ ^[0-9]+$ ]]; then
 723                 echo $res
 724         else
 725                 echo "0"
 726     fi
 727 }
 728
 729 # Function to create the docker network for the test
 730 # Not to be called from the test script itself.
 731 __create_docker_network() {
 732         tmp=$(docker network ls --format={{.Name}} --filter name=$DOCKER_SIM_NWNAME)
 733         if [ $? -ne 0 ]; then
 734                 echo -e $RED" Could not check if docker network $DOCKER_SIM_NWNAME exists"$ERED
 735                 return 1
 736         fi
 737         if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
 738                 echo -e "Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
 739                 docker network create $DOCKER_SIM_NWNAME
 740                 if [ $? -ne 0 ]; then
 741                         echo -e $RED" Could not create docker network $DOCKER_SIM_NWNAME"$ERED
 742                         return 1
 743                 fi
 744         else
 745                 echo -e " Docker network $DOCKER_SIM_NWNAME already exists$GREEN OK $EGREEN"
 746         fi
 747 }
 748
 749 # Check if container is started by calling url on localhost using a port, expects response code 2XX
 750 # args: <container-name> <port> <url> https|https
 751 # Not to be called from the test script itself.
 752 __check_container_start() {
 753         paramError=0
 754         if [ $# -ne 4 ]; then
 755                 paramError=1
 756         elif [ $4 != "http" ] && [ $4 != "https" ]; then
 757                 paramError=1
 758         fi
 759         if [ $paramError -ne 0 ]; then
 760                 ((RES_CONF_FAIL++))
 761                 __print_err "need 3 args, <container-name> <port> <url> https|https" $@
 762                 return 1
 763         fi
 764         echo -ne " Container $BOLD$1$EBOLD starting${SAMELINE}"
 765         appname=$1
 766         localport=$2
 767         url=$3
 768         if [[ $appname != "STANDALONE_"* ]]     ; then
 769                 app_started=0
 770                 for i in {1..10}; do
 771                         if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
 772                                         echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
 773                                         app_started=1
 774                                         break
 775                                 else
 776                                         sleep $i
 777                         fi
 778                 done
 779                 if [ $app_started -eq 0 ]; then
 780                         ((RES_CONF_FAIL++))
 781                         echo ""
 782                         echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
 783                         return 1
 784                 fi
 785                 if [ $localport -eq 0 ]; then
 786                         while [ $localport -eq 0 ]; do
 787                                 echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
 788                                 localport=$(__find_sim_port $appname)
 789                                 sleep 1
 790                                 echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
 791                         done
 792                         echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
 793                         echo ""
 794                 fi
 795         fi
 796
 797         pa_st=false
 798         echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
 799         for i in {1..20}; do
 800                 if [ $4 == "https" ]; then
 801                         result="$(__do_curl "-k https://localhost:"${localport}${url})"
 802                 else
 803                         result="$(__do_curl $LOCALHOST${localport}${url})"
 804                 fi
 805                 if [ $? -eq 0 ]; then
 806                         if [ ${#result} -gt 15 ]; then
 807                                 #If response is too long, truncate
 808                                 result="...response text too long, omitted"
 809                         fi
 810                         echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
 811                         echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN"
 812                         pa_st=true
 813                         break
 814                 else
 815                         #echo " Retrying in $i seconds"
 816                         echo -ne " Waiting for container ${appname} service status...retrying in $i seconds${SAMELINE}"
 817                         sleep $i
 818                 fi
 819         done
 820
 821         if [ "$pa_st" = "false"  ]; then
 822                 ((RES_CONF_FAIL++))
 823                 echo -e $RED" Container ${appname} did not respond to service status"$ERED
 824                 return 0
 825         fi
 826
 827         echo ""
 828         return 0
 829 }
 830
 831
 832 # Function to start a container and wait until it responds on the given port and url.
 833 #args: <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> [<app-name> <port-number> <alive-url>]*
 834 __start_container() {
 835
 836         variableArgCount=$(($#-2))
 837         if [ $# -lt 6 ] && [ [ $(($variableArgCount%4)) -ne 0 ]; then
 838                 ((RES_CONF_FAIL++))
 839         __print_err "need 6 or more args,  <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> http|https [<app-name> <port-number> <alive-url> http|https ]*" $@
 840                 exit 1
 841         fi
 842
 843         __create_docker_network
 844
 845         curdir=$PWD
 846         cd $SIM_GROUP
 847         cd $1
 848
 849         if [ "$2" == "NODOCKERARGS" ]; then
 850                 docker-compose up -d &> .dockererr
 851                 if [ $? -ne 0 ]; then
 852                         echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
 853                         cat .dockererr
 854                 fi
 855         elif [ "$2" == "STANDALONE" ]; then
 856                 echo "Skipping docker-compose"
 857         else
 858                 docker-compose up -d $2 &> .dockererr
 859                 if [ $? -ne 0 ]; then
 860                         echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
 861                         cat .dockererr
 862                 fi
 863         fi
 864         app_prefix=""
 865         if [ "$2" == "STANDALONE" ]; then
 866                 app_prefix="STANDALONE_"
 867         fi
 868         shift; shift;
 869         cntr=0
 870         while [ $cntr -lt $variableArgCount ]; do
 871                 app=$app_prefix$1; shift;
 872                 port=$1; shift;
 873                 url=$1; shift;
 874                 httpx=$1; shift;
 875                 let cntr=cntr+4
 876
 877                 __check_container_start "$app" "$port" "$url" $httpx
 878         done
 879
 880         cd $curdir
 881         echo ""
 882         return 0
 883 }
 884
 885 ####################
 886 ### Consul functions
 887 ####################
 888
 889 # Function to load config from a file into consul for the Policy Agent
 890 # arg: <json-config-file>
 891 # (Function for test scripts)
 892 consul_config_app() {
 893
 894         echo -e $BOLD"Configuring Consul"$EBOLD
 895
 896         if [ $# -ne 1 ]; then
 897                 ((RES_CONF_FAIL++))
 898         __print_err "need one arg,  <json-config-file>" $@
 899                 exit 1
 900         fi
 901
 902         echo " Loading config for "$POLICY_AGENT_APP_NAME" from "$1
 903
 904         curl -s $LOCALHOST${CONSUL_EXTERNAL_PORT}/v1/kv/${POLICY_AGENT_APP_NAME}?dc=dc1 -X PUT -H 'Accept: application/json' -H 'Content-Type: application/json' -H 'X-Requested-With: XMLHttpRequest' --data-binary "@"$1 >/dev/null
 905         if [ $? -ne 0 ]; then
 906                 echo -e $RED" FAIL - json config could not be loaded to consul" $ERED
 907                 ((RES_CONF_FAIL++))
 908                 return 1
 909         fi
 910         body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
 911         echo $body > ".output"$1
 912
 913         if [ $? -ne 0 ]; then
 914                 echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
 915                 ((RES_CONF_FAIL++))
 916                 return 1
 917         else
 918                 targetJson=$(< $1)
 919                 targetJson="{\"config\":"$targetJson"}"
 920                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 921                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 922                 if [ $res -ne 0 ]; then
 923                         echo -e $RED" FAIL - policy json config read from consul/cbs is not equal to the intended json config...." $ERED
 924                         ((RES_CONF_FAIL++))
 925                         return 1
 926                 else
 927                         echo -e $GREEN" Config loaded ok to consul"$EGREEN
 928                 fi
 929         fi
 930
 931         echo ""
 932
 933 }
 934
 935 # Function to perpare the consul configuration according to the current simulator configuration
 936 # args: SDNC|SDNC_ONAP|NOSDNC <output-file>
 937 # (Function for test scripts)
 938 prepare_consul_config() {
 939         echo -e $BOLD"Prepare Consul config"$EBOLD
 940
 941         echo " Writing consul config for "$POLICY_AGENT_APP_NAME" to file: "$2
 942
 943         if [ $# != 2 ];  then
 944                 ((RES_CONF_FAIL++))
 945         __print_err "need two args,  SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
 946                 exit 1
 947         fi
 948
 949         if [ $1 == "SDNC" ]; then
 950                 echo -e " Config$BOLD including SDNC$EBOLD configuration"
 951         elif [ $1 == "SDNC_ONAP" ]; then
 952                 echo -e " Config$BOLD including SDNC ONAP$EBOLD configuration"
 953         elif [ $1 == "NOSDNC" ];  then
 954                 echo -e " Config$BOLD excluding SDNC or SDNC ONAP$EBOLD configuration"
 955         else
 956                 ((RES_CONF_FAIL++))
 957         __print_err "need two args,  SDNC|SDNC_ONAP|NOSDNC <output-file>" $@
 958                 exit 1
 959         fi
 960
 961         config_json="\n            {"
 962         if [ $1 == "SDNC" ]; then
 963                 config_json=$config_json"\n   \"controller\": ["
 964                 config_json=$config_json"\n                     {"
 965                 config_json=$config_json"\n                       \"name\": \"$SDNC_APP_NAME\","
 966                 if [ $AGENT_STAND_ALONE -eq 0 ]; then
 967                         config_json=$config_json"\n                       \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
 968                 else
 969                         config_json=$config_json"\n                       \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
 970                 fi
 971                 config_json=$config_json"\n                       \"userName\": \"$SDNC_USER\","
 972                 config_json=$config_json"\n                       \"password\": \"$SDNC_PWD\""
 973                 config_json=$config_json"\n                     }"
 974                 config_json=$config_json"\n   ],"
 975         fi
 976         if [ $1 == "SDNC_ONAP" ]; then
 977                 config_json=$config_json"\n   \"controller\": ["
 978                 config_json=$config_json"\n                     {"
 979                 config_json=$config_json"\n                       \"name\": \"$SDNC_ONAP_APP_NAME\","
 980                 if [ $AGENT_STAND_ALONE -eq 0 ]; then
 981                         config_json=$config_json"\n                       \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
 982                 else
 983                         config_json=$config_json"\n                       \"baseUrl\": \"http://localhost:$SDNC_ONAP_EXTERNAL_PORT\","
 984                 fi
 985                 config_json=$config_json"\n                       \"userName\": \"$SDNC_ONAP_USER\","
 986                 config_json=$config_json"\n                       \"password\": \"$SDNC_ONAP_PWD\""
 987                 config_json=$config_json"\n                     }"
 988                 config_json=$config_json"\n   ],"
 989         fi
 990
 991
 992         config_json=$config_json"\n   \"streams_publishes\": {"
 993         config_json=$config_json"\n                            \"dmaap_publisher\": {"
 994         config_json=$config_json"\n                              \"type\": \"$MR_APP_NAME\","
 995         config_json=$config_json"\n                              \"dmaap_info\": {"
 996         if [ $AGENT_STAND_ALONE -eq 0 ]; then
 997                 config_json=$config_json"\n                                \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
 998         else
 999                 config_json=$config_json"\n                                \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
1000         fi
1001         config_json=$config_json"\n                              }"
1002         config_json=$config_json"\n                            }"
1003         config_json=$config_json"\n   },"
1004         config_json=$config_json"\n   \"streams_subscribes\": {"
1005         config_json=$config_json"\n                             \"dmaap_subscriber\": {"
1006         config_json=$config_json"\n                               \"type\": \"$MR_APP_NAME\","
1007         config_json=$config_json"\n                               \"dmaap_info\": {"
1008         if [ $AGENT_STAND_ALONE -eq 0 ]; then
1009                 config_json=$config_json"\n                                   \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
1010         else
1011                 config_json=$config_json"\n                                   \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
1012         fi
1013         config_json=$config_json"\n                                 }"
1014         config_json=$config_json"\n                               }"
1015         config_json=$config_json"\n   },"
1016
1017         config_json=$config_json"\n   \"ric\": ["
1018
1019         rics=$(docker ps | grep ricsim | awk '{print $NF}')
1020
1021         if [ $? -ne 0 ] || [ -z "$rics" ]; then
1022                 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
1023                 ((RES_CONF_FAIL++))
1024                 return 1
1025         fi
1026
1027         cntr=0
1028         for ric in $rics; do
1029                 if [ $cntr -gt 0 ]; then
1030                         config_json=$config_json"\n          ,"
1031                 fi
1032                 config_json=$config_json"\n          {"
1033                 config_json=$config_json"\n            \"name\": \"$ric\","
1034                 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1035                         config_json=$config_json"\n            \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
1036                 else
1037                         config_json=$config_json"\n            \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
1038                 fi
1039                 if [ $1 == "SDNC" ]; then
1040                         config_json=$config_json"\n            \"controller\": \"$SDNC_APP_NAME\","
1041                 elif [ $1 == "SDNC_ONAP" ]; then
1042                         config_json=$config_json"\n            \"controller\": \"$SDNC_ONAP_APP_NAME\","
1043                 fi
1044                 config_json=$config_json"\n            \"managedElementIds\": ["
1045                 config_json=$config_json"\n              \"me1_$ric\","
1046                 config_json=$config_json"\n              \"me2_$ric\""
1047                 config_json=$config_json"\n            ]"
1048                 config_json=$config_json"\n          }"
1049                 let cntr=cntr+1
1050         done
1051
1052         config_json=$config_json"\n           ]"
1053         config_json=$config_json"\n}"
1054
1055
1056         printf "$config_json">$2
1057
1058         echo ""
1059 }
1060
1061
1062 # Start Consul and CBS
1063 # args: -
1064 # (Function for test scripts)
1065 start_consul_cbs() {
1066
1067         echo -e $BOLD"Starting Consul and CBS"$EBOLD
1068
1069         __start_container consul_cbs NODOCKERARGS  "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" "http" \
1070                                                      "$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck" "http"
1071 }
1072
1073 ###########################
1074 ### RIC Simulator functions
1075 ###########################
1076
1077 use_simulator_http() {
1078         echo -e "Using unsecure $BOLD http $EBOLD towards the simulators"
1079         export RIC_SIM_HTTPX="http"
1080         export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1081         export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
1082         export RIC_SIM_CERT_MOUNT_DIR="./fakedir"  #Fake dir so that the sim container does not find any cert
1083         echo ""
1084 }
1085
1086 use_simulator_https() {
1087         echo -e "Using secure $BOLD https $EBOLD towards the simulators"
1088         export RIC_SIM_HTTPX="https"
1089         export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1090         export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
1091         export RIC_SIM_CERT_MOUNT_DIR="./cert"
1092         echo ""
1093 }
1094
1095 # Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
1096 # args:  ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
1097 # (Function for test scripts)
1098 start_ric_simulators() {
1099
1100         echo -e $BOLD"Starting RIC Simulators"$EBOLD
1101
1102         if [ $# != 3 ]; then
1103                 ((RES_CONF_FAIL++))
1104         __print_err "need three args,  ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>" $@
1105                 exit 1
1106         fi
1107         echo " $2 simulators using basename: $1 on interface: $3"
1108         #Set env var for simulator count and A1 interface vesion for the given group
1109         if [ $1 == "ricsim_g1" ]; then
1110                 G1_COUNT=$2
1111                 G1_A1_VERSION=$3
1112         elif [ $1 == "ricsim_g2" ]; then
1113                 G2_COUNT=$2
1114                 G2_A1_VERSION=$3
1115         elif [ $1 == "ricsim_g3" ]; then
1116                 G3_COUNT=$2
1117                 G3_A1_VERSION=$3
1118         else
1119                 ((RES_CONF_FAIL++))
1120         __print_err "need three args, gricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>" $@
1121                 exit 1
1122         fi
1123
1124         # Create .env file to compose project, all ric container will get this prefix
1125         echo "COMPOSE_PROJECT_NAME="$RIC_SIM_PREFIX > $SIM_GROUP/ric/.env
1126
1127         export G1_A1_VERSION
1128         export G2_A1_VERSION
1129         export G3_A1_VERSION
1130
1131         docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT"
1132         app_data=""
1133         cntr=1
1134         while [ $cntr -le $2 ]; do
1135                 app=$1"_"$cntr
1136                 port=0
1137                 app_data="$app_data $app $port / "$RIC_SIM_HTTPX
1138                 let cntr=cntr+1
1139         done
1140         __start_container ric "$docker_args" $app_data
1141
1142 }
1143
1144 ###########################
1145 ### Control Panel functions
1146 ###########################
1147
1148 # Start the Control Panel container
1149 # args: -
1150 # (Function for test scripts)
1151 start_control_panel() {
1152
1153         echo -e $BOLD"Starting Control Panel"$EBOLD
1154
1155         __start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/" "http"
1156
1157 }
1158
1159 ##################
1160 ### SDNC functions
1161 ##################
1162
1163 # Start the SDNC A1 Controller
1164 # args: -
1165 # (Function for test scripts)
1166 start_sdnc() {
1167
1168         echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
1169
1170         __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
1171
1172 }
1173
1174 use_sdnc_http() {
1175         echo -e $BOLD"Using http between agent and SDNC"$EBOLD
1176         export SDNC_HTTPX="http"
1177         export SDNC_PORT=$SDNC_INTERNAL_PORT
1178         export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
1179         echo ""
1180 }
1181
1182 use_sdnc_https() {
1183         echo -e $BOLD"Using https between agent and SDNC"$EBOLD
1184         export SDNC_HTTPX="https"
1185         export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
1186         export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
1187         echo ""
1188 }
1189
1190 #######################
1191 ### SDNC ONAP functions
1192 #######################
1193
1194 # Start the SDNC ONAP A1 Adapter
1195 # args: -
1196 # (Function for test scripts)
1197 start_sdnc_onap() {
1198
1199         echo -e $BOLD"Starting SDNC ONAP A1 Adapter"$EBOLD
1200
1201         __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT $SDNC_ONAP_ALIVE_URL "http"
1202
1203 }
1204
1205 # Configure the SDNC ONAP A1 Adapter
1206 # args: -
1207 # (Function for test scripts)
1208 config_sdnc_onap() {
1209
1210         echo -e $BOLD"Configuring SDNC ONAP A1 Adapter"$EBOLD
1211
1212         LOCALFILE=".sdnc_onap.prop"
1213         REMOTEFILE="/tmp/.sdnc_onap.prop"
1214
1215         docker cp $SDNC_ONAP_APP_NAME:$SDNC_ONAP_PROPERTIES_FILE $LOCALFILE
1216         if [ $? -ne 0 ]; then
1217                 echo -e $RED"Could not copy $SDNC_ONAP_PROPERTIES_FILE from $SDNC_ONAP_APP_NAME container"$ERED
1218                 exit 1
1219         fi
1220
1221
1222         #Config of the prop file shall be inserted here
1223
1224         #Copy file to /tmp and then to final destination, a trick to get correct permission of the file.
1225
1226         docker cp $LOCALFILE $SDNC_ONAP_APP_NAME:$REMOTEFILE
1227         if [ $? -ne 0 ]; then
1228                 echo -e $RED"Could not copy local $LOCALFILE to $REMOTEFILE in $SDNC_ONAP_APP_NAME container"$ERED
1229                 exit 1
1230         fi
1231
1232         docker exec -it $SDNC_ONAP_APP_NAME cp $REMOTEFILE $SDNC_ONAP_PROPERTIES_FILE
1233         if [ $? -ne 0 ]; then
1234                 echo -e $RED"Could not copy $REMOTEFILE to $SDNC_ONAP_PROPERTIES_FILE in $SDNC_ONAP_APP_NAME container"$ERED
1235                 exit 1
1236         fi
1237 }
1238
1239 #####################
1240 ### MR stub functions
1241 #####################
1242
1243 # Start the Message Router stub interface in the simulator group
1244 # args: -
1245 # (Function for test scripts)
1246 start_mr() {
1247
1248         echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
1249         export MR_CERT_MOUNT_DIR="./cert"
1250         __start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
1251 }
1252
1253 use_mr_http() {
1254         echo -e $BOLD"Using http between agent and MR"$EBOLD
1255         export MR_HTTPX="http"
1256         export MR_PORT=$MR_INTERNAL_PORT
1257         export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
1258         echo ""
1259 }
1260
1261 use_mr_https() {
1262         echo -e $BOLD"Using https between agent and MR"$EBOLD
1263         export MR_HTTPX="https"
1264         export MR_PORT=$MR_INTERNAL_SECURE_PORT
1265         export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
1266         echo ""
1267 }
1268
1269
1270 ################
1271 ### CR functions
1272 ################
1273
1274 # Start the Callback reciver in the simulator group
1275 # args: -
1276 # (Function for test scripts)
1277 start_cr() {
1278
1279         echo -e $BOLD"Starting Callback Receiver"$EBOLD
1280
1281         __start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/" "http"
1282
1283 }
1284
1285 ###########################
1286 ### Policy Agents functions
1287 ###########################
1288
1289 # Use an agent on the local machine instead of container
1290 use_agent_stand_alone() {
1291         AGENT_STAND_ALONE=1
1292 }
1293
1294 # Start the policy agent
1295 # args: -
1296 # (Function for test scripts)
1297 start_policy_agent() {
1298
1299         echo -e $BOLD"Starting Policy Agent"$EBOLD
1300
1301         if [ $AGENT_STAND_ALONE -eq 0 ]; then
1302                 __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1303         else
1304                 echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
1305                 echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
1306                 echo -e $RED"application.yaml"$ERED
1307                 echo -e $RED"The application jar may need to be built beforefor continuing"$ERED
1308                 echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
1309
1310                 read -p "<press any key to continue>"
1311                 __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1312         fi
1313
1314 }
1315
1316 # All calls to the agent will be directed to the agent REST interface from now on
1317 # args: -
1318 # (Function for test scripts)
1319 use_agent_rest_http() {
1320         echo -e $BOLD"Using agent REST interface with http"$EBOLD
1321         export ADAPTER=$RESTBASE
1322         echo ""
1323 }
1324
1325 # All calls to the agent will be directed to the agent REST interface from now on
1326 # args: -
1327 # (Function for test scripts)
1328 use_agent_rest_https() {
1329         echo -e $BOLD"Using agent REST interface with https"$EBOLD
1330         export ADAPTER=$RESTBASE_SECURE
1331         echo ""
1332         return 0
1333 }
1334
1335 # All calls to the agent will be directed to the agent dmaap interface from now on
1336 # args: -
1337 # (Function for test scripts)
1338 use_agent_dmaap() {
1339         echo -e $BOLD"Agent using DMAAP interface"$EBOLD
1340         export ADAPTER=$DMAAPBASE
1341         echo ""
1342         return 0
1343 }
1344
1345
1346 # Turn on debug level tracing in the agent
1347 # args: -
1348 # (Function for test scripts)
1349 set_agent_debug() {
1350         echo -e $BOLD"Setting agent debug"$EBOLD
1351         curl $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST  -H 'Content-Type: application/json' -d '{"configuredLevel":"debug"}' &> /dev/null
1352         if [ $? -ne 0 ]; then
1353                 __print_err "could not set debug mode" $@
1354                 return 1
1355         fi
1356         echo ""
1357         return 0
1358 }
1359
1360 # Perform curl retries when making direct call to the agent for the specified http response codes
1361 # Speace separated list of http response codes
1362 # args: [<response-code>]*
1363 use_agent_retries() {
1364         echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
1365         AGENT_RETRY_CODES=$@
1366         echo ""
1367         return
1368 }
1369
1370 #################
1371 ### Log functions
1372 #################
1373
1374 # Check the agent logs for WARNINGs and ERRORs
1375 # args: -
1376 # (Function for test scripts)
1377
1378 check_policy_agent_logs() {
1379         __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH
1380 }
1381
1382 check_control_panel_logs() {
1383         __check_container_logs "Control Panel" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_LOGPATH
1384 }
1385
1386 __check_container_logs() {
1387         dispname=$1
1388         appname=$2
1389         logpath=$3
1390         echo -e $BOLD"Checking $dispname container $appname log ($logpath) for WARNINGs and ERRORs"$EBOLD
1391
1392         #tmp=$(docker ps | grep $appname)
1393         tmp=$(docker ps -q --filter name=$appname) #get the container id
1394         if [ -z "$tmp" ]; then  #Only check logs for running Policy Agent apps
1395                 echo $dispname" is not running, no check made"
1396                 return
1397         fi
1398         foundentries="$(docker exec -it $tmp grep WARN $logpath | wc -l)"
1399         if [ $? -ne  0 ];then
1400                 echo "  Problem to search $appname log $logpath"
1401         else
1402                 if [ $foundentries -eq 0 ]; then
1403                         echo "  No WARN entries found in $appname log $logpath"
1404                 else
1405                         echo -e "  Found \033[1m"$foundentries"\033[0m WARN entries in $appname log $logpath"
1406                 fi
1407         fi
1408         foundentries="$(docker exec -it $tmp grep ERR $logpath | wc -l)"
1409         if [ $? -ne  0 ];then
1410                 echo "  Problem to search $appname log $logpath"
1411         else
1412                 if [ $foundentries -eq 0 ]; then
1413                         echo "  No ERR entries found in $appname log $logpath"
1414                 else
1415                         echo -e $RED"  Found \033[1m"$foundentries"\033[0m"$RED" ERR entries in $appname log $logpath"$ERED
1416                 fi
1417         fi
1418         echo ""
1419 }
1420
1421 # Store all container logs and other logs in the log dir for the script
1422 # Logs are stored with a prefix in case logs should be stored several times during a test
1423 # args: <logfile-prefix>
1424 # (Function for test scripts)
1425 store_logs() {
1426         if [ $# != 1 ]; then
1427                 ((RES_CONF_FAIL++))
1428         __print_err "need one arg, <file-prefix>" $@
1429                 exit 1
1430         fi
1431         echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1$EBOLD
1432
1433         docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
1434         docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
1435         docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
1436         docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_control-panel.log 2>&1
1437         docker logs $MR_APP_NAME > $TESTLOGS/$ATC/$1_mr.log 2>&1
1438         docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
1439         cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
1440
1441         docker exec -it $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
1442
1443         docker exec -it $SDNC_ONAP_APP_NAME cat $SDNC_ONAP_KARAF_LOG > $TESTLOGS/$ATC/$1_SDNC_ONAP_karaf.log 2>&1
1444
1445         rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
1446         for ric in $rics; do
1447                 docker logs $ric > $TESTLOGS/$ATC/$1_$ric.log 2>&1
1448         done
1449         body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
1450         echo "$body" > $TESTLOGS/$ATC/$1_consul_config.json 2>&1
1451         echo ""
1452 }
1453
1454 ###############
1455 ## Generic curl
1456 ###############
1457 # Generic curl function, assumed all 200-codes are ok
1458 # args: <url>
1459 # returns: <returned response (without respose code)>  or "<no-response-from-server>" or "<not found, <http-code>>""
1460 # returns: The return code is 0 for ok and 1 for not ok
1461 __do_curl() {
1462         echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
1463         curlString="curl -skw %{http_code} $1"
1464         echo " CMD: $curlString" >> $HTTPLOG
1465         res=$($curlString)
1466         echo " RESP: $res" >> $HTTPLOG
1467         http_code="${res:${#res}-3}"
1468         if [ ${#res} -eq 3 ]; then
1469                 echo "<no-response-from-server>"
1470                 return 1
1471         else
1472                 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
1473                         echo "<not found, resp:${http_code}>"
1474                         return 1
1475                 fi
1476                 if [ $# -eq 2 ]; then
1477                         echo "${res:0:${#res}-3}" | xargs
1478                 else
1479                         echo "${res:0:${#res}-3}"
1480                 fi
1481
1482                 return 0
1483         fi
1484 }
1485
1486 #######################################
1487 ### Basic helper function for test cases
1488 #######################################
1489
1490 # Test a simulator container variable value towards target value using an condition operator with an optional timeout.
1491 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value>  - This test is done
1492 # immediately and sets pass or fail depending on the result of comparing variable and target using the operator.
1493 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> <timeout>  - This test waits up to the timeout
1494 # before setting pass or fail depending on the result of comparing variable and target using the operator.
1495 # If the <variable-name> has the 'json:' prefix, the the variable will be used as url and the <target-value> will be compared towards the length of the json array in the response.
1496 # Not to be called from test script.
1497
1498 __var_test() {
1499         checkjsonarraycount=0
1500
1501         if [ $# -eq 6 ]; then
1502                 if [[ $3 == "json:"* ]]; then
1503                         checkjsonarraycount=1
1504                 fi
1505
1506                 #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} within ${6} seconds ----"
1507                 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
1508                 ((RES_TEST++))
1509                 start=$SECONDS
1510                 ctr=0
1511                 for (( ; ; )); do
1512                         if [ $checkjsonarraycount -eq 0 ]; then
1513                                 result="$(__do_curl $2$3)"
1514                                 retcode=$?
1515                                 result=${result//[[:blank:]]/} #Strip blanks
1516                         else
1517                                 path=${3:5}
1518                                 result="$(__do_curl $2$path)"
1519                                 retcode=$?
1520                                 echo "$result" > .tmp.curl.json
1521                                 result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
1522                         fi
1523                         duration=$((SECONDS-start))
1524                         echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
1525                         let ctr=ctr+1
1526                         if [ $retcode -ne 0 ]; then
1527                                 if [ $duration -gt $6 ]; then
1528                                         ((RES_FAIL++))
1529                                         #echo -e "----  \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5}  not reached in ${6} seconds, result = ${result} ----"
1530                                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
1531                                         return
1532                                 fi
1533                         elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
1534                                 ((RES_PASS++))
1535                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
1536                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
1537                                 #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds ----"
1538                                 return
1539                         elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
1540                                 ((RES_PASS++))
1541                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
1542                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
1543                                 #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result}  ----"
1544                                 return
1545                         elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
1546                                 ((RES_PASS++))
1547                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
1548                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
1549                                 #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result}  ----"
1550                                 return
1551                         elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
1552                                 ((RES_PASS++))
1553                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
1554                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
1555                                 #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met in ${duration} seconds, result = ${result}  ----"
1556                                 return
1557                         else
1558                                 if [ $duration -gt $6 ]; then
1559                                         ((RES_FAIL++))
1560                                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
1561                                         #echo -e "----  \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5}  not reached in ${6} seconds, result = ${result} ----"
1562                                         return
1563                                 fi
1564                         fi
1565                         sleep 1
1566                 done
1567         elif [ $# -eq 5 ]; then
1568                 if [[ $3 == "json:"* ]]; then
1569                         checkjsonarraycount=1
1570                 fi
1571
1572                 #echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} ----"
1573                 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
1574                 ((RES_TEST++))
1575                 if [ $checkjsonarraycount -eq 0 ]; then
1576                         result="$(__do_curl $2$3)"
1577                         retcode=$?
1578                         result=${result//[[:blank:]]/} #Strip blanks
1579                 else
1580                         path=${3:5}
1581                         result="$(__do_curl $2$path)"
1582                         retcode=$?
1583                         echo "$result" > .tmp.curl.json
1584                         result=$(python3 ../common/count_json_elements.py ".tmp.curl.json")
1585                 fi
1586                 if [ $retcode -ne 0 ]; then
1587                         ((RES_FAIL++))
1588                         #echo -e "----  \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
1589                         echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
1590                 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
1591                         ((RES_PASS++))
1592                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
1593                         #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met"
1594                 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
1595                         ((RES_PASS++))
1596                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
1597                         #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
1598                 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
1599                         ((RES_PASS++))
1600                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
1601                         #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
1602                 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
1603                         ((RES_PASS++))
1604                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
1605                         #echo -e "----  \033[32m\033[1mPASS\033[0m - Test criteria met, result = ${result} ----"
1606                 else
1607                         ((RES_FAIL++))
1608                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
1609                         #echo -e "----  \033[31m\033[1mFAIL\033[0m - Target ${3} ${4} ${5} not reached, result = ${result} ----"
1610                 fi
1611         else
1612                 echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
1613                 echo "Got:" $@
1614                 exit 1
1615         fi
1616 }
1617
1618
1619 ### Generic test cases for varaible checking
1620
1621 # Tests if a variable value in the CR is equal to a target value and and optional timeout.
1622 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
1623 # equal to the target or not.
1624 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
1625 # before setting pass or fail depending on if the variable value becomes equal to the target
1626 # value or not.
1627 # (Function for test scripts)
1628 cr_equal() {
1629         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
1630                 __var_test "CR" "$LOCALHOST$CR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
1631         else
1632                 ((RES_CONF_FAIL++))
1633                 __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
1634         fi
1635 }
1636
1637 # Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
1638 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
1639 # equal to the target or not.
1640 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
1641 # before setting pass or fail depending on if the variable value becomes equal to the target
1642 # value or not.
1643 # (Function for test scripts)
1644 mr_equal() {
1645         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
1646                 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
1647         else
1648                 ((RES_CONF_FAIL++))
1649                 __print_err "Wrong args to mr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
1650         fi
1651 }
1652
1653 # Tests if a variable value in the MR stub is greater than a target value and and optional timeout.
1654 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
1655 # greater than the target or not.
1656 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
1657 # before setting pass or fail depending on if the variable value becomes greater than the target
1658 # value or not.
1659 # (Function for test scripts)
1660 mr_greater() {
1661         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
1662                 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 ">" $2 $3
1663         else
1664                 ((RES_CONF_FAIL++))
1665                 __print_err "Wrong args to mr_greater, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
1666         fi
1667 }
1668
1669 # Read a variable value from MR sim and send to stdout. Arg: <variable-name>
1670 mr_read() {
1671         echo "$(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"
1672 }
1673
1674 # Print a variable value from the MR stub.
1675 # arg: <variable-name>
1676 # (Function for test scripts)
1677 mr_print() {
1678         if [ $# != 1 ]; then
1679                 ((RES_CONF_FAIL++))
1680         __print_err "need one arg, <mr-param>" $@
1681                 exit 1
1682         fi
1683         echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD
1684 }