3 # ============LICENSE_START===============================================
4 # Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 # ========================================================================
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
17 # ============LICENSE_END=================================================
20 # This is a script that contains all the functions needed for auto test
21 # Arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]
24 # Create a test case id, ATC (Auto Test Case), from the name of the test case script.
25 # FTC1.sh -> ATC == FTC1
26 ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
28 #Create result file (containing '1' for error) for this test case
29 #Will be replaced with a file containing '0' if all test cases pass
30 echo "1" > "$PWD/.result$ATC.txt"
32 #Formatting for 'echo' cmd
37 GREEN="\033[32m\033[1m"
39 YELLOW="\033[33m\033[1m"
44 if [ $? -ne 0 ] || [ -z tmp ]; then
45 echo -e $RED"python3 is required to run the test environment, pls install"$ERED
49 if [ $? -ne 0 ] || [ -z tmp ]; then
50 echo -e $RED"docker is required to run the test environment, pls install"$ERED
54 tmp=$(which docker-compose)
55 if [ $? -ne 0 ] || [ -z tmp ]; then
56 echo -e $RED"docker-compose is required to run the test environment, pls install"$ERED
60 # Just resetting any previous echo formatting...
63 # default test environment variables
64 TEST_ENV_VAR_FILE="../common/test_env.sh"
66 echo "Test case started as: ${BASH_SOURCE[$i+1]} "$@
69 LOCALHOST="http://localhost:"
71 # Make curl retries towards ECS for http response codes set in this env var, space separated list of codes
74 # Make curl retries towards the agent for http response codes set in this env var, space separated list of codes
77 # Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
80 # Var to hold 'auto' in case containers shall be stopped when test case ends
83 # Var to hold the app names to use local image for when running 'remote' or 'remote-remove'
86 # List of available apps to override with local image
87 AVAILABLE_LOCAL_IMAGES_OVERRIDE="PA ECS CP SDNC RICSIM"
89 # Use this var (STOP_AT_ERROR=1 in the test script) for debugging/trouble shooting to take all logs and exit at first FAIL test case
92 # Function to indent cmd output with one space
93 indent1() { sed 's/^/ /'; }
95 # Function to indent cmd output with two spaces
96 indent2() { sed 's/^/ /'; }
98 # Set a description string for the test case
99 if [ -z "$TC_ONELINE_DESCR" ]; then
100 TC_ONELINE_DESCR="<no-description>"
101 echo "No test case description found, TC_ONELINE_DESCR should be set on in the test script , using "$TC_ONELINE_DESCR
104 # Counter for test suites
105 if [ -f .tmp_tcsuite_ctr ]; then
106 tmpval=$(< .tmp_tcsuite_ctr)
108 echo $tmpval > .tmp_tcsuite_ctr
111 # Create the logs dir if not already created in the current dir
112 if [ ! -d "logs" ]; then
117 # Create the tmp dir for temporary files that is not needed after the test
118 # hidden files for the test env is still stored in the current dir
119 if [ ! -d "tmp" ]; then
123 # Create a http message log for this testcase
124 HTTPLOG=$PWD"/.httplog_"$ATC".txt"
128 # Create a log dir for the test case
129 mkdir -p $TESTLOGS/$ATC
131 # Clear the log dir for the test case
132 rm $TESTLOGS/$ATC/*.log &> /dev/null
133 rm $TESTLOGS/$ATC/*.txt &> /dev/null
134 rm $TESTLOGS/$ATC/*.json &> /dev/null
136 # Log all output from the test case to a TC log
137 TCLOG=$TESTLOGS/$ATC/TC.log
138 exec &> >(tee ${TCLOG})
140 #Variables for counting tests as well as passed and failed tests
147 #File to keep deviation messages
148 DEVIATION_FILE=".tmp_deviations"
149 rm $DEVIATION_FILE &> /dev/null
151 #Var for measuring execution time
152 TCTEST_START=$SECONDS
154 #File to save timer measurement results
155 TIMER_MEASUREMENTS=".timer_measurement.txt"
156 echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
159 echo "-------------------------------------------------------------------------------------------------"
160 echo "----------------------------------- Test case: "$ATC
161 echo "----------------------------------- Started: "$(date)
162 echo "-------------------------------------------------------------------------------------------------"
163 echo "-- Description: "$TC_ONELINE_DESCR
164 echo "-------------------------------------------------------------------------------------------------"
165 echo "----------------------------------- Test case setup -----------------------------------"
169 if [ $# -lt 1 ]; then
172 if [ $paramerror -eq 0 ]; then
173 if [ "$1" != "remote" ] && [ "$1" != "remote-remove" ] && [ "$1" != "local" ]; then
180 while [ $paramerror -eq 0 ] && [ $foundparm -eq 0 ]; do
182 if [ $paramerror -eq 0 ]; then
183 if [ "$1" == "auto-clean" ]; then
185 echo "Option set - Auto clean at end of test script"
190 if [ $paramerror -eq 0 ]; then
191 if [ "$1" == "--stop-at-error" ]; then
193 echo "Option set - Stop at first error"
198 if [ $paramerror -eq 0 ]; then
199 if [ "$1" == "--ricsim-prefix" ]; then
205 echo "Option set - Overriding RIC_SIM_PREFIX with: "$1
211 if [ $paramerror -eq 0 ]; then
212 if [ "$1" == "--env-file" ]; then
218 echo "Option set - Overriding test_env.sh with: "$1
224 if [ $paramerror -eq 0 ]; then
225 if [ "$1" == "--use-local-image" ]; then
228 while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
229 USE_LOCAL_IMAGES=$USE_LOCAL_IMAGES" "$1
230 if [[ "$AVAILABLE_LOCAL_IMAGES_OVERRIDE" != *"$1"* ]]; then
236 if [ -z "$USE_LOCAL_IMAGES" ]; then
239 echo "Option set - Override remote images for app(s):"$USE_LOCAL_IMAGES
247 if [ $paramerror -eq 0 ] && [ $# -gt 0 ]; then
251 if [ $paramerror -eq 1 ]; then
252 echo -e $RED"Expected arg: local|remote|remote-remove [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [ --env-file <environment-filename> ] [--use-local-image <app-nam> [<app-name>]*]"$ERED
256 # sourcing the selected env variables for the test case
257 if [ -f "$TEST_ENV_VAR_FILE" ]; then
258 echo -e $BOLD"Sourcing env vars from: "$TEST_ENV_VAR_FILE$EBOLD
261 echo -e $RED"Selected env var file does not exist: "$TEST_ENV_VAR_FILE$ERED
265 #Vars for A1 interface version and container count
273 # Vars to switch between http and https. Extra curl flag needed for https
274 export RIC_SIM_HTTPX="http"
275 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
276 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
277 export RIC_SIM_CERT_MOUNT_DIR="./cert"
279 export MR_HTTPX="http"
280 export MR_PORT=$MR_INTERNAL_PORT
281 export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
283 export CR_HTTPX="http"
284 export CR_PORT=$CR_INTERNAL_PORT
285 export CR_LOCAL_PORT=$CR_EXTERNAL_PORT #When CR is running outside the docker net
287 export PROD_STUB_HTTPX="http"
288 export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
289 export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_PORT #When CR is running outside the docker net
290 export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
292 export SDNC_HTTPX="http"
293 export SDNC_PORT=$SDNC_INTERNAL_PORT
294 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
296 echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
298 #Temp var to check for image variable name errors
300 #Create a file with image info for later printing as a table
301 image_list_file="./tmp/.image-list"
302 echo -e " Container\tImage\ttag" > $image_list_file
304 # Check if image env var is set and if so export the env var with image to use (used by docker compose files)
305 # arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>
306 __check_image_var() {
307 if [ $# -ne 6 ]; then
308 echo "Expected arg: <image name> <script start-arg> <target-variable-name> <image-variable-name> <image-tag-variable-name> <app-short-name>"
312 __check_included_image $6
313 if [ $? -ne 0 ]; then
314 echo -e "$1\t<image-excluded>\t<no-tag>" >> $image_list_file
315 # Image is excluded since the corresponding app is not used in this test
319 #Create var from the input var names
323 if [ -z $image ]; then
324 echo -e $RED"\$"$4" not set in test_env"$ERED
327 tmp=$tmp"<no-image>\t"
332 echo -e $RED"\$"$5" not set in test_env"$ERED
339 echo -e "$tmp" >> $image_list_file
341 export "${3}"=$image":"$tag
343 #echo " Configured image for ${1} (script start arg=${2}): "$image":"$tag
347 #Check if app local image shall override remote image
348 # Possible IDs for local image override: PA, CP, SDNC, RICSIM, ECS
349 __check_image_local_override() {
350 for im in $USE_LOCAL_IMAGES; do
351 if [ "$1" == "$im" ]; then
358 # Check if app uses image included in this test run
359 # Returns 0 if image is included, 1 if not
360 # Possible IDs for image inclusion: CBS, CONSUL, CP, CR, ECS, MR, PA, PRODSTUB, RICSIM, SDNC
361 __check_included_image() {
362 for im in $INCLUDED_IMAGES; do
363 if [ "$1" == "$im" ]; then
370 # Check that image env setting are available
373 if [ $START_ARG == "local" ]; then
376 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
378 #Local Control Panel image
379 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
382 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
385 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
387 elif [ $START_ARG == "remote" ] || [ $START_ARG == "remote-remove" ]; then
389 __check_image_local_override 'PA'
390 if [ $? -eq 0 ]; then
392 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_REMOTE_IMAGE" "POLICY_AGENT_REMOTE_IMAGE_TAG" PA
395 __check_image_var " Policy Agent" $START_ARG "POLICY_AGENT_IMAGE" "POLICY_AGENT_LOCAL_IMAGE" "POLICY_AGENT_LOCAL_IMAGE_TAG" PA
398 __check_image_local_override 'CP'
399 if [ $? -eq 0 ]; then
400 #Remote Control Panel image
401 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE" "CONTROL_PANEL_REMOTE_IMAGE_TAG" CP
403 #Local Control Panel image
404 __check_image_var " Control Panel" $START_ARG "CONTROL_PANEL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE" "CONTROL_PANEL_LOCAL_IMAGE_TAG" CP
407 __check_image_local_override 'SDNC'
408 if [ $? -eq 0 ]; then
410 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE" "SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG" SDNC
413 __check_image_var " SDNC A1 Controller" $START_ARG "SDNC_A1_CONTROLLER_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE" "SDNC_A1_CONTROLLER_LOCAL_IMAGE_TAG" SDNC
416 __check_image_local_override 'RICSIM'
417 if [ $? -eq 0 ]; then
418 #Remote ric sim image
419 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_REMOTE_IMAGE" "RIC_SIM_REMOTE_IMAGE_TAG" RICSIM
422 __check_image_var " RIC Simulator" $START_ARG "RIC_SIM_IMAGE" "RIC_SIM_LOCAL_IMAGE" "RIC_SIM_LOCAL_IMAGE_TAG" RICSIM
425 __check_image_local_override 'ECS'
426 if [ $? -eq 0 ]; then
428 __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_REMOTE_IMAGE" "ECS_REMOTE_IMAGE_TAG" ECS
431 __check_image_var " ECS" $START_ARG "ECS_IMAGE" "ECS_LOCAL_IMAGE" "ECS_LOCAL_IMAGE_TAG" ECS
435 #Should never get here....
436 echo "Unknow args: "$@
441 # These images are not built as part of this project official images, just check that env vars are set correctly
442 __check_image_var " Message Router" $START_ARG "MRSTUB_IMAGE" "MRSTUB_LOCAL_IMAGE" "MRSTUB_LOCAL_IMAGE_TAG" MR
443 __check_image_var " Callback Receiver" $START_ARG "CR_IMAGE" "CR_LOCAL_IMAGE" "CR_LOCAL_IMAGE_TAG" CR
444 __check_image_var " Producer stub" $START_ARG "PROD_STUB_IMAGE" "PROD_STUB_LOCAL_IMAGE" "PROD_STUB_LOCAL_IMAGE_TAG" PRODSTUB
445 __check_image_var " Consul" $START_ARG "CONSUL_IMAGE" "CONSUL_REMOTE_IMAGE" "CONSUL_REMOTE_IMAGE_TAG" CONSUL
446 __check_image_var " CBS" $START_ARG "CBS_IMAGE" "CBS_REMOTE_IMAGE" "CBS_REMOTE_IMAGE_TAG" CBS
447 __check_image_var " SDNC DB" $START_ARG "SDNC_DB_IMAGE" "SDNC_DB_REMOTE_IMAGE" "SDNC_DB_REMOTE_IMAGE_TAG" SDNC #Uses sdnc app name
449 #Errors in image setting - exit
450 if [ $IMAGE_ERR -ne 0 ]; then
454 #Print a tables of the image settings
455 echo -e $BOLD"Images configured for start arg: "$START $EBOLD
456 column -t -s $'\t' $image_list_file
461 #Set the SIM_GROUP var
462 echo -e $BOLD"Setting var to main dir of all container/simulator scripts"$EBOLD
463 if [ -z "$SIM_GROUP" ]; then
464 SIM_GROUP=$PWD/../simulator-group
465 if [ ! -d $SIM_GROUP ]; then
466 echo "Trying to set env var SIM_GROUP to dir 'simulator-group' in the nontrtric repo, but failed."
467 echo -e $RED"Please set the SIM_GROUP manually in the test_env.sh"$ERED
470 echo " SIM_GROUP auto set to: " $SIM_GROUP
472 elif [ $SIM_GROUP = *simulator_group ]; then
473 echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check common/test_env.sh"$ERED
476 echo " SIM_GROUP env var already set to: " $SIM_GROUP
481 #Temp var to check for image pull errors
484 #Function to check if image exist and stop+remove the container+pull new images as needed
485 #args <script-start-arg> <descriptive-image-name> <container-base-name> <image-with-tag>
486 __check_and_pull_image() {
488 echo -e " Checking $BOLD$2$EBOLD container(s) with basename: $BOLD$3$EBOLD using image: $BOLD$4$EBOLD"
489 format_string="\"{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\""
490 tmp_im=$(docker images --format $format_string ${4})
492 if [ $1 == "local" ]; then
493 if [ -z "$tmp_im" ]; then
494 echo -e " "$2" (local image): \033[1m"$4"\033[0m $RED does not exist in local registry, need to be built (or manually pulled)"$ERED
498 echo -e " "$2" (local image): \033[1m"$4"\033[0m "$GREEN"OK"$EGREEN
500 elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
501 if [ $1 == "remote-remove" ]; then
502 echo -ne " Attempt to stop and remove container(s), if running - ${SAMELINE}"
503 tmp="$(docker ps -aq --filter name=${3})"
504 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
505 docker stop $tmp &> ./tmp/.dockererr
506 if [ $? -ne 0 ]; then
509 echo -e $RED" Container(s) could not be stopped - try manual stopping the container(s)"$ERED
514 echo -ne " Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
515 tmp="$(docker ps -aq --filter name=${3})" &> /dev/null
516 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
517 docker rm $tmp &> ./tmp/.dockererr
518 if [ $? -ne 0 ]; then
521 echo -e $RED" Container(s) could not be removed - try manual removal of the container(s)"$ERED
526 echo -e " Attempt to stop and remove container(s), if running - "$GREEN"stopped removed"$EGREEN
527 echo -ne " Removing image - ${SAMELINE}"
528 tmp="$(docker images -q ${4})" &> /dev/null
529 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
530 docker rmi --force $4 &> ./tmp/.dockererr
531 if [ $? -ne 0 ]; then
534 echo -e $RED" Image could not be removed - try manual removal of the image"$ERED
538 echo -e " Removing image - "$GREEN"removed"$EGREEN
540 echo -e " Removing image - "$GREEN"image not in repository"$EGREEN
544 if [ -z "$tmp_im" ]; then
545 echo -ne " Pulling image${SAMELINE}"
546 docker pull $4 &> ./tmp/.dockererr
547 tmp_im=$(docker images ${4} | grep -v REPOSITORY)
548 if [ -z "$tmp_im" ]; then
550 echo -e " Pulling image -$RED could not be pulled"$ERED
555 echo -e " Pulling image -$GREEN Pulled $EGREEN"
557 echo -e " Pulling image -$GREEN OK $EGREEN(exists in local repository)"
564 echo -e $BOLD"Pulling configured images, if needed"$EBOLD
566 __check_included_image 'PA'
567 if [ $? -eq 0 ]; then
568 START_ARG_MOD=$START_ARG
569 __check_image_local_override 'PA'
570 if [ $? -eq 1 ]; then
571 START_ARG_MOD="local"
573 app="Policy Agent"; __check_and_pull_image $START_ARG_MOD "$app" $POLICY_AGENT_APP_NAME $POLICY_AGENT_IMAGE
575 echo -e $YELLOW" Excluding PA image from image check/pull"$EYELLOW
578 __check_included_image 'ECS'
579 if [ $? -eq 0 ]; then
580 START_ARG_MOD=$START_ARG
581 __check_image_local_override 'ECS'
582 if [ $? -eq 1 ]; then
583 START_ARG_MOD="local"
585 app="ECS"; __check_and_pull_image $START_ARG_MOD "$app" $ECS_APP_NAME $ECS_IMAGE
587 echo -e $YELLOW" Excluding ECS image from image check/pull"$EYELLOW
590 __check_included_image 'CP'
591 if [ $? -eq 0 ]; then
592 START_ARG_MOD=$START_ARG
593 __check_image_local_override 'CP'
594 if [ $? -eq 1 ]; then
595 START_ARG_MOD="local"
597 app="Non-RT RIC Control Panel"; __check_and_pull_image $START_ARG_MOD "$app" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_IMAGE
599 echo -e $YELLOW" Excluding Non-RT RIC Control Panel image from image check/pull"$EYELLOW
602 __check_included_image 'RICSIM'
603 if [ $? -eq 0 ]; then
604 START_ARG_MOD=$START_ARG
605 __check_image_local_override 'RICSIM'
606 if [ $? -eq 1 ]; then
607 START_ARG_MOD="local"
609 app="Near-RT RIC Simulator"; __check_and_pull_image $START_ARG_MOD "$app" $RIC_SIM_PREFIX"_"$RIC_SIM_BASE $RIC_SIM_IMAGE
611 echo -e $YELLOW" Excluding Near-RT RIC Simulator image from image check/pull"$EYELLOW
615 __check_included_image 'CONSUL'
616 if [ $? -eq 0 ]; then
617 app="Consul"; __check_and_pull_image $START_ARG "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
619 echo -e $YELLOW" Excluding Consul image from image check/pull"$EYELLOW
622 __check_included_image 'CBS'
623 if [ $? -eq 0 ]; then
624 app="CBS"; __check_and_pull_image $START_ARG "$app" $CBS_APP_NAME $CBS_IMAGE
626 echo -e $YELLOW" Excluding CBS image from image check/pull"$EYELLOW
629 __check_included_image 'SDNC'
630 if [ $? -eq 0 ]; then
631 START_ARG_MOD=$START_ARG
632 __check_image_local_override 'SDNC'
633 if [ $? -eq 1 ]; then
634 START_ARG_MOD="local"
636 app="SDNC A1 Controller"; __check_and_pull_image $START_ARG_MOD "$app" $SDNC_APP_NAME $SDNC_A1_CONTROLLER_IMAGE
637 app="SDNC DB"; __check_and_pull_image $START_ARG "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
639 echo -e $YELLOW" Excluding SDNC image and related DB image from image check/pull"$EYELLOW
642 #Errors in image setting - exit
643 if [ $IMAGE_ERR -ne 0 ]; then
645 echo "#################################################################################################"
646 echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
647 echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
648 echo "#################################################################################################"
655 echo -e $BOLD"Building images needed for test"$EBOLD
658 __check_included_image 'MR'
659 if [ $? -eq 0 ]; then
662 echo " Building mrstub image: $MRSTUB_LOCAL_IMAGE:$MRSTUB_LOCAL_IMAGE_TAG"
663 docker build -t $MRSTUB_LOCAL_IMAGE . &> .dockererr
664 if [ $? -eq 0 ]; then
665 echo -e $GREEN" Build Ok"$EGREEN
667 echo -e $RED" Build Failed"$ERED
673 echo -e $YELLOW" Excluding mrstub from image build"$EYELLOW
676 __check_included_image 'CR'
677 if [ $? -eq 0 ]; then
679 echo " Building Callback Receiver image: $CR_LOCAL_IMAGE:$CR_IMAGE_TAG"
680 docker build -t $CR_LOCAL_IMAGE . &> .dockererr
681 if [ $? -eq 0 ]; then
682 echo -e $GREEN" Build Ok"$EGREEN
684 echo -e $RED" Build Failed"$ERED
690 echo -e $YELLOW" Excluding Callback Receiver from image build"$EYELLOW
693 __check_included_image 'PRODSTUB'
694 if [ $? -eq 0 ]; then
696 echo " Building Producer stub image: $PROD_STUB_LOCAL_IMAGE:$PROD_STUB_LOCAL_IMAGE_TAG"
697 docker build -t $PROD_STUB_LOCAL_IMAGE . &> .dockererr
698 if [ $? -eq 0 ]; then
699 echo -e $GREEN" Build Ok"$EGREEN
701 echo -e $RED" Build Failed"$ERED
707 echo -e $YELLOW" Excluding Producer stub from image build"$EYELLOW
712 # Create a table of the images used in the script
713 echo -e $BOLD"Local docker registry images used in the this test script"$EBOLD
715 docker_tmp_file=./tmp/.docker-images-table
716 format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\\t{{.CreatedAt}}"
717 echo -e " Application\tRepository\tTag\tCreated since\tSize\tCreated at" > $docker_tmp_file
718 __check_included_image 'PA'
719 if [ $? -eq 0 ]; then
720 echo -e " Policy Agent\t$(docker images --format $format_string $POLICY_AGENT_IMAGE)" >> $docker_tmp_file
722 __check_included_image 'ECS'
723 if [ $? -eq 0 ]; then
724 echo -e " ECS\t$(docker images --format $format_string $ECS_IMAGE)" >> $docker_tmp_file
726 __check_included_image 'CP'
727 if [ $? -eq 0 ]; then
728 echo -e " Control Panel\t$(docker images --format $format_string $CONTROL_PANEL_IMAGE)" >> $docker_tmp_file
730 __check_included_image 'RICSIM'
731 if [ $? -eq 0 ]; then
732 echo -e " RIC Simulator\t$(docker images --format $format_string $RIC_SIM_IMAGE)" >> $docker_tmp_file
734 __check_included_image 'MR'
735 if [ $? -eq 0 ]; then
736 echo -e " Message Router\t$(docker images --format $format_string $MRSTUB_IMAGE)" >> $docker_tmp_file
738 __check_included_image 'CR'
739 if [ $? -eq 0 ]; then
740 echo -e " Callback Receiver\t$(docker images --format $format_string $CR_IMAGE)" >> $docker_tmp_file
742 __check_included_image 'PRODSTUB'
743 if [ $? -eq 0 ]; then
744 echo -e " Produccer stub\t$(docker images --format $format_string $PROD_STUB_IMAGE)" >> $docker_tmp_file
746 __check_included_image 'CONSUL'
747 if [ $? -eq 0 ]; then
748 echo -e " Consul\t$(docker images --format $format_string $CONSUL_IMAGE)" >> $docker_tmp_file
750 __check_included_image 'CBS'
751 if [ $? -eq 0 ]; then
752 echo -e " CBS\t$(docker images --format $format_string $CBS_IMAGE)" >> $docker_tmp_file
754 __check_included_image 'SDNC'
755 if [ $? -eq 0 ]; then
756 echo -e " SDNC A1 Controller\t$(docker images --format $format_string $SDNC_A1_CONTROLLER_IMAGE)" >> $docker_tmp_file
757 echo -e " SDNC DB\t$(docker images --format $format_string $SDNC_DB_IMAGE)" >> $docker_tmp_file
760 column -t -s $'\t' $docker_tmp_file
764 echo -e $BOLD"======================================================="$EBOLD
765 echo -e $BOLD"== Common test setup completed - test script begins =="$EBOLD
766 echo -e $BOLD"======================================================="$EBOLD
769 # Function to print the test result, shall be the last cmd in a test script
771 # (Function for test scripts)
775 duration=$((TCTEST_END-TCTEST_START))
777 echo "-------------------------------------------------------------------------------------------------"
778 echo "------------------------------------- Test case: "$ATC
779 echo "------------------------------------- Ended: "$(date)
780 echo "-------------------------------------------------------------------------------------------------"
781 echo "-- Description: "$TC_ONELINE_DESCR
782 echo "-- Execution time: " $duration " seconds"
783 echo "-------------------------------------------------------------------------------------------------"
784 echo "------------------------------------- RESULTS"
788 if [ $RES_DEVIATION -gt 0 ]; then
789 echo "Test case deviations"
790 echo "===================================="
794 echo "Timer measurement in the test script"
795 echo "===================================="
796 column -t -s $'\t' $TIMER_MEASUREMENTS
799 total=$((RES_PASS+RES_FAIL))
800 if [ $RES_TEST -eq 0 ]; then
801 echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
802 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
803 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
804 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
805 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
806 elif [ $total != $RES_TEST ]; then
807 echo -e "\033[1mTotal number of tests does not match the sum of passed and failed tests. Check the script....\033[0m"
808 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
809 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
810 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
811 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
812 elif [ $RES_CONF_FAIL -ne 0 ]; then
813 echo -e "\033[1mOne or more configure regest has failed. Check the script log....\033[0m"
814 echo -e "\033[31m\033[1m ___ ___ ___ ___ ___ _____ ___ _ ___ _ _ _ ___ ___ \033[0m"
815 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_ _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
816 echo -e "\033[31m\033[1m\__ \ (__| /| || _/ | | | _/ _ \ | || |_| |_| | / _| \033[0m"
817 echo -e "\033[31m\033[1m|___/\___|_|_\___|_| |_| |_/_/ \_\___|____\___/|_|_\___|\033[0m"
818 elif [ $RES_PASS = $RES_TEST ]; then
819 echo -e "All tests \033[32m\033[1mPASS\033[0m"
820 echo -e "\033[32m\033[1m ___ _ ___ ___ \033[0m"
821 echo -e "\033[32m\033[1m | _ \/_\ / __/ __| \033[0m"
822 echo -e "\033[32m\033[1m | _/ _ \\__ \__ \\ \033[0m"
823 echo -e "\033[32m\033[1m |_|/_/ \_\___/___/ \033[0m"
826 # Update test suite counter
827 if [ -f .tmp_tcsuite_pass_ctr ]; then
828 tmpval=$(< .tmp_tcsuite_pass_ctr)
830 echo $tmpval > .tmp_tcsuite_pass_ctr
832 if [ -f .tmp_tcsuite_pass ]; then
833 echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
835 #Create file with OK exit code
836 echo "0" > "$PWD/.result$ATC.txt"
838 echo -e "One or more tests with status \033[31m\033[1mFAIL\033[0m "
839 echo -e "\033[31m\033[1m ___ _ ___ _ \033[0m"
840 echo -e "\033[31m\033[1m | __/_\ |_ _| | \033[0m"
841 echo -e "\033[31m\033[1m | _/ _ \ | || |__ \033[0m"
842 echo -e "\033[31m\033[1m |_/_/ \_\___|____|\033[0m"
844 # Update test suite counter
845 if [ -f .tmp_tcsuite_fail_ctr ]; then
846 tmpval=$(< .tmp_tcsuite_fail_ctr)
848 echo $tmpval > .tmp_tcsuite_fail_ctr
850 if [ -f .tmp_tcsuite_fail ]; then
851 echo " - "$ATC " -- "$TC_ONELINE_DESCR" Execution time: "$duration" seconds" >> .tmp_tcsuite_fail
855 echo "++++ Number of tests: "$RES_TEST
856 echo "++++ Number of passed tests: "$RES_PASS
857 echo "++++ Number of failed tests: "$RES_FAIL
859 echo "++++ Number of failed configs: "$RES_CONF_FAIL
861 echo "++++ Number of test case deviations: "$RES_DEVIATION
863 echo "------------------------------------- Test case complete ---------------------------------"
864 echo "-------------------------------------------------------------------------------------------------"
868 #####################################################################
869 ###### Functions for start, configuring, stoping, cleaning etc ######
870 #####################################################################
872 # Start timer for time measurement
873 # args - (any args will be printed though)
875 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
877 echo " Timer started"
880 # Print the value of the time (in seconds)
881 # args - <timer message to print> - timer value and message will be printed both on screen
882 # and in the timer measurement report
884 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
885 if [ $# -lt 1 ]; then
887 __print_err "need 1 or more args, <timer message to print>" $@
890 duration=$(($SECONDS-$TC_TIMER))
891 if [ $duration -eq 0 ]; then
894 duration=$duration" seconds"
896 echo " Timer duration :" $duration
898 echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
901 # Print the value of the time (in seconds) and reset the timer
902 # args - <timer message to print> - timer value and message will be printed both on screen
903 # and in the timer measurement report
904 print_and_reset_timer() {
905 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
906 if [ $# -lt 1 ]; then
908 __print_err "need 1 or more args, <timer message to print>" $@
911 duration=$(($SECONDS-$TC_TIMER))" seconds"
912 if [ $duration -eq 0 ]; then
915 duration=$duration" seconds"
917 echo " Timer duration :" $duration
921 echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
924 # Print info about a deviations from intended tests
925 # Each deviation counted is also printed in the testreport
926 # args <deviation message to print>
928 echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
929 if [ $# -lt 1 ]; then
931 __print_err "need 1 or more args, <deviation message to print>" $@
935 echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
936 echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
940 # Stop at first FAIL test case and take all logs - only for debugging/trouble shooting
941 __check_stop_at_error() {
942 if [ $STOP_AT_ERROR -eq 1 ]; then
943 echo -e $RED"Test script configured to stop at first FAIL, taking all logs and stops"$ERED
944 store_logs "STOP_AT_ERROR"
950 # Check if app name var is set. If so return the app name otherwise return "NOTSET"
952 if [ $# -eq 1 ]; then
959 # Stop and remove all containers
961 # (Function for test scripts)
964 echo -e $BOLD"Stopping and removing all running containers, by container name"$EBOLD
966 CONTAINTER_NAMES=("Policy Agent " $(__check_app_name $POLICY_AGENT_APP_NAME)\
967 "ECS " $(__check_app_name $ECS_APP_NAME)\
968 "Non-RT RIC Simulator(s)" $(__check_app_name $RIC_SIM_PREFIX)\
969 "Message Router " $(__check_app_name $MR_APP_NAME)\
970 "Callback Receiver " $(__check_app_name $CR_APP_NAME)\
971 "Producer stub " $(__check_app_name $PROD_STUB_APP_NAME)\
972 "Control Panel " $(__check_app_name $CONTROL_PANEL_APP_NAME)\
973 "SDNC A1 Controller " $(__check_app_name $SDNC_APP_NAME)\
974 "SDNC DB " $(__check_app_name $SDNC_DB_APP_NAME)\
975 "CBS " $(__check_app_name $CBS_APP_NAME)\
976 "Consul " $(__check_app_name $CONSUL_APP_NAME))
978 nw=0 # Calc max width of container name, to make a nice table
979 for (( i=1; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
981 if [ ${#CONTAINTER_NAMES[i]} -gt $nw ]; then
982 nw=${#CONTAINTER_NAMES[i]}
986 for (( i=0; i<${#CONTAINTER_NAMES[@]} ; i+=2 )) ; do
987 APP="${CONTAINTER_NAMES[i]}"
988 CONTR="${CONTAINTER_NAMES[i+1]}"
989 if [ $CONTR != "NOTSET" ]; then
990 for((w=${#CONTR}; w<$nw; w=w+1)); do
993 echo -ne " $APP: $CONTR - ${GREEN}stopping${EGREEN}${SAMELINE}"
994 docker stop $(docker ps -qa --filter name=${CONTR}) &> /dev/null
995 echo -ne " $APP: $CONTR - ${GREEN}stopped${EGREEN}${SAMELINE}"
996 docker rm --force $(docker ps -qa --filter name=${CONTR}) &> /dev/null
997 echo -e " $APP: $CONTR - ${GREEN}stopped removed${EGREEN}"
1003 echo -e $BOLD" Removing docker network"$EBOLD
1004 TMP=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
1005 if [ "$TMP" == $DOCKER_SIM_NWNAME ]; then
1006 docker network rm $DOCKER_SIM_NWNAME | indent2
1007 if [ $? -ne 0 ]; then
1008 echo -e $RED" Cannot remove docker network. Manually remove or disconnect containers from $DOCKER_SIM_NWNAME"$ERED
1012 echo -e "$GREEN Done$EGREEN"
1014 echo -e $BOLD" Removing all unused docker neworks"$EBOLD
1015 docker network prune --force | indent2
1016 echo -e "$GREEN Done$EGREEN"
1018 echo -e $BOLD" Removing all unused docker volumes"$EBOLD
1019 docker volume prune --force | indent2
1020 echo -e "$GREEN Done$EGREEN"
1022 echo -e $BOLD" Removing all dangling/untagged docker images"$EBOLD
1023 docker rmi --force $(docker images -q -f dangling=true) &> /dev/null
1024 echo -e "$GREEN Done$EGREEN"
1027 CONTRS=$(docker ps | awk '$1 != "CONTAINER" { n++ }; END { print n+0 }')
1028 if [ $? -eq 0 ]; then
1029 if [ $CONTRS -ne 0 ]; then
1030 echo -e $RED"Containers running, may cause distubance to the test case"$ERED
1036 # Function stop and remove all container in the end of the test script, if the arg 'auto-clean' is given at test script start
1038 # (Function for test scripts)
1039 auto_clean_containers() {
1041 if [ "$AUTO_CLEAN" == "auto" ]; then
1042 echo -e $BOLD"Initiating automatic cleaning of started containers"$EBOLD
1047 # Function to sleep a test case for a numner of seconds. Prints the optional text args as info
1048 # args: <sleep-time-in-sec> [any-text-in-quotes-to-be-printed]
1049 # (Function for test scripts)
1052 echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
1053 if [ $# -lt 1 ]; then
1055 __print_err "need at least one arg, <sleep-time-in-sec> [any-text-to-printed]" $@
1058 #echo "---- Sleep for " $1 " seconds ---- "$2
1060 duration=$((SECONDS-start))
1061 while [ $duration -lt $1 ]; do
1062 echo -ne " Slept for ${duration} seconds${SAMELINE}"
1064 duration=$((SECONDS-start))
1066 echo -ne " Slept for ${duration} seconds${SAMELINE}"
1070 # Print error info for the call in the parent script (test case). Arg: <error-message-to-print>
1071 # Not to be called from the test script itself.
1073 echo -e $RED ${FUNCNAME[1]} " "$1" " ${BASH_SOURCE[2]} " line" ${BASH_LINENO[1]} $ERED
1074 if [ $# -gt 1 ]; then
1075 echo -e $RED" Got: "${FUNCNAME[1]} ${@:2} $ERED
1080 # Helper function to get a the port of a specific ric simulatpor
1082 # (Not for test scripts)
1084 name=$1" " #Space appended to prevent matching 10 if 1 is desired....
1085 cmdstr="docker inspect --format='{{(index (index .NetworkSettings.Ports \"$RIC_SIM_PORT/tcp\") 0).HostPort}}' ${name}"
1087 if [[ "$res" =~ ^[0-9]+$ ]]; then
1094 # Function to create the docker network for the test
1095 # Not to be called from the test script itself.
1096 __create_docker_network() {
1097 tmp=$(docker network ls --format={{.Name}} --filter name=$DOCKER_SIM_NWNAME)
1098 if [ $? -ne 0 ]; then
1099 echo -e $RED" Could not check if docker network $DOCKER_SIM_NWNAME exists"$ERED
1102 if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
1103 echo -e " Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
1104 docker network create $DOCKER_SIM_NWNAME | indent2
1105 if [ $? -ne 0 ]; then
1106 echo -e $RED" Could not create docker network $DOCKER_SIM_NWNAME"$ERED
1109 echo -e "$GREEN Done$EGREEN"
1112 echo -e " Docker network $DOCKER_SIM_NWNAME already exists$GREEN OK $EGREEN"
1116 # Check if container is started by calling url on localhost using a port, expects response code 2XX
1117 # args: <container-name> <port> <url> https|https
1118 # Not to be called from the test script itself.
1119 __check_container_start() {
1121 if [ $# -ne 4 ]; then
1123 elif [ $4 != "http" ] && [ $4 != "https" ]; then
1126 if [ $paramError -ne 0 ]; then
1128 __print_err "need 3 args, <container-name> <port> <url> https|https" $@
1131 echo -ne " Container $BOLD$1$EBOLD starting${SAMELINE}"
1135 if [[ $appname != "STANDALONE_"* ]] ; then
1137 for i in {1..10}; do
1138 if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
1139 echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
1146 if [ $app_started -eq 0 ]; then
1149 echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
1152 if [ $localport -eq 0 ]; then
1153 while [ $localport -eq 0 ]; do
1154 echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
1155 localport=$(__find_sim_port $appname)
1157 echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
1159 echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
1165 echo -ne " Waiting for container ${appname} service status...${SAMELINE}"
1167 for i in {1..50}; do
1168 if [ $4 == "https" ]; then
1169 result="$(__do_curl "-k https://localhost:"${localport}${url})"
1171 result="$(__do_curl $LOCALHOST${localport}${url})"
1173 if [ $? -eq 0 ]; then
1174 if [ ${#result} -gt 15 ]; then
1175 #If response is too long, truncate
1176 result="...response text too long, omitted"
1178 echo -ne " Waiting for container $BOLD${appname}$EBOLD service status, result: $result${SAMELINE}"
1179 echo -ne " Container $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN after $(($SECONDS-$TSTART)) seconds"
1184 while [ $(($TS_TMP+$i)) -gt $SECONDS ]; do
1185 echo -ne " Waiting for container ${appname} service status...retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
1191 if [ "$pa_st" = "false" ]; then
1193 echo -e $RED" Container ${appname} did not respond to service status"$ERED
1202 # Function to start a container and wait until it responds on the given port and url.
1203 #args: <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> [<app-name> <port-number> <alive-url>]*
1204 __start_container() {
1206 variableArgCount=$(($#-2))
1207 if [ $# -lt 6 ] && [ [ $(($variableArgCount%4)) -ne 0 ]; then
1209 __print_err "need 6 or more args, <docker-compose-dir> NODOCKERARGS|<docker-compose-arg> <app-name> <port-number> <alive-url> http|https [<app-name> <port-number> <alive-url> http|https ]*" $@
1213 __create_docker_network
1219 if [ "$2" == "NODOCKERARGS" ]; then
1220 docker-compose up -d &> .dockererr
1221 if [ $? -ne 0 ]; then
1222 echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
1225 elif [ "$2" == "STANDALONE" ]; then
1226 echo "Skipping docker-compose"
1228 docker-compose up -d $2 &> .dockererr
1229 if [ $? -ne 0 ]; then
1230 echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
1235 if [ "$2" == "STANDALONE" ]; then
1236 app_prefix="STANDALONE_"
1240 while [ $cntr -lt $variableArgCount ]; do
1241 app=$app_prefix$1; shift;
1247 __check_container_start "$app" "$port" "$url" $httpx
1255 # Generate a UUID to use as prefix for policy ids
1257 UUID=$(python3 -c 'import sys,uuid; sys.stdout.write(uuid.uuid4().hex)')
1258 #Reduce length to make space for serial id, us 'a' as marker where the serial id is added
1259 UUID=${UUID:0:${#UUID}-4}"a"
1262 ####################
1263 ### Consul functions
1264 ####################
1266 # Function to load config from a file into consul for the Policy Agent
1267 # arg: <json-config-file>
1268 # (Function for test scripts)
1269 consul_config_app() {
1271 echo -e $BOLD"Configuring Consul"$EBOLD
1273 if [ $# -ne 1 ]; then
1275 __print_err "need one arg, <json-config-file>" $@
1279 echo " Loading config for "$POLICY_AGENT_APP_NAME" from "$1
1281 curlString="$LOCALHOST${CONSUL_EXTERNAL_PORT}/v1/kv/${POLICY_AGENT_APP_NAME}?dc=dc1 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @"$1
1282 result=$(__do_curl "$curlString")
1283 if [ $? -ne 0 ]; then
1284 echo -e $RED" FAIL - json config could not be loaded to consul" $ERED
1288 body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
1289 echo $body > "./tmp/.output"$1
1291 if [ $? -ne 0 ]; then
1292 echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
1297 targetJson="{\"config\":"$targetJson"}"
1298 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1299 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1300 if [ $res -ne 0 ]; then
1301 echo -e $RED" FAIL - policy json config read from consul/cbs is not equal to the intended json config...." $ERED
1305 echo -e $GREEN" Config loaded ok to consul"$EGREEN
1313 # Function to perpare the consul configuration according to the current simulator configuration
1314 # args: SDNC|NOSDNC <output-file>
1315 # (Function for test scripts)
1316 prepare_consul_config() {
1317 echo -e $BOLD"Prepare Consul config"$EBOLD
1319 echo " Writing consul config for "$POLICY_AGENT_APP_NAME" to file: "$2
1321 if [ $# != 2 ]; then
1323 __print_err "need two args, SDNC|NOSDNC <output-file>" $@
1327 if [ $1 == "SDNC" ]; then
1328 echo -e " Config$BOLD including SDNC$EBOLD configuration"
1329 elif [ $1 == "NOSDNC" ]; then
1330 echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
1333 __print_err "need two args, SDNC|NOSDNC <output-file>" $@
1338 if [ $1 == "SDNC" ]; then
1339 config_json=$config_json"\n \"controller\": ["
1340 config_json=$config_json"\n {"
1341 config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
1342 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1343 config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
1345 config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
1347 config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
1348 config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
1349 config_json=$config_json"\n }"
1350 config_json=$config_json"\n ],"
1353 config_json=$config_json"\n \"streams_publishes\": {"
1354 config_json=$config_json"\n \"dmaap_publisher\": {"
1355 config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
1356 config_json=$config_json"\n \"dmaap_info\": {"
1357 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1358 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
1360 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
1362 config_json=$config_json"\n }"
1363 config_json=$config_json"\n }"
1364 config_json=$config_json"\n },"
1365 config_json=$config_json"\n \"streams_subscribes\": {"
1366 config_json=$config_json"\n \"dmaap_subscriber\": {"
1367 config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
1368 config_json=$config_json"\n \"dmaap_info\": {"
1369 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1370 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
1372 config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
1374 config_json=$config_json"\n }"
1375 config_json=$config_json"\n }"
1376 config_json=$config_json"\n },"
1378 config_json=$config_json"\n \"ric\": ["
1380 rics=$(docker ps | grep $RIC_SIM_PREFIX | awk '{print $NF}')
1382 if [ $? -ne 0 ] || [ -z "$rics" ]; then
1383 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
1389 for ric in $rics; do
1390 if [ $cntr -gt 0 ]; then
1391 config_json=$config_json"\n ,"
1393 config_json=$config_json"\n {"
1394 config_json=$config_json"\n \"name\": \"$ric\","
1395 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1396 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
1398 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
1400 if [ $1 == "SDNC" ]; then
1401 config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
1403 config_json=$config_json"\n \"managedElementIds\": ["
1404 config_json=$config_json"\n \"me1_$ric\","
1405 config_json=$config_json"\n \"me2_$ric\""
1406 config_json=$config_json"\n ]"
1407 config_json=$config_json"\n }"
1411 config_json=$config_json"\n ]"
1412 config_json=$config_json"\n}"
1415 printf "$config_json">$2
1421 # Start Consul and CBS
1423 # (Function for test scripts)
1424 start_consul_cbs() {
1426 echo -e $BOLD"Starting Consul and CBS"$EBOLD
1427 __check_included_image 'CONSUL'
1428 if [ $? -eq 1 ]; then
1429 echo -e $RED"The Consul image has not been checked for this test run due to arg to the test script"$ERED
1430 echo -e $RED"Consul will not be started"$ERED
1433 __start_container consul_cbs NODOCKERARGS "$CONSUL_APP_NAME" "$CONSUL_EXTERNAL_PORT" "/ui/dc1/kv" "http" \
1434 "$CBS_APP_NAME" "$CBS_EXTERNAL_PORT" "/healthcheck" "http"
1437 ###########################
1438 ### RIC Simulator functions
1439 ###########################
1441 use_simulator_http() {
1442 echo -e "Using $BOLD http $EBOLD towards the simulators"
1443 export RIC_SIM_HTTPX="http"
1444 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1445 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
1449 use_simulator_https() {
1450 echo -e "Using $BOLD https $EBOLD towards the simulators"
1451 export RIC_SIM_HTTPX="https"
1452 export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
1453 export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
1457 # Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
1458 # 'ricsim' may be set on command line to other prefix
1459 # args: ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
1460 # (Function for test scripts)
1461 start_ric_simulators() {
1463 echo -e $BOLD"Starting RIC Simulators"$EBOLD
1465 __check_included_image 'RICSIM'
1466 if [ $? -eq 1 ]; then
1467 echo -e $RED"The Near-RT RIC Simulator image has not been checked for this test run due to arg to the test script"$ERED
1468 echo -e $RED"The Near-RT RIC Simulartor(s) will not be started"$ERED
1472 RIC1=$RIC_SIM_PREFIX"_g1"
1473 RIC2=$RIC_SIM_PREFIX"_g2"
1474 RIC3=$RIC_SIM_PREFIX"_g3"
1476 if [ $# != 3 ]; then
1478 __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
1481 echo " $2 simulators using basename: $1 on interface: $3"
1482 #Set env var for simulator count and A1 interface vesion for the given group
1483 if [ $1 == "$RIC1" ]; then
1486 elif [ $1 == "$RIC2" ]; then
1489 elif [ $1 == "$RIC3" ]; then
1494 __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
1498 # Create .env file to compose project, all ric container will get this prefix
1499 echo "COMPOSE_PROJECT_NAME="$RIC_SIM_PREFIX > $SIM_GROUP/ric/.env
1501 export G1_A1_VERSION
1502 export G2_A1_VERSION
1503 export G3_A1_VERSION
1505 docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT"
1508 while [ $cntr -le $2 ]; do
1511 app_data="$app_data $app $port / "$RIC_SIM_HTTPX
1514 __start_container ric "$docker_args" $app_data
1518 ###########################
1519 ### Control Panel functions
1520 ###########################
1522 # Start the Control Panel container
1524 # (Function for test scripts)
1525 start_control_panel() {
1527 echo -e $BOLD"Starting Control Panel"$EBOLD
1528 __check_included_image 'CP'
1529 if [ $? -eq 1 ]; then
1530 echo -e $RED"The Control Panel image has not been checked for this test run due to arg to the test script"$ERED
1531 echo -e $RED"The Control Panel will not be started"$ERED
1534 __start_container control_panel NODOCKERARGS $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_EXTERNAL_PORT "/" "http"
1542 # Start the SDNC A1 Controller
1544 # (Function for test scripts)
1547 echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
1549 __check_included_image 'SDNC'
1550 if [ $? -eq 1 ]; then
1551 echo -e $RED"The image for SDNC and the related DB has not been checked for this test run due to arg to the test script"$ERED
1552 echo -e $RED"SDNC will not be started"$ERED
1556 __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
1561 echo -e "Using $BOLD http $EBOLD towards SDNC"
1562 export SDNC_HTTPX="http"
1563 export SDNC_PORT=$SDNC_INTERNAL_PORT
1564 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
1569 echo -e "Using $BOLD https $EBOLD towards SDNC"
1570 export SDNC_HTTPX="https"
1571 export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
1572 export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
1576 #####################
1577 ### MR stub functions
1578 #####################
1580 # Start the Message Router stub interface in the simulator group
1582 # (Function for test scripts)
1585 echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
1586 __check_included_image 'MR'
1587 if [ $? -eq 1 ]; then
1588 echo -e $RED"The Message Router image has not been checked for this test run due to arg to the test script"$ERED
1589 echo -e $RED"The Message Router will not be started"$ERED
1592 export MR_CERT_MOUNT_DIR="./cert"
1593 __start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
1597 echo -e "Using $BOLD http $EBOLD towards MR"
1598 export MR_HTTPX="http"
1599 export MR_PORT=$MR_INTERNAL_PORT
1600 export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
1605 echo -e "Using $BOLD https $EBOLD towards MR"
1606 export MR_HTTPX="https"
1607 export MR_PORT=$MR_INTERNAL_SECURE_PORT
1608 export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
1617 # Start the Callback reciver in the simulator group
1619 # (Function for test scripts)
1622 echo -e $BOLD"Starting Callback Receiver"$EBOLD
1623 __check_included_image 'CR'
1624 if [ $? -eq 1 ]; then
1625 echo -e $RED"The Callback Receiver image has not been checked for this test run due to arg to the test script"$ERED
1626 echo -e $RED"The Callback Receiver will not be started"$ERED
1629 __start_container cr NODOCKERARGS $CR_APP_NAME $CR_EXTERNAL_PORT "/" "http"
1634 echo -e "Using $BOLD http $EBOLD towards CR"
1635 export CR_HTTPX="http"
1636 export CR_PORT=$CR_INTERNAL_PORT
1637 export CR_LOCAL_PORT=$CR_EXTERNAL_PORT
1642 echo -e "Using $BOLD https $EBOLD towards CR"
1643 export CR_HTTPX="https"
1644 export CR_PORT=$CR_INTERNAL_SECURE_PORT
1645 export CR_LOCAL_PORT=$CR_EXTERNAL_SECURE_PORT
1649 ###########################
1650 ### Producer stub functions
1651 ###########################
1653 # Start the Producer stub in the simulator group
1655 # (Function for test scripts)
1658 echo -e $BOLD"Starting Producer stub"$EBOLD
1659 __check_included_image 'PRODSTUB'
1660 if [ $? -eq 1 ]; then
1661 echo -e $RED"The Producer stub image has not been checked for this test run due to arg to the test script"$ERED
1662 echo -e $RED"The Producer stub will not be started"$ERED
1665 __start_container prodstub NODOCKERARGS $PROD_STUB_APP_NAME $PROD_STUB_EXTERNAL_PORT "/" "http"
1669 use_prod_stub_http() {
1670 echo -e "Using $BOLD http $EBOLD towards Producer stub"
1671 export PROD_STUB_HTTPX="http"
1672 export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
1673 export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_PORT
1674 export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
1678 use_prod_stub_https() {
1679 echo -e "Using $BOLD https $EBOLD towards Producer stub"
1680 export PROD_STUB_HTTPX="https"
1681 export PROD_STUB_PORT=$PROD_STUB_INTERNAL_SECURE_PORT
1682 export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_SECURE_PORT
1683 export PROD_STUB_LOCALHOST=$PROD_STUB_HTTPX"://localhost:"$PROD_STUB_LOCAL_PORT
1687 ###########################
1688 ### Policy Agents functions
1689 ###########################
1691 # Use an agent on the local machine instead of container
1692 use_agent_stand_alone() {
1696 # Start the policy agent
1698 # (Function for test scripts)
1699 start_policy_agent() {
1701 echo -e $BOLD"Starting Policy Agent"$EBOLD
1703 if [ $AGENT_STAND_ALONE -eq 0 ]; then
1704 __check_included_image 'PA'
1705 if [ $? -eq 1 ]; then
1706 echo -e $RED"The Policy Agent image has not been checked for this test run due to arg to the test script"$ERED
1707 echo -e $RED"The Policy Agent will not be started"$ERED
1710 __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1712 echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
1713 echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
1714 echo -e $RED"application.yaml"$ERED
1715 echo -e $RED"The application jar may need to be built before continuing"$ERED
1716 echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
1718 read -p "<press any key to continue>"
1719 __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
1724 # All calls to the agent will be directed to the agent REST interface from now on
1726 # (Function for test scripts)
1727 use_agent_rest_http() {
1728 echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent"
1729 export ADAPTER=$RESTBASE
1733 # All calls to the agent will be directed to the agent REST interface from now on
1735 # (Function for test scripts)
1736 use_agent_rest_https() {
1737 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
1738 export ADAPTER=$RESTBASE_SECURE
1743 # All calls to the agent will be directed to the agent dmaap interface over http from now on
1745 # (Function for test scripts)
1746 use_agent_dmaap_http() {
1747 echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
1748 export ADAPTER=$DMAAPBASE
1753 # All calls to the agent will be directed to the agent dmaap interface over https from now on
1755 # (Function for test scripts)
1756 use_agent_dmaap_https() {
1757 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
1758 export ADAPTER=$DMAAPBASE_SECURE
1763 # Turn on debug level tracing in the agent
1765 # (Function for test scripts)
1767 echo -e $BOLD"Setting agent debug"$EBOLD
1768 curlString="$LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
1769 result=$(__do_curl "$curlString")
1770 if [ $? -ne 0 ]; then
1771 __print_err "could not set debug mode" $@
1779 # Turn on trace level tracing in the agent
1781 # (Function for test scripts)
1783 echo -e $BOLD"Setting agent trace"$EBOLD
1784 curlString="$LOCALHOST$POLICY_AGENT_EXTERNAL_PORT/actuator/loggers/org.oransc.policyagent -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
1785 result=$(__do_curl "$curlString")
1786 if [ $? -ne 0 ]; then
1787 __print_err "could not set trace mode" $@
1795 # Perform curl retries when making direct call to the agent for the specified http response codes
1796 # Speace separated list of http response codes
1797 # args: [<response-code>]*
1798 use_agent_retries() {
1799 echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
1800 AGENT_RETRY_CODES=$@
1805 ###########################
1807 ###########################
1811 # (Function for test scripts)
1814 echo -e $BOLD"Starting ECS"$EBOLD
1815 __check_included_image 'ECS'
1816 if [ $? -eq 1 ]; then
1817 echo -e $RED"The ECS image has not been checked for this test run due to arg to the test script"$ERED
1818 echo -e $RED"ECS will not be started"$ERED
1821 export ECS_CERT_MOUNT_DIR="./cert"
1822 __start_container ecs NODOCKERARGS $ECS_APP_NAME $ECS_EXTERNAL_PORT "/status" "http"
1825 # All calls to ECS will be directed to the ECS REST interface from now on
1827 # (Function for test scripts)
1828 use_ecs_rest_http() {
1829 echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
1830 export ECS_ADAPTER=$ECS_RESTBASE
1834 # All calls to ECS will be directed to the ECS REST interface from now on
1836 # (Function for test scripts)
1837 use_ecs_rest_https() {
1838 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
1839 export ECS_ADAPTER=$ECS_RESTBASE_SECURE
1844 # All calls to ECS will be directed to the ECS dmaap interface over http from now on
1846 # (Function for test scripts)
1847 use_ecs_dmaap_http() {
1848 echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
1849 export ECS_ADAPTER=$ECS_DMAAPBASE
1854 # All calls to ECS will be directed to the ECS dmaap interface over https from now on
1856 # (Function for test scripts)
1857 use_ecs_dmaap_https() {
1858 echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
1859 export ECS_ADAPTER=$ECS_DMAAPBASE_SECURE
1864 # Turn on debug level tracing in ECS
1866 # (Function for test scripts)
1868 echo -e $BOLD"Setting ecs debug"$EBOLD
1869 curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
1870 result=$(__do_curl "$curlString")
1871 if [ $? -ne 0 ]; then
1872 __print_err "Could not set debug mode" $@
1880 # Turn on trace level tracing in ECS
1882 # (Function for test scripts)
1884 echo -e $BOLD"Setting ecs trace"$EBOLD
1885 curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
1886 result=$(__do_curl "$curlString")
1887 if [ $? -ne 0 ]; then
1888 __print_err "Could not set trace mode" $@
1896 # Perform curl retries when making direct call to ECS for the specified http response codes
1897 # Speace separated list of http response codes
1898 # args: [<response-code>]*
1899 use_agent_retries() {
1900 echo -e $BOLD"Do curl retries to the ECS REST inteface for these response codes:$@"$EBOLD
1901 ECS_AGENT_RETRY_CODES=$@
1910 # Check the agent logs for WARNINGs and ERRORs
1912 # (Function for test scripts)
1914 check_policy_agent_logs() {
1915 __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH WARN ERR
1919 __check_container_logs "ECS" $ECS_APP_NAME $ECS_LOGPATH WARN ERR
1922 check_control_panel_logs() {
1923 __check_container_logs "Control Panel" $CONTROL_PANEL_APP_NAME $CONTROL_PANEL_LOGPATH WARN ERR
1927 __check_container_logs "SDNC A1 Controller" $SDNC_APP_NAME $SDNC_KARAF_LOG WARN ERROR
1930 __check_container_logs() {
1937 echo -e $BOLD"Checking $dispname container $appname log ($logpath) for WARNINGs and ERRORs"$EBOLD
1939 #tmp=$(docker ps | grep $appname)
1940 tmp=$(docker ps -q --filter name=$appname) #get the container id
1941 if [ -z "$tmp" ]; then #Only check logs for running Policy Agent apps
1942 echo $dispname" is not running, no check made"
1945 foundentries="$(docker exec -t $tmp grep $warning $logpath | wc -l)"
1946 if [ $? -ne 0 ];then
1947 echo " Problem to search $appname log $logpath"
1949 if [ $foundentries -eq 0 ]; then
1950 echo " No WARN entries found in $appname log $logpath"
1952 echo -e " Found \033[1m"$foundentries"\033[0m WARN entries in $appname log $logpath"
1955 foundentries="$(docker exec -t $tmp grep $error $logpath | wc -l)"
1956 if [ $? -ne 0 ];then
1957 echo " Problem to search $appname log $logpath"
1959 if [ $foundentries -eq 0 ]; then
1960 echo " No ERR entries found in $appname log $logpath"
1962 echo -e $RED" Found \033[1m"$foundentries"\033[0m"$RED" ERR entries in $appname log $logpath"$ERED
1968 # Store all container logs and other logs in the log dir for the script
1969 # Logs are stored with a prefix in case logs should be stored several times during a test
1970 # args: <logfile-prefix>
1971 # (Function for test scripts)
1973 if [ $# != 1 ]; then
1975 __print_err "need one arg, <file-prefix>" $@
1978 echo -e $BOLD"Storing all container logs using prefix: "$1$EBOLD
1980 docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
1982 __check_included_image 'CONSUL'
1983 if [ $? -eq 0 ]; then
1984 docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
1987 __check_included_image 'CBS'
1988 if [ $? -eq 0 ]; then
1989 docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
1990 body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
1991 echo "$body" > $TESTLOGS/$ATC/$1_consul_config.json 2>&1
1994 __check_included_image 'PA'
1995 if [ $? -eq 0 ]; then
1996 docker logs $POLICY_AGENT_APP_NAME > $TESTLOGS/$ATC/$1_policy-agent.log 2>&1
1999 __check_included_image 'ECS'
2000 if [ $? -eq 0 ]; then
2001 docker logs $ECS_APP_NAME > $TESTLOGS/$ATC/$1_ecs.log 2>&1
2004 __check_included_image 'CP'
2005 if [ $? -eq 0 ]; then
2006 docker logs $CONTROL_PANEL_APP_NAME > $TESTLOGS/$ATC/$1_control-panel.log 2>&1
2009 __check_included_image 'MR'
2010 if [ $? -eq 0 ]; then
2011 docker logs $MR_APP_NAME > $TESTLOGS/$ATC/$1_mr.log 2>&1
2014 __check_included_image 'CR'
2015 if [ $? -eq 0 ]; then
2016 docker logs $CR_APP_NAME > $TESTLOGS/$ATC/$1_cr.log 2>&1
2019 cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
2021 __check_included_image 'SDNC'
2022 if [ $? -eq 0 ]; then
2023 docker exec -t $SDNC_APP_NAME cat $SDNC_KARAF_LOG> $TESTLOGS/$ATC/$1_SDNC_karaf.log 2>&1
2026 __check_included_image 'RICSIM'
2027 if [ $? -eq 0 ]; then
2028 rics=$(docker ps -f "name=$RIC_SIM_PREFIX" --format "{{.Names}}")
2029 for ric in $rics; do
2030 docker logs $ric > $TESTLOGS/$ATC/$1_$ric.log 2>&1
2040 # Generic curl function, assumes all 200-codes are ok
2041 # args: <valid-curl-args-including full url>
2042 # returns: <returned response (without respose code)> or "<no-response-from-server>" or "<not found, <http-code>>""
2043 # returns: The return code is 0 for ok and 1 for not ok
2045 echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
2046 curlString="curl -skw %{http_code} $@"
2047 echo " CMD: $curlString" >> $HTTPLOG
2049 echo " RESP: $res" >> $HTTPLOG
2050 http_code="${res:${#res}-3}"
2051 if [ ${#res} -eq 3 ]; then
2052 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
2053 echo "<no-response-from-server>"
2056 echo "X2" >> $HTTPLOG
2060 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
2061 echo "<not found, resp:${http_code}>"
2064 if [ $# -eq 2 ]; then
2065 echo "${res:0:${#res}-3}" | xargs
2067 echo "${res:0:${#res}-3}"
2074 #######################################
2075 ### Basic helper function for test cases
2076 #######################################
2078 # Test a simulator container variable value towards target value using an condition operator with an optional timeout.
2079 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> - This test is done
2080 # immediately and sets pass or fail depending on the result of comparing variable and target using the operator.
2081 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> <timeout> - This test waits up to the timeout
2082 # before setting pass or fail depending on the result of comparing variable and target using the operator.
2083 # If the <variable-name> has the 'json:' prefix, the the variable will be used as url and the <target-value> will be compared towards the length of the json array in the response.
2084 # Not to be called from test script.
2087 checkjsonarraycount=0
2089 if [ $# -eq 6 ]; then
2090 if [[ $3 == "json:"* ]]; then
2091 checkjsonarraycount=1
2094 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
2099 if [ $checkjsonarraycount -eq 0 ]; then
2100 result="$(__do_curl $2$3)"
2102 result=${result//[[:blank:]]/} #Strip blanks
2105 result="$(__do_curl $2$path)"
2107 echo "$result" > ./tmp/.tmp.curl.json
2108 result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
2110 duration=$((SECONDS-start))
2111 echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
2113 if [ $retcode -ne 0 ]; then
2114 if [ $duration -gt $6 ]; then
2116 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
2117 __check_stop_at_error
2120 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
2122 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2123 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2125 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2127 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2128 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2130 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2132 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2133 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2135 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2137 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2138 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2141 if [ $duration -gt $6 ]; then
2143 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
2144 __check_stop_at_error
2150 elif [ $# -eq 5 ]; then
2151 if [[ $3 == "json:"* ]]; then
2152 checkjsonarraycount=1
2155 echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
2157 if [ $checkjsonarraycount -eq 0 ]; then
2158 result="$(__do_curl $2$3)"
2160 result=${result//[[:blank:]]/} #Strip blanks
2163 result="$(__do_curl $2$path)"
2165 echo "$result" > ./tmp/.tmp.curl.json
2166 result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
2168 if [ $retcode -ne 0 ]; then
2170 echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
2171 __check_stop_at_error
2172 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
2174 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2175 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2177 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2178 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2180 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2181 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2183 echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2186 echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
2187 __check_stop_at_error
2190 echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
2197 ### Generic test cases for varaible checking
2199 # Tests if a variable value in the CR is equal to a target value and and optional timeout.
2200 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2201 # equal to the target or not.
2202 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2203 # before setting pass or fail depending on if the variable value becomes equal to the target
2205 # (Function for test scripts)
2207 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2208 __var_test "CR" "$LOCALHOST$CR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
2211 __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2215 # Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
2216 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2217 # equal to the target or not.
2218 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2219 # before setting pass or fail depending on if the variable value becomes equal to the target
2221 # (Function for test scripts)
2223 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2224 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
2227 __print_err "Wrong args to mr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2231 # Tests if a variable value in the MR stub is greater than a target value and and optional timeout.
2232 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
2233 # greater than the target or not.
2234 # Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
2235 # before setting pass or fail depending on if the variable value becomes greater than the target
2237 # (Function for test scripts)
2239 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
2240 __var_test "MR" "$LOCALHOST$MR_EXTERNAL_PORT/counter/" $1 ">" $2 $3
2243 __print_err "Wrong args to mr_greater, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
2247 # Read a variable value from MR sim and send to stdout. Arg: <variable-name>
2249 echo "$(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"
2252 # Print a variable value from the MR stub.
2253 # arg: <variable-name>
2254 # (Function for test scripts)
2256 if [ $# != 1 ]; then
2258 __print_err "need one arg, <mr-param>" $@
2261 echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD