Uplift of PMS source from ONAP
[nonrtric.git] / test / common / testcase_common.sh
1 #!/bin/bash
2
3 #  ============LICENSE_START===============================================
4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 #  ========================================================================
6 #  Licensed under the Apache License, Version 2.0 (the "License");
7 #  you may not use this file except in compliance with the License.
8 #  You may obtain a copy of the License at
9 #
10 #       http://www.apache.org/licenses/LICENSE-2.0
11 #
12 #  Unless required by applicable law or agreed to in writing, software
13 #  distributed under the License is distributed on an "AS IS" BASIS,
14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 #  See the License for the specific language governing permissions and
16 #  limitations under the License.
17 #  ============LICENSE_END=================================================
18 #
19
20 # This is a script that contains all the common functions needed for auto test.
21 # Specific test function are defined in scripts  XXXX_functions.sh
22
23 . ../common/api_curl.sh
24 . ../common/testengine_config.sh
25
26 __print_args() {
27         echo "Args: remote|remote-remove docker|kube --env-file <environment-filename> [release] [auto-clean] [--stop-at-error] "
28         echo "      [--ricsim-prefix <prefix> ] [--use-local-image <app-nam>+]  [--use-snapshot-image <app-nam>+]"
29         echo "      [--use-staging-image <app-nam>+] [--use-release-image <app-nam>+] [--image-repo <repo-address]"
30         echo "      [--repo-policy local|remote] [--cluster-timeout <timeout-in seconds>] [--print-stats]"
31 }
32
33 if [ $# -eq 1 ] && [ "$1" == "help" ]; then
34
35         if [ ! -z "$TC_ONELINE_DESCR" ]; then
36                 echo "Test script description:"
37                 echo $TC_ONELINE_DESCR
38                 echo ""
39         fi
40         __print_args
41         echo ""
42         echo "remote                -  Use images from remote repositories. Can be overridden for individual images using the '--use_xxx' flags"
43         echo "remote-remove         -  Same as 'remote' but will also try to pull fresh images from remote repositories"
44         echo "docker                -  Test executed in docker environment"
45         echo "kube                  -  Test executed in kubernetes environment - requires an already started kubernetes environment"
46         echo "--env-file            -  The script will use the supplied file to read environment variables from"
47         echo "release               -  If this flag is given the script will use release version of the images"
48         echo "auto-clean            -  If the function 'auto_clean_containers' is present in the end of the test script then all containers will be stopped and removed. If 'auto-clean' is not given then the function has no effect."
49     echo "--stop-at-error       -  The script will stop when the first failed test or configuration"
50         echo "--ricsim-prefix       -  The a1 simulator will use the supplied string as container prefix instead of 'ricsim'"
51         echo "--use-local-image     -  The script will use local images for the supplied apps, space separated list of app short names"
52         echo "--use-snapshot-image  -  The script will use images from the nexus snapshot repo for the supplied apps, space separated list of app short names"
53         echo "--use-staging-image   -  The script will use images from the nexus staging repo for the supplied apps, space separated list of app short names"
54         echo "--use-release-image   -  The script will use images from the nexus release repo for the supplied apps, space separated list of app short names"
55         echo "--image-repo          -  Url to optional image repo. Only locally built images will be re-tagged and pushed to this repo"
56         echo "--repo-policy         -  Policy controlling which images to re-tag and push if param --image-repo is set. Default is 'local'"
57         echo "--cluster-timeout     -  Optional timeout for cluster where it takes time to obtain external ip/host-name. Timeout in seconds. "
58         echo "--print-stats         -  Print current test stats after each test."
59
60         echo ""
61         echo "List of app short names supported: "$APP_SHORT_NAMES
62         exit 0
63 fi
64
65 AUTOTEST_HOME=$PWD
66 # Create a test case id, ATC (Auto Test Case), from the name of the test case script.
67 # FTC1.sh -> ATC == FTC1
68 ATC=$(basename "${BASH_SOURCE[$i+1]}" .sh)
69
70 #Create result file (containing '1' for error) for this test case
71 #Will be replaced with a file containing '0' if all test cases pass
72 echo "1" > "$PWD/.result$ATC.txt"
73
74 #Formatting for 'echo' cmd
75 BOLD="\033[1m"
76 EBOLD="\033[0m"
77 RED="\033[31m\033[1m"
78 ERED="\033[0m"
79 GREEN="\033[32m\033[1m"
80 EGREEN="\033[0m"
81 YELLOW="\033[33m\033[1m"
82 EYELLOW="\033[0m"
83 SAMELINE="\033[0K\r"
84
85 # Just resetting any previous echo formatting...
86 echo -ne $EBOLD
87
88 # default test environment variables
89 TEST_ENV_VAR_FILE=""
90
91 echo "Test case started as: ${BASH_SOURCE[$i+1]} "$@
92
93 #Localhost constants
94 LOCALHOST_NAME="localhost"
95 LOCALHOST_HTTP="http://localhost"
96 LOCALHOST_HTTPS="https://localhost"
97
98 # Var to hold 'auto' in case containers shall be stopped when test case ends
99 AUTO_CLEAN=""
100
101 # Var to hold the app names to use local images for
102 USE_LOCAL_IMAGES=""
103
104 # Var to hold the app names to use remote snapshot images for
105 USE_SNAPSHOT_IMAGES=""
106
107 # Var to hold the app names to use remote staging images for
108 USE_STAGING_IMAGES=""
109
110 # Var to hold the app names to use remote release images for
111 USE_RELEASE_IMAGES=""
112
113
114 # Use this var (STOP_AT_ERROR=1 in the test script) for debugging/trouble shooting to take all logs and exit at first FAIL test case
115 STOP_AT_ERROR=0
116
117 # The default value "DEV" indicate that development image tags (SNAPSHOT) and nexus repos (nexus port 10002) are used.
118 # The value "RELEASE" indicate that relase image tag and nexus repos (nexus port) are used
119 # Applies only to images defined in the test-env files with image names and tags defined as XXXX_RELEASE
120 IMAGE_CATEGORY="DEV"
121
122 # Function to indent cmd output with one space
123 indent1() { sed 's/^/ /'; }
124
125 # Function to indent cmd output with two spaces
126 indent2() { sed 's/^/  /'; }
127
128 # Set a description string for the test case
129 if [ -z "$TC_ONELINE_DESCR" ]; then
130         TC_ONELINE_DESCR="<no-description>"
131         echo "No test case description found, TC_ONELINE_DESCR should be set on in the test script , using "$TC_ONELINE_DESCR
132 fi
133
134 # Counter for test suites
135 if [ -f .tmp_tcsuite_ctr ]; then
136         tmpval=$(< .tmp_tcsuite_ctr)
137         ((tmpval++))
138         echo $tmpval > .tmp_tcsuite_ctr
139 fi
140
141 # Create the logs dir if not already created in the current dir
142 if [ ! -d "logs" ]; then
143     mkdir logs
144 fi
145 TESTLOGS=$PWD/logs
146
147 # Create the tmp dir for temporary files that is not needed after the test
148 # hidden files for the test env is still stored in the current dir
149 # files in the ./tmp is moved to ./tmp/prev when a new test is started
150 if [ ! -d "tmp" ]; then
151     mkdir tmp
152 fi
153 curdir=$PWD
154 cd tmp
155 if [ $? -ne 0 ]; then
156         echo "Cannot cd to $PWD/tmp"
157         echo "Dir cannot be created. Exiting...."
158 fi
159 if [ ! -d "prev" ]; then
160     mkdir prev
161 fi
162 cd $curdir
163 mv ./tmp/* ./tmp/prev 2> /dev/null
164
165 # Create a http message log for this testcase
166 HTTPLOG=$PWD"/.httplog_"$ATC".txt"
167 echo "" > $HTTPLOG
168
169 # Create a log dir for the test case
170 mkdir -p $TESTLOGS/$ATC
171
172 # Save create for current logs
173 mkdir -p $TESTLOGS/$ATC/previous
174
175 rm $TESTLOGS/$ATC/previous/*.log &> /dev/null
176 rm $TESTLOGS/$ATC/previous/*.txt &> /dev/null
177 rm $TESTLOGS/$ATC/previous/*.json &> /dev/null
178
179 mv  $TESTLOGS/$ATC/*.log $TESTLOGS/$ATC/previous &> /dev/null
180 mv  $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
181 mv  $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
182
183 # Clear the log dir for the test case
184 rm $TESTLOGS/$ATC/*.log &> /dev/null
185 rm $TESTLOGS/$ATC/*.txt &> /dev/null
186 rm $TESTLOGS/$ATC/*.json &> /dev/null
187
188 # Log all output from the test case to a TC log
189 TCLOG=$TESTLOGS/$ATC/TC.log
190 exec &>  >(tee ${TCLOG})
191
192 #Variables for counting tests as well as passed and failed tests
193 RES_TEST=0
194 RES_PASS=0
195 RES_FAIL=0
196 RES_CONF_FAIL=0
197 RES_DEVIATION=0
198
199 #Var to control if current stats shall be printed
200 PRINT_CURRENT_STATS=0
201
202 #File to keep deviation messages
203 DEVIATION_FILE=".tmp_deviations"
204 rm $DEVIATION_FILE &> /dev/null
205
206 # Trap "command not found" and make the script fail
207 trap_fnc() {
208
209         if [ $? -eq 127 ]; then
210                 echo -e $RED"Function not found, setting script to FAIL"$ERED
211                 ((RES_CONF_FAIL++))
212                 __print_current_stats
213         fi
214 }
215 trap trap_fnc ERR
216
217 # Counter for tests
218 TEST_SEQUENCE_NR=1
219
220 # Function to log the start of a test case
221 __log_test_start() {
222         TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
223         echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${FUNCNAME[1]}" $@ $EBOLD
224     echo "TEST $TEST_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): ${FUNCNAME[1]}" $@ >> $HTTPLOG
225         ((RES_TEST++))
226         ((TEST_SEQUENCE_NR++))
227 }
228
229 # Function to print current statistics
230 __print_current_stats() {
231         if [ $PRINT_CURRENT_STATS -ne 0 ]; then
232                 echo " Current stats - exe-time, tests, passes, fails, conf fails, deviations: $(($SECONDS-$TCTEST_START)), $RES_TEST, $RES_PASS, $RES_FAIL, $RES_CONF_FAIL, $RES_DEVIATION"
233         fi
234 }
235
236 # General function to log a failed test case
237 __log_test_fail_general() {
238         echo -e $RED" FAIL."$1 $ERED
239         ((RES_FAIL++))
240         __print_current_stats
241         __check_stop_at_error
242 }
243
244 # Function to log a test case failed due to incorrect response code
245 __log_test_fail_status_code() {
246         echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
247         ((RES_FAIL++))
248         __print_current_stats
249         __check_stop_at_error
250 }
251
252 # Function to log a test case failed due to incorrect response body
253 __log_test_fail_body() {
254         echo -e $RED" FAIL, returned body not correct"$ERED
255         ((RES_FAIL++))
256         __print_current_stats
257         __check_stop_at_error
258 }
259
260 # Function to log a test case that is not supported
261 __log_test_fail_not_supported() {
262         echo -e $RED" FAIL, function not supported"$ERED
263         ((RES_FAIL++))
264         __print_current_stats
265         __check_stop_at_error
266 }
267
268 # General function to log a passed test case
269 __log_test_pass() {
270         if [ $# -gt 0 ]; then
271                 echo $@
272         fi
273         ((RES_PASS++))
274         echo -e $GREEN" PASS"$EGREEN
275         __print_current_stats
276 }
277
278 #Counter for configurations
279 CONF_SEQUENCE_NR=1
280
281 # Function to log the start of a configuration setup
282 __log_conf_start() {
283         TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
284         echo -e $BOLD"CONF $CONF_SEQUENCE_NR (${BASH_LINENO[1]}): "${FUNCNAME[1]} $@ $EBOLD
285         echo "CONF $CONF_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): "${FUNCNAME[1]} $@  >> $HTTPLOG
286         ((CONF_SEQUENCE_NR++))
287 }
288
289 # Function to log a failed configuration setup
290 __log_conf_fail_general() {
291         echo -e $RED" FAIL."$1 $ERED
292         ((RES_CONF_FAIL++))
293         __print_current_stats
294         __check_stop_at_error
295 }
296
297 # Function to log a failed configuration setup due to incorrect response code
298 __log_conf_fail_status_code() {
299         echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
300         ((RES_CONF_FAIL++))
301         __print_current_stats
302         __check_stop_at_error
303 }
304
305 # Function to log a failed configuration setup due to incorrect response body
306 __log_conf_fail_body() {
307         echo -e $RED" FAIL, returned body not correct"$ERED
308         ((RES_CONF_FAIL++))
309         __print_current_stats
310         __check_stop_at_error
311 }
312
313 # Function to log a configuration that is not supported
314 __log_conf_fail_not_supported() {
315         echo -e $RED" FAIL, function not supported"$ERED$@
316         ((RES_CONF_FAIL++))
317         __print_current_stats
318         __check_stop_at_error
319 }
320
321 # Function to log a passed configuration setup
322 __log_conf_ok() {
323         if [ $# -gt 0 ]; then
324                 echo $@
325         fi
326         echo -e $GREEN" OK"$EGREEN
327         __print_current_stats
328 }
329
330 #Var for measuring execution time
331 TCTEST_START=$SECONDS
332
333 #File to save timer measurement results
334 TIMER_MEASUREMENTS=".timer_measurement.txt"
335 echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
336
337 # If this is set, some images (control by the parameter repo-polcy) will be re-tagged and pushed to this repo before any
338 IMAGE_REPO_ADR=""
339 IMAGE_REPO_POLICY="local"
340 CLUSTER_TIME_OUT=0
341
342 echo "-------------------------------------------------------------------------------------------------"
343 echo "-----------------------------------      Test case: "$ATC
344 echo "-----------------------------------      Started:   "$(date)
345 echo "-------------------------------------------------------------------------------------------------"
346 echo "-- Description: "$TC_ONELINE_DESCR
347 echo "-------------------------------------------------------------------------------------------------"
348 echo "-----------------------------------      Test case setup      -----------------------------------"
349
350 echo "Setting AUTOTEST_HOME="$AUTOTEST_HOME
351 START_ARG=$1
352 paramerror=0
353 paramerror_str=""
354 if [ $# -lt 1 ]; then
355         paramerror=1
356 fi
357 if [ $paramerror -eq 0 ]; then
358         if [ "$1" != "remote" ] && [ "$1" != "remote-remove" ]; then
359                 paramerror=1
360                 if [ -z "$paramerror_str" ]; then
361                         paramerror_str="First arg shall be 'remote' or 'remote-remove'"
362                 fi
363         else
364                 shift;
365         fi
366 fi
367 if [ $paramerror -eq 0 ]; then
368         if [ "$1" != "docker" ] && [ "$1" != "kube" ]; then
369                 paramerror=1
370                 if [ -z "$paramerror_str" ]; then
371                         paramerror_str="Second arg shall be 'docker' or 'kube'"
372                 fi
373         else
374                 if [ $1 == "docker" ]; then
375                         RUNMODE="DOCKER"
376                         echo "Setting RUNMODE=DOCKER"
377                 fi
378                 if [ $1 == "kube" ]; then
379                         RUNMODE="KUBE"
380                         echo "Setting RUNMODE=KUBE"
381                 fi
382                 shift;
383         fi
384 fi
385 foundparm=0
386 while [ $paramerror -eq 0 ] && [ $foundparm -eq 0 ]; do
387         foundparm=1
388         if [ $paramerror -eq 0 ]; then
389                 if [ "$1" == "release" ]; then
390                         IMAGE_CATEGORY="RELEASE"
391                         echo "Option set - Release image tags used for applicable images "
392                         shift;
393                         foundparm=0
394                 fi
395         fi
396         if [ $paramerror -eq 0 ]; then
397                 if [ "$1" == "auto-clean" ]; then
398                         AUTO_CLEAN="auto"
399                         echo "Option set - Auto clean at end of test script"
400                         shift;
401                         foundparm=0
402                 fi
403         fi
404         if [ $paramerror -eq 0 ]; then
405                 if [ "$1" == "--stop-at-error" ]; then
406                         STOP_AT_ERROR=1
407                         echo "Option set - Stop at first error"
408                         shift;
409                         foundparm=0
410                 fi
411         fi
412         if [ $paramerror -eq 0 ]; then
413                 if [ "$1" == "--ricsim-prefix" ]; then
414                         shift;
415                         TMP_RIC_SIM_PREFIX=$1  #RIC_SIM_PREFIX need to be updated after sourcing of the env file
416                         if [ -z "$1" ]; then
417                                 paramerror=1
418                                 if [ -z "$paramerror_str" ]; then
419                                         paramerror_str="No prefix found for flag: '--ricsim-prefix'"
420                                 fi
421                         else
422                                 echo "Option set - Overriding RIC_SIM_PREFIX with: "$1
423                                 shift;
424                                 foundparm=0
425                         fi
426                 fi
427         fi
428         if [ $paramerror -eq 0 ]; then
429                 if [ "$1" == "--env-file" ]; then
430                         shift;
431                         TEST_ENV_VAR_FILE=$1
432                         if [ -z "$1" ]; then
433                                 paramerror=1
434                                 if [ -z "$paramerror_str" ]; then
435                                         paramerror_str="No env file found for flag: '--env-file'"
436                                 fi
437                         else
438                                 echo "Option set - Reading test env from: "$1
439                                 shift;
440                                 foundparm=0
441                         fi
442                 fi
443         fi
444         if [ $paramerror -eq 0 ]; then
445                 if [ "$1" == "--use-local-image" ]; then
446                         USE_LOCAL_IMAGES=""
447                         shift
448                         while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
449                                 USE_LOCAL_IMAGES=$USE_LOCAL_IMAGES" "$1
450                                 if [[ "$AVAILABLE_IMAGES_OVERRIDE" != *"$1"* ]]; then
451                                         paramerror=1
452                                         if [ -z "$paramerror_str" ]; then
453                                                 paramerror_str="App name $1 is not available for local override for flag: '--use-local-image'"
454                                         fi
455                                 fi
456                                 shift;
457                         done
458                         foundparm=0
459                         if [ -z "$USE_LOCAL_IMAGES" ]; then
460                                 paramerror=1
461                                 if [ -z "$paramerror_str" ]; then
462                                         paramerror_str="No app name found for flag: '--use-local-image'"
463                                 fi
464                         else
465                                 echo "Option set - Overriding with local images for app(s):"$USE_LOCAL_IMAGES
466                         fi
467                 fi
468         fi
469         if [ $paramerror -eq 0 ]; then
470                 if [ "$1" == "--use-snapshot-image" ]; then
471                         USE_SNAPSHOT_IMAGES=""
472                         shift
473                         while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
474                                 USE_SNAPSHOT_IMAGES=$USE_SNAPSHOT_IMAGES" "$1
475                                 if [[ "$AVAILABLE_IMAGES_OVERRIDE" != *"$1"* ]]; then
476                                         paramerror=1
477                                         if [ -z "$paramerror_str" ]; then
478                                                 paramerror_str="App name $1 is not available for snapshot override for flag: '--use-snapshot-image'"
479                                         fi
480                                 fi
481                                 shift;
482                         done
483                         foundparm=0
484                         if [ -z "$USE_SNAPSHOT_IMAGES" ]; then
485                                 paramerror=1
486                                 if [ -z "$paramerror_str" ]; then
487                                         paramerror_str="No app name found for flag: '--use-snapshot-image'"
488                                 fi
489                         else
490                                 echo "Option set - Overriding with snapshot images for app(s):"$USE_SNAPSHOT_IMAGES
491                         fi
492                 fi
493         fi
494         if [ $paramerror -eq 0 ]; then
495                 if [ "$1" == "--use-staging-image" ]; then
496                         USE_STAGING_IMAGES=""
497                         shift
498                         while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
499                                 USE_STAGING_IMAGES=$USE_STAGING_IMAGES" "$1
500                                 if [[ "$AVAILABLE_IMAGES_OVERRIDE" != *"$1"* ]]; then
501                                         paramerror=1
502                                         if [ -z "$paramerror_str" ]; then
503                                                 paramerror_str="App name $1 is not available for staging override for flag: '--use-staging-image'"
504                                         fi
505                                 fi
506                                 shift;
507                         done
508                         foundparm=0
509                         if [ -z "$USE_STAGING_IMAGES" ]; then
510                                 paramerror=1
511                                 if [ -z "$paramerror_str" ]; then
512                                         paramerror_str="No app name found for flag: '--use-staging-image'"
513                                 fi
514                         else
515                                 echo "Option set - Overriding with staging images for app(s):"$USE_STAGING_IMAGES
516                         fi
517                 fi
518         fi
519         if [ $paramerror -eq 0 ]; then
520                 if [ "$1" == "--use-release-image" ]; then
521                         USE_RELEASE_IMAGES=""
522                         shift
523                         while [ $# -gt 0 ] && [[ "$1" != "--"* ]]; do
524                                 USE_RELEASE_IMAGES=$USE_RELEASE_IMAGES" "$1
525                                 if [[ "$AVAILABLE_IMAGES_OVERRIDE" != *"$1"* ]]; then
526                                         paramerror=1
527                                         if [ -z "$paramerror_str" ]; then
528                                                 paramerror_str="App name $1 is not available for release override for flag: '--use-release-image'"
529                                         fi
530                                 fi
531                                 shift;
532                         done
533                         foundparm=0
534                         if [ -z "$USE_RELEASE_IMAGES" ]; then
535                                 paramerror=1
536                                 if [ -z "$paramerror_str" ]; then
537                                         paramerror_str="No app name found for flag: '--use-release-image'"
538                                 fi
539                         else
540                                 echo "Option set - Overriding with release images for app(s):"$USE_RELEASE_IMAGES
541                         fi
542                 fi
543         fi
544         if [ $paramerror -eq 0 ]; then
545                 if [ "$1" == "--image-repo" ]; then
546                         shift;
547                         IMAGE_REPO_ADR=$1
548                         if [ -z "$1" ]; then
549                                 paramerror=1
550                                 if [ -z "$paramerror_str" ]; then
551                                         paramerror_str="No image repo url found for : '--image-repo'"
552                                 fi
553                         else
554                                 echo "Option set - Image repo url: "$1
555                                 shift;
556                                 foundparm=0
557                         fi
558                 fi
559         fi
560         if [ $paramerror -eq 0 ]; then
561                 if [ "$1" == "--repo-policy" ]; then
562                         shift;
563                         IMAGE_REPO_POLICY=$1
564                         if [ -z "$1" ]; then
565                                 paramerror=1
566                                 if [ -z "$paramerror_str" ]; then
567                                         paramerror_str="No policy found for : '--repo-policy'"
568                                 fi
569                         else
570                             if [ "$1" == "local" ] || [ "$1" == "remote" ]; then
571                                         echo "Option set - Image repo policy: "$1
572                                         shift;
573                                         foundparm=0
574                                 else
575                                         paramerror=1
576                                         if [ -z "$paramerror_str" ]; then
577                                                 paramerror_str="Repo policy shall be 'local' or 'remote'"
578                                         fi
579                                 fi
580                         fi
581                 fi
582         fi
583         if [ $paramerror -eq 0 ]; then
584                 if [ "$1" == "--cluster-timeout" ]; then
585                         shift;
586                         CLUSTER_TIME_OUT=$1
587                         if [ -z "$1" ]; then
588                                 paramerror=1
589                                 if [ -z "$paramerror_str" ]; then
590                                         paramerror_str="No timeout value found for : '--cluster-timeout'"
591                                 fi
592                         else
593                                 #Check if positive int
594                                 case ${CLUSTER_TIME_OUT#[+]} in
595                                         *[!0-9]* | '')
596                                                 paramerror=1
597                                                 if [ -z "$paramerror_str" ]; then
598                                                         paramerror_str="Value for '--cluster-timeout' not an int : "$CLUSTER_TIME_OUT
599                                                 fi
600                                                 ;;
601                                         * ) ;; # Ok
602                                 esac
603                                 echo "Option set - Cluster timeout: "$1
604                                 shift;
605                                 foundparm=0
606                         fi
607                 fi
608         fi
609         if [ $paramerror -eq 0 ]; then
610                 if [ "$1" == "--print-stats" ]; then
611                         PRINT_CURRENT_STATS=1
612                         echo "Option set - Print stats"
613                         shift;
614                         foundparm=0
615                 fi
616         fi
617 done
618 echo ""
619
620 #Still params left?
621 if [ $paramerror -eq 0 ] && [ $# -gt 0 ]; then
622         paramerror=1
623         if [ -z "$paramerror_str" ]; then
624                 paramerror_str="Unknown parameter(s): "$@
625         fi
626 fi
627
628 if [ $paramerror -eq 1 ]; then
629         echo -e $RED"Incorrect arg list: "$paramerror_str$ERED
630         __print_args
631         exit 1
632 fi
633
634 # sourcing the selected env variables for the test case
635 if [ -f "$TEST_ENV_VAR_FILE" ]; then
636         echo -e $BOLD"Sourcing env vars from: "$TEST_ENV_VAR_FILE$EBOLD
637         . $TEST_ENV_VAR_FILE
638
639         if [ -z "$TEST_ENV_PROFILE" ] || [ -z "$SUPPORTED_PROFILES" ]; then
640                 echo -e $YELLOW"This test case may not work with selected test env file. TEST_ENV_PROFILE is missing in test_env file or SUPPORTED_PROFILES is missing in test case file"$EYELLOW
641         else
642                 found_profile=0
643                 for prof in $SUPPORTED_PROFILES; do
644                         if [ "$TEST_ENV_PROFILE" == "$prof" ]; then
645                                 echo -e $GREEN"Test case supports the selected test env file"$EGREEN
646                                 found_profile=1
647                         fi
648                 done
649                 if [ $found_profile -ne 1 ]; then
650                         echo -e $RED"Test case does not support the selected test env file"$ERED
651                         echo "Profile: "$TEST_ENV_PROFILE"     Supported profiles: "$SUPPORTED_PROFILES
652                         echo -e $RED"Exiting...."$ERED
653                         exit 1
654                 fi
655         fi
656 else
657         echo -e $RED"Selected env var file does not exist: "$TEST_ENV_VAR_FILE$ERED
658         echo " Select one of following env var file matching the intended target of the test"
659         echo " Restart the test using the flag '--env-file <path-to-env-file>"
660         ls $AUTOTEST_HOME/../common/test_env* | indent1
661         exit 1
662 fi
663
664 #This var need be preserved from the command line option, if set, when env var is sourced.
665 if [ ! -z "$TMP_RIC_SIM_PREFIX" ]; then
666         RIC_SIM_PREFIX=$TMP_RIC_SIM_PREFIX
667 fi
668
669 if [ -z "$PROJECT_IMAGES_APP_NAMES" ]; then
670         echo -e $RED"Var PROJECT_IMAGES_APP_NAMES must be defined in: "$TEST_ENV_VAR_FILE $ERED
671         exit 1
672 fi
673
674 if [[ $SUPPORTED_RUNMODES != *"$RUNMODE"* ]]; then
675         echo -e $RED"This test script does not support RUNMODE $RUNMODE"$ERED
676         echo "Supported RUNMODEs: "$SUPPORTED_RUNMODES
677         exit 1
678 fi
679
680 # Choose list of included apps depending on run-mode
681 if [ $RUNMODE == "KUBE" ]; then
682         INCLUDED_IMAGES=$KUBE_INCLUDED_IMAGES
683 else
684         INCLUDED_IMAGES=$DOCKER_INCLUDED_IMAGES
685 fi
686
687 # Check needed installed sw
688 tmp=$(which python3)
689 if [ $? -ne 0 ] || [ -z tmp ]; then
690         echo -e $RED"python3 is required to run the test environment, pls install"$ERED
691         exit 1
692 fi
693 tmp=$(which docker)
694 if [ $? -ne 0 ] || [ -z tmp ]; then
695         echo -e $RED"docker is required to run the test environment, pls install"$ERED
696         exit 1
697 fi
698
699 tmp=$(which docker-compose)
700 if [ $? -ne 0 ] || [ -z tmp ]; then
701         if [ $RUNMODE == "DOCKER" ]; then
702                 echo -e $RED"docker-compose is required to run the test environment, pls install"$ERED
703                 exit 1
704         fi
705 fi
706
707 tmp=$(which kubectl)
708 if [ $? -ne 0 ] || [ -z tmp ]; then
709         if [ $RUNMODE == "KUBE" ]; then
710                 echo -e $RED"kubectl is required to run the test environment in kubernetes mode, pls install"$ERED
711                 exit 1
712         fi
713 else
714         if [ $RUNMODE == "KUBE" ]; then
715                 res=$(kubectl cluster-info 2>&1)
716                 if [ $? -ne 0 ]; then
717                         echo -e "$BOLD$RED############################################# $ERED$EBOLD"
718                         echo -e  $BOLD$RED"Command 'kubectl cluster-info' returned error $ERED$EBOLD"
719                         echo -e "$BOLD$RED############################################# $ERED$EBOLD"
720                         echo " "
721                         echo "kubectl response:"
722                         echo $res
723                         echo " "
724                         echo "This script may have been started with user with no permission to run kubectl"
725                         echo "Try running with 'sudo' or set 'KUBECONFIG'"
726                         echo "Do either 1, 2 or 3 "
727                         echo " "
728                         echo "1"
729                         echo "Run with sudo"
730                         echo -e $BOLD"sudo <test-script-and-parameters>"$EBOLD
731                         echo " "
732                         echo "2"
733                         echo "Export KUBECONFIG and pass env to sudo - (replace user)"
734                         echo -e $BOLD"export KUBECONFIG='/home/<user>/.kube/config'"$EBOLD
735                         echo -e $BOLD"sudo -E <test-script-and-parameters>"$EBOLD
736                         echo " "
737                         echo "3"
738                         echo "Set KUBECONFIG inline (replace user)"
739                         echo -e $BOLD"sudo  KUBECONFIG='/home/<user>/.kube/config' <test-script-and-parameters>"$EBOLD
740
741                         exit 1
742                 fi
743         fi
744 fi
745
746 echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
747
748 #Temp var to check for image variable name errors
749 IMAGE_ERR=0
750 #Create a file with image info for later printing as a table
751 image_list_file="./tmp/.image-list"
752 echo -e "Application\tApp short name\tImage\ttag\ttag-switch" > $image_list_file
753
754 # Check if image env var is set and if so export the env var with image to use (used by docker compose files)
755 # arg: <app-short-name> <target-variable-name> <image-variable-name> <image-tag-variable-name> <tag-suffix> <image name>
756 __check_and_create_image_var() {
757
758         if [ $# -ne 6 ]; then
759                 echo "Expected arg: <app-short-name> <target-variable-name> <image-variable-name> <image-tag-variable-name> <tag-suffix> <image name>"
760                 ((IMAGE_ERR++))
761                 return
762         fi
763
764         __check_included_image $1
765         if [ $? -ne 0 ]; then
766                 echo -e "$6\t$1\t<image-excluded>\t<no-tag>"  >> $image_list_file
767                 # Image is excluded since the corresponding app is not used in this test
768                 return
769         fi
770         tmp=${6}"\t"${1}"\t"
771         #Create var from the input var names
772         image="${!3}"
773         tmptag=$4"_"$5
774         tag="${!tmptag}"
775
776         optional_image_repo_target=""
777
778         if [ -z $image ]; then
779                 __check_ignore_image $1
780                 if [ $? -eq 0 ]; then
781                         app_ds=$6
782                         if [ -z "$6" ]; then
783                                 app_ds="<app ignored>"
784                         fi
785                         echo -e "$app_ds\t$1\t<image-ignored>\t<no-tag>"  >> $image_list_file
786                         # Image is ignored since the corresponding the images is not set in the env file
787                         __remove_included_image $1   # Remove the image from the list of included images
788                         return
789                 fi
790                 echo -e $RED"\$"$3" not set in $TEST_ENV_VAR_FILE"$ERED
791                 ((IMAGE_ERR++))
792                 echo ""
793                 tmp=$tmp"<no-image>\t"
794         else
795
796                 optional_image_repo_target=$image
797
798                 #Add repo depending on image type
799                 if [ "$5" == "REMOTE_RELEASE" ]; then
800                         image=$NEXUS_RELEASE_REPO$image
801                 fi
802                 if [ "$5" == "REMOTE" ]; then
803                         image=$NEXUS_STAGING_REPO$image
804                 fi
805                 if [ "$5" == "REMOTE_SNAPSHOT" ]; then
806                         image=$NEXUS_SNAPSHOT_REPO$image
807                 fi
808                 if [ "$5" == "REMOTE_PROXY" ]; then
809                         image=$NEXUS_PROXY_REPO$image
810                 fi
811                 if [ "$5" == "REMOTE_RELEASE_ONAP" ]; then
812                         image=$NEXUS_RELEASE_REPO_ONAP$image
813                 fi
814                 if [ "$5" == "REMOTE_RELEASE_ORAN" ]; then
815                         image=$NEXUS_RELEASE_REPO_ORAN$image
816                 fi
817                 #No nexus repo added for local images, tag: LOCAL
818                 tmp=$tmp$image"\t"
819         fi
820         if [ -z $tag ]; then
821                 echo -e $RED"\$"$tmptag" not set in $TEST_ENV_VAR_FILE"$ERED
822                 ((IMAGE_ERR++))
823                 echo ""
824                 tmp=$tmp"<no-tag>\t"
825         else
826                 tmp=$tmp$tag
827         fi
828         tmp=$tmp"\t"$5
829         echo -e "$tmp" >> $image_list_file
830         #Export the env var
831         export "${2}"=$image":"$tag  #Note, this var may be set to the value of the target value below in __check_and_pull_image
832
833         remote_or_local_push=false
834         if [ ! -z "$IMAGE_REPO_ADR" ] && [[ $5 != *"PROXY"* ]]; then
835                 if [ $5 == "LOCAL" ]; then
836                         remote_or_local_push=true
837                 fi
838                 if [[ $5 == *"REMOTE"* ]]; then
839                         if [ "$IMAGE_REPO_POLICY" == "remote" ]; then
840                                 remote_or_local_push=true
841                         fi
842                 fi
843         fi
844         if $remote_or_local_push; then    # Only re-tag and push images according to policy, if repo is given
845                 export "${2}_SOURCE"=$image":"$tag  #Var to keep the actual source image
846                 if [[ $optional_image_repo_target == *"/"* ]]; then # Replace all / with _ for images to push to external repo
847                         optional_image_repo_target_tmp=${optional_image_repo_target//\//_}
848                         optional_image_repo_target=$optional_image_repo_target_tmp
849                 fi
850                 export "${2}_TARGET"=$IMAGE_REPO_ADR"/"$optional_image_repo_target":"$tag  #Create image + tag for optional image repo - pushed later if needed
851         else
852                 export "${2}_SOURCE"=""
853                 export "${2}_TARGET"=""
854         fi
855 }
856
857 # Check if app uses image included in this test run
858 # Returns 0 if image is included, 1 if not
859 __check_included_image() {
860         for im in $INCLUDED_IMAGES; do
861                 if [ "$1" == "$im" ]; then
862                         return 0
863                 fi
864         done
865         return 1
866 }
867
868 # Check if app uses a project image
869 # Returns 0 if image is included, 1 if not
870 __check_project_image() {
871         for im in $PROJECT_IMAGES; do
872                 if [ "$1" == "$im" ]; then
873                         return 0
874                 fi
875         done
876         return 1
877 }
878
879 # Check if app uses image built by the test script
880 # Returns 0 if image is included, 1 if not
881 __check_image_local_build() {
882         for im in $LOCAL_IMAGE_BUILD; do
883                 if [ "$1" == "$im" ]; then
884                         return 0
885                 fi
886         done
887         return 1
888 }
889
890 # Check if app image is conditionally ignored in this test run
891 # Returns 0 if image is conditionally ignored, 1 if not
892 __check_ignore_image() {
893         for im in $CONDITIONALLY_IGNORED_IMAGES; do
894                 if [ "$1" == "$im" ]; then
895                         return 0
896                 fi
897         done
898         return 1
899 }
900
901 # Removed image from included list of included images
902 # Used when an image is marked as conditionally ignored
903 __remove_included_image() {
904         tmp_img_rem_list=""
905         for im in $INCLUDED_IMAGES; do
906                 if [ "$1" != "$im" ]; then
907                         tmp_img_rem_list=$tmp_img_rem_list" "$im
908                 fi
909         done
910         INCLUDED_IMAGES=$tmp_img_rem_list
911         return 0
912 }
913
914 # Check if app is included in the prestarted set of apps
915 # Returns 0 if image is included, 1 if not
916 __check_prestarted_image() {
917         for im in $KUBE_PRESTARTED_IMAGES; do
918                 if [ "$1" == "$im" ]; then
919                         return 0
920                 fi
921         done
922         return 1
923 }
924
925 # Check if an app shall use a local image, based on the cmd parameters
926 __check_image_local_override() {
927         for im in $USE_LOCAL_IMAGES; do
928                 if [ "$1" == "$im" ]; then
929                         return 1
930                 fi
931         done
932         return 0
933 }
934
935 # Check if app uses image override
936 # Returns the image/tag suffix LOCAL for local image or REMOTE/REMOTE_RELEASE/REMOTE_SNAPSHOT for staging/release/snapshot image
937 __check_image_override() {
938
939         for im in $ORAN_IMAGES_APP_NAMES; do
940                 if [ "$1" == "$im" ]; then
941                         echo "REMOTE_RELEASE_ORAN"
942                         return 0
943                 fi
944         done
945
946         for im in $ONAP_IMAGES_APP_NAMES; do
947                 if [ "$1" == "$im" ]; then
948                         echo "REMOTE_RELEASE_ONAP"
949                         return 0
950                 fi
951         done
952
953         found=0
954         for im in $PROJECT_IMAGES_APP_NAMES; do
955                 if [ "$1" == "$im" ]; then
956                         found=1
957                 fi
958         done
959
960         if [ $found -eq 0 ]; then
961                 echo "REMOTE_PROXY"
962                 return 0
963         fi
964
965         suffix=""
966         if [ $IMAGE_CATEGORY == "RELEASE" ]; then
967                 suffix="REMOTE_RELEASE"
968         fi
969         if [ $IMAGE_CATEGORY == "DEV" ]; then
970                 suffix="REMOTE"
971         fi
972         CTR=0
973         for im in $USE_STAGING_IMAGES; do
974                 if [ "$1" == "$im" ]; then
975                         suffix="REMOTE"
976                         ((CTR++))
977                 fi
978         done
979         for im in $USE_RELEASE_IMAGES; do
980                 if [ "$1" == "$im" ]; then
981                         suffix="REMOTE_RELEASE"
982                         ((CTR++))
983                 fi
984         done
985         for im in $USE_SNAPSHOT_IMAGES; do
986                 if [ "$1" == "$im" ]; then
987                         suffix="REMOTE_SNAPSHOT"
988                         ((CTR++))
989                 fi
990         done
991         for im in $USE_LOCAL_IMAGES; do
992                 if [ "$1" == "$im" ]; then
993                         suffix="LOCAL"
994                         ((CTR++))
995                 fi
996         done
997         echo $suffix
998         if [ $CTR -gt 1 ]; then
999                 exit 1
1000         fi
1001         return 0
1002 }
1003
1004 # Function to re-tag and image and push to another image repo
1005 __retag_and_push_image() {
1006         if [ ! -z "$IMAGE_REPO_ADR" ]; then
1007                 source_image="${!1}"
1008                 trg_var_name=$1_"TARGET" # This var is created in func __check_and_create_image_var
1009                 target_image="${!trg_var_name}"
1010
1011                 if [ -z $target_image ]; then
1012                         return 0  # Image with no target shall not be pushed
1013                 fi
1014
1015                 echo -ne "  Attempt to re-tag image to: ${BOLD}${target_image}${EBOLD}${SAMELINE}"
1016                 tmp=$(docker image tag $source_image ${target_image} )
1017                 if [ $? -ne 0 ]; then
1018                         docker stop $tmp &> ./tmp/.dockererr
1019                         ((IMAGE_ERR++))
1020                         echo ""
1021                         echo -e "  Attempt to re-tag image to: ${BOLD}${target_image}${EBOLD} - ${RED}Failed${ERED}"
1022                         cat ./tmp/.dockererr
1023                         return 1
1024                 else
1025                         echo -e "  Attempt to re-tag image to: ${BOLD}${target_image}${EBOLD} - ${GREEN}OK${EGREEN}"
1026                 fi
1027                 echo -ne "  Attempt to push re-tagged image: ${BOLD}${target_image}${EBOLD}${SAMELINE}"
1028                 tmp=$(docker push ${target_image} )
1029                 if [ $? -ne 0 ]; then
1030                         docker stop $tmp &> ./tmp/.dockererr
1031                         ((IMAGE_ERR++))
1032                         echo ""
1033                         echo -e "  Attempt to push re-tagged image: ${BOLD}${target_image}${EBOLD} - ${RED}Failed${ERED}"
1034                         cat ./tmp/.dockererr
1035                         return 1
1036                 else
1037                         echo -e "  Attempt to push re-tagged image: ${BOLD}${target_image}${EBOLD} - ${GREEN}OK${EGREEN}"
1038                 fi
1039                 export "${1}"=$target_image
1040         fi
1041         return 0
1042 }
1043
1044 #Function to check if image exist and stop+remove the container+pull new images as needed
1045 #args <script-start-arg> <descriptive-image-name> <container-base-name> <image-with-tag-var-name>
1046 __check_and_pull_image() {
1047
1048         source_image="${!4}"
1049
1050         echo -e " Checking $BOLD$2$EBOLD container(s) with basename: $BOLD$3$EBOLD using image: $BOLD$source_image$EBOLD"
1051         format_string="\"{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\""
1052         tmp_im=$(docker images --format $format_string $source_image)
1053
1054         if [ $1 == "local" ]; then
1055                 if [ -z "$tmp_im" ]; then
1056                         echo -e "  "$2" (local image): \033[1m"$source_image"\033[0m $RED does not exist in local registry, need to be built (or manually pulled)"$ERED
1057                         ((IMAGE_ERR++))
1058                         return 1
1059                 else
1060                         echo -e "  "$2" (local image): \033[1m"$source_image"\033[0m "$GREEN"OK"$EGREEN
1061                 fi
1062         elif [ $1 == "remote" ] || [ $1 == "remote-remove" ]; then
1063                 if [ $1 == "remote-remove" ]; then
1064                         if [ $RUNMODE == "DOCKER" ]; then
1065                                 echo -ne "  Attempt to stop and remove container(s), if running - ${SAMELINE}"
1066                                 tmp=$(docker ps -aq --filter name=${3} --filter network=${DOCKER_SIM_NWNAME})
1067                                 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
1068                                         docker stop $tmp &> ./tmp/.dockererr
1069                                         if [ $? -ne 0 ]; then
1070                                                 ((IMAGE_ERR++))
1071                                                 echo ""
1072                                                 echo -e $RED"  Container(s) could not be stopped - try manual stopping the container(s)"$ERED
1073                                                 cat ./tmp/.dockererr
1074                                                 return 1
1075                                         fi
1076                                 fi
1077                                 echo -ne "  Attempt to stop and remove container(s), if running - "$GREEN"stopped"$EGREEN"${SAMELINE}"
1078                                 tmp=$(docker ps -aq --filter name=${3} --filter network=${DOCKER_SIM_NWNAME}) &> /dev/null
1079                                 if [ $? -eq 0 ] && [ ! -z "$tmp" ]; then
1080                                         docker rm $tmp &> ./tmp/.dockererr
1081                                         if [ $? -ne 0 ]; then
1082                                                 ((IMAGE_ERR++))
1083                                                 echo ""
1084                                                 echo -e $RED"  Container(s) could not be removed - try manual removal of the container(s)"$ERED
1085                                                 cat ./tmp/.dockererr
1086                                                 return 1
1087                                         fi
1088                                 fi
1089                                 echo -e "  Attempt to stop and remove container(s), if running - "$GREEN"stopped removed"$EGREEN
1090                                 tmp_im=""
1091                         else
1092                                 tmp_im=""
1093                         fi
1094                 fi
1095                 if [ -z "$tmp_im" ]; then
1096                         echo -ne "  Pulling image${SAMELINE}"
1097                         out=$(docker pull $source_image)
1098                         if [ $? -ne 0 ]; then
1099                                 echo ""
1100                                 echo -e "  Pulling image -$RED could not be pulled"$ERED
1101                                 ((IMAGE_ERR++))
1102                                 echo $out > ./tmp/.dockererr
1103                                 echo $out
1104                                 return 1
1105                         fi
1106                         echo $out > ./tmp/.dockererr
1107                         if [[ $out == *"up to date"* ]]; then
1108                                 echo -e "  Pulling image -$GREEN Image is up to date $EGREEN"
1109                         elif [[ $out == *"Downloaded newer image"* ]]; then
1110                                 echo -e "  Pulling image -$GREEN Newer image pulled $EGREEN"
1111                         else
1112                                 echo -e "  Pulling image -$GREEN Pulled $EGREEN"
1113                         fi
1114                 else
1115                         echo -e "  Pulling image -$GREEN OK $EGREEN(exists in local repository)"
1116                 fi
1117         fi
1118
1119         __retag_and_push_image $4
1120
1121         return $?
1122 }
1123
1124 setup_testenvironment() {
1125         # Check that image env setting are available
1126         echo ""
1127
1128         # Image var setup for all project images included in the test
1129         for imagename in $APP_SHORT_NAMES; do
1130                 __check_included_image $imagename
1131                 incl=$?
1132                 __check_project_image $imagename
1133                 proj=$?
1134                 if [ $incl -eq 0 ]; then
1135                         if [ $proj -eq 0 ]; then
1136                                 IMAGE_SUFFIX=$(__check_image_override $imagename)
1137                                 if [ $? -ne 0 ]; then
1138                                         echo -e $RED"Image setting from cmd line not consistent for $imagename."$ERED
1139                                         ((IMAGE_ERR++))
1140                                 fi
1141                         else
1142                                 IMAGE_SUFFIX="none"
1143                         fi
1144                         # A function name is created from the app short name
1145                         # for example app short name 'ECS' -> produce the function
1146                         # name __ECS_imagesetup
1147                         # This function is called and is expected to exist in the imported
1148                         # file for the ecs test functions
1149                         # The resulting function impl will call '__check_and_create_image_var' function
1150                         # with appropriate parameters
1151                         # If the image suffix is none, then the component decides the suffix
1152                         function_pointer="__"$imagename"_imagesetup"
1153                         $function_pointer $IMAGE_SUFFIX
1154                 fi
1155         done
1156
1157         #Errors in image setting - exit
1158         if [ $IMAGE_ERR -ne 0 ]; then
1159                 exit 1
1160         fi
1161
1162         #Print a tables of the image settings
1163         echo -e $BOLD"Images configured for start arg: "$START_ARG $EBOLD
1164         column -t -s $'\t' $image_list_file | indent1
1165
1166         echo ""
1167
1168         #Set the SIM_GROUP var
1169         echo -e $BOLD"Setting var to main dir of all container/simulator scripts"$EBOLD
1170         if [ -z "$SIM_GROUP" ]; then
1171                 SIM_GROUP=$AUTOTEST_HOME/../simulator-group
1172                 if [ ! -d  $SIM_GROUP ]; then
1173                         echo "Trying to set env var SIM_GROUP to dir 'simulator-group' in the nontrtric repo, but failed."
1174                         echo -e $RED"Please set the SIM_GROUP manually in the applicable $TEST_ENV_VAR_FILE"$ERED
1175                         exit 1
1176                 else
1177                         echo " SIM_GROUP auto set to: " $SIM_GROUP
1178                 fi
1179         elif [ $SIM_GROUP = *simulator_group ]; then
1180                 echo -e $RED"Env var SIM_GROUP does not seem to point to dir 'simulator-group' in the repo, check $TEST_ENV_VAR_FILE"$ERED
1181                 exit 1
1182         else
1183                 echo " SIM_GROUP env var already set to: " $SIM_GROUP
1184         fi
1185
1186         echo ""
1187
1188         #Temp var to check for image pull errors
1189         IMAGE_ERR=0
1190
1191         # The following sequence pull the configured images
1192
1193
1194         echo -e $BOLD"Pulling configured images, if needed"$EBOLD
1195         if [ ! -z "$IMAGE_REPO_ADR" ] && [ $IMAGE_REPO_POLICY == "local" ]; then
1196                 echo -e $YELLOW" Excluding all remote image check/pull when running with image repo: $IMAGE_REPO_ADR and image policy $IMAGE_REPO_POLICY"$EYELLOW
1197         else
1198                 for imagename in $APP_SHORT_NAMES; do
1199                         __check_included_image $imagename
1200                         incl=$?
1201                         __check_project_image $imagename
1202                         proj=$?
1203                         if [ $incl -eq 0 ]; then
1204                                 if [ $proj -eq 0 ]; then
1205                                         START_ARG_MOD=$START_ARG
1206                                         __check_image_local_override $imagename
1207                                         if [ $? -eq 1 ]; then
1208                                                 START_ARG_MOD="local"
1209                                         fi
1210                                 else
1211                                         START_ARG_MOD=$START_ARG
1212                                 fi
1213                                 __check_image_local_build $imagename
1214                                 #No pull of images built locally
1215                                 if [ $? -ne 0 ]; then
1216                                         # A function name is created from the app short name
1217                                         # for example app short name 'HTTPPROXY' -> produce the function
1218                                         # name __HTTPPROXY_imagesetup
1219                                         # This function is called and is expected to exist in the imported
1220                                         # file for the httpproxy test functions
1221                                         # The resulting function impl will call '__check_and_pull_image' function
1222                                         # with appropriate parameters
1223                                         function_pointer="__"$imagename"_imagepull"
1224                                         $function_pointer $START_ARG_MOD $START_ARG
1225                                 fi
1226                         else
1227                                 echo -e $YELLOW" Excluding $imagename image from image check/pull"$EYELLOW
1228                         fi
1229                 done
1230         fi
1231
1232         #Errors in image setting - exit
1233         if [ $IMAGE_ERR -ne 0 ]; then
1234                 echo ""
1235                 echo "#################################################################################################"
1236                 echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
1237                 echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
1238                 if [ $IMAGE_CATEGORY == "DEV" ]; then
1239                     echo ""
1240                         echo -e $RED"Note that SNAPSHOT and staging images may be purged from nexus after a certain period."$ERED
1241                         echo -e $RED"In addition, the image may not have been updated in the current release so no SNAPSHOT or staging image exists"$ERED
1242                         echo -e $RED"In these cases, switch to use a released image instead, use the flag '--use-release-image <App-short-name>'"$ERED
1243                         echo -e $RED"Use the 'App-short-name' for the applicable image from the above table: 'Images configured for start arg'."$ERED
1244                 fi
1245                 echo "#################################################################################################"
1246                 echo ""
1247                 exit 1
1248         fi
1249
1250         echo ""
1251
1252         echo -e $BOLD"Building images needed for test"$EBOLD
1253
1254         for imagename in $APP_SHORT_NAMES; do
1255                 cd $AUTOTEST_HOME #Always reset to orig dir
1256                 __check_image_local_build $imagename
1257                 if [ $? -eq 0 ]; then
1258                         __check_included_image $imagename
1259                         if [ $? -eq 0 ]; then
1260                                 # A function name is created from the app short name
1261                                 # for example app short name 'MR' -> produce the function
1262                                 # name __MR_imagebuild
1263                                 # This function is called and is expected to exist in the imported
1264                                 # file for the mr test functions
1265                                 # The resulting function impl shall build the imagee
1266                                 function_pointer="__"$imagename"_imagebuild"
1267                                 $function_pointer
1268
1269                         else
1270                                 echo -e $YELLOW" Excluding image for app $imagename from image build"$EYELLOW
1271                         fi
1272                 fi
1273         done
1274
1275         cd $AUTOTEST_HOME # Just to make sure...
1276
1277         echo ""
1278
1279         # Create a table of the images used in the script - from local repo
1280         echo -e $BOLD"Local docker registry images used in this test script"$EBOLD
1281
1282         docker_tmp_file=./tmp/.docker-images-table
1283         format_string="{{.Repository}}\\t{{.Tag}}\\t{{.CreatedSince}}\\t{{.Size}}\\t{{.CreatedAt}}"
1284         echo -e "Application\tRepository\tTag\tCreated since\tSize\tCreated at" > $docker_tmp_file
1285
1286         for imagename in $APP_SHORT_NAMES; do
1287                 __check_included_image $imagename
1288                 if [ $? -eq 0 ]; then
1289                         # Only print image data if image repo is null, or if image repo is set and image is local
1290                         print_image_data=0
1291                         if [ -z "$IMAGE_REPO_ADR" ]; then
1292                                 print_image_data=1
1293                         else
1294                                 __check_image_local_build $imagename
1295                                 if [ $? -eq 0 ]; then
1296                                         print_image_data=1
1297                                 fi
1298                         fi
1299                         if [ $print_image_data -eq 1 ]; then
1300                                 # A function name is created from the app short name
1301                                 # for example app short name 'MR' -> produce the function
1302                                 # name __MR_imagebuild
1303                                 # This function is called and is expected to exist in the imported
1304                                 # file for the mr test functions
1305                                 # The resulting function impl shall build the imagee
1306                                 function_pointer="__"$imagename"_image_data"
1307                                 $function_pointer "$format_string" $docker_tmp_file
1308                         fi
1309                 fi
1310         done
1311
1312         column -t -s $'\t' $docker_tmp_file | indent1
1313
1314         echo ""
1315
1316         if [ ! -z "$IMAGE_REPO_ADR" ]; then
1317
1318                 # Create a table of the images used in the script - from remote repo
1319                 echo -e $BOLD"Remote repo images used in this test script"$EBOLD
1320                 echo -e $YELLOW"-- Note: These image will be pulled when the container starts. Images not managed by the test engine --"$EYELLOW
1321
1322                 docker_tmp_file=./tmp/.docker-images-table
1323                 format_string="{{.Repository}}\\t{{.Tag}}"
1324                 echo -e "Application\tRepository\tTag" > $docker_tmp_file
1325
1326                 for imagename in $APP_SHORT_NAMES; do
1327                         __check_included_image $imagename
1328                         if [ $? -eq 0 ]; then
1329                                 # Only print image data if image repo is null, or if image repo is set and image is local
1330                                 __check_image_local_build $imagename
1331                                 if [ $? -ne 0 ]; then
1332                                         # A function name is created from the app short name
1333                                         # for example app short name 'MR' -> produce the function
1334                                         # name __MR_imagebuild
1335                                         # This function is called and is expected to exist in the imported
1336                                         # file for the mr test functions
1337                                         # The resulting function impl shall build the imagee
1338                                         function_pointer="__"$imagename"_image_data"
1339                                         $function_pointer "$format_string" $docker_tmp_file
1340                                 fi
1341                         fi
1342                 done
1343
1344                 column -t -s $'\t' $docker_tmp_file | indent1
1345
1346                 echo ""
1347         fi
1348
1349         if [ $RUNMODE == "KUBE" ]; then
1350
1351                 echo "================================================================================="
1352                 echo "================================================================================="
1353
1354                 if [ -z "$IMAGE_REPO_ADR" ]; then
1355                         echo -e $YELLOW" The image pull policy is set to 'Never' - assuming a local image repo is available for all images"$EYELLOW
1356                         echo -e " This setting only works on single node clusters on the local machine"
1357                         echo -e " It does not work with multi-node clusters or remote clusters. "
1358                         export KUBE_IMAGE_PULL_POLICY="Never"
1359                 else
1360                         echo -e $YELLOW" The image pull policy is set to 'Always'"$EYELLOW
1361                         echo -e " This setting work on local clusters, multi-node clusters and remote cluster. "
1362                         echo -e " Only locally built images are managed. Remote images are always pulled from remote repos"
1363                         echo -e " Pulling remote snapshot or staging images my in some case result in pulling newer image versions outside the control of the test engine"
1364                         export KUBE_IMAGE_PULL_POLICY="Always"
1365                 fi
1366                 CLUSTER_IP=$(kubectl config view -o jsonpath={.clusters[0].cluster.server} | awk -F[/:] '{print $4}')
1367                 echo -e $YELLOW" The cluster hostname/ip is: $CLUSTER_IP"$EYELLOW
1368
1369                 echo "================================================================================="
1370                 echo "================================================================================="
1371                 echo ""
1372         fi
1373
1374         echo -e $BOLD"======================================================="$EBOLD
1375         echo -e $BOLD"== Common test setup completed -  test script begins =="$EBOLD
1376         echo -e $BOLD"======================================================="$EBOLD
1377         echo ""
1378
1379 }
1380
1381 # Function to print the test result, shall be the last cmd in a test script
1382 # args: -
1383 # (Function for test scripts)
1384 print_result() {
1385
1386         TCTEST_END=$SECONDS
1387         duration=$((TCTEST_END-TCTEST_START))
1388
1389         echo "-------------------------------------------------------------------------------------------------"
1390         echo "-------------------------------------     Test case: "$ATC
1391         echo "-------------------------------------     Ended:     "$(date)
1392         echo "-------------------------------------------------------------------------------------------------"
1393         echo "-- Description: "$TC_ONELINE_DESCR
1394         echo "-- Execution time: " $duration " seconds"
1395         echo "-- Used env file: "$TEST_ENV_VAR_FILE
1396         echo "-------------------------------------------------------------------------------------------------"
1397         echo "-------------------------------------     RESULTS"
1398         echo ""
1399
1400
1401         if [ $RES_DEVIATION -gt 0 ]; then
1402                 echo "Test case deviations"
1403                 echo "===================================="
1404                 cat $DEVIATION_FILE
1405         fi
1406         echo ""
1407         echo "Timer measurement in the test script"
1408         echo "===================================="
1409         column -t -s $'\t' $TIMER_MEASUREMENTS
1410         echo ""
1411
1412         total=$((RES_PASS+RES_FAIL))
1413         if [ $RES_TEST -eq 0 ]; then
1414                 echo -e "\033[1mNo tests seem to have been executed. Check the script....\033[0m"
1415                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
1416                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
1417                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
1418                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
1419         elif [ $total != $RES_TEST ]; then
1420                 echo -e "\033[1mTotal number of tests does not match the sum of passed and failed tests. Check the script....\033[0m"
1421                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
1422                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
1423                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
1424                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
1425         elif [ $RES_CONF_FAIL -ne 0 ]; then
1426                 echo -e "\033[1mOne or more configurations has failed. Check the script log....\033[0m"
1427                 echo -e "\033[31m\033[1m ___  ___ ___ ___ ___ _____   ___ _   ___ _   _   _ ___ ___ \033[0m"
1428                 echo -e "\033[31m\033[1m/ __|/ __| _ \_ _| _ \_   _| | __/_\ |_ _| | | | | | _ \ __|\033[0m"
1429                 echo -e "\033[31m\033[1m\__ \ (__|   /| ||  _/ | |   | _/ _ \ | || |_| |_| |   / _| \033[0m"
1430                 echo -e "\033[31m\033[1m|___/\___|_|_\___|_|   |_|   |_/_/ \_\___|____\___/|_|_\___|\033[0m"
1431         elif [ $RES_PASS = $RES_TEST ]; then
1432                 echo -e "All tests \033[32m\033[1mPASS\033[0m"
1433                 echo -e "\033[32m\033[1m  ___  _   ___ ___ \033[0m"
1434                 echo -e "\033[32m\033[1m | _ \/_\ / __/ __| \033[0m"
1435                 echo -e "\033[32m\033[1m |  _/ _ \\__ \__ \\ \033[0m"
1436                 echo -e "\033[32m\033[1m |_|/_/ \_\___/___/ \033[0m"
1437                 echo ""
1438
1439                 # Update test suite counter
1440                 if [ -f .tmp_tcsuite_pass_ctr ]; then
1441                         tmpval=$(< .tmp_tcsuite_pass_ctr)
1442                         ((tmpval++))
1443                         echo $tmpval > .tmp_tcsuite_pass_ctr
1444                 fi
1445                 if [ -f .tmp_tcsuite_pass ]; then
1446                         echo " - "$ATC " -- "$TC_ONELINE_DESCR"  Execution time: "$duration" seconds" >> .tmp_tcsuite_pass
1447                 fi
1448                 #Create file with OK exit code
1449                 echo "0" > "$AUTOTEST_HOME/.result$ATC.txt"
1450         else
1451                 echo -e "One or more tests with status  \033[31m\033[1mFAIL\033[0m "
1452                 echo -e "\033[31m\033[1m  ___ _   ___ _    \033[0m"
1453                 echo -e "\033[31m\033[1m | __/_\ |_ _| |   \033[0m"
1454                 echo -e "\033[31m\033[1m | _/ _ \ | || |__ \033[0m"
1455                 echo -e "\033[31m\033[1m |_/_/ \_\___|____|\033[0m"
1456                 echo ""
1457                 # Update test suite counter
1458                 if [ -f .tmp_tcsuite_fail_ctr ]; then
1459                         tmpval=$(< .tmp_tcsuite_fail_ctr)
1460                         ((tmpval++))
1461                         echo $tmpval > .tmp_tcsuite_fail_ctr
1462                 fi
1463                 if [ -f .tmp_tcsuite_fail ]; then
1464                         echo " - "$ATC " -- "$TC_ONELINE_DESCR"  Execution time: "$duration" seconds" >> .tmp_tcsuite_fail
1465                 fi
1466         fi
1467
1468         echo "++++ Number of tests:          "$RES_TEST
1469         echo "++++ Number of passed tests:   "$RES_PASS
1470         echo "++++ Number of failed tests:   "$RES_FAIL
1471         echo ""
1472         echo "++++ Number of failed configs: "$RES_CONF_FAIL
1473         echo ""
1474         echo "++++ Number of test case deviations: "$RES_DEVIATION
1475         echo ""
1476         echo "-------------------------------------     Test case complete    ---------------------------------"
1477         echo "-------------------------------------------------------------------------------------------------"
1478         echo ""
1479 }
1480
1481 #####################################################################
1482 ###### Functions for start, configuring, stoping, cleaning etc ######
1483 #####################################################################
1484
1485 # Start timer for time measurement
1486 # args - (any args will be printed though)
1487 start_timer() {
1488         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
1489         TC_TIMER=$SECONDS
1490         echo " Timer started: $(date)"
1491 }
1492
1493 # Print the value of the time (in seconds)
1494 # args - <timer message to print>  -  timer value and message will be printed both on screen
1495 #                                     and in the timer measurement report
1496 print_timer() {
1497         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
1498         if [ $# -lt 1 ]; then
1499                 ((RES_CONF_FAIL++))
1500         __print_err "need 1 or more args,  <timer message to print>" $@
1501                 exit 1
1502         fi
1503         duration=$(($SECONDS-$TC_TIMER))
1504         if [ $duration -eq 0 ]; then
1505                 duration="<1 second"
1506         else
1507                 duration=$duration" seconds"
1508         fi
1509         echo " Timer duration :" $duration
1510
1511         echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
1512 }
1513
1514 # Print the value of the time (in seconds) and reset the timer
1515 # args - <timer message to print>  -  timer value and message will be printed both on screen
1516 #                                     and in the timer measurement report
1517 print_and_reset_timer() {
1518         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
1519         if [ $# -lt 1 ]; then
1520                 ((RES_CONF_FAIL++))
1521         __print_err "need 1 or more args,  <timer message to print>" $@
1522                 exit 1
1523         fi
1524         duration=$(($SECONDS-$TC_TIMER))" seconds"
1525         if [ $duration -eq 0 ]; then
1526                 duration="<1 second"
1527         else
1528                 duration=$duration" seconds"
1529         fi
1530         echo " Timer duration :" $duration
1531         TC_TIMER=$SECONDS
1532         echo " Timer reset"
1533
1534         echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
1535
1536 }
1537 # Print info about a deviations from intended tests
1538 # Each deviation counted is also printed in the testreport
1539 # args <deviation message to print>
1540 deviation() {
1541         echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
1542         if [ $# -lt 1 ]; then
1543                 ((RES_CONF_FAIL++))
1544                 __print_err "need 1 or more args,  <deviation message to print>" $@
1545                 exit 1
1546         fi
1547         ((RES_DEVIATION++))
1548         echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
1549         echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
1550         __print_current_stats
1551         echo ""
1552 }
1553
1554 # Stop at first FAIL test case and take all logs - only for debugging/trouble shooting
1555 __check_stop_at_error() {
1556         if [ $STOP_AT_ERROR -eq 1 ]; then
1557                 echo -e $RED"Test script configured to stop at first FAIL, taking all logs and stops"$ERED
1558                 store_logs "STOP_AT_ERROR"
1559                 exit 1
1560         fi
1561         return 0
1562 }
1563
1564 # Stop and remove all containers
1565 # args: -
1566 # (Not for test scripts)
1567 __clean_containers() {
1568
1569         echo -e $BOLD"Docker clean and stopping and removing all running containers, by container name"$EBOLD
1570
1571         #Create empty file
1572         running_contr_file="./tmp/running_contr.txt"
1573         > $running_contr_file
1574
1575         # Get list of all containers started by the test script
1576         for imagename in $APP_SHORT_NAMES; do
1577                 docker ps -a --filter "label=nrttest_app=$imagename"  --filter "network=$DOCKER_SIM_NWNAME" --format ' {{.Label "nrttest_dp"}}\n{{.Label "nrttest_app"}}\n{{.Names}}' >> $running_contr_file
1578         done
1579
1580         tab_heading1="App display name"
1581         tab_heading2="App short name"
1582         tab_heading3="Container name"
1583
1584         tab_heading1_len=${#tab_heading1}
1585         tab_heading2_len=${#tab_heading2}
1586         tab_heading3_len=${#tab_heading3}
1587         cntr=0
1588         #Calc field lengths of each item in the list of containers
1589         while read p; do
1590                 if (( $cntr % 3 == 0 ));then
1591                         if [ ${#p} -gt $tab_heading1_len ]; then
1592                                 tab_heading1_len=${#p}
1593                         fi
1594                 fi
1595                 if (( $cntr % 3 == 1));then
1596                         if [ ${#p} -gt $tab_heading2_len ]; then
1597                                 tab_heading2_len=${#p}
1598                         fi
1599                 fi
1600                 if (( $cntr % 3 == 2));then
1601                         if [ ${#p} -gt $tab_heading3_len ]; then
1602                                 tab_heading3_len=${#p}
1603                         fi
1604                 fi
1605                 let cntr=cntr+1
1606         done <$running_contr_file
1607
1608         let tab_heading1_len=tab_heading1_len+2
1609         while (( ${#tab_heading1} < $tab_heading1_len)); do
1610                 tab_heading1="$tab_heading1"" "
1611         done
1612
1613         let tab_heading2_len=tab_heading2_len+2
1614         while (( ${#tab_heading2} < $tab_heading2_len)); do
1615                 tab_heading2="$tab_heading2"" "
1616         done
1617
1618         let tab_heading3_len=tab_heading3_len+2
1619         while (( ${#tab_heading3} < $tab_heading3_len)); do
1620                 tab_heading3="$tab_heading3"" "
1621         done
1622
1623         echo " $tab_heading1$tab_heading2$tab_heading3"" Actions"
1624         cntr=0
1625         while read p; do
1626                 if (( $cntr % 3 == 0 ));then
1627                         row=""
1628                         heading=$p
1629                         heading_len=$tab_heading1_len
1630                 fi
1631                 if (( $cntr % 3 == 1));then
1632                         heading=$p
1633                         heading_len=$tab_heading2_len
1634                 fi
1635                 if (( $cntr % 3 == 2));then
1636                         contr=$p
1637                         heading=$p
1638                         heading_len=$tab_heading3_len
1639                 fi
1640                 while (( ${#heading} < $heading_len)); do
1641                         heading="$heading"" "
1642                 done
1643                 row=$row$heading
1644                 if (( $cntr % 3 == 2));then
1645                         echo -ne $row$SAMELINE
1646                         echo -ne " $row ${GREEN}stopping...${EGREEN}${SAMELINE}"
1647                         docker stop $(docker ps -qa --filter name=${contr} --filter network=$DOCKER_SIM_NWNAME) &> /dev/null
1648                         echo -ne " $row ${GREEN}stopped removing...${EGREEN}${SAMELINE}"
1649                         docker rm --force $(docker ps -qa --filter name=${contr} --filter network=$DOCKER_SIM_NWNAME) &> /dev/null
1650                         echo -e  " $row ${GREEN}stopped removed     ${EGREEN}"
1651                 fi
1652                 let cntr=cntr+1
1653         done <$running_contr_file
1654
1655         echo ""
1656
1657         echo -e $BOLD" Removing docker network"$EBOLD
1658         TMP=$(docker network ls -q --filter name=$DOCKER_SIM_NWNAME)
1659         if [ "$TMP" ==  $DOCKER_SIM_NWNAME ]; then
1660                 docker network rm $DOCKER_SIM_NWNAME | indent2
1661                 if [ $? -ne 0 ];  then
1662                         echo -e $RED" Cannot remove docker network. Manually remove or disconnect containers from $DOCKER_SIM_NWNAME"$ERED
1663                         exit 1
1664                 fi
1665         fi
1666         echo -e "$GREEN  Done$EGREEN"
1667
1668         echo -e $BOLD" Removing all unused docker neworks"$EBOLD
1669         docker network prune --force | indent2
1670         echo -e "$GREEN  Done$EGREEN"
1671
1672         echo -e $BOLD" Removing all unused docker volumes"$EBOLD
1673         docker volume prune --force | indent2
1674         echo -e "$GREEN  Done$EGREEN"
1675
1676         echo -e $BOLD" Removing all dangling/untagged docker images"$EBOLD
1677     docker rmi --force $(docker images -q -f dangling=true) &> /dev/null
1678         echo -e "$GREEN  Done$EGREEN"
1679         echo ""
1680
1681         CONTRS=$(docker ps | awk '$1 != "CONTAINER" { n++ }; END { print n+0 }')
1682         if [ $? -eq 0 ]; then
1683                 if [ $CONTRS -ne 0 ]; then
1684                         echo -e $RED"Containers running, may cause distubance to the test case"$ERED
1685                         docker ps -a | indent1
1686                         echo ""
1687                 fi
1688         fi
1689 }
1690
1691 ###################################
1692 ### Functions for kube management
1693 ###################################
1694
1695 # Get resource type for scaling
1696 # args: <resource-name> <namespace>
1697 __kube_get_resource_type() {
1698         kubectl get deployment $1 -n $2 1> /dev/null 2> ./tmp/kubeerr
1699         if [ $? -eq 0 ]; then
1700                 echo "deployment"
1701                 return 0
1702         fi
1703         kubectl get sts $1 -n $2 1> /dev/null 2> ./tmp/kubeerr
1704         if [ $? -eq 0 ]; then
1705                 echo "sts"
1706                 return 0
1707         fi
1708         echo "unknown-resource-type"
1709         return 1
1710 }
1711
1712 # Scale a kube resource to a specific count
1713 # args: <resource-type> <resource-name> <namespace> <target-count>
1714 # (Not for test scripts)
1715 __kube_scale() {
1716         echo -ne "  Setting $1 $2 replicas=$4 in namespace $3"$SAMELINE
1717         kubectl scale  $1 $2  -n $3 --replicas=$4 1> /dev/null 2> ./tmp/kubeerr
1718         if [ $? -ne 0 ]; then
1719                 echo -e "  Setting $1 $2 replicas=$4 in namespace $3 $RED Failed $ERED"
1720                 ((RES_CONF_FAIL++))
1721                 echo "  Message: $(<./tmp/kubeerr)"
1722                 return 1
1723         else
1724                 echo -e "  Setting $1 $2 replicas=$4 in namespace $3 $GREEN OK $EGREEN"
1725         fi
1726
1727         TSTART=$SECONDS
1728
1729         for i in {1..500}; do
1730                 count=$(kubectl get $1/$2  -n $3 -o jsonpath='{.status.replicas}' 2> /dev/null)
1731                 retcode=$?
1732                 if [ -z "$count" ]; then
1733                         #No value is sometimes returned for some reason, in case the resource has replica 0
1734                         count=0
1735                 fi
1736                 if [ $retcode -ne 0 ]; then
1737                         echo -e "$RED  Cannot fetch current replica count for $1 $2 in namespace $3 $ERED"
1738                         ((RES_CONF_FAIL++))
1739                         return 1
1740                 fi
1741                 #echo ""
1742                 if [ $count -ne $4 ]; then
1743                         echo -ne "  Waiting for $1 $2 replicas=$4 in namespace $3. Replicas=$count after $(($SECONDS-$TSTART)) seconds $SAMELINE"
1744                         sleep $i
1745                 else
1746                         echo -e "  Waiting for $1 $2 replicas=$4 in namespace $3. Replicas=$count after $(($SECONDS-$TSTART)) seconds"
1747                         echo -e "  Replicas=$4 after $(($SECONDS-$TSTART)) seconds $GREEN OK $EGREEN"
1748                         echo ""
1749                         return 0
1750                 fi
1751         done
1752         echo ""
1753         echo -e "$RED  Replica count did not reach target replicas=$4. Failed with replicas=$count $ERED"
1754         ((RES_CONF_FAIL++))
1755         return 0
1756 }
1757
1758 # Scale all kube resource sets to 0 in a namespace for resources having a certain lable and label-id
1759 # This function does not wait for the resource to reach 0
1760 # args: <namespace> <label-name> <label-id>
1761 # (Not for test scripts)
1762 __kube_scale_all_resources() {
1763         namespace=$1
1764         labelname=$2
1765         labelid=$3
1766         resources="deployment replicaset statefulset"
1767         for restype in $resources; do
1768                 result=$(kubectl get $restype -n $namespace -o jsonpath='{.items[?(@.metadata.labels.'$labelname'=="'$labelid'")].metadata.name}')
1769                 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
1770                         deleted_resourcetypes=$deleted_resourcetypes" "$restype
1771                         for resid in $result; do
1772                                 echo -ne "  Ordered caling $restype $resid from namespace $namespace with label $labelname=$labelid to 0"$SAMELINE
1773                                 kubectl scale  $restype $resid  -n $namespace --replicas=0 1> /dev/null 2> ./tmp/kubeerr
1774                                 echo -e "  Ordered scaling $restype $resid from namespace $namespace with label $labelname=$labelid to 0 $GREEN OK $EGREEN"
1775                         done
1776                 fi
1777         done
1778 }
1779
1780 # Scale all kube resource sets to 0 in a namespace for resources having a certain lable and label-id
1781 # This function do wait for the resource to reach 0
1782 # args: <namespace> <label-name> <label-id>
1783 # (Not for test scripts)
1784 __kube_scale_and_wait_all_resources() {
1785         namespace=$1
1786         labelname=$2
1787         labelid=$3
1788         resources="deployment replicaset statefulset"
1789         scaled_all=1
1790         while [ $scaled_all -ne 0 ]; do
1791                 scaled_all=0
1792                 for restype in $resources; do
1793                         result=$(kubectl get $restype -n $namespace -o jsonpath='{.items[?(@.metadata.labels.'$labelname'=="'$labelid'")].metadata.name}')
1794                         if [ $? -eq 0 ] && [ ! -z "$result" ]; then
1795                                 for resid in $result; do
1796                                         echo -e "  Ordered scaling $restype $resid from namespace $namespace with label $labelname=$labelid to 0"
1797                                         kubectl scale  $restype $resid  -n $namespace --replicas=0 1> /dev/null 2> ./tmp/kubeerr
1798                                         count=1
1799                                         T_START=$SECONDS
1800                                         while [ $count -ne 0 ]; do
1801                                                 count=$(kubectl get $restype $resid  -n $namespace -o jsonpath='{.status.replicas}' 2> /dev/null)
1802                                                 echo -ne "  Scaling $restype $resid from namespace $namespace with label $labelname=$labelid to 0,count=$count"$SAMELINE
1803                                                 if [ $? -eq 0 ] && [ ! -z "$count" ]; then
1804                                                         sleep 0.5
1805                                                 else
1806                                                         count=0
1807                                                 fi
1808                                                 duration=$(($SECONDS-$T_START))
1809                                                 if [ $duration -gt 100 ]; then
1810                                                         #Forcring count 0, to avoid hanging for failed scaling
1811                                                         scaled_all=1
1812                                                         count=0
1813                                                 fi
1814                                         done
1815                                         echo -e "  Scaled $restype $resid from namespace $namespace with label $labelname=$labelid to 0,count=$count $GREEN OK $EGREEN"
1816                                 done
1817                         fi
1818                 done
1819         done
1820 }
1821
1822 # Remove all kube resources in a namespace for resources having a certain label and label-id
1823 # This function wait until the resources are gone. Scaling to 0 must have been ordered previously
1824 # args: <namespace> <label-name> <label-id>
1825 # (Not for test scripts)
1826 __kube_delete_all_resources() {
1827         namespace=$1
1828         labelname=$2
1829         labelid=$3
1830         resources="deployments replicaset statefulset services pods configmaps persistentvolumeclaims persistentvolumes"
1831         deleted_resourcetypes=""
1832         for restype in $resources; do
1833                 result=$(kubectl get $restype -n $namespace -o jsonpath='{.items[?(@.metadata.labels.'$labelname'=="'$labelid'")].metadata.name}')
1834                 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
1835                         deleted_resourcetypes=$deleted_resourcetypes" "$restype
1836                         for resid in $result; do
1837                                 if [ $restype == "replicaset" ] || [ $restype == "statefulset" ]; then
1838                                         count=1
1839                                         while [ $count -ne 0 ]; do
1840                                                 count=$(kubectl get $restype $resid  -n $namespace -o jsonpath='{.status.replicas}' 2> /dev/null)
1841                                                 echo -ne "  Scaling $restype $resid from namespace $namespace with label $labelname=$labelid to 0,count=$count"$SAMELINE
1842                                                 if [ $? -eq 0 ] && [ ! -z "$count" ]; then
1843                                                         sleep 0.5
1844                                                 else
1845                                                         count=0
1846                                                 fi
1847                                         done
1848                                         echo -e "  Scaled $restype $resid from namespace $namespace with label $labelname=$labelid to 0,count=$count $GREEN OK $EGREEN"
1849                                 fi
1850                                 echo -ne "  Deleting $restype $resid from namespace $namespace with label $labelname=$labelid "$SAMELINE
1851                                 kubectl delete $restype $resid -n $namespace 1> /dev/null 2> ./tmp/kubeerr
1852                                 if [ $? -eq 0 ]; then
1853                                         echo -e "  Deleted $restype $resid from namespace $namespace with label $labelname=$labelid $GREEN OK $EGREEN"
1854                                 else
1855                                         echo -e "  Deleted $restype $resid from namespace $namespace with label $labelname=$labelid $GREEN Does not exist - OK $EGREEN"
1856                                 fi
1857                                 #fi
1858                         done
1859                 fi
1860         done
1861         if [ ! -z "$deleted_resourcetypes" ]; then
1862                 for restype in $deleted_resources; do
1863                         echo -ne "  Waiting for $restype in namespace $namespace with label $labelname=$labelid to be deleted..."$SAMELINE
1864                         T_START=$SECONDS
1865                         result="dummy"
1866                         while [ ! -z "$result" ]; do
1867                                 sleep 0.5
1868                                 result=$(kubectl get $restype -n $namespace -o jsonpath='{.items[?(@.metadata.labels.'$labelname'=="'$labelid'")].metadata.name}')
1869                                 echo -ne "  Waiting for $restype in namespace $namespace with label $labelname=$labelid to be deleted...$(($SECONDS-$T_START)) seconds "$SAMELINE
1870                                 if [ -z "$result" ]; then
1871                                         echo -e " Waiting for $restype in namespace $namespace with label $labelname=$labelid to be deleted...$(($SECONDS-$T_START)) seconds $GREEN OK $EGREEN"
1872                                 elif [ $(($SECONDS-$T_START)) -gt 300 ]; then
1873                                         echo -e " Waiting for $restype in namespace $namespace with label $labelname=$labelid to be deleted...$(($SECONDS-$T_START)) seconds $RED Failed $ERED"
1874                                         result=""
1875                                 fi
1876                         done
1877                 done
1878         fi
1879 }
1880
1881 # Creates a namespace if it does not exists
1882 # args: <namespace>
1883 # (Not for test scripts)
1884 __kube_create_namespace() {
1885
1886         #Check if test namespace exists, if not create it
1887         kubectl get namespace $1 1> /dev/null 2> ./tmp/kubeerr
1888         if [ $? -ne 0 ]; then
1889                 echo -ne " Creating namespace "$1 $SAMELINE
1890                 kubectl create namespace $1 1> /dev/null 2> ./tmp/kubeerr
1891                 if [ $? -ne 0 ]; then
1892                         echo -e " Creating namespace $1 $RED$BOLD FAILED $EBOLD$ERED"
1893                         ((RES_CONF_FAIL++))
1894                         echo "  Message: $(<./tmp/kubeerr)"
1895                         return 1
1896                 else
1897                         echo -e " Creating namespace $1 $GREEN$BOLD OK $EBOLD$EGREEN"
1898                 fi
1899         else
1900                 echo -e " Creating namespace $1 $GREEN$BOLD Already exists, OK $EBOLD$EGREEN"
1901         fi
1902         return 0
1903 }
1904
1905 # Find the host ip of an app (using the service resource)
1906 # args: <app-name> <namespace>
1907 # (Not for test scripts)
1908 __kube_get_service_host() {
1909         if [ $# -ne 2 ]; then
1910                 ((RES_CONF_FAIL++))
1911         __print_err "need 2 args, <app-name> <namespace>" $@
1912                 exit 1
1913         fi
1914         for timeout in {1..60}; do
1915                 host=$(kubectl get svc $1  -n $2 -o jsonpath='{.spec.clusterIP}')
1916                 if [ $? -eq 0 ]; then
1917                         if [ ! -z "$host" ]; then
1918                                 echo $host
1919                                 return 0
1920                         fi
1921                 fi
1922                 sleep 0.5
1923         done
1924         ((RES_CONF_FAIL++))
1925         echo "host-not-found-fatal-error"
1926         return 1
1927 }
1928
1929 # Find the named port to an app (using the service resource)
1930 # args: <app-name> <namespace> <port-name>
1931 # (Not for test scripts)
1932 __kube_get_service_port() {
1933         if [ $# -ne 3 ]; then
1934                 ((RES_CONF_FAIL++))
1935         __print_err "need 3 args, <app-name> <namespace> <port-name>" $@
1936                 exit 1
1937         fi
1938
1939         for timeout in {1..60}; do
1940                 port=$(kubectl get svc $1  -n $2 -o jsonpath='{...ports[?(@.name=="'$3'")].port}')
1941                 if [ $? -eq 0 ]; then
1942                         if [ ! -z "$port" ]; then
1943                                 echo $port
1944                                 return 0
1945                         fi
1946                 fi
1947                 sleep 0.5
1948         done
1949         ((RES_CONF_FAIL++))
1950         echo "0"
1951         return 1
1952 }
1953
1954 # Find the named node port to an app (using the service resource)
1955 # args: <app-name> <namespace> <port-name>
1956 # (Not for test scripts)
1957 __kube_get_service_nodeport() {
1958         if [ $# -ne 3 ]; then
1959                 ((RES_CONF_FAIL++))
1960         __print_err "need 3 args, <app-name> <namespace> <port-name>" $@
1961                 exit 1
1962         fi
1963
1964         for timeout in {1..60}; do
1965                 port=$(kubectl get svc $1  -n $2 -o jsonpath='{...ports[?(@.name=="'$3'")].nodePort}')
1966                 if [ $? -eq 0 ]; then
1967                         if [ ! -z "$port" ]; then
1968                                 echo $port
1969                                 return 0
1970                         fi
1971                 fi
1972                 sleep 0.5
1973         done
1974         ((RES_CONF_FAIL++))
1975         echo "0"
1976         return 1
1977 }
1978
1979 # Create a kube resource from a yaml template
1980 # args: <resource-type> <resource-name> <template-yaml> <output-yaml>
1981 # (Not for test scripts)
1982 __kube_create_instance() {
1983         echo -ne " Creating $1 $2"$SAMELINE
1984         envsubst < $3 > $4
1985         kubectl apply -f $4 1> /dev/null 2> ./tmp/kubeerr
1986         if [ $? -ne 0 ]; then
1987                 ((RES_CONF_FAIL++))
1988                 echo -e " Creating $1 $2 $RED Failed $ERED"
1989                 echo "  Message: $(<./tmp/kubeerr)"
1990                 return 1
1991         else
1992                 echo -e " Creating $1 $2 $GREEN OK $EGREEN"
1993         fi
1994 }
1995
1996 # Function to create a configmap in kubernetes
1997 # args: <configmap-name> <namespace> <labelname> <labelid> <path-to-data-file> <path-to-output-yaml>
1998 # (Not for test scripts)
1999 __kube_create_configmap() {
2000         echo -ne " Creating configmap $1 "$SAMELINE
2001         envsubst < $5 > $5"_tmp"
2002         cp $5"_tmp" $5  #Need to copy back to orig file name since create configmap neeed the original file name
2003         kubectl create configmap $1  -n $2 --from-file=$5 --dry-run=client -o yaml > $6
2004         if [ $? -ne 0 ]; then
2005                 echo -e " Creating configmap $1 $RED Failed $ERED"
2006                 ((RES_CONF_FAIL++))
2007                 return 1
2008         fi
2009
2010         kubectl apply -f $6 1> /dev/null 2> ./tmp/kubeerr
2011         if [ $? -ne 0 ]; then
2012                 echo -e " Creating configmap $1 $RED Apply failed $ERED"
2013                 echo "  Message: $(<./tmp/kubeerr)"
2014                 ((RES_CONF_FAIL++))
2015                 return 1
2016         fi
2017         kubectl label configmap $1 -n $2 $3"="$4 --overwrite 1> /dev/null 2> ./tmp/kubeerr
2018         if [ $? -ne 0 ]; then
2019                 echo -e " Creating configmap $1 $RED Labeling failed $ERED"
2020                 echo "  Message: $(<./tmp/kubeerr)"
2021                 ((RES_CONF_FAIL++))
2022                 return 1
2023         fi
2024         # Log the resulting map
2025         kubectl get configmap $1 -n $2 -o yaml > $6
2026
2027         echo -e " Creating configmap $1 $GREEN OK $EGREEN"
2028         return 0
2029 }
2030
2031 # This function runs a kubectl cmd where a single output value is expected, for example get ip with jsonpath filter.
2032 # The function retries up to the timeout given in the cmd flag '--cluster-timeout'
2033 # args: <full kubectl cmd with parameters>
2034 # (Not for test scripts)
2035 __kube_cmd_with_timeout() {
2036         TS_TMP=$(($SECONDS+$CLUSTER_TIME_OUT))
2037
2038         while true; do
2039                 kube_cmd_result=$($@)
2040                 if [ $? -ne 0 ]; then
2041                         kube_cmd_result=""
2042                 fi
2043                 if [ $SECONDS -ge $TS_TMP ] || [ ! -z "$kube_cmd_result" ] ; then
2044                         echo $kube_cmd_result
2045                         return 0
2046                 fi
2047                 sleep 1
2048         done
2049 }
2050
2051 # This function starts a pod that cleans a the contents of a path mounted as a pvc
2052 # After this action the pod should terminate
2053 # This should only be executed when the pod owning the pvc is not running
2054 # args: <appname> <namespace> <pvc-name> <path-to remove>
2055 # (Not for test scripts)
2056 __kube_clean_pvc() {
2057
2058         export PVC_CLEANER_NAMESPACE=$2
2059         export PVC_CLEANER_CLAIMNAME=$3
2060         export PVC_CLEANER_RM_PATH=$4
2061         input_yaml=$SIM_GROUP"/pvc-cleaner/"pvc-cleaner.yaml
2062         output_yaml=$PWD/tmp/$2-pvc-cleaner.yaml
2063
2064         envsubst < $input_yaml > $output_yaml
2065
2066         kubectl delete -f $output_yaml 1> /dev/null 2> /dev/null   # Delete the previous terminated pod - if existing
2067
2068         __kube_create_instance pod pvc-cleaner $input_yaml $output_yaml
2069         if [ $? -ne 0 ]; then
2070                 echo $YELLOW" Could not clean pvc for app: $1 - persistent storage not clean - tests may not work"
2071                 return 1
2072         fi
2073
2074         term_ts=$(($SECONDS+30))
2075         while [ $term_ts -gt $SECONDS ]; do
2076                 pod_status=$(kubectl get pod pvc-cleaner -n $PVC_CLEANER_NAMESPACE --no-headers -o custom-columns=":status.phase")
2077                 if [ "$pod_status" == "Succeeded" ]; then
2078                         return 0
2079                 fi
2080         done
2081         return 1
2082 }
2083
2084 # This function scales or deletes all resources for app selected by the testcase.
2085 # args: -
2086 # (Not for test scripts)
2087 __clean_kube() {
2088         echo -e $BOLD"Initialize kube services//pods/statefulsets/replicaset to initial state"$EBOLD
2089
2090         # Scale prestarted or managed apps
2091         for imagename in $APP_SHORT_NAMES; do
2092                 # A function name is created from the app short name
2093                 # for example app short name 'RICMSIM' -> produce the function
2094                 # name __RICSIM_kube_scale_zero or __RICSIM_kube_scale_zero_and_wait
2095                 # This function is called and is expected to exist in the imported
2096                 # file for the ricsim test functions
2097                 # The resulting function impl shall scale the resources to 0
2098                 # For prestarted apps, the function waits until the resources are 0
2099                 # For included (not prestated) apps, the scaling is just ordered
2100                 __check_prestarted_image $imagename
2101                 if [ $? -eq 0 ]; then
2102                         function_pointer="__"$imagename"_kube_scale_zero_and_wait"
2103                         echo -e " Scaling all kube resources for app $BOLD $imagename $EBOLD to 0"
2104                         $function_pointer
2105                 else
2106                         __check_included_image $imagename
2107                         if [ $? -eq 0 ]; then
2108                                 function_pointer="__"$imagename"_kube_scale_zero"
2109                                 echo -e " Scaling all kube resources for app $BOLD $imagename $EBOLD to 0"
2110                                 $function_pointer
2111                         fi
2112                 fi
2113         done
2114
2115         # Delete managed apps
2116         for imagename in $APP_SHORT_NAMES; do
2117                 __check_included_image $imagename
2118                 if [ $? -eq 0 ]; then
2119                         __check_prestarted_image $imagename
2120                         if [ $? -ne 0 ]; then
2121                                 # A function name is created from the app short name
2122                                 # for example app short name 'RICMSIM' -> produce the function
2123                                 # name __RICSIM__kube_delete_all
2124                                 # This function is called and is expected to exist in the imported
2125                                 # file for the ricsim test functions
2126                                 # The resulting function impl shall delete all its resources
2127                                 function_pointer="__"$imagename"_kube_delete_all"
2128                                 echo -e " Deleting all kube resources for app $BOLD $imagename $EBOLD"
2129                                 $function_pointer
2130                         fi
2131                 fi
2132         done
2133
2134         echo ""
2135 }
2136
2137 # Function stop and remove all containers (docker) and services/deployments etc(kube)
2138 # args: -
2139 # Function for test script
2140 clean_environment() {
2141         if [ $RUNMODE == "KUBE" ]; then
2142                 __clean_kube
2143         else
2144                 __clean_containers
2145         fi
2146 }
2147
2148 # Function stop and remove all containers (docker) and services/deployments etc(kube) in the end of the test script, if the arg 'auto-clean' is given at test script start
2149 # args: -
2150 # (Function for test scripts)
2151 auto_clean_environment() {
2152         echo
2153         if [ "$AUTO_CLEAN" == "auto" ]; then
2154                 echo -e $BOLD"Initiating automatic cleaning of environment"$EBOLD
2155                 clean_environment
2156         fi
2157 }
2158
2159 # Function to sleep a test case for a numner of seconds. Prints the optional text args as info
2160 # args: <sleep-time-in-sec> [any-text-in-quotes-to-be-printed]
2161 # (Function for test scripts)
2162 sleep_wait() {
2163
2164         echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
2165         if [ $# -lt 1 ]; then
2166                 ((RES_CONF_FAIL++))
2167                 __print_err "need at least one arg, <sleep-time-in-sec> [any-text-to-printed]" $@
2168                 exit 1
2169         fi
2170         #echo "---- Sleep for " $1 " seconds ---- "$2
2171         start=$SECONDS
2172         duration=$((SECONDS-start))
2173         while [ $duration -lt $1 ]; do
2174                 echo -ne "  Slept for ${duration} seconds${SAMELINE}"
2175                 sleep 1
2176                 duration=$((SECONDS-start))
2177         done
2178         echo -ne "  Slept for ${duration} seconds${SAMELINE}"
2179         echo ""
2180 }
2181
2182 # Print error info for the call in the parent script (test case). Arg: <error-message-to-print>
2183 # Not to be called from the test script itself.
2184 __print_err() {
2185     echo -e $RED ${FUNCNAME[1]} " "$1" " ${BASH_SOURCE[2]} " line" ${BASH_LINENO[1]} $ERED
2186         if [ $# -gt 1 ]; then
2187                 echo -e $RED" Got: "${FUNCNAME[1]} ${@:2} $ERED
2188         fi
2189         ((RES_CONF_FAIL++))
2190 }
2191
2192 # Function to create the docker network for the test
2193 # Not to be called from the test script itself.
2194 __create_docker_network() {
2195         tmp=$(docker network ls --format={{.Name}} --filter name=$DOCKER_SIM_NWNAME)
2196         if [ $? -ne 0 ]; then
2197                 echo -e $RED" Could not check if docker network $DOCKER_SIM_NWNAME exists"$ERED
2198                 return 1
2199         fi
2200         if [ "$tmp" != $DOCKER_SIM_NWNAME ]; then
2201                 echo -e " Creating docker network:$BOLD $DOCKER_SIM_NWNAME $EBOLD"
2202                 docker network create $DOCKER_SIM_NWNAME | indent2
2203                 if [ $? -ne 0 ]; then
2204                         echo -e $RED" Could not create docker network $DOCKER_SIM_NWNAME"$ERED
2205                         return 1
2206                 else
2207                         echo -e "$GREEN  Done$EGREEN"
2208                 fi
2209         else
2210                 echo -e " Docker network $DOCKER_SIM_NWNAME already exists$GREEN OK $EGREEN"
2211         fi
2212 }
2213
2214 # Function to start container with docker-compose and wait until all are in state running.
2215 # If the <docker-compose-file> is empty, the default 'docker-compose.yml' is assumed.
2216 #args: <docker-compose-dir> <docker-compose-file> <docker-compose-arg>|NODOCKERARGS <count> <app-name>+
2217 # (Not for test scripts)
2218 __start_container() {
2219
2220         if [ $# -lt 5 ]; then
2221                 ((RES_CONF_FAIL++))
2222         __print_err "need 5 or more args, <docker-compose-dir> <docker-compose-file> <docker-compose-arg>|NODOCKERARGS <count> <app-name>+" $@
2223                 exit 1
2224         fi
2225
2226         __create_docker_network
2227
2228         curdir=$PWD
2229         cd $SIM_GROUP
2230         compose_dir=$1
2231         cd $1
2232         shift
2233         compose_file=$1
2234         if [ -z "$compose_file" ]; then
2235                 compose_file="docker-compose.yml"
2236         fi
2237         shift
2238         compose_args=$1
2239         shift
2240         appcount=$1
2241         shift
2242
2243         if [ "$compose_args" == "NODOCKERARGS" ]; then
2244                 docker-compose -f $compose_file up -d &> .dockererr
2245                 if [ $? -ne 0 ]; then
2246                         echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
2247                         cat .dockererr
2248                         echo -e $RED"Stopping script...."$ERED
2249                         exit 1
2250                 fi
2251         else
2252                 docker-compose -f $compose_file up -d $compose_args &> .dockererr
2253                 if [ $? -ne 0 ]; then
2254                         echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
2255                         cat .dockererr
2256                         echo -e $RED"Stopping script...."$ERED
2257                         exit 1
2258                 fi
2259         fi
2260
2261         cd $curdir
2262
2263         appindex=0
2264         while [ $appindex -lt $appcount ]; do
2265                 appname=$1
2266                 shift
2267                 app_started=0
2268                 for i in {1..10}; do
2269                         if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
2270                                         echo -e " Container $BOLD${appname}$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
2271                                         app_started=1
2272                                         break
2273                                 else
2274                                         sleep $i
2275                         fi
2276                 done
2277                 if [ $app_started -eq 0 ]; then
2278                         ((RES_CONF_FAIL++))
2279                         echo ""
2280                         echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
2281                         echo -e $RED" Stopping script..."$ERED
2282                         exit 1
2283                 fi
2284                 let appindex=appindex+1
2285         done
2286         return 0
2287 }
2288
2289 # Function to check if container/service is responding to http/https
2290 # args: <container-name>|<service-name> url
2291 # (Not for test scripts)
2292 __check_service_start() {
2293
2294         if [ $# -ne 2 ]; then
2295                 ((RES_CONF_FAIL++))
2296                 __print_err "need 2 args, <container-name>|<service-name> url" $@
2297                 return 1
2298         fi
2299
2300         if [ $RUNMODE == "KUBE" ]; then
2301                 ENTITY="service/set/deployment"
2302         else
2303                 ENTITY="container"
2304         fi
2305         appname=$1
2306         url=$2
2307         echo -ne " Container $BOLD${appname}$EBOLD starting${SAMELINE}"
2308
2309
2310         pa_st=false
2311         echo -ne " Waiting for ${ENTITY} ${appname} service status...${SAMELINE}"
2312         TSTART=$SECONDS
2313         loop_ctr=0
2314         while (( $TSTART+600 > $SECONDS )); do
2315                 result="$(__do_curl -m 10 $url)"
2316                 if [ $? -eq 0 ]; then
2317                         if [ ${#result} -gt 15 ]; then
2318                                 #If response is too long, truncate
2319                                 result="...response text too long, omitted"
2320                         fi
2321                         echo -ne " Waiting for {ENTITY} $BOLD${appname}$EBOLD service status on ${3}, result: $result${SAMELINE}"
2322                         echo -ne " The ${ENTITY} $BOLD${appname}$EBOLD$GREEN is alive$EGREEN, responds to service status:$GREEN $result $EGREEN on ${url} after $(($SECONDS-$TSTART)) seconds"
2323                         pa_st=true
2324                         break
2325                 else
2326                         TS_TMP=$SECONDS
2327                         TS_OFFSET=$loop_ctr
2328                         if (( $TS_OFFSET > 5 )); then
2329                                 TS_OFFSET=5
2330                         fi
2331                         while [ $(($TS_TMP+$TS_OFFSET)) -gt $SECONDS ]; do
2332                                 echo -ne " Waiting for ${ENTITY} ${appname} service status on ${url}...$(($SECONDS-$TSTART)) seconds, retrying in $(($TS_TMP+$TS_OFFSET-$SECONDS)) seconds   ${SAMELINE}"
2333                                 sleep 1
2334                         done
2335                 fi
2336                 let loop_ctr=loop_ctr+1
2337         done
2338
2339         if [ "$pa_st" = "false"  ]; then
2340                 ((RES_CONF_FAIL++))
2341                 echo -e $RED" The ${ENTITY} ${appname} did not respond to service status on ${url} in $(($SECONDS-$TSTART)) seconds"$ERED
2342                 return 1
2343         fi
2344
2345         echo ""
2346         return 0
2347 }
2348
2349
2350 #################
2351 ### Log functions
2352 #################
2353
2354 __check_container_logs() {
2355
2356         dispname=$1
2357         appname=$2
2358         logpath=$3
2359         warning=$4
2360         error=$5
2361
2362         echo -e $BOLD"Checking $dispname container $appname log ($logpath) for WARNINGs and ERRORs"$EBOLD
2363
2364         if [ $RUNMODE == "KUBE" ]; then
2365                 echo -e $YELLOW" Internal log for $dispname not checked in kube"$EYELLOW
2366                 return
2367         fi
2368
2369         #tmp=$(docker ps | grep $appname)
2370         tmp=$(docker ps -q --filter name=$appname) #get the container id
2371         if [ -z "$tmp" ]; then  #Only check logs for running Policy Agent apps
2372                 echo " "$dispname" is not running, no check made"
2373                 return
2374         fi
2375         foundentries="$(docker exec -t $tmp grep $warning $logpath | wc -l)"
2376         if [ $? -ne  0 ];then
2377                 echo "  Problem to search $appname log $logpath"
2378         else
2379                 if [ $foundentries -eq 0 ]; then
2380                         echo "  No WARN entries found in $appname log $logpath"
2381                 else
2382                         echo -e "  Found \033[1m"$foundentries"\033[0m WARN entries in $appname log $logpath"
2383                 fi
2384         fi
2385         foundentries="$(docker exec -t $tmp grep $error $logpath | wc -l)"
2386         if [ $? -ne  0 ];then
2387                 echo "  Problem to search $appname log $logpath"
2388         else
2389                 if [ $foundentries -eq 0 ]; then
2390                         echo "  No ERR entries found in $appname log $logpath"
2391                 else
2392                         echo -e $RED"  Found \033[1m"$foundentries"\033[0m"$RED" ERR entries in $appname log $logpath"$ERED
2393                 fi
2394         fi
2395         echo ""
2396 }
2397
2398 # Store all container logs and other logs in the log dir for the script
2399 # Logs are stored with a prefix in case logs should be stored several times during a test
2400 # args: <logfile-prefix>
2401 # (Function for test scripts)
2402 store_logs() {
2403         if [ $# != 1 ]; then
2404                 ((RES_CONF_FAIL++))
2405         __print_err "need one arg, <file-prefix>" $@
2406                 exit 1
2407         fi
2408         echo -e $BOLD"Storing all docker/kube container logs and other test logs in $TESTLOGS/$ATC using prefix: "$1$EBOLD
2409
2410         docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
2411
2412         docker ps -a  > $TESTLOGS/$ATC/$1_docker_ps.log 2>&1
2413
2414         cp .httplog_${ATC}.txt $TESTLOGS/$ATC/$1_httplog_${ATC}.txt 2>&1
2415
2416         if [ $RUNMODE == "DOCKER" ]; then
2417
2418                 # Store docker logs for all container
2419                 for imagename in $APP_SHORT_NAMES; do
2420                         __check_included_image $imagename
2421                         if [ $? -eq 0 ]; then
2422                                 # A function name is created from the app short name
2423                                 # for example app short name 'RICMSIM' -> produce the function
2424                                 # name __RICSIM__store_docker_logs
2425                                 # This function is called and is expected to exist in the imported
2426                                 # file for the ricsim test functions
2427                                 # The resulting function impl shall store the docker logs for each container
2428                                 function_pointer="__"$imagename"_store_docker_logs"
2429                                 $function_pointer "$TESTLOGS/$ATC/" $1
2430                         fi
2431                 done
2432         fi
2433         if [ $RUNMODE == "KUBE" ]; then
2434                 namespaces=$(kubectl  get namespaces -o jsonpath='{.items[?(@.metadata.name)].metadata.name}')
2435                 for nsid in $namespaces; do
2436                         pods=$(kubectl get pods -n $nsid -o jsonpath='{.items[?(@.metadata.labels.autotest)].metadata.name}')
2437                         for podid in $pods; do
2438                                 kubectl logs -n $nsid $podid > $TESTLOGS/$ATC/$1_${podid}.log
2439                         done
2440                 done
2441         fi
2442         echo ""
2443 }
2444
2445 ###############
2446 ## Generic curl
2447 ###############
2448 # Generic curl function, assumes all 200-codes are ok
2449 # args: <valid-curl-args-including full url>
2450 # returns: <returned response (without respose code)>  or "<no-response-from-server>" or "<not found, <http-code>>""
2451 # returns: The return code is 0 for ok and 1 for not ok
2452 __do_curl() {
2453         echo ${FUNCNAME[1]} "line: "${BASH_LINENO[1]} >> $HTTPLOG
2454         proxyflag=""
2455         if [ $RUNMODE == "KUBE" ]; then
2456                 if [ ! -z "$KUBE_PROXY_PATH" ]; then
2457                         if [ $KUBE_PROXY_HTTPX == "http" ]; then
2458                                 proxyflag=" --proxy $KUBE_PROXY_PATH"
2459                         else
2460                                 proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
2461                         fi
2462                 fi
2463         fi
2464         curlString="curl -skw %{http_code} $proxyflag $@"
2465         echo " CMD: $curlString" >> $HTTPLOG
2466         res=$($curlString)
2467         retcode=$?
2468         echo " RESP: $res" >> $HTTPLOG
2469         echo " RETCODE: $retcode" >> $HTTPLOG
2470         if [ $retcode -ne 0 ]; then
2471                 echo "<no-response-from-server>"
2472                 return 1
2473         fi
2474         http_code="${res:${#res}-3}"
2475         if [ ${#res} -eq 3 ]; then
2476                 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
2477                         echo "<no-response-from-server>"
2478                         return 1
2479                 else
2480                         return 0
2481                 fi
2482         else
2483                 if [ $http_code -lt 200 ] || [ $http_code -gt 299 ]; then
2484                         echo "<not found, resp:${http_code}>"
2485                         return 1
2486                 fi
2487                 if [ $# -eq 2 ]; then
2488                         echo "${res:0:${#res}-3}" | xargs
2489                 else
2490                         echo "${res:0:${#res}-3}"
2491                 fi
2492
2493                 return 0
2494         fi
2495 }
2496
2497 #######################################
2498 ### Basic helper function for test cases
2499 #######################################
2500
2501 # Test a simulator container variable value towards target value using an condition operator with an optional timeout.
2502 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value>  - This test is done
2503 # immediately and sets pass or fail depending on the result of comparing variable and target using the operator.
2504 # Arg: <simulator-name> <host> <variable-name> <condition-operator> <target-value> <timeout>  - This test waits up to the timeout
2505 # before setting pass or fail depending on the result of comparing variable and target using the operator.
2506 # If the <variable-name> has the 'json:' prefix, the the variable will be used as url and the <target-value> will be compared towards the length of the json array in the response.
2507 # Not to be called from test script.
2508
2509 __var_test() {
2510         checkjsonarraycount=0
2511         TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
2512         if [ $# -eq 6 ]; then
2513                 if [[ $3 == "json:"* ]]; then
2514                         checkjsonarraycount=1
2515                 fi
2516
2517                 echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
2518         echo "TEST $TEST_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds" >> $HTTPLOG
2519
2520                 ((RES_TEST++))
2521                 ((TEST_SEQUENCE_NR++))
2522                 start=$SECONDS
2523                 ctr=0
2524                 for (( ; ; )); do
2525                         if [ $checkjsonarraycount -eq 0 ]; then
2526                                 result="$(__do_curl $2$3)"
2527                                 retcode=$?
2528                                 result=${result//[[:blank:]]/} #Strip blanks
2529                         else
2530                                 path=${3:5}
2531                                 result="$(__do_curl $2$path)"
2532                                 retcode=$?
2533                                 echo "$result" > ./tmp/.tmp.curl.json
2534                                 result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
2535                         fi
2536                         duration=$((SECONDS-start))
2537                         echo -ne " Result=${result} after ${duration} seconds${SAMELINE}"
2538                         let ctr=ctr+1
2539                         if [ $retcode -ne 0 ]; then
2540                                 if [ $duration -gt $6 ]; then
2541                                         ((RES_FAIL++))
2542                                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
2543                                         __print_current_stats
2544                                         __check_stop_at_error
2545                                         return
2546                                 fi
2547                         elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
2548                                 ((RES_PASS++))
2549                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2550                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2551                                 __print_current_stats
2552                                 return
2553                         elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2554                                 ((RES_PASS++))
2555                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2556                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2557                                 __print_current_stats
2558                                 return
2559                         elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2560                                 ((RES_PASS++))
2561                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2562                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2563                                 __print_current_stats
2564                                 return
2565                         elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2566                                 ((RES_PASS++))
2567                                 echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
2568                                 echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
2569                                 __print_current_stats
2570                                 return
2571                         else
2572                                 if [ $duration -gt $6 ]; then
2573                                         ((RES_FAIL++))
2574                                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
2575                                         __print_current_stats
2576                                         __check_stop_at_error
2577                                         return
2578                                 fi
2579                         fi
2580                         sleep 1
2581                 done
2582         elif [ $# -eq 5 ]; then
2583                 if [[ $3 == "json:"* ]]; then
2584                         checkjsonarraycount=1
2585                 fi
2586
2587                 echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
2588                 echo "TEST $TEST_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}" >> $HTTPLOG
2589                 ((RES_TEST++))
2590                 ((TEST_SEQUENCE_NR++))
2591                 if [ $checkjsonarraycount -eq 0 ]; then
2592                         result="$(__do_curl $2$3)"
2593                         retcode=$?
2594                         result=${result//[[:blank:]]/} #Strip blanks
2595                 else
2596                         path=${3:5}
2597                         result="$(__do_curl $2$path)"
2598                         retcode=$?
2599                         echo "$result" > ./tmp/.tmp.curl.json
2600                         result=$(python3 ../common/count_json_elements.py "./tmp/.tmp.curl.json")
2601                 fi
2602                 if [ $retcode -ne 0 ]; then
2603                         ((RES_FAIL++))
2604                         echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
2605                         __print_current_stats
2606                         __check_stop_at_error
2607                 elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
2608                         ((RES_PASS++))
2609                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2610                         __print_current_stats
2611                 elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
2612                         ((RES_PASS++))
2613                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2614                         __print_current_stats
2615                 elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
2616                         ((RES_PASS++))
2617                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2618                         __print_current_stats
2619                 elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
2620                         ((RES_PASS++))
2621                         echo -e $GREEN" PASS${EGREEN} - Result=${result}"
2622                         __print_current_stats
2623                 else
2624                         ((RES_FAIL++))
2625                         echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
2626                         __print_current_stats
2627                         __check_stop_at_error
2628                 fi
2629         else
2630                 echo "Wrong args to __var_test, needs five or six args: <simulator-name> <host> <variable-name> <condition-operator> <target-value> [ <timeout> ]"
2631                 echo "Got:" $@
2632                 exit 1
2633         fi
2634 }