test/common/mr_api_functions.sh

   1 #!/bin/bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 # This is a script that contains container/service management function
  21 # and test functions for Message Router - mr stub
  22
  23 ################ Test engine functions ################
  24
  25 # Create the image var used during the test
  26 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
  27 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
  28 __MR_imagesetup() {
  29         __check_and_create_image_var MR "MRSTUB_IMAGE" "MRSTUB_IMAGE_BASE" "MRSTUB_IMAGE_TAG" LOCAL "$MR_STUB_DISPLAY_NAME"
  30 }
  31
  32 # Create the image var used during the test
  33 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
  34 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
  35 __DMAAPMR_imagesetup() {
  36         __check_and_create_image_var DMAAPMR "ONAP_DMAAPMR_IMAGE"    "ONAP_DMAAPMR_IMAGE_BASE"  "ONAP_DMAAPMR_IMAGE_TAG"   REMOTE_RELEASE_ONAP "DMAAP Message Router"
  37         __check_and_create_image_var DMAAPMR "ONAP_ZOOKEEPER_IMAGE" "ONAP_ZOOKEEPER_IMAGE_BASE" "ONAP_ZOOKEEPER_IMAGE_TAG" REMOTE_RELEASE_ONAP "ZooKeeper"
  38         __check_and_create_image_var DMAAPMR "ONAP_KAFKA_IMAGE"     "ONAP_KAFKA_IMAGE_BASE"     "ONAP_KAFKA_IMAGE_TAG"     REMOTE_RELEASE_ONAP "Kafka"
  39 }
  40
  41 # Pull image from remote repo or use locally built image
  42 # arg: <pull-policy-override> <pull-policy-original>
  43 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
  44 # <pull-policy-original> Shall be used for images that does not allow overriding
  45 # Both var may contain: 'remote', 'remote-remove' or 'local'
  46 __MR_imagepull() {
  47         echo -e $RED"Image for app MR shall never be pulled from remote repo"$ERED
  48 }
  49
  50 # Pull image from remote repo or use locally built image
  51 # arg: <pull-policy-override> <pull-policy-original>
  52 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released (remote) images
  53 # <pull-policy-original> Shall be used for images that does not allow overriding
  54 # Both var may contain: 'remote', 'remote-remove' or 'local'
  55 __DMAAPMR_imagepull() {
  56         __check_and_pull_image $2 "DMAAP Message Router" $MR_DMAAP_APP_NAME ONAP_DMAAPMR_IMAGE
  57         __check_and_pull_image $2 "ZooKeeper" $MR_ZOOKEEPER_APP_NAME ONAP_ZOOKEEPER_IMAGE
  58         __check_and_pull_image $2 "Kafka" $MR_KAFKA_APP_NAME ONAP_KAFKA_IMAGE
  59 }
  60
  61 # Build image (only for simulator or interfaces stubs owned by the test environment)
  62 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
  63 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
  64 __MR_imagebuild() {
  65         cd ../mrstub
  66         echo " Building MR - $MR_STUB_DISPLAY_NAME - image: $MRSTUB_IMAGE"
  67         docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $MRSTUB_IMAGE . &> .dockererr
  68         if [ $? -eq 0 ]; then
  69                 echo -e  $GREEN"  Build Ok"$EGREEN
  70                 __retag_and_push_image MRSTUB_IMAGE
  71                 if [ $? -ne 0 ]; then
  72                         exit 1
  73                 fi
  74         else
  75                 echo -e $RED"  Build Failed"$ERED
  76                 ((RES_CONF_FAIL++))
  77                 cat .dockererr
  78                 echo -e $RED"Exiting...."$ERED
  79                 exit 1
  80         fi
  81 }
  82
  83 # Build image (only for simulator or interfaces stubs owned by the test environment)
  84 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
  85 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
  86 __DMAAPMR_imagebuild() {
  87         echo -e $RED"Image for app DMAAPMR shall never be built"$ERED
  88 }
  89
  90 # Generate a string for each included image using the app display name and a docker images format string
  91 # If a custom image repo is used then also the source image from the local repo is listed
  92 # arg: <docker-images-format-string> <file-to-append>
  93 __MR_image_data() {
  94         echo -e "$MR_STUB_DISPLAY_NAME\t$(docker images --format $1 $MRSTUB_IMAGE)" >>   $2
  95         if [ ! -z "$MRSTUB_IMAGE_SOURCE" ]; then
  96                 echo -e "-- source image --\t$(docker images --format $1 $MRSTUB_IMAGE_SOURCE)" >>   $2
  97         fi
  98 }
  99
 100 # Generate a string for each included image using the app display name and a docker images format string
 101 # If a custom image repo is used then also the source image from the local repo is listed
 102 # arg: <docker-images-format-string> <file-to-append>
 103 __DMAAPMR_image_data() {
 104         echo -e "DMAAP Message Router\t$(docker images --format $1 $ONAP_DMAAPMR_IMAGE)" >>   $2
 105         if [ ! -z "$ONAP_DMAAPMR_IMAGE_SOURCE" ]; then
 106                 echo -e "-- source image --\t$(docker images --format $1 $ONAP_DMAAPMR_IMAGE_SOURCE)" >>   $2
 107         fi
 108         echo -e "ZooKeeper\t$(docker images --format $1 $ONAP_ZOOKEEPER_IMAGE)" >>   $2
 109         if [ ! -z "$ONAP_ZOOKEEPER_IMAGE_SOURCE" ]; then
 110                 echo -e "-- source image --\t$(docker images --format $1 $ONAP_ZOOKEEPER_IMAGE_SOURCE)" >>   $2
 111         fi
 112         echo -e "Kafka\t$(docker images --format $1 $ONAP_KAFKA_IMAGE)" >>   $2
 113         if [ ! -z "$ONAP_KAFKA_IMAGE_SOURCE" ]; then
 114                 echo -e "-- source image --\t$(docker images --format $1 $ONAP_KAFKA_IMAGE_SOURCE)" >>   $2
 115         fi
 116 }
 117
 118 # Scale kubernetes resources to zero
 119 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 120 # This function is called for apps fully managed by the test script
 121 __MR_kube_scale_zero() {
 122         __kube_scale_all_resources $KUBE_ONAP_NAMESPACE autotest MR
 123 }
 124
 125 # Scale kubernetes resources to zero
 126 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 127 # This function is called for apps fully managed by the test script
 128 __DMAAPMR_kube_scale_zero() {
 129         __kube_scale_all_resources $KUBE_ONAP_NAMESPACE autotest DMAAPMR
 130 }
 131
 132 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 133 # This function is called for prestarted apps not managed by the test script.
 134 __MR_kube_scale_zero_and_wait() {
 135         echo -e " MR replicas kept as is"
 136 }
 137
 138 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 139 # This function is called for prestarted apps not managed by the test script.
 140 __DMAAPMR_kube_scale_zero_and_wait() {
 141         echo -e " DMAAP replicas kept as is"
 142 }
 143
 144 # Delete all kube resouces for the app
 145 # This function is called for apps managed by the test script.
 146 __MR_kube_delete_all() {
 147         __kube_delete_all_resources $KUBE_ONAP_NAMESPACE autotest MR
 148 }
 149
 150 # Delete all kube resouces for the app
 151 # This function is called for apps managed by the test script.
 152 __DMAAPMR_kube_delete_all() {
 153         __kube_delete_all_resources $KUBE_ONAP_NAMESPACE autotest DMAAPMR
 154 }
 155
 156 # Store docker logs
 157 # This function is called for apps managed by the test script.
 158 # args: <log-dir> <file-prexix>
 159 __MR_store_docker_logs() {
 160         docker logs $MR_STUB_APP_NAME > $1$2_mr_stub.log 2>&1
 161 }
 162
 163 # Store docker logs
 164 # This function is called for apps managed by the test script.
 165 # args: <log-dir> <file-prexix>
 166 __DMAAPMR_store_docker_logs() {
 167         docker logs $MR_DMAAP_APP_NAME > $1$2mr.log 2>&1
 168         docker logs $MR_KAFKA_APP_NAME > $1$2_mr_kafka.log 2>&1
 169         docker logs $MR_ZOOKEEPER_APP_NAME > $1$2_mr_zookeeper.log 2>&1
 170 }
 171
 172 #######################################################
 173
 174 ## Access to Message Router
 175 # Host name may be changed if app started by kube
 176 # Direct access from script
 177 MR_HTTPX="http"
 178 MR_STUB_HOST_NAME=$LOCALHOST_NAME
 179 MR_DMAAP_HOST_NAME=$LOCALHOST_NAME
 180 MR_STUB_PATH=$MR_HTTPX"://"$MR_STUB_HOST_NAME":"$MR_STUB_LOCALHOST_PORT
 181 MR_DMAAP_PATH=$MR_HTTPX"://"$MR_DMAAP_HOST_NAME":"$MR_DMAAP_LOCALHOST_PORT
 182 #Docker/Kube internal path
 183 if [ $RUNMODE == "KUBE" ]; then
 184         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 185         __check_included_image "DMAAPMR"
 186         if [ $? -eq 0 ]; then
 187                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 188         fi
 189         __check_prestarted_image "DMAAPMR"
 190         if [ $? -eq 0 ]; then
 191                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 192         fi
 193 else
 194         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME":"$MR_INTERNAL_PORT
 195         __check_included_image "DMAAPMR"
 196         if [ $? -eq 0 ]; then
 197                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME":"$MR_INTERNAL_PORT
 198         fi
 199 fi
 200 MR_ADAPTER_HTTP="http://"$MR_STUB_HOST_NAME":"$MR_STUB_LOCALHOST_PORT
 201 MR_ADAPTER_HTTPS="https://"$MR_STUB_HOST_NAME":"$MR_STUB_LOCALHOST_SECURE_PORT
 202
 203
 204 #####################
 205 ### MR stub functions
 206 #####################
 207
 208 use_mr_http() {
 209         echo -e $BOLD"MR protocol setting"$EBOLD
 210         echo -e " Using $BOLD http $EBOLD towards MR"
 211         MR_HTTPX="http"
 212         MR_STUB_PATH=$MR_HTTPX"://"$MR_STUB_HOST_NAME":"$MR_STUB_LOCALHOST_PORT
 213         MR_DMAAP_PATH=$MR_HTTPX"://"$MR_DMAAP_HOST_NAME":"$MR_DMAAP_LOCALHOST_PORT
 214         #Docker/Kube internal path
 215         if [ $RUNMODE == "KUBE" ]; then
 216                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 217                 __check_included_image "DMAAPMR"
 218                 if [ $? -eq 0 ]; then
 219                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 220                 fi
 221                 __check_prestarted_image "DMAAPMR"
 222                 if [ $? -eq 0 ]; then
 223                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_PORT
 224                 fi
 225         else
 226                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME":"$MR_INTERNAL_PORT
 227                 __check_included_image "DMAAPMR"
 228                 if [ $? -eq 0 ]; then
 229                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME":"$MR_INTERNAL_PORT
 230                 fi
 231         fi
 232         echo ""
 233 }
 234
 235 use_mr_https() {
 236         echo -e $BOLD"MR protocol setting"$EBOLD
 237         echo -e " Using $BOLD https $EBOLD towards MR"
 238         MR_HTTPX="https"
 239         MR_STUB_PATH=$MR_HTTPX"://"$MR_STUB_HOST_NAME":"$MR_STUB_LOCALHOST_SECURE_PORT
 240         MR_DMAAP_PATH=$MR_HTTPX"://"$MR_DMAAP_HOST_NAME":"$MR_DMAAP_LOCALHOST_SECURE_PORT
 241         #Docker/Kube internal path
 242         if [ $RUNMODE == "KUBE" ]; then
 243                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_SECURE_PORT
 244                 __check_included_image "DMAAPMR"
 245                 if [ $? -eq 0 ]; then
 246                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_SECURE_PORT
 247                 fi
 248                 __check_prestarted_image "DMAAPMR"
 249                 if [ $? -eq 0 ]; then
 250                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXTERNAL_SECURE_PORT
 251                 fi
 252         else
 253                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME":"$MR_INTERNAL_SECURE_PORT
 254                 __check_included_image "DMAAPMR"
 255                 if [ $? -eq 0 ]; then
 256                         MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME":"$MR_INTERNAL_SECURE_PORT
 257                 fi
 258         fi
 259         echo ""
 260 }
 261
 262 # Create a dmaap mr topic
 263 # args: <topic name> <topic-description>
 264 __create_topic() {
 265         echo -ne " Creating read topic: $1"$SAMELINE
 266
 267         json_topic="{\"topicName\":\"$1\",\"partitionCount\":\"2\", \"replicationCount\":\"3\", \"transactionEnabled\":\"false\",\"topicDescription\":\"$2\"}"
 268         echo $json_topic > ./tmp/$1.json
 269
 270         curlString="$MR_DMAAP_PATH/topics/create -X POST  -H Content-Type:application/json -d@./tmp/$1.json"
 271         topic_retries=5
 272         while [ $topic_retries -gt 0 ]; do
 273                 let topic_retries=topic_retries-1
 274                 result=$(__do_curl "$curlString")
 275                 if [ $? -eq 0 ]; then
 276                         topic_retries=0
 277                         echo -e " Creating read topic: $1 $GREEN OK $EGREEN"
 278                 fi
 279                 if [ $? -ne 0 ]; then
 280                         if [ $topic_retries -eq 0 ]; then
 281                                 echo -e " Creating read topic: $1 $RED Failed $ERED"
 282                                 ((RES_CONF_FAIL++))
 283                                 return 1
 284                         else
 285                                 sleep 1
 286                         fi
 287                 fi
 288         done
 289         return 0
 290 }
 291
 292 # Do a pipeclean of a topic - to overcome dmaap mr bug...
 293 # args: <topic> <post-url> <read-url>
 294 __dmaap_pipeclean() {
 295         pipeclean_retries=50
 296         echo -ne " Doing dmaap-mr pipe cleaning on topic: $1"$SAMELINE
 297         while [ $pipeclean_retries -gt 0 ]; do
 298                 echo "{\"pipeclean-$1\":$pipeclean_retries}" > ./tmp/pipeclean.json
 299                 let pipeclean_retries=pipeclean_retries-1
 300                 curlString="$MR_DMAAP_PATH$2 -X POST  -H Content-Type:application/json -d@./tmp/pipeclean.json"
 301                 result=$(__do_curl "$curlString")
 302                 if [ $? -ne 0 ]; then
 303                         sleep 1
 304                 else
 305                         curlString="$MR_DMAAP_PATH$3"
 306                         result=$(__do_curl "$curlString")
 307                         if [ $? -eq 0 ]; then
 308                                 if [ $result != "[]" ]; then
 309                                         echo -e " Doing dmaap-mr pipe cleaning on topic: $1 $GREEN OK $EGREEN"
 310                                         return 0
 311
 312                                 else
 313                                         sleep 1
 314                                 fi
 315                         fi
 316                 fi
 317         done
 318         echo -e "Doing dmaap-mr pipe cleaning on topic: $1 $RED Failed $ERED"
 319         return 1
 320 }
 321
 322 # Start the Message Router stub interface in the simulator group
 323 # args: -
 324 # (Function for test scripts)
 325 start_mr() {
 326
 327         echo -e $BOLD"Starting $MR_DMAAP_DISPLAY_NAME and/or $MR_STUB_DISPLAY_NAME"$EBOLD
 328
 329         if [ $RUNMODE == "KUBE" ]; then
 330
 331         # Table of possible combinations of included mr and included/prestarted dmaap-mr
 332                 # mr can never be prestarted
 333                 # mr can be used stand alone
 334                 # if dmaapmr is included/prestarted, then mr is needed as well as frontend
 335
 336         # Inverted logic - 0 mean true, 1 means false
 337                 # mr prestarted      0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
 338                 # mr included        0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
 339                 # dmaap prestarted   0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
 340                 # dmaap included     0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
 341                 # ==================================================
 342                 # OK                 1 1 1 1 1 0 1 1 1 0 1 1 1 0 1 1
 343
 344                 __check_prestarted_image 'MR'
 345                 retcode_prestarted_mr=$?
 346                 __check_included_image 'MR'
 347                 retcode_included_mr=$?
 348
 349                 __check_prestarted_image 'DMAAPMR'
 350                 retcode_prestarted_dmaapmr=$?
 351                 __check_included_image 'DMAAPMR'
 352                 retcode_included_dmaapmr=$?
 353
 354                 paramerror=1
 355
 356                 if [ $retcode_prestarted_mr -ne 0 ] && [ $retcode_included_mr -eq 0 ]; then
 357                         if [ $retcode_prestarted_dmaapmr -ne 0 ] && [ $retcode_included_dmaapmr -eq 0 ]; then
 358                                 paramerror=0
 359                         fi
 360                 fi
 361
 362                 if [ $retcode_prestarted_mr -ne 0 ] && [ $retcode_included_mr -eq 0 ]; then
 363                         if [ $retcode_prestarted_dmaapmr -eq 0 ] && [ $retcode_included_dmaapmr -ne 0 ]; then
 364                                 paramerror=0
 365                         fi
 366                 fi
 367
 368                 if [ $retcode_prestarted_mr -ne 0 ] && [ $retcode_included_mr -eq 0 ]; then
 369                         if [ $retcode_prestarted_dmaapmr -ne 0 ] && [ $retcode_included_dmaapmr -ne 0 ]; then
 370                                 paramerror=0
 371                         fi
 372                 fi
 373
 374                 if [ $paramerror -ne 0 ]; then
 375                                 echo -e $RED"The Message Router apps 'MR' and/or 'DMAAPMR' are not included in this test script"$ERED
 376                                 echo -e $RED"The Message Router will not be started"$ERED
 377                                 echo -e $RED"Both MR and DAAMPMR  - or - only MR - need to be included and/or prestarted"
 378                                 exit
 379                 fi
 380
 381                 if [ $retcode_prestarted_dmaapmr -eq 0 ]; then
 382                         echo -e " Using existing $MR_DMAAP_APP_NAME deployment and service"
 383                         __kube_scale deployment $MR_DMAAP_APP_NAME $KUBE_ONAP_NAMESPACE 1
 384                 fi
 385
 386                 if [ $retcode_included_dmaapmr -eq 0 ]; then
 387                         #export MR_DMAAP_APP_NAME
 388                         export MR_DMAAP_KUBE_APP_NAME=message-router
 389                         MR_DMAAP_APP_NAME=$MR_DMAAP_KUBE_APP_NAME
 390                         export KUBE_ONAP_NAMESPACE
 391                         export MR_EXTERNAL_PORT
 392                         export MR_INTERNAL_PORT
 393                         export MR_EXTERNAL_SECURE_PORT
 394                         export MR_INTERNAL_SECURE_PORT
 395                         export ONAP_DMAAPMR_IMAGE
 396
 397                         export MR_KAFKA_BWDS_NAME=akfak-bwds
 398                         export KUBE_ONAP_NAMESPACE
 399
 400                         export MR_ZOOKEEPER_APP_NAME
 401                         export ONAP_ZOOKEEPER_IMAGE
 402
 403                         #Check if onap namespace exists, if not create it
 404                         __kube_create_namespace $KUBE_ONAP_NAMESPACE
 405
 406                         # TODO - Fix domain name substitution in the prop file
 407                         # Create config maps - dmaapmr app
 408                         configfile=$PWD/tmp/MsgRtrApi.properties
 409                         cp $SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"mnt/mr/KUBE-MsgRtrApi.properties $configfile
 410                         output_yaml=$PWD/tmp/dmaapmr_msgrtrapi_cfc.yaml
 411                         __kube_create_configmap dmaapmr-msgrtrapi.properties $KUBE_ONAP_NAMESPACE autotest DMAAPMR $configfile $output_yaml
 412
 413                         configfile=$PWD/tmp/logback.xml
 414                         cp $SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"mnt/mr/logback.xml $configfile
 415                         output_yaml=$PWD/tmp/dmaapmr_logback_cfc.yaml
 416                         __kube_create_configmap dmaapmr-logback.xml $KUBE_ONAP_NAMESPACE autotest DMAAPMR $configfile $output_yaml
 417
 418                         configfile=$PWD/tmp/cadi.properties
 419                         cp $SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"mnt/mr/cadi.properties $configfile
 420                         output_yaml=$PWD/tmp/dmaapmr_cadi_cfc.yaml
 421                         __kube_create_configmap dmaapmr-cadi.properties $KUBE_ONAP_NAMESPACE autotest DMAAPMR $configfile $output_yaml
 422
 423                         # Create config maps - kafka app
 424                         configfile=$PWD/tmp/zk_client_jaas.conf
 425                         cp $SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"mnt/kafka/zk_client_jaas.conf $configfile
 426                         output_yaml=$PWD/tmp/dmaapmr_zk_client_cfc.yaml
 427                         __kube_create_configmap dmaapmr-zk-client-jaas.conf $KUBE_ONAP_NAMESPACE autotest DMAAPMR $configfile $output_yaml
 428
 429                         # Create config maps - zookeeper app
 430                         configfile=$PWD/tmp/zk_server_jaas.conf
 431                         cp $SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"mnt/zk/zk_server_jaas.conf $configfile
 432                         output_yaml=$PWD/tmp/dmaapmr_zk_server_cfc.yaml
 433                         __kube_create_configmap dmaapmr-zk-server-jaas.conf $KUBE_ONAP_NAMESPACE autotest DMAAPMR $configfile $output_yaml
 434
 435                         # Create service
 436                         input_yaml=$SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"svc.yaml
 437                         output_yaml=$PWD/tmp/dmaapmr_svc.yaml
 438                         __kube_create_instance service $MR_DMAAP_APP_NAME $input_yaml $output_yaml
 439
 440                         # Create app
 441                         input_yaml=$SIM_GROUP"/"$MR_DMAAP_COMPOSE_DIR"/"app.yaml
 442                         output_yaml=$PWD/tmp/dmaapmr_app.yaml
 443                         __kube_create_instance app $MR_DMAAP_APP_NAME $input_yaml $output_yaml
 444
 445
 446                         echo " Retrieving host and ports for service..."
 447                         MR_DMAAP_HOST_NAME=$(__kube_get_service_host $MR_DMAAP_APP_NAME $KUBE_ONAP_NAMESPACE)
 448
 449                         MR_EXT_PORT=$(__kube_get_service_port $MR_DMAAP_APP_NAME $KUBE_ONAP_NAMESPACE "http")
 450                         MR_EXT_SECURE_PORT=$(__kube_get_service_port $MR_DMAAP_APP_NAME $KUBE_ONAP_NAMESPACE "https")
 451
 452                         echo " Host IP, http port, https port: $MR_DMAAP_APP_NAME $MR_EXT_PORT $MR_EXT_SECURE_PORT"
 453                         MR_SERVICE_PATH=""
 454                         if [ $MR_HTTPX == "http" ]; then
 455                                 MR_DMAAP_PATH=$MR_HTTPX"://"$MR_DMAAP_HOST_NAME":"$MR_EXT_PORT
 456                                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXT_PORT
 457                         else
 458                                 MR_DMAAP_PATH=$MR_HTTPX"://"$MR_DMAAP_HOST_NAME":"$MR_EXT_SECURE_PORT
 459                                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_DMAAP_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXT_SECURE_PORT
 460                         fi
 461
 462                                 __check_service_start $MR_DMAAP_APP_NAME $MR_DMAAP_PATH$MR_DMAAP_ALIVE_URL
 463
 464                 fi
 465
 466                 if [ $retcode_included_mr -eq 0 ]; then
 467                         #exporting needed var for deployment
 468                         export MR_STUB_APP_NAME
 469                         export KUBE_ONAP_NAMESPACE
 470                         export MRSTUB_IMAGE
 471                         export MR_INTERNAL_PORT
 472                         export MR_INTERNAL_SECURE_PORT
 473                         export MR_EXTERNAL_PORT
 474                         export MR_EXTERNAL_SECURE_PORT
 475
 476                         if [ $retcode_prestarted_dmaapmr -eq 0 ] || [ $retcode_included_dmaapmr -eq 0 ]; then  # Set topics for dmaap
 477                                 export TOPIC_READ="http://$MR_DMAAP_APP_NAME.$KUBE_ONAP_NAMESPACE:$MR_INTERNAL_PORT/events/$MR_READ_TOPIC"
 478                                 export TOPIC_WRITE="http://$MR_DMAAP_APP_NAME.$KUBE_ONAP_NAMESPACE:$MR_INTERNAL_PORT/events/$MR_WRITE_TOPIC/users/mr-stub?timeout=15000&limit=100"
 479                         else
 480                                 export TOPIC_READ=""
 481                                 export TOPIC_WRITE=""
 482                         fi
 483
 484                         #Check if onap namespace exists, if not create it
 485                         __kube_create_namespace $KUBE_ONAP_NAMESPACE
 486
 487                         # Create service
 488                         input_yaml=$SIM_GROUP"/"$MR_STUB_COMPOSE_DIR"/"svc.yaml
 489                         output_yaml=$PWD/tmp/mr_svc.yaml
 490                         __kube_create_instance service $MR_STUB_APP_NAME $input_yaml $output_yaml
 491
 492                         # Create app
 493                         input_yaml=$SIM_GROUP"/"$MR_STUB_COMPOSE_DIR"/"app.yaml
 494                         output_yaml=$PWD/tmp/mr_app.yaml
 495                         __kube_create_instance app $MR_STUB_APP_NAME $input_yaml $output_yaml
 496
 497
 498                 fi
 499
 500
 501                 echo " Retrieving host and ports for service..."
 502                 MR_STUB_HOST_NAME=$(__kube_get_service_host $MR_STUB_APP_NAME $KUBE_ONAP_NAMESPACE)
 503
 504                 MR_EXT_PORT=$(__kube_get_service_port $MR_STUB_APP_NAME $KUBE_ONAP_NAMESPACE "http")
 505                 MR_EXT_SECURE_PORT=$(__kube_get_service_port $MR_STUB_APP_NAME $KUBE_ONAP_NAMESPACE "https")
 506
 507                 echo " Host IP, http port, https port: $MR_STUB_APP_NAME $MR_EXT_PORT $MR_EXT_SECURE_PORT"
 508                 if [ $MR_HTTPX == "http" ]; then
 509                         MR_STUB_PATH=$MR_HTTPX"://"$MR_STUB_HOST_NAME":"$MR_EXT_PORT
 510                         if [ -z "$MR_SERVICE_PATH" ]; then
 511                                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXT_PORT
 512                         fi
 513                 else
 514                         MR_STUB_PATH=$MR_HTTPX"://"$MR_STUB_HOST_NAME":"$MR_EXT_SECURE_PORT
 515                         if [ -z "$MR_SERVICE_PATH" ]; then
 516                                 MR_SERVICE_PATH=$MR_HTTPX"://"$MR_STUB_APP_NAME"."$KUBE_ONAP_NAMESPACE":"$MR_EXT_SECURE_PORT
 517                         fi
 518                 fi
 519                 MR_ADAPTER_HTTP="http://"$MR_STUB_HOST_NAME":"$MR_EXT_PORT
 520                 MR_ADAPTER_HTTPS="https://"$MR_STUB_HOST_NAME":"$MR_EXT_SECURE_PORT
 521
 522                 __check_service_start $MR_STUB_APP_NAME $MR_STUB_PATH$MR_STUB_ALIVE_URL
 523
 524                 echo -ne " Service $MR_STUB_APP_NAME - reset  "$SAMELINE
 525                 result=$(__do_curl $MR_STUB_APP_NAME $MR_STUB_PATH/reset)
 526                 if [ $? -ne 0 ]; then
 527                         echo -e " Service $MR_STUB_APP_NAME - reset  $RED Failed $ERED - will continue"
 528                 else
 529                         echo -e " Service $MR_STUB_APP_NAME - reset  $GREEN OK $EGREEN"
 530                 fi
 531
 532
 533         else
 534
 535                 __check_included_image 'DMAAPMR'
 536                 retcode_dmaapmr=$?
 537                 __check_included_image 'MR'
 538                 retcode_mr=$?
 539
 540                 if [ $retcode_dmaapmr -ne 0 ] && [ $retcode_mr -ne 0 ]; then
 541                                 echo -e $RED"The Message Router apps 'MR' and/or 'DMAAPMR' are not included in this test script"$ERED
 542                                 echo -e $RED"The Message Router will not be started"$ERED
 543                                 echo -e $RED"Both MR and DAAMPMR  - or - only MR - need to be included"
 544                                 exit
 545                 fi
 546
 547                 if [ $retcode_dmaapmr -eq 0 ] && [ $retcode_mr -ne 0 ]; then
 548                                 echo -e $RED"The Message Router apps 'MR' and/or 'DMAAPMR' are not included in this test script"$ERED
 549                                 echo -e $RED"The Message Router will not be started"$ERED
 550                                 echo -e $RED"Both MR and DAAMPMR  - or - only MR - need to be included"
 551                                 exit
 552                 fi
 553
 554                 export TOPIC_READ=""
 555         export TOPIC_WRITE=""
 556                 if [ $retcode_dmaapmr -eq 0 ]; then  # Set topics for dmaap
 557                         export TOPIC_READ="http://$MR_DMAAP_APP_NAME:$MR_INTERNAL_PORT/events/$MR_READ_TOPIC"
 558                         export TOPIC_WRITE="http://$MR_DMAAP_APP_NAME:$MR_INTERNAL_PORT/events/$MR_WRITE_TOPIC/users/mr-stub?timeout=15000&limit=100"
 559                 fi
 560
 561                 export DOCKER_SIM_NWNAME
 562                 export ONAP_ZOOKEEPER_IMAGE
 563                 export MR_ZOOKEEPER_APP_NAME
 564                 export ONAP_KAFKA_IMAGE
 565                 export MR_KAFKA_APP_NAME
 566                 export ONAP_DMAAPMR_IMAGE
 567                 export MR_DMAAP_APP_NAME
 568                 export MR_DMAAP_LOCALHOST_PORT
 569                 export MR_INTERNAL_PORT
 570                 export MR_DMAAP_LOCALHOST_SECURE_PORT
 571                 export MR_INTERNAL_SECURE_PORT
 572
 573                 if [ $retcode_dmaapmr -eq 0 ]; then
 574                         __start_container $MR_DMAAP_COMPOSE_DIR "" NODOCKERARGS 1 $MR_DMAAP_APP_NAME
 575
 576                         __check_service_start $MR_DMAAP_APP_NAME $MR_DMAAP_PATH$MR_DMAAP_ALIVE_URL
 577
 578
 579                         __create_topic $MR_READ_TOPIC "Topic for reading policy messages"
 580
 581                         __create_topic $MR_WRITE_TOPIC "Topic for writing policy messages"
 582
 583                         __dmaap_pipeclean $MR_READ_TOPIC "/events/$MR_READ_TOPIC" "/events/$MR_READ_TOPIC/users/policy-agent?timeout=1000&limit=100"
 584
 585                         __dmaap_pipeclean $MR_WRITE_TOPIC "/events/$MR_WRITE_TOPIC" "/events/$MR_WRITE_TOPIC/users/mr-stub?timeout=1000&limit=100"
 586
 587                         echo " Current topics:"
 588                         curlString="$MR_DMAAP_PATH/topics"
 589                         result=$(__do_curl "$curlString")
 590                         echo $result | indent2
 591                 fi
 592
 593                 export DOCKER_SIM_NWNAME
 594                 export MR_STUB_APP_NAME
 595                 export MRSTUB_IMAGE
 596                 export MR_INTERNAL_PORT
 597                 export MR_INTERNAL_SECURE_PORT
 598                 export MR_STUB_LOCALHOST_PORT
 599                 export MR_STUB_LOCALHOST_SECURE_PORT
 600                 export MR_STUB_CERT_MOUNT_DIR
 601                 export MR_STUB_DISPLAY_NAME
 602
 603                 if [ $retcode_mr -eq 0 ]; then
 604                         __start_container $MR_STUB_COMPOSE_DIR "" NODOCKERARGS 1 $MR_STUB_APP_NAME
 605
 606                         __check_service_start $MR_STUB_APP_NAME $MR_STUB_PATH$MR_STUB_ALIVE_URL
 607                 fi
 608
 609         fi
 610         echo ""
 611         return 0
 612 }
 613
 614 ### Generic test cases for varaible checking
 615
 616 # Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
 617 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
 618 # equal to the target or not.
 619 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
 620 # before setting pass or fail depending on if the variable value becomes equal to the target
 621 # value or not.
 622 # (Function for test scripts)
 623 mr_equal() {
 624         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
 625                 __var_test "MR" $MR_STUB_PATH/counter/ $1 "=" $2 $3
 626         else
 627                 ((RES_CONF_FAIL++))
 628                 __print_err "Wrong args to mr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
 629         fi
 630 }
 631
 632 # Tests if a variable value in the MR stub is greater than a target value and and optional timeout.
 633 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
 634 # greater than the target or not.
 635 # Arg: <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
 636 # before setting pass or fail depending on if the variable value becomes greater than the target
 637 # value or not.
 638 # (Function for test scripts)
 639 mr_greater() {
 640         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
 641                 __var_test "MR" $MR_STUB_PATH/counter/ $1 ">" $2 $3
 642         else
 643                 ((RES_CONF_FAIL++))
 644                 __print_err "Wrong args to mr_greater, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
 645         fi
 646 }
 647
 648 # Read a variable value from MR sim and send to stdout. Arg: <variable-name>
 649 mr_read() {
 650         echo "$(__do_curl $MR_STUB_PATH/counter/$1)"
 651 }
 652
 653 # Print a variable value from the MR stub.
 654 # arg: <variable-name>
 655 # (Function for test scripts)
 656 mr_print() {
 657         if [ $# != 1 ]; then
 658                 ((RES_CONF_FAIL++))
 659         __print_err "need one arg, <mr-param>" $@
 660                 exit 1
 661         fi
 662         echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $MR_STUB_PATH/counter/$1)"$EBOLD
 663 }