Updates of function test for f-release
[nonrtric.git] / test / common / cr_api_functions.sh
1 #!/bin/bash
2
3 #  ============LICENSE_START===============================================
4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 #  ========================================================================
6 #  Licensed under the Apache License, Version 2.0 (the "License");
7 #  you may not use this file except in compliance with the License.
8 #  You may obtain a copy of the License at
9 #
10 #       http://www.apache.org/licenses/LICENSE-2.0
11 #
12 #  Unless required by applicable law or agreed to in writing, software
13 #  distributed under the License is distributed on an "AS IS" BASIS,
14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 #  See the License for the specific language governing permissions and
16 #  limitations under the License.
17 #  ============LICENSE_END=================================================
18 #
19
20 # This is a script that contains container/service managemnt functions test functions for the Callback Reciver
21
22
23 ################ Test engine functions ################
24
25 # Create the image var used during the test
26 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
27 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
28 __CR_imagesetup() {
29         __check_and_create_image_var CR "CR_IMAGE" "CR_IMAGE_BASE" "CR_IMAGE_TAG" LOCAL "$CR_DISPLAY_NAME"
30 }
31
32 # Pull image from remote repo or use locally built image
33 # arg: <pull-policy-override> <pull-policy-original>
34 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
35 # <pull-policy-original> Shall be used for images that does not allow overriding
36 # Both var may contain: 'remote', 'remote-remove' or 'local'
37 __CR_imagepull() {
38         echo -e $RED" Image for app CR shall never be pulled from remote repo"$ERED
39 }
40
41 # Build image (only for simulator or interfaces stubs owned by the test environment)
42 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
43 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
44 __CR_imagebuild() {
45         cd ../cr
46         echo " Building CR - $CR_DISPLAY_NAME - image: $CR_IMAGE"
47         docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $CR_IMAGE . &> .dockererr
48         if [ $? -eq 0 ]; then
49                 echo -e  $GREEN"  Build Ok"$EGREEN
50                 __retag_and_push_image CR_IMAGE
51                 if [ $? -ne 0 ]; then
52                         exit 1
53                 fi
54         else
55                 echo -e $RED"  Build Failed"$ERED
56                 ((RES_CONF_FAIL++))
57                 cat .dockererr
58                 echo -e $RED"Exiting...."$ERED
59                 exit 1
60         fi
61 }
62
63 # Generate a string for each included image using the app display name and a docker images format string
64 # If a custom image repo is used then also the source image from the local repo is listed
65 # arg: <docker-images-format-string> <file-to-append>
66 __CR_image_data() {
67         echo -e "$CR_DISPLAY_NAME\t$(docker images --format $1 $CR_IMAGE)" >>   $2
68         if [ ! -z "$CR_IMAGE_SOURCE" ]; then
69                 echo -e "-- source image --\t$(docker images --format $1 $CR_IMAGE_SOURCE)" >>   $2
70         fi
71 }
72
73 # Scale kubernetes resources to zero
74 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
75 # This function is called for apps fully managed by the test script
76 __CR_kube_scale_zero() {
77         __kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest CR
78 }
79
80 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
81 # This function is called for prestarted apps not managed by the test script.
82 __CR_kube_scale_zero_and_wait() {
83         echo -e $RED" CR app is not scaled in this state"$ERED
84 }
85
86 # Delete all kube resouces for the app
87 # This function is called for apps managed by the test script.
88 __CR_kube_delete_all() {
89         __kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest CR
90 }
91
92 # Store docker logs
93 # This function is called for apps managed by the test script.
94 # args: <log-dir> <file-prexix>
95 __CR_store_docker_logs() {
96         if [ $RUNMODE == "KUBE" ]; then
97                 for podname in $(kubectl get pods -n $KUBE_SIM_NAMESPACE -l "autotest=CR" -o custom-columns=":metadata.name"); do
98                         kubectl logs -n $KUBE_SIM_NAMESPACE $podname --tail=-1 > $1$2_$podname.log 2>&1
99                 done
100         else
101                 crs=$(docker ps --filter "name=$CR_APP_NAME" --filter "network=$DOCKER_SIM_NWNAME" --filter "status=running" --format {{.Names}})
102                 for crid in $crs; do
103                         docker logs $crid > $1$2_$crid.log 2>&1
104                 done
105         fi
106 }
107
108 # Initial setup of protocol, host and ports
109 # This function is called for apps managed by the test script.
110 # args: -
111 __CR_initial_setup() {
112         use_cr_http
113 }
114
115 # Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
116 # For docker, the namespace shall be excluded
117 # This function is called for apps managed by the test script as well as for prestarted apps.
118 # args: -
119 __CR_statisics_setup() {
120         for ((CR_INSTANCE=MAX_CR_APP_COUNT; CR_INSTANCE>0; CR_INSTANCE-- )); do
121                 if [ $RUNMODE == "KUBE" ]; then
122                         CR_INSTANCE_KUBE=$(($CR_INSTANCE-1))
123                         echo -n " CR-$CR_INSTANCE_KUBE $CR_APP_NAME-$CR_INSTANCE_KUBE $KUBE_SIM_NAMESPACE "
124                 else
125                         if [ $DOCKER_COMPOSE_VERION == "V1" ]; then
126                                 echo -n " CR_$CR_INSTANCE ${CR_APP_NAME}_cr_$CR_INSTANCE "
127                         else
128                                 echo -n " CR_$CR_INSTANCE ${CR_APP_NAME}-cr-$CR_INSTANCE "
129                         fi
130                 fi
131         done
132 }
133
134 # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
135 # args: -
136 __CR_test_requirements() {
137         :
138 }
139
140 #######################################################
141
142 ################
143 ### CR functions
144 ################
145
146 #Var to hold the current number of CR instances
147 CR_APP_COUNT=1
148 MAX_CR_APP_COUNT=10
149
150 # Set http as the protocol to use for all communication to the Dmaap adapter
151 # args: -
152 # (Function for test scripts)
153 use_cr_http() {
154         __cr_set_protocoll "http" $CR_INTERNAL_PORT $CR_EXTERNAL_PORT
155 }
156
157 # Set https as the protocol to use for all communication to the Dmaap adapter
158 # args: -
159 # (Function for test scripts)
160 use_cr_https() {
161         __cr_set_protocoll "https" $CR_INTERNAL_SECURE_PORT $CR_EXTERNAL_SECURE_PORT
162 }
163
164 # Setup paths to svc/container for internal and external access
165 # args: <protocol> <internal-port> <external-port>
166 __cr_set_protocoll() {
167
168         echo -e $BOLD"$CR_DISPLAY_NAME protocol setting"$EBOLD
169         echo -e " Using $BOLD $1 $EBOLD towards $CR_DISPLAY_NAME"
170         ## Access to Dmaap adapter
171         for ((CR_INSTANCE=0; CR_INSTANCE<$MAX_CR_APP_COUNT; CR_INSTANCE++ )); do
172                 CR_DOCKER_INSTANCE=$(($CR_INSTANCE+1))
173                 # CR_SERVICE_PATH is the base path to cr
174                 if [ $DOCKER_COMPOSE_VERION == "V1" ]; then
175                         __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"_cr_"${CR_DOCKER_INSTANCE}":"$2  # docker access, container->container and script->container via proxy
176                 else
177                         __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"-cr-"${CR_DOCKER_INSTANCE}":"$2  # docker access, container->container and script->container via proxy
178                 fi
179                 if [ $RUNMODE == "KUBE" ]; then
180                         __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"-"$CR_INSTANCE.$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
181                 fi
182                 export CR_SERVICE_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH
183                 # Service paths are used in test script to provide callbacck urls to app
184                 export CR_SERVICE_MR_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK_MR  #Only for messages from dmaap adapter/mediator
185                 export CR_SERVICE_TEXT_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK_TEXT  #Callbacks for text payload
186                 export CR_SERVICE_APP_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK    #For general callbacks from apps
187
188                 if [ $CR_INSTANCE -eq 0 ]; then
189                         # CR_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
190                         # CR_ADDAPTER need to be set before each call to CR....only set for instance 0 here
191                         CR_ADAPTER_TYPE="REST"
192                         CR_ADAPTER=$__CR_SERVICE_PATH
193                 fi
194         done
195         echo ""
196 }
197
198 # Export env vars for config files, docker compose and kube resources
199 # args: <proxy-flag>
200 __cr_export_vars() {
201         export CR_APP_NAME
202         export CR_DISPLAY_NAME
203
204         export KUBE_SIM_NAMESPACE
205         export DOCKER_SIM_NWNAME
206
207         export CR_IMAGE
208
209         export CR_INTERNAL_PORT
210         export CR_INTERNAL_SECURE_PORT
211         export CR_EXTERNAL_PORT
212         export CR_EXTERNAL_SECURE_PORT
213
214         export CR_APP_COUNT
215 }
216
217 # Start the Callback reciver in the simulator group
218 # args: <app-count>
219 # (Function for test scripts)
220 start_cr() {
221
222         echo -e $BOLD"Starting $CR_DISPLAY_NAME"$EBOLD
223
224         if [ $# -ne 1 ]; then
225                 echo -e $RED" Number of CR instances missing, usage: start_cr <app-count>"$ERED
226                 exit 1
227         fi
228         if [ $1 -lt 1 ] || [ $1 -gt 10 ]; then
229                 echo -e $RED" Number of CR shall be 1...10, usage: start_cr <app-count>"$ERED
230                 exit 1
231         fi
232         export CR_APP_COUNT=$1
233
234         if [ $RUNMODE == "KUBE" ]; then
235
236                 # Check if app shall be fully managed by the test script
237                 __check_included_image "CR"
238                 retcode_i=$?
239
240                 # Check if app shall only be used by the testscipt
241                 __check_prestarted_image "CR"
242                 retcode_p=$?
243
244                 if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
245                         echo -e $RED"The $CR_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
246                         echo -e $RED"The $CR_APP_NAME will not be started"$ERED
247                         exit
248                 fi
249                 if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
250                         echo -e $RED"The $CR_APP_NAME app is included both as managed and prestarted in this test script"$ERED
251                         echo -e $RED"The $CR_APP_NAME will not be started"$ERED
252                         exit
253                 fi
254
255                 # Check if app shall be used - not managed - by the test script
256                 if [ $retcode_p -eq 0 ]; then
257                         echo -e " Using existing $CR_APP_NAME deployment and service"
258                         echo " Setting CR replicas=1"
259                         __kube_scale deployment $CR_APP_NAME $KUBE_SIM_NAMESPACE 1
260                 fi
261
262                 if [ $retcode_i -eq 0 ]; then
263                         echo -e " Creating $CR_APP_NAME deployment and service"
264
265                         __cr_export_vars
266
267                         __kube_create_namespace $KUBE_SIM_NAMESPACE
268
269                         # Create service
270                         input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"svc.yaml
271                         output_yaml=$PWD/tmp/cr_svc.yaml
272                         __kube_create_instance service $CR_APP_NAME $input_yaml $output_yaml
273
274                         # Create app
275                         input_yaml=$SIM_GROUP"/"$CR_COMPOSE_DIR"/"app.yaml
276                         output_yaml=$PWD/tmp/cr_app.yaml
277                         __kube_create_instance app $CR_APP_NAME $input_yaml $output_yaml
278
279                 fi
280
281                 for ((CR_INSTANCE=0; CR_INSTANCE<$CR_APP_COUNT; CR_INSTANCE++ )); do
282                         __dynvar="CR_SERVICE_PATH_"$CR_INSTANCE
283                         __cr_app_name=$CR_APP_NAME"-"$CR_INSTANCE
284                         __check_service_start $__cr_app_name ${!__dynvar}$CR_ALIVE_URL
285                         result=$(__do_curl ${!__dynvar}/reset)
286                 done
287
288         else
289                 # Check if docker app shall be fully managed by the test script
290                 __check_included_image 'CR'
291                 if [ $? -eq 1 ]; then
292                         echo -e $RED"The Callback Receiver app is not included in this test script"$ERED
293                         echo -e $RED"The Callback Receiver will not be started"$ERED
294                         exit
295                 fi
296
297                 __cr_export_vars
298
299                 app_data=""
300                 cntr=1
301                 while [ $cntr -le $CR_APP_COUNT ]; do
302                         if [ $DOCKER_COMPOSE_VERION == "V1" ]; then
303                                 app=$CR_APP_NAME"_cr_"$cntr
304                         else
305                                 app=$CR_APP_NAME"-cr-"$cntr
306                         fi
307                         app_data="$app_data $app"
308                         let cntr=cntr+1
309                 done
310
311                 echo "COMPOSE_PROJECT_NAME="$CR_APP_NAME > $SIM_GROUP/$CR_COMPOSE_DIR/.env
312
313                 __start_container $CR_COMPOSE_DIR "" NODOCKERARGS $CR_APP_COUNT $app_data
314
315                 cntr=1   #Counter for docker instance, starts on 1
316                 cntr2=0  #Couter for env var name, starts with 0 to be compablible with kube
317                 while [ $cntr -le $CR_APP_COUNT ]; do
318                         if [ $DOCKER_COMPOSE_VERION == "V1" ]; then
319                                 app=$CR_APP_NAME"_cr_"$cntr
320                         else
321                                 app=$CR_APP_NAME"-cr-"$cntr
322                         fi
323                         __dynvar="CR_SERVICE_PATH_"$cntr2
324                         __check_service_start $app ${!__dynvar}$CR_ALIVE_URL
325                         let cntr=cntr+1
326                         let cntr2=cntr2+1
327                 done
328         fi
329         echo ""
330 }
331
332 #Convert a cr path id to the value of the environment var holding the url
333 # arg: <cr-path-id>
334 # returns: <base-url-to-the-app>
335 __cr_get_service_path(){
336         if [ $# -ne 1 ]; then
337                 echo "DUMMY"
338                 return 1
339         fi
340         if [ $1 -lt 0 ] || [ $1 -ge $MAX_CR_APP_COUNT ]; then
341                 echo "DUMMY"
342                 return 1
343         fi
344         __dynvar="CR_SERVICE_PATH_"$1
345         echo ${!__dynvar}
346         return 0
347 }
348
349 # Tests if a variable value in the CR is equal to a target value and and optional timeout.
350 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
351 # equal to the target or not.
352 # Arg: <cr-path-id> <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
353 # before setting pass or fail depending on if the variable value becomes equal to the target
354 # value or not.
355 # (Function for test scripts)
356 cr_equal() {
357         if [ $# -eq 3 ] || [ $# -eq 4 ]; then
358                 CR_SERVICE_PATH=$(__cr_get_service_path $1)
359                 CR_ADAPTER=$CR_SERVICE_PATH
360                 if [ $? -ne 0 ]; then
361                         __print_err "<cr-path-id> missing or incorrect" $@
362                         return 1
363                 fi
364                 __var_test "CR" "$CR_SERVICE_PATH/counter/" $2 "=" $3 $4
365         else
366                 __print_err "Wrong args to cr_equal, needs three or four args: <cr-path-id>  <variable-name> <target-value> [ timeout ]" $@
367         fi
368 }
369
370 # Tests if a variable value in the CR contains the target string and and optional timeout
371 # Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable contains
372 # the target or not.
373 # Arg: <cr-path-id> <variable-name> <target-value> <timeout-in-sec>  - This test waits up to the timeout seconds
374 # before setting pass or fail depending on if the variable value contains the target
375 # value or not.
376 # (Function for test scripts)
377 cr_contains_str() {
378
379         if [ $# -eq 3 ] || [ $# -eq 4 ]; then
380                 CR_SERVICE_PATH=$(__cr_get_service_path $1)
381                 CR_ADAPTER=$CR_SERVICE_PATH
382                 if [ $? -ne 0 ]; then
383                         __print_err "<cr-path-id> missing or incorrect" $@
384                         return 1
385                 fi
386                 __var_test "CR" "$CR_SERVICE_PATH/counter/" $2 "contain_str" $3 $4
387                 return 0
388         else
389                 __print_err "needs two or three args: <cr-path-id> <variable-name> <target-value> [ timeout ]"
390                 return 1
391         fi
392 }
393
394 # Read a variable value from CR sim and send to stdout. Arg: <variable-name>
395 cr_read() {
396         CR_SERVICE_PATH=$(__cr_get_service_path $1)
397         CR_ADAPTER=$CR_SERVICE_PATH
398         if [ $? -ne 0 ]; then
399                 __print_err "<cr-path-id> missing or incorrect" $@
400                 return  1
401         fi
402         echo "$(__do_curl $CR_SERVICE_PATH/counter/$1)"
403 }
404
405 # Function to configure write delay on callbacks
406 # Delay given in seconds.
407 # arg <response-code> <cr-path-id>  <delay-in-sec>
408 # (Function for test scripts)
409 cr_delay_callback() {
410         __log_conf_start $@
411
412         if [ $# -ne 3 ]; then
413         __print_err "<response-code> <cr-path-id> <delay-in-sec>]" $@
414         return 1
415         fi
416
417         CR_SERVICE_PATH=$(__cr_get_service_path $2)
418         CR_ADAPTER=$CR_SERVICE_PATH
419         if [ $? -ne 0 ]; then
420                 __print_err "<cr-path-id> missing or incorrect" $@
421                 return 1
422         fi
423
424         res="$(__do_curl_to_api CR POST /forcedelay?delay=$3)"
425         status=${res:${#res}-3}
426
427         if [ $status -ne 200 ]; then
428                 __log_conf_fail_status_code $1 $status
429                 return 1
430         fi
431
432         __log_conf_ok
433         return 0
434 }
435
436 # CR API: Check the contents of all current ric sync events for one id from PMS
437 # <response-code> <cr-path-id> <id> [ EMPTY | ( <ric-id> )+ ]
438 # (Function for test scripts)
439 cr_api_check_all_sync_events() {
440         __log_test_start $@
441
442         if [ "$PMS_VERSION" != "V2" ]; then
443                 __log_test_fail_not_supported
444                 return 1
445         fi
446
447     if [ $# -lt 3 ]; then
448         __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <ric-id> )+ ]" $@
449         return 1
450     fi
451
452         CR_SERVICE_PATH=$(__cr_get_service_path $2)
453         CR_ADAPTER=$CR_SERVICE_PATH
454         if [ $? -ne 0 ]; then
455                 __print_err "<cr-path-id> missing or incorrect" $@
456                 return 1
457         fi
458
459         query="/get-all-events/"$3
460         res="$(__do_curl_to_api CR GET $query)"
461         status=${res:${#res}-3}
462
463         if [ $status -ne $1 ]; then
464                 __log_test_fail_status_code $1 $status
465                 return 1
466         fi
467
468         if [ $# -gt 3 ]; then
469                 body=${res:0:${#res}-3}
470                 if [ $# -eq 4 ] && [ $4 == "EMPTY" ]; then
471                         targetJson="["
472                 else
473                         targetJson="["
474                         arr=(${@:4})
475
476                         for ((i=0; i<$(($#-3)); i=i+1)); do
477
478                                 if [ "$targetJson" != "[" ]; then
479                                         targetJson=$targetJson","
480                                 fi
481                                 targetJson=$targetJson"{\"ric_id\":\"${arr[$i]}\",\"event_type\":\"AVAILABLE\"}"
482                         done
483                 fi
484
485                 targetJson=$targetJson"]"
486                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
487                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
488
489                 if [ $res -ne 0 ]; then
490                         __log_test_fail_body
491                         return 1
492                 fi
493         fi
494         __log_test_pass
495         return 0
496 }
497
498 # CR API: Check the contents of all current status events for one id from ICS
499 # <response-code> <cr-path-id> <id> [ EMPTY | ( <status> )+ ]
500 # (Function for test scripts)
501 cr_api_check_all_ics_events() {
502         __log_test_start $@
503
504     if [ $# -lt 3 ]; then
505         __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <status> )+ ]" $@
506         return 1
507     fi
508
509         CR_SERVICE_PATH=$(__cr_get_service_path $2)
510         CR_ADAPTER=$CR_SERVICE_PATH
511         if [ $? -ne 0 ]; then
512                 __print_err "<cr-path-id> missing or incorrect" $@
513                 return 1
514         fi
515
516         query="/get-all-events/"$3
517         res="$(__do_curl_to_api CR GET $query)"
518         status=${res:${#res}-3}
519
520         if [ $status -ne $1 ]; then
521                 __log_test_fail_status_code $1 $status
522                 return 1
523         fi
524
525         if [ $# -gt 3 ]; then
526                 body=${res:0:${#res}-3}
527                 if [ $# -eq 4 ] && [ $4 == "EMPTY" ]; then
528                         targetJson="["
529                 else
530                         targetJson="["
531                         arr=(${@:4})
532
533                         for ((i=0; i<$(($#-3)); i=i+1)); do
534
535                                 if [ "$targetJson" != "[" ]; then
536                                         targetJson=$targetJson","
537                                 fi
538                                 targetJson=$targetJson"{\"eiJobStatus\":\"${arr[$i]}\"}"
539                         done
540                 fi
541
542                 targetJson=$targetJson"]"
543                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
544                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
545
546                 if [ $res -ne 0 ]; then
547                         __log_test_fail_body
548                         return 1
549                 fi
550         fi
551         __log_test_pass
552         return 0
553 }
554
555 # CR API: Check the contents of all current type subscription events for one id from ICS
556 # <response-code> <cr-path-id> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]
557 # (Function for test scripts)
558 cr_api_check_all_ics_subscription_events() {
559         __log_test_start $@
560
561         #Valid number of parameter 3,4,8,12
562         paramError=1
563         if [ $# -eq 3 ]; then
564                 paramError=0
565         fi
566         if [ $# -eq 4 ] && [ "$4" == "EMPTY" ]; then
567                 paramError=0
568         fi
569         variablecount=$(($#-3))
570         if [ $# -gt 4 ] && [ $(($variablecount%3)) -eq 0 ]; then
571                 paramError=0
572         fi
573         if [ $paramError -eq 1 ]; then
574                 __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]" $@
575                 return 1
576         fi
577
578         CR_SERVICE_PATH=$(__cr_get_service_path $2)
579         CR_ADAPTER=$CR_SERVICE_PATH
580         if [ $? -ne 0 ]; then
581                 __print_err "<cr-path-id> missing or incorrect" $@
582                 return 1
583         fi
584
585         query="/get-all-events/"$3
586         res="$(__do_curl_to_api CR GET $query)"
587         status=${res:${#res}-3}
588
589         if [ $status -ne $1 ]; then
590                 __log_test_fail_status_code $1 $status
591                 return 1
592         fi
593
594         if [ $# -gt 3 ]; then
595                 body=${res:0:${#res}-3}
596                 targetJson="["
597                 if [ $# -gt 4 ]; then
598                         arr=(${@:4})
599                         for ((i=0; i<$(($#-4)); i=i+3)); do
600                                 if [ "$targetJson" != "[" ]; then
601                                         targetJson=$targetJson","
602                                 fi
603                                 if [ -f ${arr[$i+1]} ]; then
604                                         jobfile=$(cat ${arr[$i+1]})
605                                 else
606                                         __log_test_fail_general "Job schema file "${arr[$i+1]}", does not exist"
607                                         return 1
608                                 fi
609                                 targetJson=$targetJson"{\"info_type_id\":\"${arr[$i]}\",\"job_data_schema\":$jobfile,\"status\":\"${arr[$i+2]}\"}"
610                         done
611                 fi
612                 targetJson=$targetJson"]"
613
614                 echo " TARGET JSON: $targetJson" >> $HTTPLOG
615                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
616
617                 if [ $res -ne 0 ]; then
618                         __log_test_fail_body
619                         return 1
620                 fi
621         fi
622
623         __log_test_pass
624         return 0
625 }
626
627
628 # CR API: Reset all events and counters
629 # Arg: <cr-path-id>
630 # (Function for test scripts)
631 cr_api_reset() {
632         __log_conf_start $@
633
634         if [ $# -ne 1 ]; then
635                 __print_err "<cr-path-id>" $@
636                 return 1
637         fi
638
639         CR_SERVICE_PATH=$(__cr_get_service_path $1)
640         CR_ADAPTER=$CR_SERVICE_PATH
641         if [ $? -ne 0 ]; then
642                 __print_err "<cr-path-id> missing or incorrect" $@
643                 return 1
644         fi
645
646         res="$(__do_curl_to_api CR GET /reset)"
647         status=${res:${#res}-3}
648
649         if [ $status -ne 200 ]; then
650                 __log_conf_fail_status_code $1 $status
651                 return 1
652         fi
653
654         __log_conf_ok
655         return 0
656 }
657
658
659 # CR API: Check the contents of all json events for path
660 # <response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg>+ )
661 # (Function for test scripts)
662 cr_api_check_all_genric_json_events() {
663         __log_test_start $@
664
665         if [ $# -lt 4 ]; then
666                 __print_err "<response-code> <cr-path-id>  <topic-url> (EMPTY | <json-msg>+ )" $@
667                 return 1
668         fi
669
670         CR_SERVICE_PATH=$(__cr_get_service_path $2)
671         CR_ADAPTER=$CR_SERVICE_PATH
672         if [ $? -ne 0 ]; then
673                 __print_err "<cr-path-id> missing or incorrect" $@
674                 return 1
675         fi
676
677         query="/get-all-events/"$3
678         res="$(__do_curl_to_api CR GET $query)"
679         status=${res:${#res}-3}
680
681         if [ $status -ne $1 ]; then
682                 __log_test_fail_status_code $1 $status
683                 return 1
684         fi
685         body=${res:0:${#res}-3}
686         targetJson="["
687
688         if [ $4 != "EMPTY" ]; then
689                 shift
690                 shift
691                 shift
692                 while [ $# -gt 0 ]; do
693                         if [ "$targetJson" != "[" ]; then
694                                 targetJson=$targetJson","
695                         fi
696                         targetJson=$targetJson$1
697                         shift
698                 done
699         fi
700         targetJson=$targetJson"]"
701
702         echo " TARGET JSON: $targetJson" >> $HTTPLOG
703         res=$(python3 ../common/compare_json.py "$targetJson" "$body")
704
705         if [ $res -ne 0 ]; then
706                 __log_test_fail_body
707                 return 1
708         fi
709
710         __log_test_pass
711         return 0
712 }
713
714
715 # CR API: Check a single (oldest) json event (or none if empty) for path
716 # <response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg> )
717 # (Function for test scripts)
718 cr_api_check_single_genric_json_event() {
719         __log_test_start $@
720
721         if [ $# -ne 4 ]; then
722                 __print_err "<response-code> <cr-path-id>  <topic-url> (EMPTY | <json-msg> )" $@
723                 return 1
724         fi
725
726         CR_SERVICE_PATH=$(__cr_get_service_path $2)
727         CR_ADAPTER=$CR_SERVICE_PATH
728         if [ $? -ne 0 ]; then
729                 __print_err "<cr-path-id> missing or incorrect" $@
730                 return 1
731         fi
732
733         query="/get-event/"$3
734         res="$(__do_curl_to_api CR GET $query)"
735         status=${res:${#res}-3}
736
737         if [ $status -ne $1 ]; then
738                 __log_test_fail_status_code $1 $status
739                 return 1
740         fi
741         body=${res:0:${#res}-3}
742         targetJson=$4
743
744         if [ $targetJson == "EMPTY" ] && [ ${#body} -ne 0 ]; then
745                 __log_test_fail_body
746                 return 1
747         fi
748         echo " TARGET JSON: $targetJson" >> $HTTPLOG
749         res=$(python3 ../common/compare_json.py "$targetJson" "$body")
750
751         if [ $res -ne 0 ]; then
752                 __log_test_fail_body
753                 return 1
754         fi
755
756         __log_test_pass
757         return 0
758 }
759
760 # CR API: Check a single (oldest) json in md5 format (or none if empty) for path.
761 # Note that if a json message is given, it shall be compact, no ws except inside string.
762 # The MD5 will generate different hash if ws is present or not in otherwise equivalent json
763 # arg: <response-code> <cr-path-id> <topic-url> (EMPTY | <data-msg> )
764 # (Function for test scripts)
765 cr_api_check_single_genric_event_md5() {
766         __log_test_start $@
767
768         if [ $# -ne 4 ]; then
769                 __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <data-msg> )" $@
770                 return 1
771         fi
772
773         CR_SERVICE_PATH=$(__cr_get_service_path $2)
774         CR_ADAPTER=$CR_SERVICE_PATH
775         if [ $? -ne 0 ]; then
776                 __print_err "<cr-path-id> missing or incorrect" $@
777                 return 1
778         fi
779
780         query="/get-event/"$3
781         res="$(__do_curl_to_api CR GET $query)"
782         status=${res:${#res}-3}
783
784         if [ $status -ne $1 ]; then
785                 __log_test_fail_status_code $1 $status
786                 return 1
787         fi
788         body=${res:0:${#res}-3}
789         if [ $4 == "EMPTY" ]; then
790                 if [ ${#body} -ne 0 ]; then
791                         __log_test_fail_body
792                         return 1
793                 else
794                         __log_test_pass
795                         return 0
796                 fi
797         fi
798         command -v md5 > /dev/null # Mac
799         if [ $? -eq 0 ]; then
800                 targetMd5=$(echo -n "$4" | md5)
801         else
802                 command -v md5sum > /dev/null # Linux
803                 if [ $? -eq 0 ]; then
804                         targetMd5=$(echo -n "$4" | md5sum | cut -d' ' -f 1)  # Need to cut additional info printed by cmd
805                 else
806                         __log_test_fail_general "Command md5 nor md5sum is available"
807                         return 1
808                 fi
809         fi
810         targetMd5="\""$targetMd5"\"" #Quotes needed
811
812         echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG
813
814         if [ "$body" != "$targetMd5" ]; then
815                 __log_test_fail_body
816                 return 1
817         fi
818
819         __log_test_pass
820         return 0
821 }
822
823 # CR API: Check a single (oldest) event in md5 format (or none if empty) for path.
824 # Note that if a file with json message is given, the json shall be compact, no ws except inside string and not newlines.
825 # The MD5 will generate different hash if ws/newlines is present or not in otherwise equivalent json
826 # arg: <response-code> <cr-path-id> <topic-url> (EMPTY | <data-file> )
827 # (Function for test scripts)
828 cr_api_check_single_genric_event_md5_file() {
829         __log_test_start $@
830
831         if [ $# -ne 4 ]; then
832                 __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <data-file> )" $@
833                 return 1
834         fi
835
836         CR_SERVICE_PATH=$(__cr_get_service_path $2)
837         CR_ADAPTER=$CR_SERVICE_PATH
838         if [ $? -ne 0 ]; then
839                 __print_err "<cr-path-id> missing or incorrect" $@
840                 return 1
841         fi
842
843         query="/get-event/"$3
844         res="$(__do_curl_to_api CR GET $query)"
845         status=${res:${#res}-3}
846
847         if [ $status -ne $1 ]; then
848                 __log_test_fail_status_code $1 $status
849                 return 1
850         fi
851         body=${res:0:${#res}-3}
852         if [ $4 == "EMPTY" ]; then
853                 if [ ${#body} -ne 0 ]; then
854                         __log_test_fail_body
855                         return 1
856                 else
857                         __log_test_pass
858                         return 0
859                 fi
860         fi
861
862         if [ ! -f $4 ]; then
863                 __log_test_fail_general "File $3 does not exist"
864                 return 1
865         fi
866
867         filedata=$(cat $4)
868
869         command -v md5 > /dev/null # Mac
870         if [ $? -eq 0 ]; then
871                 targetMd5=$(echo -n "$filedata" | md5)
872         else
873                 command -v md5sum > /dev/null # Linux
874                 if [ $? -eq 0 ]; then
875                         targetMd5=$(echo -n "$filedata" | md5sum | cut -d' ' -f 1)  # Need to cut additional info printed by cmd
876                 else
877                         __log_test_fail_general "Command md5 nor md5sum is available"
878                         return 1
879                 fi
880         fi
881         targetMd5="\""$targetMd5"\""   #Quotes needed
882
883         echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG
884
885         if [ "$body" != "$targetMd5" ]; then
886                 __log_test_fail_body
887                 return 1
888         fi
889
890         __log_test_pass
891         return 0
892 }