test/common/api_curl.sh

   1 #!/bin/bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 # Generic function to query the A1PMS/ICS via the REST or DMAAP interface.
  21 # Used by all other A1PMS/ICS api test functions
  22 # If operation sufffix is '_BATCH' the the send and get response is split in two sequences,
  23 # one for sending the requests and one for receiving the response
  24 # but only when using the DMAAP interface
  25 # REST or DMAAP is controlled of the base url of $XX_ADAPTER
  26 # arg: (A1PMS|ICS|CR|RC GET|PUT|POST|DELETE|GET_BATCH|PUT_BATCH|POST_BATCH|DELETE_BATCH <url>|<correlation-id> [<file> [mime-type]]) | (A1PMS|ICS RESPONSE <correlation-id>)
  27 # Default mime type for file is application/json unless specified in parameter mime-type
  28 # (Not for test scripts)
  29 __do_curl_to_api() {
  30         TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
  31     echo " (${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
  32         proxyflag=""
  33         if [ ! -z "$KUBE_PROXY_PATH" ]; then
  34                 if [ $KUBE_PROXY_HTTPX == "http" ]; then
  35                         proxyflag=" --proxy $KUBE_PROXY_PATH"
  36                 else
  37                         proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
  38                 fi
  39         fi
  40
  41         paramError=0
  42         input_url=$3
  43         fname=$4
  44     if [ $# -gt 0 ]; then
  45         if [ $1 == "A1PMS" ]; then
  46                         __ADAPTER=$A1PMS_ADAPTER
  47                         __ADAPTER_TYPE=$A1PMS_ADAPTER_TYPE
  48             __RETRY_CODES=$A1PMS_RETRY_CODES
  49                         if [ $A1PMS_VERSION != "V1" ]; then
  50                                 input_url=$A1PMS_API_PREFIX$3
  51                         fi
  52         elif [ $1 == "ICS" ]; then
  53                         __ADAPTER=$ICS_ADAPTER
  54                         __ADAPTER_TYPE=$ICS_ADAPTER_TYPE
  55             __RETRY_CODES=$ICS_RETRY_CODES
  56                 elif [ $1 == "CR" ]; then
  57                         __ADAPTER=$CR_ADAPTER
  58                         __ADAPTER_TYPE=$CR_ADAPTER_TYPE
  59             __RETRY_CODES=""
  60                 elif [ $1 == "RC" ]; then
  61                         __ADAPTER=$RC_ADAPTER
  62                         __ADAPTER_TYPE=$RC_ADAPTER_TYPE
  63             __RETRY_CODES=""
  64         elif [ $1 == "NGW" ]; then
  65                         __ADAPTER=$NGW_ADAPTER
  66                         __ADAPTER_TYPE=$NGW_ADAPTER_TYPE
  67             __RETRY_CODES=""
  68         elif [ $1 == "DMAAPADP" ]; then
  69                         __ADAPTER=$DMAAP_ADP_ADAPTER
  70                         __ADAPTER_TYPE=$DMAAP_ADP_ADAPTER_TYPE
  71             __RETRY_CODES=""
  72         elif [ $1 == "DMAAPMED" ]; then
  73                         __ADAPTER=$DMAAP_MED_ADAPTER
  74                         __ADAPTER_TYPE=$DMAAP_MED_ADAPTER_TYPE
  75             __RETRY_CODES=""
  76         elif [ $1 == "MRSTUB" ]; then
  77                         __ADAPTER=$MR_STUB_ADAPTER
  78                         __ADAPTER_TYPE=$MR_STUB_ADAPTER_TYPE
  79             __RETRY_CODES=""
  80         elif [ $1 == "DMAAPMR" ]; then
  81                         __ADAPTER=$MR_DMAAP_ADAPTER_HTTP
  82                         __ADAPTER_TYPE=$MR_DMAAP_ADAPTER_TYPE
  83             __RETRY_CODES=""
  84         elif [ $1 == "KAFKAPC" ]; then
  85                         __ADAPTER=$KAFKAPC_ADAPTER
  86                         __ADAPTER_TYPE=$KAFKAPC_ADAPTER_TYPE
  87             __RETRY_CODES=""
  88                 else
  89             paramError=1
  90         fi
  91                 if [ "$__ADAPTER_TYPE" == "MR-HTTP" ]; then
  92                         __ADAPTER=$MR_ADAPTER_HTTP
  93                 fi
  94                 if [ "$__ADAPTER_TYPE" == "MR-HTTPS" ]; then
  95                         __ADAPTER=$MR_ADAPTER_HTTPS
  96                 fi
  97     fi
  98     if [ $# -lt 3 ] || [ $# -gt 5 ]; then
  99                 paramError=1
 100     else
 101                 timeout=""
 102                 oper=""
 103                 file=''
 104                 httpcode=" -sw %{http_code}"
 105                 accept=''
 106                 content=''
 107                 batch=0
 108                 if [[ $2 == *"_BATCH" ]]; then
 109                         batch=1
 110                 fi
 111                 if [ $# -gt 3 ]; then
 112                         content=" -H Content-Type:application/json"
 113                         fname=$4
 114                         if [ $# -gt 4 ]; then
 115                                 content=" -H Content-Type:"$5
 116                         fi
 117                 fi
 118                 if [ $2 == "GET" ] || [ $2 == "GET_BATCH" ]; then
 119                         oper="GET"
 120                         if [ $# -ne 3 ]; then
 121                                 paramError=1
 122                         fi
 123                 elif [ $2 == "PUT" ] || [ $2 == "PUT_BATCH" ]; then
 124                         oper="PUT"
 125                         if [ $# -gt 3 ]; then
 126                                 file=" --data-binary @$fname"
 127                         fi
 128                         accept=" -H accept:application/json"
 129                 elif [ $2 == "POST" ] || [ $2 == "POST_BATCH" ]; then
 130                         oper="POST"
 131                         accept=" -H accept:*/*"
 132                         if [ $# -gt 3 ]; then
 133                                 file=" --data-binary @$fname"
 134                                 accept=" -H accept:application/json"
 135                         fi
 136                 elif [ $2 == "DELETE" ] || [ $2 == "DELETE_BATCH" ]; then
 137                         oper="DELETE"
 138                         if [ $# -ne 3 ]; then
 139                                 paramError=1
 140                         fi
 141                 elif [ $2 == "RESPONSE" ]; then
 142                         oper="RESPONSE"
 143                         if [ $# -ne 3 ]; then
 144                                 paramError=1
 145                         fi
 146                         if [ $__ADAPTER_TYPE == "REST" ]; then
 147                                 paramError=1
 148                         fi
 149                 else
 150                         paramError=1
 151                 fi
 152         fi
 153
 154     if [ $paramError -eq 1 ]; then
 155                 ((RES_CONF_FAIL++))
 156         echo "-Incorrect number of parameters to __do_curl_to_api " $@ >> $HTTPLOG
 157         echo "-Expected: (A1PMS|ICS GET|PUT|POST|DELETE|GET_BATCH|PUT_BATCH|POST_BATCH|DELETE_BATCH <url> [<file> [mime-type]]) | (A1PMS|ICS RESPONSE <correlation-id>)" >> $HTTPLOG
 158         echo "-Returning response 000" >> $HTTPLOG
 159         echo "-000"
 160         return 1
 161     fi
 162         jwt=""
 163         if [ ! -z "$KUBE_PROXY_CURL_JWT" ]; then
 164                 jwt=" -H "\""Authorization: Bearer $KUBE_PROXY_CURL_JWT"\"
 165         fi
 166         if [ $__ADAPTER_TYPE == "REST" ]; then
 167         url=" "${__ADAPTER}${input_url}
 168         oper=" -X "$oper
 169         curlString="curl -k $proxyflag "${oper}${timeout}${httpcode}${accept}${content}${url}${file}
 170         echo " CMD: $curlString $jwt" >> $HTTPLOG
 171                 if [ $# -gt 3 ]; then
 172                         echo " FILE: $(<$fname)" >> $HTTPLOG
 173                 fi
 174
 175                 # Do retry for configured response codes, otherwise only one attempt
 176                 maxretries=5
 177                 while [ $maxretries -ge 0 ]; do
 178
 179                         let maxretries=maxretries-1
 180                         if [ ! -z "$KUBE_PROXY_CURL_JWT" ]; then
 181                                 res=$($curlString -H "Authorization: Bearer $KUBE_PROXY_CURL_JWT")
 182                         else
 183                                 res=$($curlString)
 184                         fi
 185                         retcode=$?
 186                         if [ $retcode -ne 0 ]; then
 187                                 echo " RETCODE: "$retcode >> $HTTPLOG
 188                                 echo "000"
 189                                 return 1
 190                         fi
 191                         retry=0
 192                         echo " RESP: "$res >> $HTTPLOG
 193                         status=${res:${#res}-3}
 194                         if [ ! -z "${__RETRY_CODES}" ]; then
 195                                 for retrycode in $__RETRY_CODES; do
 196                                         if [ $retrycode -eq $status ]; then
 197                                                 echo -e $RED" Retrying (according to set codes for retry), got status $status....."$ERED  >> $HTTPLOG
 198                                                 sleep 1
 199                                                 retry=1
 200                                         fi
 201                                 done
 202                         fi
 203                         if [ $retry -eq 0 ]; then
 204                                 maxretries=-1
 205                         fi
 206                 done
 207         echo $res
 208         return 0
 209     else
 210                 if [ $oper != "RESPONSE" ]; then
 211                         requestUrl=$input_url
 212                         if [ $2 == "PUT" ] && [ $# -gt 3 ]; then
 213                                 payload="$(cat $fname | tr -d '\n' | tr -d ' ' )"
 214                                 echo "payload: "$payload >> $HTTPLOG
 215                                 file=" --data-binary "$payload
 216                         elif [ $# -gt 3 ]; then
 217                                 echo " FILE: $(cat $fname)" >> $HTTPLOG
 218                         fi
 219                         #urlencode the request url since it will be carried by send-request url
 220                         requestUrl=$(python3 -c "from __future__ import print_function; import urllib.parse, sys; print(urllib.parse.quote(sys.argv[1]))"  "$input_url")
 221                         url=" "${__ADAPTER}"/send-request?url="${requestUrl}"&operation="${oper}
 222                         curlString="curl -k $proxyflag -X POST${timeout}${httpcode}${content}${url}${file}"
 223                         echo " CMD: "$curlString >> $HTTPLOG
 224                         res=$($curlString)
 225                         retcode=$?
 226                         if [ $retcode -ne 0 ]; then
 227                                 echo " RETCODE: "$retcode >> $HTTPLOG
 228                                 echo "000"
 229                                 return 1
 230                         fi
 231                         echo " RESP: "$res >> $HTTPLOG
 232                         status=${res:${#res}-3}
 233                         if [ $status -ne 200 ]; then
 234                                 echo "000"
 235                                 return 1
 236                         fi
 237                         cid=${res:0:${#res}-3}
 238                         if [[ $batch -eq 1 ]]; then
 239                                 echo $cid"200"
 240                                 return 0
 241                         fi
 242                 fi
 243                 if [ $oper == "RESPONSE" ] || [ $batch -eq 0 ]; then
 244                         if [ $oper == "RESPONSE" ]; then
 245                                 cid=$3
 246                         fi
 247                         url=" "${__ADAPTER}"/receive-response?correlationid="${cid}
 248                         curlString="curl -k $proxyflag  -X GET"${timeout}${httpcode}${url}
 249                         echo " CMD: "$curlString >> $HTTPLOG
 250                         res=$($curlString)
 251                         retcode=$?
 252                         if [ $retcode -ne 0 ]; then
 253                                 echo " RETCODE: "$retcode >> $HTTPLOG
 254                                 echo "000"
 255                                 return 1
 256                         fi
 257                         echo " RESP: "$res >> $HTTPLOG
 258                         status=${res:${#res}-3}
 259                         TS=$SECONDS
 260                         # wait of the reply from the A1PMS/ICS...
 261                         while [ $status -eq 204 ]; do
 262                                 if [ $(($SECONDS - $TS)) -gt 90 ]; then
 263                                         echo " RETCODE: (timeout after 90s)" >> $HTTPLOG
 264                                         echo "000"
 265                                         return 1
 266                                 fi
 267                                 sleep 0.01
 268                                 echo " CMD: "$curlString >> $HTTPLOG
 269                                 res=$($curlString)
 270                                 if [ $retcode -ne 0 ]; then
 271                                         echo " RETCODE: "$retcode >> $HTTPLOG
 272                                         echo "000"
 273                                         return 1
 274                                 fi
 275                                 echo " RESP: "$res >> $HTTPLOG
 276                                 status=${res:${#res}-3}
 277                         done
 278                         if [ $status -eq 200 ]; then
 279                                 body=${res:0:${#res}-3}
 280                                 echo $body
 281                                 return 0
 282                         fi
 283                         echo "Status not 200, returning response 000" >> $HTTPLOG
 284                         echo "0000"
 285                         return 1
 286                 fi
 287     fi
 288 }