test/common/agent_api_functions.sh

   1 #!/bin/bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 # This is a script that contains specific test functions for Policy Agent API
  21
  22 ### API functiond towards the Policy Agent
  23
  24 . ../common/api_curl.sh
  25
  26 #########################################################
  27 #### Test case functions A1 Policy management service
  28 #########################################################
  29
  30 # This function compare the size, towards a target value, of a json array returned from <url> of the Policy Agent.
  31 # This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
  32 # args: json:<url> <target-value> [<timeout-in-seconds]
  33 # (Function for test scripts)
  34 api_equal() {
  35     echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
  36         if [ $# -eq 2 ] || [ $# -eq 3 ]; then
  37                 if [[ $1 == "json:"* ]]; then
  38                         __var_test "Policy Agent" $LOCALHOST$POLICY_AGENT_EXTERNAL_PORT"/" $1 "=" $2 $3
  39                         return 0
  40                 fi
  41         fi
  42
  43         ((RES_CONF_FAIL++))
  44         __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
  45         return 1
  46 }
  47
  48 # API Test function: GET /policies
  49 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-ype-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
  50 # (Function for test scripts)
  51 api_get_policies() {
  52         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
  53     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
  54         ((RES_TEST++))
  55         paramError=0
  56         if [ $# -lt 4 ]; then
  57                 paramError=1
  58         elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
  59                 paramError=1
  60         elif [ $# -gt 4 ] && [ $(($#%5)) -ne 4 ]; then
  61                 paramError=1
  62         fi
  63
  64     if [ $paramError -ne 0 ]; then
  65         __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
  66         return 1
  67     fi
  68         queryparams=""
  69         if [ $2 != "NORIC" ]; then
  70                 queryparams="?ric="$2
  71         fi
  72         if [ $3 != "NOSERVICE" ]; then
  73                 if [ -z $queryparams ]; then
  74                         queryparams="?service="$3
  75                 else
  76                         queryparams=$queryparams"&service="$3
  77                 fi
  78         fi
  79         if [ $4 != "NOTYPE" ]; then
  80                 if [ -z $queryparams ]; then
  81                         queryparams="?type="$4
  82                 else
  83                         queryparams=$queryparams"&type="$4
  84                 fi
  85         fi
  86
  87         query="/policies"$queryparams
  88     res="$(__do_curl_to_api PA GET $query)"
  89     status=${res:${#res}-3}
  90
  91         if [ $status -ne $1 ]; then
  92                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
  93                 ((RES_FAIL++))
  94                 __check_stop_at_error
  95                 return 1
  96         fi
  97
  98         if [ $# -gt 4 ]; then
  99                 if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
 100                         targetJson="["
 101                 else
 102                         body=${res:0:${#res}-3}
 103                         targetJson="["
 104                         arr=(${@:5})
 105
 106                         for ((i=0; i<$(($#-4)); i=i+5)); do
 107
 108                                 if [ "$targetJson" != "[" ]; then
 109                                         targetJson=$targetJson","
 110                                 fi
 111                                 targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
 112                                 if [ "${arr[$i+3]}" == "EMPTY" ]; then
 113                                         targetJson=$targetJson"\"\","
 114                                 else
 115                                         targetJson=$targetJson"\"${arr[$i+3]}\","
 116                                 fi
 117                                 file=".p.json"
 118                                 sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
 119                                 json=$(cat $file)
 120                                 targetJson=$targetJson"\"json\":"$json"}"
 121                         done
 122                 fi
 123
 124                 targetJson=$targetJson"]"
 125                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 126                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 127
 128                 if [ $res -ne 0 ]; then
 129                         echo -e $RED" FAIL, returned body not correct"$ERED
 130                         ((RES_FAIL++))
 131                         __check_stop_at_error
 132                         return 1
 133                 fi
 134         fi
 135
 136         ((RES_PASS++))
 137         echo -e $GREEN" PASS"$EGREEN
 138         return 0
 139
 140 }
 141
 142 # API Test function: GET /policy
 143 #args: <response-code>  <policy-id> [<template-file>]
 144 # (Function for test scripts)
 145 api_get_policy() {
 146         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 147     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 148         ((RES_TEST++))
 149
 150     if [ $# -lt 2 ] || [ $# -gt 3 ]; then
 151         __print_err "<response-code>  <policy-id> [<template-file>] " $@
 152         return 1
 153     fi
 154
 155         query="/policy?id=$UUID$2"
 156         res="$(__do_curl_to_api PA GET $query)"
 157         status=${res:${#res}-3}
 158
 159         if [ $status -ne $1 ]; then
 160                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 161                 ((RES_FAIL++))
 162                 __check_stop_at_error
 163                 return 1
 164         fi
 165
 166         if [ $# -eq 3 ]; then
 167                 #Create a policy json to compare with
 168                 body=${res:0:${#res}-3}
 169                 file=".p.json"
 170                 sed 's/XXX/'${2}'/g' $3 > $file
 171                 targetJson=$(< $file)
 172                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 173                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 174                 if [ $res -ne 0 ]; then
 175                         echo -e $RED" FAIL, returned body not correct"$ERED
 176                         ((RES_FAIL++))
 177                         __check_stop_at_error
 178                         return 1
 179                 fi
 180         fi
 181
 182         ((RES_PASS++))
 183         echo -e $GREEN" PASS"$EGREEN
 184         return 0
 185 }
 186
 187 # API Test function: PUT /policy
 188 # args: <response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient> <template-file> [<count>]
 189 # (Function for test scripts)
 190 api_put_policy() {
 191         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 192     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 193         ((RES_TEST++))
 194
 195     if [ $# -lt 7 ] || [ $# -gt 8 ]; then
 196         __print_err "<response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@
 197         return 1
 198     fi
 199
 200         ric=$3
 201         count=0
 202         max=1
 203
 204         if [ $# -eq 8 ]; then
 205                 max=$8
 206         fi
 207
 208         pid=$5
 209         file=$7
 210
 211         while [ $count -lt $max ]; do
 212                 query="/policy?id=$UUID$pid&ric=$ric&service=$2"
 213
 214                 if [ $4 != "NOTYPE" ]; then
 215                         query=$query"&type=$4"
 216                 fi
 217
 218                 if [ $6 != NOTRANSIENT ]; then
 219                         query=$query"&transient=$6"
 220                 fi
 221
 222                 file=".p.json"
 223                 sed 's/XXX/'${pid}'/g' $7 > $file
 224         res="$(__do_curl_to_api PA PUT $query $file)"
 225         status=${res:${#res}-3}
 226                 echo -ne " Executing "$count"("$max")${SAMELINE}"
 227                 if [ $status -ne $1 ]; then
 228                         echo " Executed "$count"?("$max")"
 229                         echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 230                         ((RES_FAIL++))
 231                         __check_stop_at_error
 232                         return 1
 233                 fi
 234
 235                 let pid=$pid+1
 236                 let count=$count+1
 237                 echo -ne " Executed  "$count"("$max")${SAMELINE}"
 238         done
 239         echo ""
 240
 241         ((RES_PASS++))
 242         echo -e $GREEN" PASS"$EGREEN
 243         return 0
 244 }
 245
 246 # API Test function: PUT /policy to run in batch
 247 # args: <response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient> <template-file> [<count>]
 248 # (Function for test scripts)
 249 api_put_policy_batch() {
 250         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 251     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 252         ((RES_TEST++))
 253
 254     if [ $# -lt 7 ] || [ $# -gt 8 ]; then
 255         __print_err "<response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient> <template-file> [<count>]" $@
 256         return 1
 257     fi
 258
 259         ric=$3
 260         count=0
 261         max=1
 262
 263         if [ $# -eq 8 ]; then
 264                 max=$8
 265         fi
 266
 267         pid=$5
 268         file=$7
 269         ARR=""
 270         while [ $count -lt $max ]; do
 271                 query="/policy?id=$UUID$pid&ric=$ric&service=$2"
 272
 273                 if [ $4 != "NOTYPE" ]; then
 274                         query=$query"&type=$4"
 275                 fi
 276
 277                 if [ $6 != NOTRANSIENT ]; then
 278                         query=$query"&transient=$6"
 279                 fi
 280
 281                 file=".p.json"
 282                 sed 's/XXX/'${pid}'/g' $7 > $file
 283         res="$(__do_curl_to_api PA PUT_BATCH $query $file)"
 284         status=${res:${#res}-3}
 285                 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
 286
 287                 if [ $status -ne 200 ]; then
 288                         echo " Requested(batch) "$count"?("$max")"
 289                         echo -e $RED" FAIL. Exepected status 200 (in request), got "$status $ERED
 290                         ((RES_FAIL++))
 291                         __check_stop_at_error
 292                         return 1
 293                 fi
 294                 cid=${res:0:${#res}-3}
 295                 ARR=$ARR" "$cid
 296                 let pid=$pid+1
 297                 let count=$count+1
 298                 echo -ne " Requested(batch)  "$count"("$max")${SAMELINE}"
 299         done
 300
 301         echo ""
 302         count=0
 303         for cid in $ARR; do
 304
 305         res="$(__do_curl_to_api PA RESPONSE $cid)"
 306         status=${res:${#res}-3}
 307                 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
 308
 309                 if [ $status -ne $1 ]; then
 310                         echo " Requested(batch) "$count"?("$max")"
 311                         echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 312                         ((RES_FAIL++))
 313                         __check_stop_at_error
 314                         return 1
 315                 fi
 316
 317                 let count=$count+1
 318                 echo -ne " Requested(batch)  "$count"("$max")${SAMELINE}"
 319         done
 320
 321         echo ""
 322
 323         ((RES_PASS++))
 324         echo -e $GREEN" PASS"$EGREEN
 325         return 0
 326 }
 327
 328 # API Test function: PUT /policy to run in i parallel for a number of rics
 329 # args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
 330 # (Function for test scripts)
 331 api_put_policy_parallel() {
 332         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 333     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 334         ((RES_TEST++))
 335
 336     if [ $# -ne 10 ]; then
 337         __print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@
 338         return 1
 339     fi
 340         resp_code=$1; shift;
 341         serv=$1; shift
 342         ric_base=$1; shift;
 343         num_rics=$1; shift;
 344         type=$1; shift;
 345         start_id=$1; shift;
 346         transient=$1; shift;
 347         template=$1; shift;
 348         count=$1; shift;
 349         pids=$1; shift;
 350
 351         if [ $ADAPTER != $RESTBASE ] && [ $ADAPTER != $RESTBASE_SECURE ]; then
 352                 echo " Info - api_put_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported"
 353                 echo " Info - will execute over agent REST"
 354         fi
 355
 356         if [ $serv == "NOSERVICE" ]; then
 357                 serv=""
 358         fi
 359         query="/policy?service=$serv"
 360
 361         if [ $type != "NOTYPE" ]; then
 362                 query=$query"&type=$type"
 363         fi
 364
 365         if [ $transient != NOTRANSIENT ]; then
 366                 query=$query"&transient=$transient"
 367         fi
 368
 369         urlbase=${ADAPTER}${query}
 370
 371         for ((i=1; i<=$pids; i++))
 372         do
 373                 uuid=$UUID
 374                 if [ -z "$uuid" ]; then
 375                         uuid="NOUUID"
 376                 fi
 377                 echo "" > ".pid${i}.res.txt"
 378                 echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i > ".pid${i}.txt"
 379                 echo $i
 380         done  | xargs -n 1 -I{} -P $pids bash -c '{
 381                 arg=$(echo {})
 382                 echo " Parallel process $arg started"
 383                 tmp=$(< ".pid${arg}.txt")
 384                 python3 ../common/create_policies_process.py $tmp > .pid${arg}.res.txt
 385         }'
 386         msg=""
 387         for ((i=1; i<=$pids; i++))
 388         do
 389                 file=".pid${i}.res.txt"
 390                 tmp=$(< $file)
 391                 if [ -z "$tmp" ]; then
 392                         echo " Process $i : unknown result (result file empty"
 393                         msg="failed"
 394                 else
 395                         res=${tmp:0:1}
 396                         if [ $res == "0" ]; then
 397                                 echo " Process $i : OK"
 398                         else
 399                                 echo " Process $i : failed - "${tmp:1}
 400                                 msg="failed"
 401                         fi
 402                 fi
 403         done
 404         if [ -z $msg ]; then
 405                 echo " $(($count*$num_rics)) policy request(s) executed"
 406                 ((RES_PASS++))
 407                 echo -e $GREEN" PASS"$EGREEN
 408                 return 0
 409         fi
 410
 411         echo -e $RED" FAIL. One of more processes failed to execute" $ERED
 412         ((RES_FAIL++))
 413         __check_stop_at_error
 414         return 1
 415 }
 416
 417 # API Test function: DELETE /policy
 418 # args: <response-code> <policy-id> [count]
 419 # (Function for test scripts)
 420 api_delete_policy() {
 421         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 422     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 423         ((RES_TEST++))
 424
 425     if [ $# -lt 2 ] || [ $# -gt 3 ]; then
 426         __print_err "<response-code> <policy-id> [count]" $@
 427         return 1
 428     fi
 429
 430         count=0
 431         max=1
 432
 433         if [ $# -eq 3 ]; then
 434                 max=$3
 435         fi
 436
 437         pid=$2
 438
 439         while [ $count -lt $max ]; do
 440                 query="/policy?id="$UUID$pid
 441                 res="$(__do_curl_to_api PA DELETE $query)"
 442                 status=${res:${#res}-3}
 443                 echo -ne " Executing "$count"("$max")${SAMELINE}"
 444
 445                 if [ $status -ne $1 ]; then
 446                         echo " Executed "$count"?("$max")"
 447                         echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 448                         ((RES_FAIL++))
 449                         __check_stop_at_error
 450                         return 1
 451                 fi
 452                 let pid=$pid+1
 453                 let count=$count+1
 454                 echo -ne " Executed  "$count"("$max")${SAMELINE}"
 455         done
 456         echo ""
 457
 458         ((RES_PASS++))
 459         echo -e $GREEN" PASS"$EGREEN
 460         return 0
 461 }
 462
 463 # API Test function: DELETE /policy to run in batch
 464 # args: <response-code> <policy-id> [count]
 465 # (Function for test scripts)
 466 api_delete_policy_batch() {
 467         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 468     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 469         ((RES_TEST++))
 470
 471     if [ $# -lt 2 ] || [ $# -gt 3 ]; then
 472         __print_err "<response-code> <policy-id> [count]" $@
 473         return 1
 474     fi
 475
 476         count=0
 477         max=1
 478
 479         if [ $# -eq 3 ]; then
 480                 max=$3
 481         fi
 482
 483         pid=$2
 484         ARR=""
 485         while [ $count -lt $max ]; do
 486                 query="/policy?id="$UUID$pid
 487                 res="$(__do_curl_to_api PA DELETE_BATCH $query)"
 488                 status=${res:${#res}-3}
 489                 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
 490
 491                 if [ $status -ne 200 ]; then
 492                         echo " Requested(batch) "$count"?("$max")"
 493                         echo -e $RED" FAIL. Exepected status 200 (in request), got "$status $ERED
 494                         ((RES_FAIL++))
 495                         __check_stop_at_error
 496                         return 1
 497                 fi
 498                 cid=${res:0:${#res}-3}
 499                 ARR=$ARR" "$cid
 500                 let pid=$pid+1
 501                 let count=$count+1
 502                 echo -ne " Requested(batch)  "$count"("$max")${SAMELINE}"
 503         done
 504
 505         echo ""
 506
 507         count=0
 508         for cid in $ARR; do
 509
 510         res="$(__do_curl_to_api PA RESPONSE $cid)"
 511         status=${res:${#res}-3}
 512                 echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}"
 513
 514                 if [ $status -ne $1 ]; then
 515                         echo " Deleted(batch) "$count"?("$max")"
 516                         echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 517                         ((RES_FAIL++))
 518                         __check_stop_at_error
 519                         return 1
 520                 fi
 521
 522                 let count=$count+1
 523                 echo -ne " Deleted(batch)  "$count"("$max")${SAMELINE}"
 524         done
 525
 526         ((RES_PASS++))
 527         echo -e $GREEN" PASS"$EGREEN
 528         return 0
 529 }
 530
 531 # API Test function: DELETE /policy to run in i parallel for a number of rics
 532 # args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
 533 # (Function for test scripts)
 534 api_delete_policy_parallel() {
 535         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 536     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 537         ((RES_TEST++))
 538
 539     if [ $# -ne 5 ]; then
 540         __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@
 541         return 1
 542     fi
 543         resp_code=$1; shift;
 544         num_rics=$1; shift;
 545         start_id=$1; shift;
 546         count=$1; shift;
 547         pids=$1; shift;
 548
 549         if [ $ADAPTER != $RESTBASE ] && [ $ADAPTER != $RESTBASE_SECURE ]; then
 550                 echo " Info - api_delete_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported"
 551                 echo " Info - will execute over agent REST"
 552         fi
 553
 554         query="/policy"
 555
 556         urlbase=${ADAPTER}${query}
 557
 558         for ((i=1; i<=$pids; i++))
 559         do
 560                 uuid=$UUID
 561                 if [ -z "$uuid" ]; then
 562                         uuid="NOUUID"
 563                 fi
 564                 echo "" > ".pid${i}.del.res.txt"
 565                 echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i > ".pid${i}.del.txt"
 566                 echo $i
 567         done  | xargs -n 1 -I{} -P $pids bash -c '{
 568                 arg=$(echo {})
 569                 echo " Parallel process $arg started"
 570                 tmp=$(< ".pid${arg}.del.txt")
 571                 python3 ../common/delete_policies_process.py $tmp > .pid${arg}.del.res.txt
 572         }'
 573         msg=""
 574         for ((i=1; i<=$pids; i++))
 575         do
 576                 file=".pid${i}.del.res.txt"
 577                 tmp=$(< $file)
 578                 if [ -z "$tmp" ]; then
 579                         echo " Process $i : unknown result (result file empty"
 580                         msg="failed"
 581                 else
 582                         res=${tmp:0:1}
 583                         if [ $res == "0" ]; then
 584                                 echo " Process $i : OK"
 585                         else
 586                                 echo " Process $i : failed - "${tmp:1}
 587                                 msg="failed"
 588                         fi
 589                 fi
 590         done
 591         if [ -z $msg ]; then
 592                 echo " $(($count*$num_rics)) policy request(s) executed"
 593                 ((RES_PASS++))
 594                 echo -e $GREEN" PASS"$EGREEN
 595                 return 0
 596         fi
 597
 598         echo -e $RED" FAIL. One of more processes failed to execute" $ERED
 599         ((RES_FAIL++))
 600         __check_stop_at_error
 601         return 1
 602 }
 603
 604 # API Test function: GET /policy_ids
 605 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
 606 # (Function for test scripts)
 607 api_get_policy_ids() {
 608         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 609     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 610         ((RES_TEST++))
 611
 612     if [ $# -lt 4 ]; then
 613                 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
 614                 return 1
 615         fi
 616
 617         queryparams=""
 618
 619         if [ $2 != "NORIC" ]; then
 620                 queryparams="?ric="$2
 621         fi
 622
 623         if [ $3 != "NOSERVICE" ]; then
 624                 if [ -z $queryparams ]; then
 625                         queryparams="?service="$3
 626                 else
 627                         queryparams=$queryparams"&service="$3
 628                 fi
 629         fi
 630         if [ $4 != "NOTYPE" ]; then
 631                 if [ -z $queryparams ]; then
 632                         queryparams="?type="$4
 633                 else
 634                         queryparams=$queryparams"&type="$4
 635                 fi
 636         fi
 637
 638         query="/policy_ids"$queryparams
 639     res="$(__do_curl_to_api PA GET $query)"
 640     status=${res:${#res}-3}
 641
 642         if [ $status -ne $1 ]; then
 643                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 644                 ((RES_FAIL++))
 645                 __check_stop_at_error
 646                 return 1
 647         fi
 648
 649         if [ $# -gt 4 ]; then
 650                 body=${res:0:${#res}-3}
 651                 targetJson="["
 652
 653                 for pid in ${@:5} ; do
 654                         if [ "$targetJson" != "[" ]; then
 655                                 targetJson=$targetJson","
 656                         fi
 657                         if [ $pid != "NOID" ]; then
 658                                 targetJson=$targetJson"\"$UUID$pid\""
 659                         fi
 660                 done
 661
 662                 targetJson=$targetJson"]"
 663                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 664                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 665
 666                 if [ $res -ne 0 ]; then
 667                         echo -e $RED" FAIL, returned body not correct"$ERED
 668                         ((RES_FAIL++))
 669                         __check_stop_at_error
 670                         return 1
 671                 fi
 672         fi
 673
 674         ((RES_PASS++))
 675         echo -e $GREEN" PASS"$EGREEN
 676         return 0
 677 }
 678
 679 # API Test function: GET /policy_schema
 680 # args: <response-code> <policy-type-id> [<schema-file>]
 681 # (Function for test scripts)
 682 api_get_policy_schema() {
 683         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 684     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 685         ((RES_TEST++))
 686
 687     if [ $# -lt 2 ] || [ $# -gt 3 ]; then
 688         __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
 689         return 1
 690     fi
 691
 692         query="/policy_schema?id=$2"
 693         res="$(__do_curl_to_api PA GET $query)"
 694         status=${res:${#res}-3}
 695
 696         if [ $status -ne $1 ]; then
 697                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 698                 ((RES_FAIL++))
 699                 __check_stop_at_error
 700                 return 1
 701         fi
 702
 703         if [ $# -eq 3 ]; then
 704
 705                 body=${res:0:${#res}-3}
 706
 707                 targetJson=$(< $3)
 708                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 709                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 710
 711                 if [ $res -ne 0 ]; then
 712                         echo -e $RED" FAIL, returned body not correct"$ERED
 713                         ((RES_FAIL++))
 714                         __check_stop_at_error
 715                         return 1
 716                 fi
 717         fi
 718
 719         ((RES_PASS++))
 720         echo -e $GREEN" PASS"$EGREEN
 721         return 0
 722 }
 723
 724 # API Test function: GET /policy_schemas
 725 # args: <response-code>  <ric-id>|NORIC [<schema-file>|NOFILE]*
 726 # (Function for test scripts)
 727 api_get_policy_schemas() {
 728         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 729     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 730         ((RES_TEST++))
 731
 732     if [ $# -lt 2 ]; then
 733         __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
 734         return 1
 735     fi
 736
 737         query="/policy_schemas"
 738         if [ $2 != "NORIC" ]; then
 739                 query=$query"?ric="$2
 740         fi
 741
 742         res="$(__do_curl_to_api PA GET $query)"
 743         status=${res:${#res}-3}
 744
 745         if [ $status -ne $1 ]; then
 746                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 747                 ((RES_FAIL++))
 748                 __check_stop_at_error
 749                 return 1
 750         fi
 751
 752         if [ $# -gt 2 ]; then
 753                 body=${res:0:${#res}-3}
 754                 targetJson="["
 755
 756                 for file in ${@:3} ; do
 757                         if [ "$targetJson" != "[" ]; then
 758                                 targetJson=$targetJson","
 759                         fi
 760                         if [ $file == "NOFILE" ]; then
 761                                 targetJson=$targetJson"{}"
 762                         else
 763                                 targetJson=$targetJson$(< $file)
 764                         fi
 765                 done
 766
 767                 targetJson=$targetJson"]"
 768                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 769                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 770
 771                 if [ $res -ne 0 ]; then
 772                         echo -e $RED" FAIL, returned body not correct"$ERED
 773                         ((RES_FAIL++))
 774                         __check_stop_at_error
 775                         return 1
 776                 fi
 777         fi
 778
 779         ((RES_PASS++))
 780         echo -e $GREEN" PASS"$EGREEN
 781         return 0
 782 }
 783
 784 # API Test function: GET /policy_status
 785 # arg: <response-code> <policy-id> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)
 786 # (Function for test scripts)
 787 api_get_policy_status() {
 788         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 789     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 790         ((RES_TEST++))
 791     if [ $# -lt 4 ] || [ $# -gt 5 ]; then
 792                 __print_err "<response-code> <policy-id> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
 793                 return 1
 794         fi
 795
 796         targetJson=""
 797
 798         if [ $3 == "STD" ]; then
 799                 targetJson="{\"enforceStatus\":\"$4\""
 800                 if [ $# -eq 5 ]; then
 801                         targetJson=$targetJson",\"reason\":\"$5\""
 802                 fi
 803                 targetJson=$targetJson"}"
 804         elif [ $3 == "OSC" ]; then
 805                 targetJson="{\"instance_status\":\"$4\""
 806                 if [ $# -eq 5 ]; then
 807                         targetJson=$targetJson",\"has_been_deleted\":\"$5\""
 808                 fi
 809                 targetJson=$targetJson",\"created_at\":\"????\"}"
 810         else
 811                 __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
 812                 return 1
 813         fi
 814
 815         query="/policy_status?id="$UUID$2
 816
 817         res="$(__do_curl_to_api PA GET $query)"
 818     status=${res:${#res}-3}
 819
 820         if [ $status -ne $1 ]; then
 821                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 822                 ((RES_FAIL++))
 823                 __check_stop_at_error
 824                 return 1
 825         fi
 826
 827         echo "TARGET JSON: $targetJson" >> $HTTPLOG
 828         body=${res:0:${#res}-3}
 829         res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 830
 831         if [ $res -ne 0 ]; then
 832                 echo -e $RED" FAIL, returned body not correct"$ERED
 833                 ((RES_FAIL++))
 834                 __check_stop_at_error
 835                 return 1
 836         fi
 837
 838         ((RES_PASS++))
 839         echo -e $GREEN" PASS"$EGREEN
 840         return 0
 841 }
 842
 843 # API Test function: GET /policy_types
 844 # args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
 845 # (Function for test scripts)
 846 api_get_policy_types() {
 847         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 848     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 849         ((RES_TEST++))
 850
 851     if [ $# -lt 1 ]; then
 852                 __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
 853                 return 1
 854         fi
 855
 856         if [ $# -eq 1 ]; then
 857                 query="/policy_types"
 858         elif [ $2 == "NORIC" ]; then
 859                 query="/policy_types"
 860         else
 861                 query="/policy_types?ric=$2"
 862         fi
 863
 864     res="$(__do_curl_to_api PA GET $query)"
 865     status=${res:${#res}-3}
 866
 867         if [ $status -ne $1 ]; then
 868                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 869                 ((RES_FAIL++))
 870                 __check_stop_at_error
 871                 return 1
 872         fi
 873
 874         if [ $# -gt 2 ]; then
 875                 body=${res:0:${#res}-3}
 876                 targetJson="["
 877
 878                 for pid in ${@:3} ; do
 879                         if [ "$targetJson" != "[" ]; then
 880                                 targetJson=$targetJson","
 881                         fi
 882                         if [ $pid == "EMPTY" ]; then
 883                                 pid=""
 884                         fi
 885                         targetJson=$targetJson"\"$pid\""
 886                 done
 887
 888                 targetJson=$targetJson"]"
 889                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
 890                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
 891
 892                 if [ $res -ne 0 ]; then
 893                         echo -e $RED" FAIL, returned body not correct"$ERED
 894                         ((RES_FAIL++))
 895                         __check_stop_at_error
 896                         return 1
 897                 fi
 898         fi
 899
 900         ((RES_PASS++))
 901         echo -e $GREEN" PASS"$EGREEN
 902         return 0
 903 }
 904
 905 #########################################################
 906 #### Test case functions Health check
 907 #########################################################
 908
 909 # API Test function: GET /status
 910 # args: <response-code>
 911 # (Function for test scripts)
 912 api_get_status() {
 913         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 914     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 915         ((RES_TEST++))
 916     if [ $# -ne 1 ]; then
 917                 __print_err "<response-code>" $@
 918                 return 1
 919         fi
 920     query="/status"
 921     res="$(__do_curl_to_api PA GET $query)"
 922     status=${res:${#res}-3}
 923
 924         if [ $status -ne $1 ]; then
 925                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 926                 ((RES_FAIL++))
 927                 __check_stop_at_error
 928                 return 1
 929         fi
 930
 931         ((RES_PASS++))
 932         echo -e $GREEN" PASS"$EGREEN
 933         return 0
 934 }
 935
 936 #########################################################
 937 #### Test case functions RIC Repository
 938 #########################################################
 939
 940 # API Test function: GET /ric
 941 # args: <reponse-code> <management-element-id> [<ric-id>]
 942 # (Function for test scripts)
 943 api_get_ric() {
 944         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 945     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 946         ((RES_TEST++))
 947     if [ $# -lt 2 ] || [ $# -gt 3 ]; then
 948                 __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
 949                 return 1
 950         fi
 951
 952         query="/ric?managedElementId="$2
 953
 954     res="$(__do_curl_to_api PA GET $query)"
 955     status=${res:${#res}-3}
 956
 957         if [ $status -ne $1 ]; then
 958                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
 959                 ((RES_FAIL++))
 960                 __check_stop_at_error
 961                 return 1
 962         fi
 963
 964         if [ $# -eq 3 ]; then
 965                 body=${res:0:${#res}-3}
 966                 if [ "$body" != "$3" ]; then
 967                         echo -e $RED" FAIL, returned body not correct"$ERED
 968                         ((RES_FAIL++))
 969                         __check_stop_at_error
 970                         return 1
 971                 fi
 972         fi
 973
 974         ((RES_PASS++))
 975         echo -e $GREEN" PASS"$EGREEN
 976         return 0
 977 }
 978
 979 # API test function: GET /rics
 980 # args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
 981 # example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
 982 # format of ric-info:  <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
 983 # (Function for test scripts)
 984 api_get_rics() {
 985         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
 986     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
 987         ((RES_TEST++))
 988
 989     if [ $# -lt 2 ]; then
 990                 __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
 991                 return 1
 992         fi
 993
 994         query="/rics"
 995         if [ $2 != "NOTYPE" ]; then
 996         query="/rics?policyType="$2
 997         fi
 998
 999     res="$(__do_curl_to_api PA GET $query)"
1000     status=${res:${#res}-3}
1001
1002         if [ $status -ne $1 ]; then
1003                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1004                 ((RES_FAIL++))
1005                 __check_stop_at_error
1006                 return 1
1007         fi
1008
1009         if [ $# -gt 2 ]; then
1010                 body=${res:0:${#res}-3}
1011                 res=$(python3 ../common/create_rics_json.py ".tmp_rics.json" "$3" )
1012                 if [ $res -ne 0 ]; then
1013                         echo -e $RED" FAIL, could not create target ric info json"$ERED
1014                         ((RES_FAIL++))
1015                         __check_stop_at_error
1016                         return 1
1017                 fi
1018
1019                 targetJson=$(<.tmp_rics.json)
1020         echo "TARGET JSON: $targetJson" >> $HTTPLOG
1021                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1022                 if [ $res -ne 0 ]; then
1023                         echo -e $RED" FAIL, returned body not correct"$ERED
1024                         ((RES_FAIL++))
1025                         __check_stop_at_error
1026                         return 1
1027                 fi
1028         fi
1029
1030         ((RES_PASS++))
1031         echo -e $GREEN" PASS"$EGREEN
1032         return 0
1033 }
1034
1035 ##################################################################
1036 #### API Test case functions Service registry and supervision ####
1037 ##################################################################
1038
1039 # API test function: PUT /service
1040 # args: <response-code>  <service-name> <keepalive-timeout> <callbackurl>
1041 # (Function for test scripts)
1042 api_put_service() {
1043         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
1044     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
1045         ((RES_TEST++))
1046     if [ $# -ne 4 ]; then
1047         __print_err "<response-code>  <service-name> <keepalive-timeout> <callbackurl>" $@
1048         return 1
1049     fi
1050
1051     query="/service"
1052     json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
1053     file=".tmp.json"
1054         echo "$json" > $file
1055
1056     res="$(__do_curl_to_api PA PUT $query $file)"
1057     status=${res:${#res}-3}
1058
1059         if [ $status -ne $1 ]; then
1060                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1061                 ((RES_FAIL++))
1062                 __check_stop_at_error
1063                 return 1
1064         fi
1065
1066         ((RES_PASS++))
1067         echo -e $GREEN" PASS"$EGREEN
1068         return 0
1069 }
1070
1071 # API test function: GET /services
1072 #args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
1073 # (Function for test scripts)
1074 api_get_services() {
1075         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
1076     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
1077         ((RES_TEST++))
1078         #Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
1079         paramError=1
1080         if [ $# -eq 1 ]; then
1081                 paramError=0
1082         elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
1083                 paramError=0
1084         elif [ $# -eq 5 ]; then
1085                 paramError=0
1086         elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
1087                 argLen=$(($#-2))
1088                 if [ $(($argLen%3)) -eq 0 ]; then
1089                         paramError=0
1090                 fi
1091         fi
1092
1093     if [ $paramError -ne 0 ]; then
1094                 __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
1095                 return 1
1096         fi
1097
1098     query="/services"
1099
1100     if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
1101         query="/services?name="$2
1102         fi
1103
1104     res="$(__do_curl_to_api PA GET $query)"
1105     status=${res:${#res}-3}
1106
1107         if [ $status -ne $1 ]; then
1108                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1109                 ((RES_FAIL++))
1110                 __check_stop_at_error
1111                 return 1
1112         fi
1113
1114         if [ $# -gt 2 ]; then
1115                 variableArgCount=$(($#-2))
1116                 body=${res:0:${#res}-3}
1117         targetJson="["
1118                 shift; shift;
1119                 cntr=0
1120                 while [ $cntr -lt $variableArgCount ]; do
1121                         servicename=$1; shift;
1122                         timeout=$1; shift;
1123                         callback=$1; shift;
1124                         if [ $cntr -gt 0 ]; then
1125                                 targetJson=$targetJson","
1126                         fi
1127                         # timeSinceLastActivitySeconds value cannot be checked since value varies
1128                         targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
1129                         let cntr=cntr+3
1130                 done
1131                 targetJson=$targetJson"]"
1132                 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1133                 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1134                 if [ $res -ne 0 ]; then
1135                         echo -e $RED" FAIL, returned body not correct"$ERED
1136                         ((RES_FAIL++))
1137                         __check_stop_at_error
1138                         return 1
1139                 fi
1140         fi
1141
1142         ((RES_PASS++))
1143         echo -e $GREEN" PASS"$EGREEN
1144         return 0
1145 }
1146
1147 # API test function: GET /services  (only checking service names)
1148 # args: <response-code> [<service-name>]*"
1149 # (Function for test scripts)
1150 api_get_service_ids() {
1151         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
1152     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
1153         ((RES_TEST++))
1154
1155     if [ $# -lt 1 ]; then
1156                 __print_err "<response-code> [<service-name>]*" $@
1157                 return 1
1158         fi
1159
1160     query="/services"
1161     res="$(__do_curl_to_api PA GET $query)"
1162     status=${res:${#res}-3}
1163
1164         if [ $status -ne $1 ]; then
1165                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1166                 ((RES_FAIL++))
1167                 __check_stop_at_error
1168                 return 1
1169         fi
1170
1171         body=${res:0:${#res}-3}
1172         targetJson="["
1173         for rapp in ${@:2} ; do
1174                 if [ "$targetJson" != "[" ]; then
1175                         targetJson=$targetJson","
1176                 fi
1177                 targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
1178         done
1179
1180         targetJson=$targetJson"]"
1181         echo "TARGET JSON: $targetJson" >> $HTTPLOG
1182         res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1183
1184         if [ $res -ne 0 ]; then
1185                 echo -e $RED" FAIL, returned body not correct"$ERED
1186                 ((RES_FAIL++))
1187                 __check_stop_at_error
1188                 return 1
1189         fi
1190
1191         ((RES_PASS++))
1192         echo -e $GREEN" PASS"$EGREEN
1193         return 0
1194 }
1195
1196 # API test function: DELETE /services
1197 # args: <response-code> <service-name>
1198 # (Function for test scripts)
1199 api_delete_services() {
1200         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
1201     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
1202         ((RES_TEST++))
1203
1204     if [ $# -ne 2 ]; then
1205                 __print_err "<response-code> <service-name>" $@
1206                 return 1
1207         fi
1208
1209     query="/services?name="$2
1210     res="$(__do_curl_to_api PA DELETE $query)"
1211     status=${res:${#res}-3}
1212
1213         if [ $status -ne $1 ]; then
1214                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1215                 ((RES_FAIL++))
1216                 __check_stop_at_error
1217                 return 1
1218         fi
1219
1220         ((RES_PASS++))
1221         echo -e $GREEN" PASS"$EGREEN
1222         return 0
1223 }
1224
1225 # API test function: PUT /services/keepalive
1226 # args: <response-code> <service-name>
1227 # (Function for test scripts)
1228 api_put_services_keepalive() {
1229         echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD
1230     echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
1231         ((RES_TEST++))
1232
1233     if [ $# -ne 2 ]; then
1234                 __print_err "<response-code> <service-name>" $@
1235                 return 1
1236         fi
1237
1238     query="/services/keepalive?name="$2
1239     res="$(__do_curl_to_api PA PUT $query)"
1240     status=${res:${#res}-3}
1241
1242         if [ $status -ne $1 ]; then
1243                 echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED
1244                 ((RES_FAIL++))
1245                 __check_stop_at_error
1246                 return 1
1247         fi
1248
1249         ((RES_PASS++))
1250         echo -e $GREEN" PASS"$EGREEN
1251         return 0
1252 }
1253