3 # ============LICENSE_START===============================================
4 # Copyright (C) 2021-2023 Nordix Foundation. All rights reserved.
5 # ========================================================================
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
17 # ============LICENSE_END=================================================
20 # This is a script that contains management and test functions for A1PMS
22 ################ Test engine functions ################
24 # Create the image var used during the test
25 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
26 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
27 __A1PMS_imagesetup() {
28 __check_and_create_image_var A1PMS "A1PMS_IMAGE" "A1PMS_IMAGE_BASE" "A1PMS_IMAGE_TAG" $1 "$A1PMS_DISPLAY_NAME" ""
31 # Pull image from remote repo or use locally built image
32 # arg: <pull-policy-override> <pull-policy-original>
33 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
34 # <pull-policy-original> Shall be used for images that does not allow overriding
35 # Both var may contain: 'remote', 'remote-remove' or 'local'
37 __check_and_pull_image $1 "$A1PMS_DISPLAY_NAME" $A1PMS_APP_NAME A1PMS_IMAGE
40 # Build image (only for simulator or interfaces stubs owned by the test environment)
41 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
42 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
43 __A1PMS_imagebuild() {
44 echo -e $RED" Image for app A1PMS shall never be built"$ERED
47 # Generate a string for each included image using the app display name and a docker images format string
48 # If a custom image repo is used then also the source image from the local repo is listed
49 # arg: <docker-images-format-string> <file-to-append>
50 __A1PMS_image_data() {
51 echo -e "$A1PMS_DISPLAY_NAME\t$(docker images --format $1 $A1PMS_IMAGE)" >> $2
52 if [ ! -z "$A1PMS_IMAGE_SOURCE" ]; then
53 echo -e "-- source image --\t$(docker images --format $1 $A1PMS_IMAGE_SOURCE)" >> $2
57 # Scale kubernetes resources to zero
58 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
59 # This function is called for apps fully managed by the test script
60 __A1PMS_kube_scale_zero() {
61 __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
64 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
65 # This function is called for pre-started apps not managed by the test script.
66 __A1PMS_kube_scale_zero_and_wait() {
67 __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice
70 # Delete all kube resources for the app
71 # This function is called for apps managed by the test script.
72 __A1PMS_kube_delete_all() {
73 __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
77 # This function is called for apps managed by the test script.
78 # args: <log-dir> <file-prefix>
79 __A1PMS_store_docker_logs() {
80 if [ $RUNMODE == "KUBE" ]; then
81 kubectl $KUBECONF logs -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_a1pms.log 2>&1
83 docker logs $A1PMS_APP_NAME > $1$2_a1pms.log 2>&1
87 # Initial setup of protocol, host and ports
88 # This function is called for apps managed by the test script.
90 __A1PMS_initial_setup() {
92 export A1PMS_SIDECAR_JWT_FILE=""
95 # Set app short-name, app name and namespace for logging runtime statistics of kubernetes pods or docker containers
96 # For docker, the namespace shall be excluded
97 # This function is called for apps managed by the test script as well as for pre-started apps.
99 __A1PMS_statistics_setup() {
100 if [ $RUNMODE == "KUBE" ]; then
101 echo "A1PMS $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
103 echo "A1PMS $A1PMS_APP_NAME"
107 # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
109 __A1PMS_test_requirements() {
114 #######################################################
116 ###########################
118 ###########################
120 # Set http as the protocol to use for all communication to the A1PMS
122 # (Function for test scripts)
123 use_a1pms_rest_http() {
124 __a1pms_set_protocoll "http" $A1PMS_INTERNAL_PORT $A1PMS_EXTERNAL_PORT
127 # Set https as the protocol to use for all communication to the A1PMS
129 # (Function for test scripts)
130 use_a1pms_rest_https() {
131 __a1pms_set_protocoll "https" $A1PMS_INTERNAL_SECURE_PORT $A1PMS_EXTERNAL_SECURE_PORT
134 # All calls to the a1pms will be directed to the a1pms dmaap interface over http from now on
136 # (Function for test scripts)
137 use_a1pms_dmaap_http() {
138 echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
139 echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
140 A1PMS_ADAPTER_TYPE="MR-HTTP"
144 # All calls to the a1pms will be directed to the a1pms dmaap interface over https from now on
146 # (Function for test scripts)
147 use_a1pms_dmaap_https() {
148 echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
149 echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
150 echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW
151 A1PMS_ADAPTER_TYPE="MR-HTTPS"
155 # Setup paths to svc/container for internal and external access
156 # args: <protocol> <internal-port> <external-port>
157 __a1pms_set_protocoll() {
158 echo -e $BOLD"$A1PMS_DISPLAY_NAME protocol setting"$EBOLD
159 echo -e " Using $BOLD $1 $EBOLD towards $A1PMS_DISPLAY_NAME"
161 ## Access to Dmaap adapter
163 A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME":"$2 # docker access, container->container and script->container via proxy
164 if [ $RUNMODE == "KUBE" ]; then
165 A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
168 # A1PMS_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
169 A1PMS_ADAPTER_TYPE="REST"
170 A1PMS_ADAPTER=$A1PMS_SERVICE_PATH
175 # Make curl retries towards the a1pms for http response codes set in this env var, space separated list of codes
178 #Save first worker node the pod is started on
179 __A1PMS_WORKER_NODE=""
181 # Export env vars for config files, docker compose and kube resources
182 # args: PROXY|NOPROXY
183 __export_a1pms_vars() {
185 export A1PMS_APP_NAME
186 export A1PMS_APP_NAME_ALIAS
187 export A1PMS_DISPLAY_NAME
189 export KUBE_NONRTRIC_NAMESPACE
191 export A1PMS_INTERNAL_PORT
192 export A1PMS_INTERNAL_SECURE_PORT
193 export A1PMS_EXTERNAL_PORT
194 export A1PMS_EXTERNAL_SECURE_PORT
195 export A1PMS_CONFIG_MOUNT_PATH
196 export A1PMS_DATA_MOUNT_PATH
197 export A1PMS_CONFIG_CONFIGMAP_NAME=$A1PMS_APP_NAME"-config"
198 export A1PMS_DATA_CONFIGMAP_NAME=$A1PMS_APP_NAME"-data"
199 export A1PMS_PKG_NAME
200 export A1PMS_CONFIG_KEY
201 export DOCKER_SIM_NWNAME
202 export A1PMS_HOST_MNT_DIR
203 export A1PMS_CONFIG_FILE
205 export A1PMS_DATA_PV_NAME=$A1PMS_APP_NAME"-pv"
206 export A1PMS_DATA_PVC_NAME=$A1PMS_APP_NAME"-pvc"
207 ##Create a unique path for the pv each time to prevent a previous volume to be reused
208 export A1PMS_PV_PATH="a1pmsdata-"$(date +%s)
209 export A1PMS_CONTAINER_MNT_DIR
210 export HOST_PATH_BASE_DIR
212 if [ $1 == "PROXY" ]; then
213 export A1PMS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
214 export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
215 if [ $A1PMS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$A1PMS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
216 echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
218 echo " Configured with http proxy"
221 export A1PMS_HTTP_PROXY_CONFIG_PORT=0
222 export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=""
223 echo " Configured without http proxy"
229 # args: (docker) PROXY|NOPROXY <config-file>
230 # args: (kube) PROXY|NOPROXY <config-file> [ <data-file>]
231 # (Function for test scripts)
233 echo -e $BOLD"Starting $A1PMS_DISPLAY_NAME"$EBOLD
235 if [ $RUNMODE == "KUBE" ]; then
237 # Check if app shall be fully managed by the test script
238 __check_included_image "A1PMS"
241 # Check if app shall only be used by the test script
242 __check_prestarted_image "A1PMS"
245 if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
246 echo -e $RED"The $A1PMS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
247 echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
250 if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
251 echo -e $RED"The $A1PMS_APP_NAME app is included both as managed and prestarted in this test script"$ERED
252 echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
256 if [ $retcode_p -eq 0 ]; then
257 echo -e " Using existing $A1PMS_APP_NAME deployment and service"
258 echo " Setting $A1PMS_APP_NAME replicas=1"
259 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
260 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
263 if [ $retcode_i -eq 0 ]; then
265 echo -e " Creating $A1PMS_APP_NAME app and expose service"
267 #Check if nonrtric namespace exists, if not create it
268 __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE
270 __export_a1pms_vars $1
272 # Create config map for config
273 configfile=$PWD/tmp/$A1PMS_CONFIG_FILE
275 output_yaml=$PWD/tmp/a1pms-cfc.yaml
276 __kube_create_configmap $A1PMS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $configfile $output_yaml
278 # Create config map for data
279 data_json=$PWD/tmp/$A1PMS_DATA_FILE
280 if [ $# -lt 3 ]; then
281 #create empty dummy file
282 echo "{}" > $data_json
286 output_yaml=$PWD/tmp/a1pms-cfd.yaml
287 __kube_create_configmap $A1PMS_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml
290 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pv.yaml
291 output_yaml=$PWD/tmp/a1pms-pv.yaml
292 __kube_create_instance pv $A1PMS_APP_NAME $input_yaml $output_yaml
295 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pvc.yaml
296 output_yaml=$PWD/tmp/a1pms-pvc.yaml
297 __kube_create_instance pvc $A1PMS_APP_NAME $input_yaml $output_yaml
300 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"svc.yaml
301 output_yaml=$PWD/tmp/a1pmssvc.yaml
302 __kube_create_instance service $A1PMS_APP_NAME $input_yaml $output_yaml
305 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"app.yaml
306 output_yaml=$PWD/tmp/a1pmsapp.yaml
307 if [ -z "$A1PMS_SIDECAR_JWT_FILE" ]; then
308 cat $input_yaml | sed '/#A1PMS_JWT_START/,/#A1PMS_JWT_STOP/d' > $PWD/tmp/a1pmsapp_tmp.yaml
309 input_yaml=$PWD/tmp/a1pmsapp_tmp.yaml
311 __kube_create_instance app $A1PMS_APP_NAME $input_yaml $output_yaml
315 # Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host
316 if [ $retcode_i -eq 0 ]; then
317 __A1PMS_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}')
318 if [ -z "$__A1PMS_WORKER_NODE" ]; then
319 echo -e $YELLOW" Cannot find worker node for pod for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
322 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
325 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
328 __check_included_image 'A1PMS'
329 if [ $? -eq 1 ]; then
330 echo -e $RED"The A1PMS app is not included in this test script"$ERED
331 echo -e $RED"The A1PMS will not be started"$ERED
338 cd $A1PMS_HOST_MNT_DIR
341 if [ "$(ls -A $DIR)" ]; then
342 echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD
343 rm -rf db/* &> /dev/null
344 if [ $? -ne 0 ]; then
345 echo -e $RED" Cannot remove database files in: $PWD"$ERED
350 echo " No files in mounted dir or dir does not exists"
355 __export_a1pms_vars $1
357 dest_file=$SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_HOST_MNT_DIR/application.yaml
359 envsubst < $2 > $dest_file
361 __start_container $A1PMS_COMPOSE_DIR "" NODOCKERARGS 1 $A1PMS_APP_NAME
363 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
366 __collect_endpoint_stats_image_info "A1PMS" $A1PMS_IMAGE
374 # (Function for test scripts)
376 echo -e $BOLD"Stopping $A1PMS_DISPLAY_NAME"$EBOLD
378 if [ $RUNMODE == "KUBE" ]; then
380 __check_prestarted_image "A1PMS"
381 if [ $? -eq 0 ]; then
382 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
383 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
384 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0
387 __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
388 echo " Deleting the replica set - a new will be started when the app is started"
389 tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA")
390 if [ $? -ne 0 ]; then
391 echo -e $RED" Could not delete replica set "$RED
396 docker stop $A1PMS_APP_NAME &> ./tmp/.dockererr
397 if [ $? -ne 0 ]; then
398 __print_err "Could not stop $A1PMS_APP_NAME" $@
404 echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
409 # Start a previously stopped a1pms
411 # (Function for test scripts)
412 start_stopped_a1pms() {
413 echo -e $BOLD"Starting (the previously stopped) $A1PMS_DISPLAY_NAME"$EBOLD
415 if [ $RUNMODE == "KUBE" ]; then
417 __check_prestarted_image "A1PMS"
418 if [ $? -eq 0 ]; then
419 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
420 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
421 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
422 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
426 # Tie the A1PMS to the same worker node it was initially started on
427 # A PVC of type hostPath is mounted to A1PMS, for persistent storage, so the A1PMS must always be on the node which mounted the volume
428 if [ -z "$__A1PMS_WORKER_NODE" ]; then
429 echo -e $RED" No initial worker node found for pod "$RED
433 echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__A1PMS_WORKER_NODE to deployment for $A1PMS_APP_NAME. Pod will always run on this worker node: $__A1PMS_WORKER_NODE"$BOLD
434 echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD
435 tmp=$(kubectl $KUBECONF patch deployment $A1PMS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__A1PMS_WORKER_NODE'"}}}}}')
436 if [ $? -ne 0 ]; then
437 echo -e $YELLOW" Cannot set nodeSelector to deployment for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
439 __kube_scale deployment $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
442 docker start $A1PMS_APP_NAME &> ./tmp/.dockererr
443 if [ $? -ne 0 ]; then
444 __print_err "Could not start (the stopped) $A1PMS_APP_NAME" $@
450 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
451 if [ $? -ne 0 ]; then
459 # Function to prepare the a1pms configuration according to the current simulator configuration
460 # args: SDNC|NOSDNC <output-file> [ <sim-group> <adapter-class> ]
461 # (Function for test scripts)
462 prepare_a1pms_config() {
463 echo -e $BOLD"Prepare A1PMS config"$EBOLD
465 echo " Writing a1pms config for "$A1PMS_APP_NAME" to file: "$2
467 if [ $# != 2 ] && [ $# != 4 ]; then
469 __print_err "need two or four args, SDNC|NOSDNC <output-file> [ <sim-group> <adapter-class> ]" $@
473 if [ $1 == "SDNC" ]; then
474 echo -e " Config$BOLD including SDNC$EBOLD configuration"
475 elif [ $1 == "NOSDNC" ]; then
476 echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
479 __print_err "need three args, SDNC|NOSDNC <output-file> HEADER|NOHEADER" $@
484 if [ $1 == "SDNC" ]; then
485 config_json=$config_json"\n \"controller\": ["
486 config_json=$config_json"\n {"
487 config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
488 config_json=$config_json"\n \"baseUrl\": \"$SDNC_SERVICE_PATH\","
489 config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
490 config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
491 config_json=$config_json"\n }"
492 config_json=$config_json"\n ],"
494 if [[ "$A1PMS_FEATURE_LEVEL" == *"NO-DMAAP"* ]]; then
497 config_json=$config_json"\n \"streams_publishes\": {"
498 config_json=$config_json"\n \"dmaap_publisher\": {"
499 config_json=$config_json"\n \"type\": \"message-router\","
500 config_json=$config_json"\n \"dmaap_info\": {"
501 config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\""
502 config_json=$config_json"\n }"
503 config_json=$config_json"\n }"
504 config_json=$config_json"\n },"
505 config_json=$config_json"\n \"streams_subscribes\": {"
506 config_json=$config_json"\n \"dmaap_subscriber\": {"
507 config_json=$config_json"\n \"type\": \"message-router\","
508 config_json=$config_json"\n \"dmaap_info\": {"
509 config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\""
510 config_json=$config_json"\n }"
511 config_json=$config_json"\n }"
512 config_json=$config_json"\n },"
515 config_json=$config_json"\n \"ric\": ["
517 if [ $RUNMODE == "KUBE" ]; then
518 result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}')
521 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
522 for im in $result; do
523 if [[ $im != *"-0" ]]; then
524 ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
525 rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
526 let ric_cntr=ric_cntr+1
530 result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICMEDIATORSIM")].metadata.name}')
532 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
533 for im in $result; do
534 if [[ $im != *"-0" ]]; then
535 ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
536 rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
537 oranrics=$oranrics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
538 let ric_cntr=ric_cntr+1
542 if [ $ric_cntr -eq 0 ]; then
543 echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW
546 rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=a1sim" --filter "status=running" --format {{.Names}})
547 if [ $? -ne 0 ] || [ -z "$rics" ]; then
548 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
552 oranrics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=orana1sim" --filter "status=running" --format {{.Names}})
553 if [ $? -ne 0 ] || [ -z "$rics" ]; then
554 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
558 rics="$rics $oranrics"
562 if [ $cntr -gt 0 ]; then
563 config_json=$config_json"\n ,"
565 config_json=$config_json"\n {"
566 if [ $RUNMODE == "KUBE" ]; then
567 ric_id=${ric%.*.*} #extract pod id from full hosthame
568 ric_id=$(echo "$ric_id" | tr '-' '_')
570 if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
573 ric_id=$(echo "$ric" | tr '-' '_') #ric id still needs underscore as it is different from the container name
576 echo " Found a1 sim: "$ric_id
577 config_json=$config_json"\n \"name\": \"$ric_id\","
580 for xric in $oranrics; do
581 if [ $xric == $ric ]; then
585 if [ $xricfound -eq 0 ]; then
586 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
588 config_json=$config_json"\n \"baseUrl\": \"$RICMEDIATOR_SIM_HTTPX://$ric:$RICMEDIATOR_SIM_PORT\","
590 if [ ! -z "$3" ]; then
591 if [[ $ric == "$3"* ]]; then
592 config_json=$config_json"\n \"customAdapterClass\": \"$4\","
595 if [ $1 == "SDNC" ]; then
596 config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
598 config_json=$config_json"\n \"managedElementIds\": ["
599 config_json=$config_json"\n \"me1_$ric_id\","
600 config_json=$config_json"\n \"me2_$ric_id\""
601 config_json=$config_json"\n ]"
602 config_json=$config_json"\n }"
606 config_json=$config_json"\n ]"
607 config_json=$config_json"\n}"
609 config_json="{\"config\":"$config_json"}"
611 printf "$config_json">$2
616 # Load the the appl config for the a1pms into a config map
617 a1pms_load_config() {
618 echo -e $BOLD"A1PMS - load config from "$EBOLD$1
619 data_json=$PWD/tmp/$A1PMS_DATA_FILE
621 output_yaml=$PWD/tmp/a1pms-cfd.yaml
622 __kube_create_configmap $A1PMS_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml
627 # Turn on debug level tracing in the a1pms
629 # (Function for test scripts)
631 echo -e $BOLD"Setting a1pms debug logging"$EBOLD
632 curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
633 result=$(__do_curl "$curlString")
634 if [ $? -ne 0 ]; then
635 __print_err "could not set debug mode" $@
643 # Turn on trace level tracing in the a1pms
645 # (Function for test scripts)
647 echo -e $BOLD"Setting a1pms trace logging"$EBOLD
648 curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
649 result=$(__do_curl "$curlString")
650 if [ $? -ne 0 ]; then
651 __print_err "could not set trace mode" $@
659 # Perform curl retries when making direct call to the a1pms for the specified http response codes
660 # Speace separated list of http response codes
661 # args: [<response-code>]*
662 use_a1pms_retries() {
663 echo -e $BOLD"Do curl retries to the a1pms REST inteface for these response codes:$@"$EBOLD
669 # Check the a1pms logs for WARNINGs and ERRORs
671 # (Function for test scripts)
673 __check_container_logs "A1PMS" $A1PMS_APP_NAME $A1PMS_LOGPATH WARN ERR
676 #########################################################
677 #### Test case functions A1 Policy management service
678 #########################################################
680 # This function compare the size, towards a target value, of a json array returned from <url> of the A1PMS.
681 # This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
682 # args: json:<url> <target-value> [<timeout-in-seconds]
683 # (Function for test scripts)
685 echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
686 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
687 if [[ $1 == "json:"* ]]; then
688 if [ "$A1PMS_VERSION" == "V2" ]; then
689 __var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v2/" $1 "=" $2 $3
691 __var_test "A1PMS" $A1PMS_SERVICE_PATH"/" $1 "=" $2 $3
696 __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
700 # API Test function: GET /policies and V2 GET /v2/policy-instances
701 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
702 # args(V2): <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]
703 # (Function for test scripts)
704 a1pms_api_get_policies() {
707 if [ "$A1PMS_VERSION" == "V2" ]; then
709 variableParams=$(($#-4))
710 if [ $# -lt 4 ]; then
712 elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
714 elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then
718 if [ $paramError -ne 0 ]; then
719 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]" $@
724 variableParams=$(($#-4))
725 if [ $# -lt 4 ]; then
727 elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
729 elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then
733 if [ $paramError -ne 0 ]; then
734 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
740 if [ "$A1PMS_VERSION" == "V2" ]; then
741 if [ $2 != "NORIC" ]; then
742 queryparams="?ric_id="$2
744 if [ $3 != "NOSERVICE" ]; then
745 if [ -z $queryparams ]; then
746 queryparams="?service_id="$3
748 queryparams=$queryparams"&service_id="$3
751 if [ $4 != "NOTYPE" ]; then
752 if [ -z $queryparams ]; then
753 queryparams="?policytype_id="$4
755 queryparams=$queryparams"&policytype_id="$4
759 query="/v2/policy-instances"$queryparams
760 res="$(__do_curl_to_api A1PMS GET $query)"
761 status=${res:${#res}-3}
763 if [ $status -ne $1 ]; then
764 __log_test_fail_status_code $1 $status
768 if [ $# -gt 4 ]; then
769 body=${res:0:${#res}-3}
770 if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
776 for ((i=0; i<$(($#-4)); i=i+7)); do
778 if [ "$targetJson" != "[" ]; then
779 targetJson=$targetJson","
781 targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":"
782 if [ "${arr[$i+3]}" == "EMPTY" ]; then
783 targetJson=$targetJson"\"\","
785 targetJson=$targetJson"\"${arr[$i+3]}\","
787 targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\","
789 sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file
791 targetJson=$targetJson"\"policy_data\":"$json"}"
795 targetJson=$targetJson"]"
796 targetJson="{\"policies\": $targetJson}"
797 echo "TARGET JSON: $targetJson" >> $HTTPLOG
798 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
800 if [ $res -ne 0 ]; then
806 if [ $2 != "NORIC" ]; then
807 queryparams="?ric="$2
809 if [ $3 != "NOSERVICE" ]; then
810 if [ -z $queryparams ]; then
811 queryparams="?service="$3
813 queryparams=$queryparams"&service="$3
816 if [ $4 != "NOTYPE" ]; then
817 if [ -z $queryparams ]; then
818 queryparams="?type="$4
820 queryparams=$queryparams"&type="$4
824 query="/policies"$queryparams
825 res="$(__do_curl_to_api A1PMS GET $query)"
826 status=${res:${#res}-3}
828 if [ $status -ne $1 ]; then
829 __log_test_fail_status_code $1 $status
833 if [ $# -gt 4 ]; then
834 if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
837 body=${res:0:${#res}-3}
841 for ((i=0; i<$(($#-4)); i=i+5)); do
843 if [ "$targetJson" != "[" ]; then
844 targetJson=$targetJson","
846 targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
847 if [ "${arr[$i+3]}" == "EMPTY" ]; then
848 targetJson=$targetJson"\"\","
850 targetJson=$targetJson"\"${arr[$i+3]}\","
853 sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
855 targetJson=$targetJson"\"json\":"$json"}"
859 targetJson=$targetJson"]"
860 echo "TARGET JSON: $targetJson" >> $HTTPLOG
861 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
863 if [ $res -ne 0 ]; then
869 __collect_endpoint_stats "A1PMS" 00 "GET" $A1PMS_API_PREFIX"/v2/policy-instances" $status
876 # API Test function: GET /policy and V2 GET /v2/policies/{policy_id}
877 # args: <response-code> <policy-id> [<template-file>]
878 # args(V2): <response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]
880 # (Function for test scripts)
881 a1pms_api_get_policy() {
885 if [ "$A1PMS_VERSION" == "V2" ]; then
886 if [ $# -ne 2 ] && [ $# -ne 8 ]; then
887 __print_err "<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]" $@
890 query="/v2/policies/$UUID$2"
892 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
893 __print_err "<response-code> <policy-id> [<template-file>] " $@
896 query="/policy?id=$UUID$2"
898 res="$(__do_curl_to_api A1PMS GET $query)"
899 status=${res:${#res}-3}
901 if [ $status -ne $1 ]; then
902 __log_test_fail_status_code $1 $status
906 if [ "$A1PMS_VERSION" == "V2" ]; then
907 if [ $# -eq 8 ]; then
909 #Create a policy json to compare with
910 body=${res:0:${#res}-3}
912 targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\""
913 if [ $7 != "NOTRANSIENT" ]; then
914 targetJson=$targetJson", \"transient\":$7"
916 if [ $6 != "NOTYPE" ]; then
917 targetJson=$targetJson", \"policytype_id\":\"$6\""
919 targetJson=$targetJson", \"policytype_id\":\"\""
921 if [ $8 != "NOURL" ]; then
922 targetJson=$targetJson", \"status_notification_uri\":\"$8\""
925 data=$(sed 's/XXX/'${2}'/g' $3)
926 targetJson=$targetJson", \"policy_data\":$data"
927 targetJson="{$targetJson}"
929 echo "TARGET JSON: $targetJson" >> $HTTPLOG
930 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
931 if [ $res -ne 0 ]; then
937 if [ $# -eq 3 ]; then
938 #Create a policy json to compare with
939 body=${res:0:${#res}-3}
941 sed 's/XXX/'${2}'/g' $3 > $file
942 targetJson=$(< $file)
943 echo "TARGET JSON: $targetJson" >> $HTTPLOG
944 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
945 if [ $res -ne 0 ]; then
951 __collect_endpoint_stats "A1PMS" 01 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status
956 # API Test function: PUT /policy and V2 PUT /policies
957 # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]
958 # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]
959 # (Function for test scripts)
960 a1pms_api_put_policy() {
963 if [ "$A1PMS_VERSION" == "V2" ]; then
964 if [ $# -lt 8 ] || [ $# -gt 9 ]; then
965 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]" $@
969 if [ $# -lt 7 ] || [ $# -gt 8 ]; then
970 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@
983 if [ "$A1PMS_VERSION" == "V2" ]; then
986 if [ $# -eq 9 ]; then
991 if [ $# -eq 8 ]; then
996 while [ $count -lt $max ]; do
997 if [ "$A1PMS_VERSION" == "V2" ]; then
1001 inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
1002 if [ $trans != "NOTRANSIENT" ]; then
1003 inputJson=$inputJson", \"transient\":$trans"
1005 if [ $pt != "NOTYPE" ]; then
1006 inputJson=$inputJson", \"policytype_id\":\"$pt\""
1008 inputJson=$inputJson", \"policytype_id\":\"\""
1010 if [ $noti != "NOURL" ]; then
1011 inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
1013 file="./tmp/.p.json"
1014 data=$(sed 's/XXX/'${pid}'/g' $temp)
1015 inputJson=$inputJson", \"policy_data\":$data"
1016 inputJson="{$inputJson}"
1017 echo $inputJson > $file
1019 query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
1021 if [ $pt != "NOTYPE" ]; then
1022 query=$query"&type=$pt"
1025 if [ $trans != NOTRANSIENT ]; then
1026 query=$query"&transient=$trans"
1029 file="./tmp/.p.json"
1030 sed 's/XXX/'${pid}'/g' $temp > $file
1032 res="$(__do_curl_to_api A1PMS PUT $query $file)"
1033 status=${res:${#res}-3}
1034 echo -ne " Executing "$count"("$max")${SAMELINE}"
1035 if [ $status -ne $1 ]; then
1036 echo " Executed "$count"?("$max")"
1037 __log_test_fail_status_code $1 $status
1042 echo -ne " Executed "$count"("$max")${SAMELINE}"
1044 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $status $max
1051 # API Test function: PUT /policy and V2 PUT /policies, to run in batch
1052 # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]
1053 # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]
1054 # (Function for test scripts)
1056 a1pms_api_put_policy_batch() {
1059 if [ "$A1PMS_VERSION" == "V2" ]; then
1060 if [ $# -lt 8 ] || [ $# -gt 9 ]; then
1061 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]" $@
1065 if [ $# -lt 7 ] || [ $# -gt 8 ]; then
1066 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]" $@
1078 if [ "$A1PMS_VERSION" == "V2" ]; then
1081 if [ $# -eq 9 ]; then
1086 if [ $# -eq 8 ]; then
1092 while [ $count -lt $max ]; do
1093 if [ "$A1PMS_VERSION" == "V2" ]; then
1094 query="/v2/policies"
1096 inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
1097 if [ $trans != "NOTRANSIENT" ]; then
1098 inputJson=$inputJson", \"transient\":$trans"
1100 if [ $pt != "NOTYPE" ]; then
1101 inputJson=$inputJson", \"policytype_id\":\"$pt\""
1103 inputJson=$inputJson", \"policytype_id\":\"\""
1105 if [ $noti != "NOURL" ]; then
1106 inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
1108 file="./tmp/.p.json"
1109 data=$(sed 's/XXX/'${pid}'/g' $temp)
1110 inputJson=$inputJson", \"policy_data\":$data"
1111 inputJson="{$inputJson}"
1112 echo $inputJson > $file
1114 query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
1116 if [ $pt != "NOTYPE" ]; then
1117 query=$query"&type=$pt"
1120 if [ $trans != NOTRANSIENT ]; then
1121 query=$query"&transient=$trans"
1123 file="./tmp/.p.json"
1124 sed 's/XXX/'${pid}'/g' $temp > $file
1126 res="$(__do_curl_to_api A1PMS PUT_BATCH $query $file)"
1127 status=${res:${#res}-3}
1128 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
1130 if [ $status -ne 200 ]; then
1131 echo " Requested(batch) "$count"?("$max")"
1132 __log_test_fail_status_code 200 $status
1135 cid=${res:0:${#res}-3}
1139 echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
1146 res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
1147 status=${res:${#res}-3}
1148 echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}"
1150 if [ $status -ne $1 ]; then
1151 echo " Accepted(batch) "$count"?("$max")"
1152 __log_test_fail_status_code $1 $status
1157 echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}"
1159 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $1 $max
1167 # API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics
1168 # args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
1169 # args(V2): <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>
1170 # (Function for test scripts)
1171 a1pms_api_put_policy_parallel() {
1174 if [ "$A1PMS_VERSION" == "V2" ]; then
1175 if [ $# -ne 11 ]; then
1176 __print_err "<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>" $@
1180 if [ $# -ne 10 ]; then
1181 __print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@
1185 resp_code=$1; shift;
1191 transient=$1; shift;
1192 if [ "$A1PMS_VERSION" == "V2" ]; then
1201 #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
1202 if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
1203 echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
1204 echo " Info - will execute over a1pms REST"
1206 if [ "$A1PMS_VERSION" == "V2" ]; then
1207 if [ $serv == "NOSERVICE" ]; then
1210 query="$A1PMS_API_PREFIX/v2/policies"
1212 if [ $serv == "NOSERVICE" ]; then
1215 query="/policy?service=$serv"
1217 if [ $type != "NOTYPE" ]; then
1218 query=$query"&type=$type"
1221 if [ $transient != NOTRANSIENT ]; then
1222 query=$query"&transient=$transient"
1226 urlbase=${A1PMS_ADAPTER}${query}
1229 if [ ! -z "$KUBE_PROXY_PATH" ]; then
1230 httpproxy=$KUBE_PROXY_PATH
1233 for ((i=1; i<=$pids; i++))
1236 if [ -z "$uuid" ]; then
1239 echo "" > "./tmp/.pid${i}.res.txt"
1240 if [ "$A1PMS_VERSION" == "V2" ]; then
1241 echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
1243 echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
1246 done | xargs -n 1 -I{} -P $pids bash -c '{
1248 echo " Parallel process $arg started"
1249 tmp=$(< "./tmp/.pid${arg}.txt")
1250 python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt
1253 for ((i=1; i<=$pids; i++))
1255 file="./tmp/.pid${i}.res.txt"
1257 if [ -z "$tmp" ]; then
1258 echo " Process $i : unknown result (result file empty"
1262 if [ $res == "0" ]; then
1263 echo " Process $i : OK - "${tmp:1}
1265 echo " Process $i : failed - "${tmp:1}
1270 if [ -z $msg ]; then
1271 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $resp_code $(($count*$num_rics))
1272 __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
1276 __log_test_fail_general "One of more processes failed to execute"
1280 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}
1281 # args: <response-code> <policy-id> [count]
1282 # (Function for test scripts)
1283 a1pms_api_delete_policy() {
1286 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1287 __print_err "<response-code> <policy-id> [count]" $@
1294 if [ $# -eq 3 ]; then
1300 while [ $count -lt $max ]; do
1301 if [ "$A1PMS_VERSION" == "V2" ]; then
1302 query="/v2/policies/"$UUID$pid
1304 query="/policy?id="$UUID$pid
1306 res="$(__do_curl_to_api A1PMS DELETE $query)"
1307 status=${res:${#res}-3}
1308 echo -ne " Executing "$count"("$max")${SAMELINE}"
1310 if [ $status -ne $1 ]; then
1311 echo " Executed "$count"?("$max")"
1312 __log_test_fail_status_code $1 $status
1318 echo -ne " Executed "$count"("$max")${SAMELINE}"
1320 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status $max
1327 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch
1328 # args: <response-code> <policy-id> [count]
1329 # (Function for test scripts)
1330 a1pms_api_delete_policy_batch() {
1333 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1334 __print_err "<response-code> <policy-id> [count]" $@
1341 if [ $# -eq 3 ]; then
1347 while [ $count -lt $max ]; do
1348 if [ "$A1PMS_VERSION" == "V2" ]; then
1349 query="/v2/policies/"$UUID$pid
1351 query="/policy?id="$UUID$pid
1353 res="$(__do_curl_to_api A1PMS DELETE_BATCH $query)"
1354 status=${res:${#res}-3}
1355 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
1357 if [ $status -ne 200 ]; then
1358 echo " Requested(batch) "$count"?("$max")"
1359 __log_test_fail_status_code 200 $status
1362 cid=${res:0:${#res}-3}
1366 echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
1374 res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
1375 status=${res:${#res}-3}
1376 echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}"
1378 if [ $status -ne $1 ]; then
1379 echo " Deleted(batch) "$count"?("$max")"
1380 __log_test_fail_status_code $1 $status
1385 echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}"
1387 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max
1395 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics
1396 # args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
1397 # (Function for test scripts)
1398 a1pms_api_delete_policy_parallel() {
1401 if [ $# -ne 5 ]; then
1402 __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@
1405 resp_code=$1; shift;
1411 #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
1412 if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
1413 echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
1414 echo " Info - will execute over a1pms REST"
1417 if [ "$A1PMS_VERSION" == "V2" ]; then
1418 query="$A1PMS_API_PREFIX/v2/policies/"
1423 urlbase=${A1PMS_ADAPTER}${query}
1426 if [ ! -z "$KUBE_PROXY_PATH" ]; then
1427 httpproxy=$KUBE_PROXY_PATH
1430 for ((i=1; i<=$pids; i++))
1433 if [ -z "$uuid" ]; then
1436 echo "" > "./tmp/.pid${i}.del.res.txt"
1437 echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy> "./tmp/.pid${i}.del.txt"
1439 done | xargs -n 1 -I{} -P $pids bash -c '{
1441 echo " Parallel process $arg started"
1442 tmp=$(< "./tmp/.pid${arg}.del.txt")
1443 python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt
1446 for ((i=1; i<=$pids; i++))
1448 file="./tmp/.pid${i}.del.res.txt"
1450 if [ -z "$tmp" ]; then
1451 echo " Process $i : unknown result (result file empty"
1455 if [ $res == "0" ]; then
1456 echo " Process $i : OK - "${tmp:1}
1458 echo " Process $i : failed - "${tmp:1}
1463 if [ -z $msg ]; then
1464 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count*$num_rics))
1465 __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
1469 __log_test_fail_general "One of more processes failed to execute"
1473 # API Test function: GET /policy_ids and V2 GET /v2/policies
1474 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
1475 # (Function for test scripts)
1476 a1pms_api_get_policy_ids() {
1479 if [ $# -lt 4 ]; then
1480 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
1486 if [ "$A1PMS_VERSION" == "V2" ]; then
1487 if [ $2 != "NORIC" ]; then
1488 queryparams="?ric_id="$2
1491 if [ $3 != "NOSERVICE" ]; then
1492 if [ -z $queryparams ]; then
1493 queryparams="?service_id="$3
1495 queryparams=$queryparams"&service_id="$3
1498 if [ $4 != "NOTYPE" ]; then
1499 if [ -z $queryparams ]; then
1500 queryparams="?policytype_id="$4
1502 queryparams=$queryparams"&policytype_id="$4
1506 query="/v2/policies"$queryparams
1508 if [ $2 != "NORIC" ]; then
1509 queryparams="?ric="$2
1512 if [ $3 != "NOSERVICE" ]; then
1513 if [ -z $queryparams ]; then
1514 queryparams="?service="$3
1516 queryparams=$queryparams"&service="$3
1519 if [ $4 != "NOTYPE" ]; then
1520 if [ -z $queryparams ]; then
1521 queryparams="?type="$4
1523 queryparams=$queryparams"&type="$4
1527 query="/policy_ids"$queryparams
1530 res="$(__do_curl_to_api A1PMS GET $query)"
1531 status=${res:${#res}-3}
1533 if [ $status -ne $1 ]; then
1534 __log_test_fail_status_code $1 $status
1538 if [ $# -gt 4 ]; then
1539 body=${res:0:${#res}-3}
1542 for pid in ${@:5} ; do
1543 if [ "$targetJson" != "[" ]; then
1544 targetJson=$targetJson","
1546 if [ $pid != "NOID" ]; then
1547 targetJson=$targetJson"\"$UUID$pid\""
1551 targetJson=$targetJson"]"
1552 if [ "$A1PMS_VERSION" == "V2" ]; then
1553 targetJson="{\"policy_ids\": $targetJson}"
1555 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1556 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1558 if [ $res -ne 0 ]; then
1559 __log_test_fail_body
1564 __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies" $status
1569 # API Test function: V2 GET /v2/policy-types/{policyTypeId}
1570 # args(V2): <response-code> <policy-type-id> [<schema-file>]
1571 # (Function for test scripts)
1572 a1pms_api_get_policy_type() {
1575 if [ "$A1PMS_VERSION" != "V2" ]; then
1576 __log_test_fail_not_supported
1580 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1581 __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
1584 query="/v2/policy-types/$2"
1586 res="$(__do_curl_to_api A1PMS GET $query)"
1587 status=${res:${#res}-3}
1589 if [ $status -ne $1 ]; then
1590 __log_test_fail_status_code $1 $status
1594 if [ $# -eq 3 ]; then
1596 body=${res:0:${#res}-3}
1599 targetJson="{\"policy_schema\":$targetJson}"
1600 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1601 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1603 if [ $res -ne 0 ]; then
1604 __log_test_fail_body
1609 __collect_endpoint_stats "A1PMS" 05 "GET" $A1PMS_API_PREFIX"/v2/policy-types/{policyTypeId}" $status
1614 # API Test function: GET /policy_schema
1615 # args: <response-code> <policy-type-id> [<schema-file>]
1616 # (Function for test scripts)
1617 a1pms_api_get_policy_schema() {
1620 if [ "$A1PMS_VERSION" == "V2" ]; then
1621 __log_test_fail_not_supported
1625 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1626 __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
1629 query="/policy_schema?id=$2"
1630 res="$(__do_curl_to_api A1PMS GET $query)"
1631 status=${res:${#res}-3}
1633 if [ $status -ne $1 ]; then
1634 __log_test_fail_status_code $1 $status
1638 if [ $# -eq 3 ]; then
1640 body=${res:0:${#res}-3}
1644 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1645 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1647 if [ $res -ne 0 ]; then
1648 __log_test_fail_body
1653 __collect_endpoint_stats "A1PMS" 06 "GET" $A1PMS_API_PREFIX"/v2/policy_schema" $status
1658 # API Test function: GET /policy_schemas
1659 # args: <response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*
1660 # args(V2): <response-code>
1661 # (Function for test scripts)
1662 a1pms_api_get_policy_schemas() {
1665 if [ "$A1PMS_VERSION" == "V2" ]; then
1666 if [ $# -ne 1 ]; then
1667 __print_err "<response-code>" $@
1671 if [ $# -lt 2 ]; then
1672 __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
1676 if [ "$A1PMS_VERSION" == "V2" ]; then
1677 query="/v2/policy-schemas"
1679 query="/policy_schemas"
1680 if [ $2 != "NORIC" ]; then
1681 query=$query"?ric="$2
1685 res="$(__do_curl_to_api A1PMS GET $query)"
1686 status=${res:${#res}-3}
1688 if [ $status -ne $1 ]; then
1689 __log_test_fail_status_code $1 $status
1693 if [ $# -gt 2 ]; then
1694 body=${res:0:${#res}-3}
1697 for file in ${@:3} ; do
1698 if [ "$targetJson" != "[" ]; then
1699 targetJson=$targetJson","
1701 if [ $file == "NOFILE" ]; then
1702 targetJson=$targetJson"{}"
1704 targetJson=$targetJson$(< $file)
1708 targetJson=$targetJson"]"
1709 if [ "$A1PMS_VERSION" == "V2" ]; then
1710 targetJson="{\"policy_schemas\": $targetJson }"
1712 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1713 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1715 if [ $res -ne 0 ]; then
1716 __log_test_fail_body
1721 __collect_endpoint_stats "A1PMS" 07 "GET" $A1PMS_API_PREFIX"/v2/policy-schemas" $status
1726 # API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status
1727 # arg: <response-code> <policy-id> [ (STD|STD2 <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>) ]
1728 # (Function for test scripts)
1729 a1pms_api_get_policy_status() {
1732 if [ $# -lt 2 ] || [ $# -gt 5 ]; then
1733 __print_err "<response-code> <policy-id> [(STD <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>)]" $@
1738 if [ $# -eq 2 ]; then
1740 elif [ "$3" == "STD" ]; then
1741 targetJson="{\"enforceStatus\":\"$4\""
1742 if [ $# -eq 5 ]; then
1743 targetJson=$targetJson",\"reason\":\"$5\""
1745 targetJson=$targetJson"}"
1746 elif [ "$3" == "STD2" ]; then
1747 if [ $4 == "EMPTY" ]; then
1748 targetJson="{\"enforceStatus\":\"\""
1750 targetJson="{\"enforceStatus\":\"$4\""
1752 if [ $# -eq 5 ]; then
1753 if [ $5 == "EMPTY" ]; then
1754 targetJson=$targetJson",\"enforceReason\":\"\""
1756 targetJson=$targetJson",\"enforceReason\":\"$5\""
1759 targetJson=$targetJson"}"
1760 elif [ "$3" == "OSC" ]; then
1761 targetJson="{\"instance_status\":\"$4\""
1762 if [ $# -eq 5 ]; then
1763 targetJson=$targetJson",\"has_been_deleted\":\"$5\""
1765 targetJson=$targetJson",\"created_at\":\"????\"}"
1767 __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
1771 if [ "$A1PMS_VERSION" == "V2" ]; then
1772 query="/v2/policies/$UUID$2/status"
1773 targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}"
1775 query="/policy_status?id="$UUID$2
1778 res="$(__do_curl_to_api A1PMS GET $query)"
1779 status=${res:${#res}-3}
1781 if [ $status -ne $1 ]; then
1782 __log_test_fail_status_code $1 $status
1785 if [ $# -gt 2 ]; then
1786 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1787 body=${res:0:${#res}-3}
1788 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1790 if [ $res -ne 0 ]; then
1791 __log_test_fail_body
1795 __collect_endpoint_stats "A1PMS" 08 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status
1800 # API Test function: GET /policy_types and V2 GET /v2/policy-types
1801 # args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
1802 # (Function for test scripts)
1803 a1pms_api_get_policy_types() {
1806 if [ $# -lt 1 ]; then
1807 __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
1811 if [ "$A1PMS_VERSION" == "V2" ]; then
1812 if [ $# -eq 1 ]; then
1813 query="/v2/policy-types"
1814 elif [ $2 == "NORIC" ]; then
1815 query="/v2/policy-types"
1817 query="/v2/policy-types?ric_id=$2"
1820 if [ $# -eq 1 ]; then
1821 query="/policy_types"
1822 elif [ $2 == "NORIC" ]; then
1823 query="/policy_types"
1825 query="/policy_types?ric=$2"
1829 res="$(__do_curl_to_api A1PMS GET $query)"
1830 status=${res:${#res}-3}
1832 if [ $status -ne $1 ]; then
1833 __log_test_fail_status_code $1 $status
1837 if [ $# -gt 2 ]; then
1838 body=${res:0:${#res}-3}
1841 for pid in ${@:3} ; do
1842 if [ "$targetJson" != "[" ]; then
1843 targetJson=$targetJson","
1845 if [ $pid == "EMPTY" ]; then
1848 targetJson=$targetJson"\"$pid\""
1851 targetJson=$targetJson"]"
1852 if [ "$A1PMS_VERSION" == "V2" ]; then
1853 targetJson="{\"policytype_ids\": $targetJson }"
1855 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1856 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1858 if [ $res -ne 0 ]; then
1859 __log_test_fail_body
1864 __collect_endpoint_stats "A1PMS" 09 "GET" $A1PMS_API_PREFIX"/v2/policy-types" $status
1869 #########################################################
1870 #### Test case functions Health check
1871 #########################################################
1873 # API Test function: GET /status and V2 GET /status
1874 # args: <response-code>
1875 # (Function for test scripts)
1876 a1pms_api_get_status() {
1878 if [ $# -ne 1 ]; then
1879 __print_err "<response-code>" $@
1882 if [ "$A1PMS_VERSION" == "V2" ]; then
1887 res="$(__do_curl_to_api A1PMS GET $query)"
1888 status=${res:${#res}-3}
1890 if [ $status -ne $1 ]; then
1891 __log_test_fail_status_code $1 $status
1895 __collect_endpoint_stats "A1PMS" 10 "GET" $A1PMS_API_PREFIX"/v2/status" $status
1900 # API Test function: GET /status (root) without api prefix
1901 # args: <response-code>
1902 # (Function for test scripts)
1903 a1pms_api_get_status_root() {
1905 if [ $# -ne 1 ]; then
1906 __print_err "<response-code>" $@
1910 TMP_PREFIX=$A1PMS_API_PREFIX
1912 res="$(__do_curl_to_api A1PMS GET $query)"
1913 A1PMS_API_PREFIX=$TMP_PREFIX
1914 status=${res:${#res}-3}
1916 if [ $status -ne $1 ]; then
1917 __log_test_fail_status_code $1 $status
1921 __collect_endpoint_stats "A1PMS" 19 "GET" "/status" $status
1926 #########################################################
1927 #### Test case functions RIC Repository
1928 #########################################################
1930 # API Test function: GET /ric and V2 GET /v2/rics/ric
1931 # args: <reponse-code> <management-element-id> [<ric-id>]
1932 # (V2) args: <reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [<string-of-ricinfo>]
1933 # (V2) example of <string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4"
1934 # (V2) format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
1937 # (Function for test scripts)
1938 a1pms_api_get_ric() {
1941 if [ "$A1PMS_VERSION" == "V2" ]; then
1942 if [ $# -lt 3 ]; then
1943 __print_err "<reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [string-of-ricinfo>]" $@
1947 if [ $2 != "NOME" ]; then
1948 search="?managed_element_id="$2
1950 if [ $3 != "NORIC" ]; then
1951 if [ -z $search ]; then
1954 search=$search"&ric_id="$3
1957 query="/v2/rics/ric"$search
1959 res="$(__do_curl_to_api A1PMS GET $query)"
1960 status=${res:${#res}-3}
1962 if [ $status -ne $1 ]; then
1963 __log_test_fail_status_code $1 $status
1967 if [ $# -gt 3 ]; then
1968 body=${res:0:${#res}-3}
1969 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" )
1970 if [ $res -ne 0 ]; then
1971 __log_test_fail_general "Could not create target ric info json"
1975 targetJson=$(<./tmp/.tmp_rics.json)
1976 targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets
1977 echo " TARGET JSON: $targetJson" >> $HTTPLOG
1978 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1979 if [ $res -ne 0 ]; then
1980 __log_test_fail_body
1985 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1986 __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
1990 query="/ric?managedElementId="$2
1992 res="$(__do_curl_to_api A1PMS GET $query)"
1993 status=${res:${#res}-3}
1995 if [ $status -ne $1 ]; then
1996 __log_test_fail_status_code $1 $status
2000 if [ $# -eq 3 ]; then
2001 body=${res:0:${#res}-3}
2002 if [ "$body" != "$3" ]; then
2003 __log_test_fail_body
2009 __collect_endpoint_stats "A1PMS" 11 "GET" $A1PMS_API_PREFIX"/v2/rics/ric" $status
2014 # API test function: GET /rics and V2 GET /v2/rics
2015 # args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
2016 # example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
2017 # format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
2018 # (Function for test scripts)
2019 a1pms_api_get_rics() {
2022 if [ $# -lt 2 ]; then
2023 __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
2027 if [ "$A1PMS_VERSION" == "V2" ]; then
2029 if [ $2 != "NOTYPE" ]; then
2030 query="/v2/rics?policytype_id="$2
2034 if [ $2 != "NOTYPE" ]; then
2035 query="/rics?policyType="$2
2039 res="$(__do_curl_to_api A1PMS GET $query)"
2040 status=${res:${#res}-3}
2042 if [ $status -ne $1 ]; then
2043 __log_test_fail_status_code $1 $status
2047 if [ $# -gt 2 ]; then
2048 body=${res:0:${#res}-3}
2049 if [ "$A1PMS_VERSION" == "V2" ]; then
2050 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" )
2052 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" )
2054 if [ $res -ne 0 ]; then
2055 __log_test_fail_general "Could not create target ric info json"
2059 targetJson=$(<./tmp/.tmp_rics.json)
2060 if [ "$A1PMS_VERSION" == "V2" ]; then
2061 targetJson="{\"rics\": $targetJson }"
2063 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2064 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2065 if [ $res -ne 0 ]; then
2066 __log_test_fail_body
2071 __collect_endpoint_stats "A1PMS" 12 "GET" $A1PMS_API_PREFIX"/v2/rics" $status
2076 ##################################################################
2077 #### API Test case functions Service registry and supervision ####
2078 ##################################################################
2080 # API test function: PUT /service and V2 PUT /service
2081 # args: <response-code> <service-name> <keepalive-timeout> <callbackurl>
2082 # (Function for test scripts)
2083 a1pms_api_put_service() {
2085 if [ $# -ne 4 ]; then
2086 __print_err "<response-code> <service-name> <keepalive-timeout> <callbackurl>" $@
2090 if [ "$A1PMS_VERSION" == "V2" ]; then
2091 query="/v2/services"
2092 json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}"
2095 json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
2097 file="./tmp/.tmp.json"
2098 echo "$json" > $file
2100 res="$(__do_curl_to_api A1PMS PUT $query $file)"
2101 status=${res:${#res}-3}
2103 if [ $status -ne $1 ]; then
2104 __log_test_fail_status_code $1 $status
2108 __collect_endpoint_stats "A1PMS" 13 "PUT" $A1PMS_API_PREFIX"/v2/service" $status
2113 # API test function: GET /services and V2 GET /v2/services
2114 #args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
2115 # (Function for test scripts)
2116 a1pms_api_get_services() {
2118 #Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
2120 if [ $# -eq 1 ]; then
2122 elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
2124 elif [ $# -eq 5 ]; then
2126 elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
2128 if [ $(($argLen%3)) -eq 0 ]; then
2133 if [ $paramError -ne 0 ]; then
2134 __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
2138 if [ "$A1PMS_VERSION" == "V2" ]; then
2139 query="/v2/services"
2141 if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
2142 query="/v2/services?service_id="$2
2147 if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
2148 query="/services?name="$2
2151 res="$(__do_curl_to_api A1PMS GET $query)"
2152 status=${res:${#res}-3}
2154 if [ $status -ne $1 ]; then
2155 __log_test_fail_status_code $1 $status
2159 if [ $# -gt 2 ]; then
2160 variableArgCount=$(($#-2))
2161 body=${res:0:${#res}-3}
2165 while [ $cntr -lt $variableArgCount ]; do
2166 servicename=$1; shift;
2169 if [ $cntr -gt 0 ]; then
2170 targetJson=$targetJson","
2172 # timeSinceLastActivitySeconds value cannot be checked since value varies
2173 if [ "$A1PMS_VERSION" == "V2" ]; then
2174 targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}"
2176 targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
2180 targetJson=$targetJson"]"
2181 if [ "$A1PMS_VERSION" == "V2" ]; then
2182 targetJson="{\"service_list\": $targetJson }"
2184 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2185 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2186 if [ $res -ne 0 ]; then
2187 __log_test_fail_body
2192 __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
2197 # API test function: GET /services V2 GET /v2/services - (only checking service names)
2198 # args: <response-code> [<service-name>]*"
2199 # (Function for test scripts)
2200 a1pms_api_get_service_ids() {
2203 if [ $# -lt 1 ]; then
2204 __print_err "<response-code> [<service-name>]*" $@
2208 if [ "$A1PMS_VERSION" == "V2" ]; then
2209 query="/v2/services"
2213 res="$(__do_curl_to_api A1PMS GET $query)"
2214 status=${res:${#res}-3}
2216 if [ $status -ne $1 ]; then
2217 __log_test_fail_status_code $1 $status
2221 body=${res:0:${#res}-3}
2223 for rapp in ${@:2} ; do
2224 if [ "$targetJson" != "[" ]; then
2225 targetJson=$targetJson","
2227 if [ "$A1PMS_VERSION" == "V2" ]; then
2228 targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}"
2230 targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
2234 targetJson=$targetJson"]"
2235 if [ "$A1PMS_VERSION" == "V2" ]; then
2236 targetJson="{\"service_list\": $targetJson }"
2238 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2239 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2241 if [ $res -ne 0 ]; then
2242 __log_test_fail_body
2246 __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
2251 # API test function: DELETE /services and V2 DELETE /v2/services/{serviceId}
2252 # args: <response-code> <service-name>
2253 # (Function for test scripts)
2254 a1pms_api_delete_services() {
2257 if [ $# -ne 2 ]; then
2258 __print_err "<response-code> <service-name>" $@
2261 if [ "$A1PMS_VERSION" == "V2" ]; then
2262 query="/v2/services/"$2
2264 query="/services?name="$2
2266 res="$(__do_curl_to_api A1PMS DELETE $query)"
2267 status=${res:${#res}-3}
2269 if [ $status -ne $1 ]; then
2270 __log_test_fail_status_code $1 $status
2274 __collect_endpoint_stats "A1PMS" 15 "DELETE" $A1PMS_API_PREFIX"/v2/services/{serviceId}" $status
2279 # API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive
2280 # args: <response-code> <service-name>
2281 # (Function for test scripts)
2282 a1pms_api_put_services_keepalive() {
2285 if [ $# -ne 2 ]; then
2286 __print_err "<response-code> <service-name>" $@
2289 if [ "$A1PMS_VERSION" == "V2" ]; then
2290 query="/v2/services/$2/keepalive"
2292 query="/services/keepalive?name="$2
2295 res="$(__do_curl_to_api A1PMS PUT $query)"
2296 status=${res:${#res}-3}
2298 if [ $status -ne $1 ]; then
2299 __log_test_fail_status_code $1 $status
2303 __collect_endpoint_stats "A1PMS" 16 "PUT" $A1PMS_API_PREFIX"/v2/services/{service_id}/keepalive" $status
2308 ##################################################################
2309 #### API Test case functions Configuration ####
2310 ##################################################################
2312 # API Test function: PUT /v2/configuration
2313 # args: <response-code> <config-file>
2314 # (Function for test scripts)
2315 a1pms_api_put_configuration() {
2318 if [ "$A1PMS_VERSION" != "V2" ]; then
2319 __log_test_fail_not_supported
2323 if [ $# -ne 2 ]; then
2324 __print_err "<response-code> <config-file>" $@
2327 if [ ! -f $2 ]; then
2328 __log_test_fail_general "Config file "$2", does not exist"
2332 # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header
2333 # inputJson="{\"config\":"$inputJson"}"
2335 file="./tmp/.config.json"
2336 echo $inputJson > $file
2337 query="/v2/configuration"
2338 res="$(__do_curl_to_api A1PMS PUT $query $file)"
2339 status=${res:${#res}-3}
2341 if [ $status -ne $1 ]; then
2342 __log_test_fail_status_code $1 $status
2346 __collect_endpoint_stats "A1PMS" 17 "PUT" $A1PMS_API_PREFIX"/v2/configuration" $status
2351 # API Test function: GET /v2/configuration
2352 # args: <response-code> [<config-file>]
2353 # (Function for test scripts)
2354 a1pms_api_get_configuration() {
2357 if [ "$A1PMS_VERSION" != "V2" ]; then
2358 __log_test_fail_not_supported
2362 if [ $# -lt 1 ] || [ $# -gt 2 ]; then
2363 __print_err "<response-code> [<config-file>]" $@
2366 if [ ! -f $2 ]; then
2367 __log_test_fail_general "Config file "$2" for comparison, does not exist"
2371 query="/v2/configuration"
2372 res="$(__do_curl_to_api A1PMS GET $query)"
2373 status=${res:${#res}-3}
2375 if [ $status -ne $1 ]; then
2376 __log_test_fail_status_code $1 $status
2380 if [ $# -eq 2 ]; then
2382 body=${res:0:${#res}-3}
2385 # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header
2386 # inputJson="{\"config\":"$inputJson"}"
2388 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2389 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2391 if [ $res -ne 0 ]; then
2392 __log_test_fail_body
2397 __collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v2/configuration" $status
2402 ##########################################
2403 #### Reset types and instances ####
2404 ##########################################
2406 # Admin reset to remove all policies and services
2407 # All types and instances etc are removed - types and instances in a1 sims need to be removed separately
2408 # NOTE - only works in kubernetes and the pod should not be running
2410 # (Function for test scripts)
2412 a1pms_kube_pvc_reset() {
2415 pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE --no-headers -o custom-columns=":metadata.name" | grep policy)
2416 if [ -z "$pvc_name" ]; then
2417 pvc_name=policymanagementservice-vardata-pvc
2419 echo " Trying to reset pvc: "$pvc_name
2420 __kube_clean_pvc $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $A1PMS_CONTAINER_MNT_DIR
2426 # args: <realm> <client-name> <client-secret>
2427 a1pms_configure_sec() {
2428 export A1PMS_CREDS_GRANT_TYPE="client_credentials"
2429 export A1PMS_CREDS_CLIENT_SECRET=$3
2430 export A1PMS_CREDS_CLIENT_ID=$2
2431 export A1PMS_AUTH_SERVICE_URL=$KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token
2432 export A1PMS_SIDECAR_MOUNT="/token-cache"
2433 export A1PMS_SIDECAR_JWT_FILE=$A1PMS_SIDECAR_MOUNT"/jwt.txt"
2435 export AUTHSIDECAR_APP_NAME
2436 export AUTHSIDECAR_DISPLAY_NAME