3 # ============LICENSE_START===============================================
4 # Copyright (C) 2021-2023 Nordix Foundation. All rights reserved.
5 # ========================================================================
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
17 # ============LICENSE_END=================================================
20 # This is a script that contains management and test functions for A1PMS
22 ################ Test engine functions ################
24 # Create the image var used during the test
25 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
26 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
27 __A1PMS_imagesetup() {
28 __check_and_create_image_var A1PMS "A1PMS_IMAGE" "A1PMS_IMAGE_BASE" "A1PMS_IMAGE_TAG" $1 "$A1PMS_DISPLAY_NAME" ""
31 # Pull image from remote repo or use locally built image
32 # arg: <pull-policy-override> <pull-policy-original>
33 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
34 # <pull-policy-original> Shall be used for images that does not allow overriding
35 # Both var may contain: 'remote', 'remote-remove' or 'local'
37 __check_and_pull_image $1 "$A1PMS_DISPLAY_NAME" $A1PMS_APP_NAME A1PMS_IMAGE
40 # Build image (only for simulator or interfaces stubs owned by the test environment)
41 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
42 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
43 __A1PMS_imagebuild() {
44 echo -e $RED" Image for app A1PMS shall never be built"$ERED
47 # Generate a string for each included image using the app display name and a docker images format string
48 # If a custom image repo is used then also the source image from the local repo is listed
49 # arg: <docker-images-format-string> <file-to-append>
50 __A1PMS_image_data() {
51 echo -e "$A1PMS_DISPLAY_NAME\t$(docker images --format $1 $A1PMS_IMAGE)" >> $2
52 if [ ! -z "$A1PMS_IMAGE_SOURCE" ]; then
53 echo -e "-- source image --\t$(docker images --format $1 $A1PMS_IMAGE_SOURCE)" >> $2
57 # Scale kubernetes resources to zero
58 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
59 # This function is called for apps fully managed by the test script
60 __A1PMS_kube_scale_zero() {
61 __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
64 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
65 # This function is called for pre-started apps not managed by the test script.
66 __A1PMS_kube_scale_zero_and_wait() {
67 __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice
70 # Delete all kube resources for the app
71 # This function is called for apps managed by the test script.
72 __A1PMS_kube_delete_all() {
73 __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
77 # This function is called for apps managed by the test script.
78 # args: <log-dir> <file-prefix>
79 __A1PMS_store_docker_logs() {
80 if [ $RUNMODE == "KUBE" ]; then
81 kubectl $KUBECONF logs -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_a1pms.log 2>&1
83 docker logs $A1PMS_APP_NAME > $1$2_a1pms.log 2>&1
87 # Initial setup of protocol, host and ports
88 # This function is called for apps managed by the test script.
90 __A1PMS_initial_setup() {
92 export A1PMS_SIDECAR_JWT_FILE=""
95 # Set app short-name, app name and namespace for logging runtime statistics of kubernetes pods or docker containers
96 # For docker, the namespace shall be excluded
97 # This function is called for apps managed by the test script as well as for pre-started apps.
99 __A1PMS_statistics_setup() {
100 if [ $RUNMODE == "KUBE" ]; then
101 echo "A1PMS $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
103 echo "A1PMS $A1PMS_APP_NAME"
107 # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
109 __A1PMS_test_requirements() {
114 #######################################################
116 ###########################
118 ###########################
120 # Set http as the protocol to use for all communication to the A1PMS
122 # (Function for test scripts)
123 use_a1pms_rest_http() {
124 __a1pms_set_protocoll "http" $A1PMS_INTERNAL_PORT $A1PMS_EXTERNAL_PORT
127 # Set https as the protocol to use for all communication to the A1PMS
129 # (Function for test scripts)
130 use_a1pms_rest_https() {
131 __a1pms_set_protocoll "https" $A1PMS_INTERNAL_SECURE_PORT $A1PMS_EXTERNAL_SECURE_PORT
134 # All calls to the a1pms will be directed to the a1pms dmaap interface over http from now on
136 # (Function for test scripts)
137 use_a1pms_dmaap_http() {
138 echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
139 echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
140 A1PMS_ADAPTER_TYPE="MR-HTTP"
144 # All calls to the a1pms will be directed to the a1pms dmaap interface over https from now on
146 # (Function for test scripts)
147 use_a1pms_dmaap_https() {
148 echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD
149 echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms"
150 echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW
151 A1PMS_ADAPTER_TYPE="MR-HTTPS"
155 # Setup paths to svc/container for internal and external access
156 # args: <protocol> <internal-port> <external-port>
157 __a1pms_set_protocoll() {
158 echo -e $BOLD"$A1PMS_DISPLAY_NAME protocol setting"$EBOLD
159 echo -e " Using $BOLD $1 $EBOLD towards $A1PMS_DISPLAY_NAME"
161 ## Access to Dmaap adapter
163 A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME":"$2 # docker access, container->container and script->container via proxy
164 if [ $RUNMODE == "KUBE" ]; then
165 A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
168 # A1PMS_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
169 A1PMS_ADAPTER_TYPE="REST"
170 A1PMS_ADAPTER=$A1PMS_SERVICE_PATH
175 # Make curl retries towards the a1pms for http response codes set in this env var, space separated list of codes
178 #Save first worker node the pod is started on
179 __A1PMS_WORKER_NODE=""
181 # Export env vars for config files, docker compose and kube resources
182 # args: PROXY|NOPROXY
183 __export_a1pms_vars() {
185 export A1PMS_APP_NAME
186 export A1PMS_APP_NAME_ALIAS
187 export A1PMS_DISPLAY_NAME
189 export KUBE_NONRTRIC_NAMESPACE
191 export A1PMS_INTERNAL_PORT
192 export A1PMS_INTERNAL_SECURE_PORT
193 export A1PMS_EXTERNAL_PORT
194 export A1PMS_EXTERNAL_SECURE_PORT
195 export A1PMS_CONFIG_MOUNT_PATH
196 export A1PMS_DATA_MOUNT_PATH
197 export A1PMS_CONFIG_CONFIGMAP_NAME=$A1PMS_APP_NAME"-config"
198 export A1PMS_DATA_CONFIGMAP_NAME=$A1PMS_APP_NAME"-data"
199 export A1PMS_PKG_NAME
200 export A1PMS_CONFIG_KEY
201 export DOCKER_SIM_NWNAME
202 export A1PMS_HOST_MNT_DIR
203 export A1PMS_CONFIG_FILE
205 export A1PMS_DATA_PV_NAME=$A1PMS_APP_NAME"-pv"
206 export A1PMS_DATA_PVC_NAME=$A1PMS_APP_NAME"-pvc"
207 ##Create a unique path for the pv each time to prevent a previous volume to be reused
208 export A1PMS_PV_PATH="a1pmsdata-"$(date +%s)
209 export A1PMS_CONTAINER_MNT_DIR
210 export HOST_PATH_BASE_DIR
212 if [ $1 == "PROXY" ]; then
213 export A1PMS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
214 export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
215 if [ $A1PMS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$A1PMS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
216 echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
218 echo " Configured with http proxy"
221 export A1PMS_HTTP_PROXY_CONFIG_PORT=0
222 export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=""
223 echo " Configured without http proxy"
229 # args: (docker) PROXY|NOPROXY <config-file>
230 # args: (kube) PROXY|NOPROXY <config-file> [ <data-file>]
231 # (Function for test scripts)
233 echo -e $BOLD"Starting $A1PMS_DISPLAY_NAME"$EBOLD
235 if [ $RUNMODE == "KUBE" ]; then
237 # Check if app shall be fully managed by the test script
238 __check_included_image "A1PMS"
241 # Check if app shall only be used by the test script
242 __check_prestarted_image "A1PMS"
245 if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
246 echo -e $RED"The $A1PMS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
247 echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
250 if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
251 echo -e $RED"The $A1PMS_APP_NAME app is included both as managed and prestarted in this test script"$ERED
252 echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED
256 if [ $retcode_p -eq 0 ]; then
257 echo -e " Using existing $A1PMS_APP_NAME deployment and service"
258 echo " Setting $A1PMS_APP_NAME replicas=1"
259 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
260 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
263 if [ $retcode_i -eq 0 ]; then
265 echo -e " Creating $A1PMS_APP_NAME app and expose service"
267 #Check if nonrtric namespace exists, if not create it
268 __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE
270 __export_a1pms_vars $1
272 # Create config map for config
273 configfile=$PWD/tmp/$A1PMS_CONFIG_FILE
275 output_yaml=$PWD/tmp/a1pms-cfc.yaml
276 __kube_create_configmap $A1PMS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $configfile $output_yaml
278 # Create config map for data
279 data_json=$PWD/tmp/$A1PMS_DATA_FILE
280 if [ $# -lt 3 ]; then
281 #create empty dummy file
282 echo "{}" > $data_json
286 output_yaml=$PWD/tmp/a1pms-cfd.yaml
287 __kube_create_configmap $A1PMS_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml
290 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pv.yaml
291 output_yaml=$PWD/tmp/a1pms-pv.yaml
292 __kube_create_instance pv $A1PMS_APP_NAME $input_yaml $output_yaml
295 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pvc.yaml
296 output_yaml=$PWD/tmp/a1pms-pvc.yaml
297 __kube_create_instance pvc $A1PMS_APP_NAME $input_yaml $output_yaml
300 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"svc.yaml
301 output_yaml=$PWD/tmp/a1pmssvc.yaml
302 __kube_create_instance service $A1PMS_APP_NAME $input_yaml $output_yaml
305 input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"app.yaml
306 output_yaml=$PWD/tmp/a1pmsapp.yaml
307 if [ -z "$A1PMS_SIDECAR_JWT_FILE" ]; then
308 cat $input_yaml | sed '/#A1PMS_JWT_START/,/#A1PMS_JWT_STOP/d' > $PWD/tmp/a1pmsapp_tmp.yaml
309 input_yaml=$PWD/tmp/a1pmsapp_tmp.yaml
311 __kube_create_instance app $A1PMS_APP_NAME $input_yaml $output_yaml
315 # Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host
316 if [ $retcode_i -eq 0 ]; then
317 __A1PMS_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}')
318 if [ -z "$__A1PMS_WORKER_NODE" ]; then
319 echo -e $YELLOW" Cannot find worker node for pod for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
322 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
325 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
328 __check_included_image 'A1PMS'
329 if [ $? -eq 1 ]; then
330 echo -e $RED"The A1PMS app is not included in this test script"$ERED
331 echo -e $RED"The A1PMS will not be started"$ERED
338 cd $A1PMS_HOST_MNT_DIR
341 if [ "$(ls -A $DIR)" ]; then
342 echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD
343 rm -rf db/* &> /dev/null
344 if [ $? -ne 0 ]; then
345 echo -e $RED" Cannot remove database files in: $PWD"$ERED
350 echo " No files in mounted dir or dir does not exists"
355 __export_a1pms_vars $1
357 dest_file=$SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_HOST_MNT_DIR/application.yaml
359 envsubst < $2 > $dest_file
361 __start_container $A1PMS_COMPOSE_DIR "" NODOCKERARGS 1 $A1PMS_APP_NAME
363 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
366 __collect_endpoint_stats_image_info "A1PMS" $A1PMS_IMAGE
374 # (Function for test scripts)
376 echo -e $BOLD"Stopping $A1PMS_DISPLAY_NAME"$EBOLD
378 if [ $RUNMODE == "KUBE" ]; then
380 __check_prestarted_image "A1PMS"
381 if [ $? -eq 0 ]; then
382 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
383 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
384 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0
387 __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS
388 echo " Deleting the replica set - a new will be started when the app is started"
389 tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA")
390 if [ $? -ne 0 ]; then
391 echo -e $RED" Could not delete replica set "$RED
396 docker stop $A1PMS_APP_NAME &> ./tmp/.dockererr
397 if [ $? -ne 0 ]; then
398 __print_err "Could not stop $A1PMS_APP_NAME" $@
404 echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
409 # Start a previously stopped a1pms
411 # (Function for test scripts)
412 start_stopped_a1pms() {
413 echo -e $BOLD"Starting (the previously stopped) $A1PMS_DISPLAY_NAME"$EBOLD
415 if [ $RUNMODE == "KUBE" ]; then
417 __check_prestarted_image "A1PMS"
418 if [ $? -eq 0 ]; then
419 echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
420 res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
421 __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
422 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
426 # Tie the A1PMS to the same worker node it was initially started on
427 # A PVC of type hostPath is mounted to A1PMS, for persistent storage, so the A1PMS must always be on the node which mounted the volume
428 if [ -z "$__A1PMS_WORKER_NODE" ]; then
429 echo -e $RED" No initial worker node found for pod "$RED
433 echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__A1PMS_WORKER_NODE to deployment for $A1PMS_APP_NAME. Pod will always run on this worker node: $__A1PMS_WORKER_NODE"$BOLD
434 echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD
435 tmp=$(kubectl $KUBECONF patch deployment $A1PMS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__A1PMS_WORKER_NODE'"}}}}}')
436 if [ $? -ne 0 ]; then
437 echo -e $YELLOW" Cannot set nodeSelector to deployment for $A1PMS_APP_NAME, persistency may not work"$EYELLOW
439 __kube_scale deployment $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
442 docker start $A1PMS_APP_NAME &> ./tmp/.dockererr
443 if [ $? -ne 0 ]; then
444 __print_err "Could not start (the stopped) $A1PMS_APP_NAME" $@
450 __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL
451 if [ $? -ne 0 ]; then
459 # Function to prepare the a1pms configuration according to the current simulator configuration
460 # args: SDNC|NOSDNC <output-file> [ <sim-group> <adapter-class> ]
461 # (Function for test scripts)
462 prepare_a1pms_config() {
463 echo -e $BOLD"Prepare A1PMS config"$EBOLD
465 echo " Writing a1pms config for "$A1PMS_APP_NAME" to file: "$2
467 if [ $# != 2 ] && [ $# != 4 ]; then
469 __print_err "need two or four args, SDNC|NOSDNC <output-file> [ <sim-group> <adapter-class> ]" $@
473 if [ $1 == "SDNC" ]; then
474 echo -e " Config$BOLD including SDNC$EBOLD configuration"
475 elif [ $1 == "NOSDNC" ]; then
476 echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
479 __print_err "need three args, SDNC|NOSDNC <output-file> HEADER|NOHEADER" $@
484 if [ $1 == "SDNC" ]; then
485 config_json=$config_json"\n \"controller\": ["
486 config_json=$config_json"\n {"
487 config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
488 config_json=$config_json"\n \"baseUrl\": \"$SDNC_SERVICE_PATH\","
489 config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
490 config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
491 config_json=$config_json"\n }"
492 config_json=$config_json"\n ],"
494 if [[ "$A1PMS_FEATURE_LEVEL" == *"NO-DMAAP"* ]]; then
497 config_json=$config_json"\n \"streams_publishes\": {"
498 config_json=$config_json"\n \"dmaap_publisher\": {"
499 config_json=$config_json"\n \"type\": \"message-router\","
500 config_json=$config_json"\n \"dmaap_info\": {"
501 config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\""
502 config_json=$config_json"\n }"
503 config_json=$config_json"\n }"
504 config_json=$config_json"\n },"
505 config_json=$config_json"\n \"streams_subscribes\": {"
506 config_json=$config_json"\n \"dmaap_subscriber\": {"
507 config_json=$config_json"\n \"type\": \"message-router\","
508 config_json=$config_json"\n \"dmaap_info\": {"
509 config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\""
510 config_json=$config_json"\n }"
511 config_json=$config_json"\n }"
512 config_json=$config_json"\n },"
515 config_json=$config_json"\n \"ric\": ["
517 if [ $RUNMODE == "KUBE" ]; then
518 result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}')
521 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
522 for im in $result; do
523 if [[ $im != *"-0" ]]; then
524 ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
525 rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
526 let ric_cntr=ric_cntr+1
530 result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICMEDIATORSIM")].metadata.name}')
532 if [ $? -eq 0 ] && [ ! -z "$result" ]; then
533 for im in $result; do
534 if [[ $im != *"-0" ]]; then
535 ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
536 rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
537 oranrics=$oranrics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
538 let ric_cntr=ric_cntr+1
542 if [ $ric_cntr -eq 0 ]; then
543 echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW
546 oranrics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=orana1sim" --filter "status=running" --format {{.Names}})
547 if [ $? -ne 0 ] || [ -z "$oranrics" ]; then
548 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
553 rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=a1sim" --filter "status=running" --format {{.Names}})
554 if [[ "$oranrics" == "" ]]; then
555 if [ $? -ne 0 ] || [ -z "$rics" ]; then
556 echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
561 rics="$rics $oranrics"
565 if [ $cntr -gt 0 ]; then
566 config_json=$config_json"\n ,"
568 config_json=$config_json"\n {"
569 if [ $RUNMODE == "KUBE" ]; then
570 ric_id=${ric%.*.*} #extract pod id from full hosthame
571 ric_id=$(echo "$ric_id" | tr '-' '_')
573 ric_id=$(echo "$ric" | tr '-' '_') #ric var still needs underscore as it is different from the container name
575 echo " Found a1 sim: "$ric
576 config_json=$config_json"\n \"name\": \"$ric_id\","
579 for xric in $oranrics; do
580 if [ $xric == $ric ]; then
584 if [ $xricfound -eq 0 ]; then
585 config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
587 config_json=$config_json"\n \"baseUrl\": \"$RICMEDIATOR_SIM_HTTPX://$ric:$RICMEDIATOR_SIM_PORT\","
589 if [ ! -z "$3" ]; then
590 if [[ $ric == "$3"* ]]; then
591 config_json=$config_json"\n \"customAdapterClass\": \"$4\","
594 if [ $1 == "SDNC" ]; then
595 config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
597 config_json=$config_json"\n \"managedElementIds\": ["
598 config_json=$config_json"\n \"me1_$ric_id\","
599 config_json=$config_json"\n \"me2_$ric_id\""
600 config_json=$config_json"\n ]"
601 config_json=$config_json"\n }"
605 config_json=$config_json"\n ]"
606 config_json=$config_json"\n}"
608 config_json="{\"config\":"$config_json"}"
610 printf "$config_json">$2
615 # Load the the appl config for the a1pms into a config map
616 a1pms_load_config() {
617 echo -e $BOLD"A1PMS - load config from "$EBOLD$1
618 data_json=$PWD/tmp/$A1PMS_DATA_FILE
620 output_yaml=$PWD/tmp/a1pms-cfd.yaml
621 __kube_create_configmap $A1PMS_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml
626 # Turn on debug level tracing in the a1pms
628 # (Function for test scripts)
630 echo -e $BOLD"Setting a1pms debug logging"$EBOLD
631 curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
632 result=$(__do_curl "$curlString")
633 if [ $? -ne 0 ]; then
634 __print_err "could not set debug mode" $@
642 # Turn on trace level tracing in the a1pms
644 # (Function for test scripts)
646 echo -e $BOLD"Setting a1pms trace logging"$EBOLD
647 curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
648 result=$(__do_curl "$curlString")
649 if [ $? -ne 0 ]; then
650 __print_err "could not set trace mode" $@
658 # Perform curl retries when making direct call to the a1pms for the specified http response codes
659 # Speace separated list of http response codes
660 # args: [<response-code>]*
661 use_a1pms_retries() {
662 echo -e $BOLD"Do curl retries to the a1pms REST inteface for these response codes:$@"$EBOLD
668 # Check the a1pms logs for WARNINGs and ERRORs
670 # (Function for test scripts)
672 __check_container_logs "A1PMS" $A1PMS_APP_NAME $A1PMS_LOGPATH WARN ERR
675 #########################################################
676 #### Test case functions A1 Policy management service
677 #########################################################
679 # This function compare the size, towards a target value, of a json array returned from <url> of the A1PMS.
680 # This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
681 # args: json:<url> <target-value> [<timeout-in-seconds]
682 # (Function for test scripts)
684 echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
685 if [ $# -eq 2 ] || [ $# -eq 3 ]; then
686 if [[ $1 == "json:"* ]]; then
687 if [ "$A1PMS_VERSION" == "V2" ]; then
688 __var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v2/" $1 "=" $2 $3
690 __var_test "A1PMS" $A1PMS_SERVICE_PATH"/" $1 "=" $2 $3
695 __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
699 # API Test function: GET /policies and V2 GET /v2/policy-instances
700 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
701 # args(V2): <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]
702 # (Function for test scripts)
703 a1pms_api_get_policies() {
706 if [ "$A1PMS_VERSION" == "V2" ]; then
708 variableParams=$(($#-4))
709 if [ $# -lt 4 ]; then
711 elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
713 elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then
717 if [ $paramError -ne 0 ]; then
718 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]" $@
723 variableParams=$(($#-4))
724 if [ $# -lt 4 ]; then
726 elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
728 elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then
732 if [ $paramError -ne 0 ]; then
733 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
739 if [ "$A1PMS_VERSION" == "V2" ]; then
740 if [ $2 != "NORIC" ]; then
741 queryparams="?ric_id="$2
743 if [ $3 != "NOSERVICE" ]; then
744 if [ -z $queryparams ]; then
745 queryparams="?service_id="$3
747 queryparams=$queryparams"&service_id="$3
750 if [ $4 != "NOTYPE" ]; then
751 if [ -z $queryparams ]; then
752 queryparams="?policytype_id="$4
754 queryparams=$queryparams"&policytype_id="$4
758 query="/v2/policy-instances"$queryparams
759 res="$(__do_curl_to_api A1PMS GET $query)"
760 status=${res:${#res}-3}
762 if [ $status -ne $1 ]; then
763 __log_test_fail_status_code $1 $status
767 if [ $# -gt 4 ]; then
768 body=${res:0:${#res}-3}
769 if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
775 for ((i=0; i<$(($#-4)); i=i+7)); do
777 if [ "$targetJson" != "[" ]; then
778 targetJson=$targetJson","
780 targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":"
781 if [ "${arr[$i+3]}" == "EMPTY" ]; then
782 targetJson=$targetJson"\"\","
784 targetJson=$targetJson"\"${arr[$i+3]}\","
786 targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\","
788 sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file
790 targetJson=$targetJson"\"policy_data\":"$json"}"
794 targetJson=$targetJson"]"
795 targetJson="{\"policies\": $targetJson}"
796 echo "TARGET JSON: $targetJson" >> $HTTPLOG
797 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
799 if [ $res -ne 0 ]; then
805 if [ $2 != "NORIC" ]; then
806 queryparams="?ric="$2
808 if [ $3 != "NOSERVICE" ]; then
809 if [ -z $queryparams ]; then
810 queryparams="?service="$3
812 queryparams=$queryparams"&service="$3
815 if [ $4 != "NOTYPE" ]; then
816 if [ -z $queryparams ]; then
817 queryparams="?type="$4
819 queryparams=$queryparams"&type="$4
823 query="/policies"$queryparams
824 res="$(__do_curl_to_api A1PMS GET $query)"
825 status=${res:${#res}-3}
827 if [ $status -ne $1 ]; then
828 __log_test_fail_status_code $1 $status
832 if [ $# -gt 4 ]; then
833 if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
836 body=${res:0:${#res}-3}
840 for ((i=0; i<$(($#-4)); i=i+5)); do
842 if [ "$targetJson" != "[" ]; then
843 targetJson=$targetJson","
845 targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
846 if [ "${arr[$i+3]}" == "EMPTY" ]; then
847 targetJson=$targetJson"\"\","
849 targetJson=$targetJson"\"${arr[$i+3]}\","
852 sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
854 targetJson=$targetJson"\"json\":"$json"}"
858 targetJson=$targetJson"]"
859 echo "TARGET JSON: $targetJson" >> $HTTPLOG
860 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
862 if [ $res -ne 0 ]; then
868 __collect_endpoint_stats "A1PMS" 00 "GET" $A1PMS_API_PREFIX"/v2/policy-instances" $status
875 # API Test function: GET /policy and V2 GET /v2/policies/{policy_id}
876 # args: <response-code> <policy-id> [<template-file>]
877 # args(V2): <response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]
879 # (Function for test scripts)
880 a1pms_api_get_policy() {
884 if [ "$A1PMS_VERSION" == "V2" ]; then
885 if [ $# -ne 2 ] && [ $# -ne 8 ]; then
886 __print_err "<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]" $@
889 query="/v2/policies/$UUID$2"
891 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
892 __print_err "<response-code> <policy-id> [<template-file>] " $@
895 query="/policy?id=$UUID$2"
897 res="$(__do_curl_to_api A1PMS GET $query)"
898 status=${res:${#res}-3}
900 if [ $status -ne $1 ]; then
901 __log_test_fail_status_code $1 $status
905 if [ "$A1PMS_VERSION" == "V2" ]; then
906 if [ $# -eq 8 ]; then
908 #Create a policy json to compare with
909 body=${res:0:${#res}-3}
911 targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\""
912 if [ $7 != "NOTRANSIENT" ]; then
913 targetJson=$targetJson", \"transient\":$7"
915 if [ $6 != "NOTYPE" ]; then
916 targetJson=$targetJson", \"policytype_id\":\"$6\""
918 targetJson=$targetJson", \"policytype_id\":\"\""
920 if [ $8 != "NOURL" ]; then
921 targetJson=$targetJson", \"status_notification_uri\":\"$8\""
924 data=$(sed 's/XXX/'${2}'/g' $3)
925 targetJson=$targetJson", \"policy_data\":$data"
926 targetJson="{$targetJson}"
928 echo "TARGET JSON: $targetJson" >> $HTTPLOG
929 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
930 if [ $res -ne 0 ]; then
936 if [ $# -eq 3 ]; then
937 #Create a policy json to compare with
938 body=${res:0:${#res}-3}
940 sed 's/XXX/'${2}'/g' $3 > $file
941 targetJson=$(< $file)
942 echo "TARGET JSON: $targetJson" >> $HTTPLOG
943 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
944 if [ $res -ne 0 ]; then
950 __collect_endpoint_stats "A1PMS" 01 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status
955 # API Test function: PUT /policy and V2 PUT /policies
956 # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]
957 # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]
958 # (Function for test scripts)
959 a1pms_api_put_policy() {
962 if [ "$A1PMS_VERSION" == "V2" ]; then
963 if [ $# -lt 8 ] || [ $# -gt 9 ]; then
964 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]" $@
968 if [ $# -lt 7 ] || [ $# -gt 8 ]; then
969 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@
982 if [ "$A1PMS_VERSION" == "V2" ]; then
985 if [ $# -eq 9 ]; then
990 if [ $# -eq 8 ]; then
995 while [ $count -lt $max ]; do
996 if [ "$A1PMS_VERSION" == "V2" ]; then
1000 inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
1001 if [ $trans != "NOTRANSIENT" ]; then
1002 inputJson=$inputJson", \"transient\":$trans"
1004 if [ $pt != "NOTYPE" ]; then
1005 inputJson=$inputJson", \"policytype_id\":\"$pt\""
1007 inputJson=$inputJson", \"policytype_id\":\"\""
1009 if [ $noti != "NOURL" ]; then
1010 inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
1012 file="./tmp/.p.json"
1013 data=$(sed 's/XXX/'${pid}'/g' $temp)
1014 inputJson=$inputJson", \"policy_data\":$data"
1015 inputJson="{$inputJson}"
1016 echo $inputJson > $file
1018 query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
1020 if [ $pt != "NOTYPE" ]; then
1021 query=$query"&type=$pt"
1024 if [ $trans != NOTRANSIENT ]; then
1025 query=$query"&transient=$trans"
1028 file="./tmp/.p.json"
1029 sed 's/XXX/'${pid}'/g' $temp > $file
1031 res="$(__do_curl_to_api A1PMS PUT $query $file)"
1032 status=${res:${#res}-3}
1033 echo -ne " Executing "$count"("$max")${SAMELINE}"
1034 if [ $status -ne $1 ]; then
1035 echo " Executed "$count"?("$max")"
1036 __log_test_fail_status_code $1 $status
1041 echo -ne " Executed "$count"("$max")${SAMELINE}"
1043 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $status $max
1050 # API Test function: PUT /policy and V2 PUT /policies, to run in batch
1051 # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]
1052 # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]
1053 # (Function for test scripts)
1055 a1pms_api_put_policy_batch() {
1058 if [ "$A1PMS_VERSION" == "V2" ]; then
1059 if [ $# -lt 8 ] || [ $# -gt 9 ]; then
1060 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]" $@
1064 if [ $# -lt 7 ] || [ $# -gt 8 ]; then
1065 __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]" $@
1077 if [ "$A1PMS_VERSION" == "V2" ]; then
1080 if [ $# -eq 9 ]; then
1085 if [ $# -eq 8 ]; then
1091 while [ $count -lt $max ]; do
1092 if [ "$A1PMS_VERSION" == "V2" ]; then
1093 query="/v2/policies"
1095 inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
1096 if [ $trans != "NOTRANSIENT" ]; then
1097 inputJson=$inputJson", \"transient\":$trans"
1099 if [ $pt != "NOTYPE" ]; then
1100 inputJson=$inputJson", \"policytype_id\":\"$pt\""
1102 inputJson=$inputJson", \"policytype_id\":\"\""
1104 if [ $noti != "NOURL" ]; then
1105 inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
1107 file="./tmp/.p.json"
1108 data=$(sed 's/XXX/'${pid}'/g' $temp)
1109 inputJson=$inputJson", \"policy_data\":$data"
1110 inputJson="{$inputJson}"
1111 echo $inputJson > $file
1113 query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
1115 if [ $pt != "NOTYPE" ]; then
1116 query=$query"&type=$pt"
1119 if [ $trans != NOTRANSIENT ]; then
1120 query=$query"&transient=$trans"
1122 file="./tmp/.p.json"
1123 sed 's/XXX/'${pid}'/g' $temp > $file
1125 res="$(__do_curl_to_api A1PMS PUT_BATCH $query $file)"
1126 status=${res:${#res}-3}
1127 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
1129 if [ $status -ne 200 ]; then
1130 echo " Requested(batch) "$count"?("$max")"
1131 __log_test_fail_status_code 200 $status
1134 cid=${res:0:${#res}-3}
1138 echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
1145 res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
1146 status=${res:${#res}-3}
1147 echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}"
1149 if [ $status -ne $1 ]; then
1150 echo " Accepted(batch) "$count"?("$max")"
1151 __log_test_fail_status_code $1 $status
1156 echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}"
1158 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $1 $max
1166 # API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics
1167 # args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
1168 # args(V2): <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>
1169 # (Function for test scripts)
1170 a1pms_api_put_policy_parallel() {
1173 if [ "$A1PMS_VERSION" == "V2" ]; then
1174 if [ $# -ne 11 ]; then
1175 __print_err "<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>" $@
1179 if [ $# -ne 10 ]; then
1180 __print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@
1184 resp_code=$1; shift;
1190 transient=$1; shift;
1191 if [ "$A1PMS_VERSION" == "V2" ]; then
1200 #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
1201 if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
1202 echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
1203 echo " Info - will execute over a1pms REST"
1205 if [ "$A1PMS_VERSION" == "V2" ]; then
1206 if [ $serv == "NOSERVICE" ]; then
1209 query="$A1PMS_API_PREFIX/v2/policies"
1211 if [ $serv == "NOSERVICE" ]; then
1214 query="/policy?service=$serv"
1216 if [ $type != "NOTYPE" ]; then
1217 query=$query"&type=$type"
1220 if [ $transient != NOTRANSIENT ]; then
1221 query=$query"&transient=$transient"
1225 urlbase=${A1PMS_ADAPTER}${query}
1228 if [ ! -z "$KUBE_PROXY_PATH" ]; then
1229 httpproxy=$KUBE_PROXY_PATH
1232 for ((i=1; i<=$pids; i++))
1235 if [ -z "$uuid" ]; then
1238 echo "" > "./tmp/.pid${i}.res.txt"
1239 if [ "$A1PMS_VERSION" == "V2" ]; then
1240 echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
1242 echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
1245 done | xargs -n 1 -I{} -P $pids bash -c '{
1247 echo " Parallel process $arg started"
1248 tmp=$(< "./tmp/.pid${arg}.txt")
1249 python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt
1252 for ((i=1; i<=$pids; i++))
1254 file="./tmp/.pid${i}.res.txt"
1256 if [ -z "$tmp" ]; then
1257 echo " Process $i : unknown result (result file empty"
1261 if [ $res == "0" ]; then
1262 echo " Process $i : OK - "${tmp:1}
1264 echo " Process $i : failed - "${tmp:1}
1269 if [ -z $msg ]; then
1270 __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $resp_code $(($count*$num_rics))
1271 __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
1275 __log_test_fail_general "One of more processes failed to execute"
1279 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}
1280 # args: <response-code> <policy-id> [count]
1281 # (Function for test scripts)
1282 a1pms_api_delete_policy() {
1285 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1286 __print_err "<response-code> <policy-id> [count]" $@
1293 if [ $# -eq 3 ]; then
1299 while [ $count -lt $max ]; do
1300 if [ "$A1PMS_VERSION" == "V2" ]; then
1301 query="/v2/policies/"$UUID$pid
1303 query="/policy?id="$UUID$pid
1305 res="$(__do_curl_to_api A1PMS DELETE $query)"
1306 status=${res:${#res}-3}
1307 echo -ne " Executing "$count"("$max")${SAMELINE}"
1309 if [ $status -ne $1 ]; then
1310 echo " Executed "$count"?("$max")"
1311 __log_test_fail_status_code $1 $status
1317 echo -ne " Executed "$count"("$max")${SAMELINE}"
1319 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status $max
1326 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch
1327 # args: <response-code> <policy-id> [count]
1328 # (Function for test scripts)
1329 a1pms_api_delete_policy_batch() {
1332 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1333 __print_err "<response-code> <policy-id> [count]" $@
1340 if [ $# -eq 3 ]; then
1346 while [ $count -lt $max ]; do
1347 if [ "$A1PMS_VERSION" == "V2" ]; then
1348 query="/v2/policies/"$UUID$pid
1350 query="/policy?id="$UUID$pid
1352 res="$(__do_curl_to_api A1PMS DELETE_BATCH $query)"
1353 status=${res:${#res}-3}
1354 echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
1356 if [ $status -ne 200 ]; then
1357 echo " Requested(batch) "$count"?("$max")"
1358 __log_test_fail_status_code 200 $status
1361 cid=${res:0:${#res}-3}
1365 echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
1373 res="$(__do_curl_to_api A1PMS RESPONSE $cid)"
1374 status=${res:${#res}-3}
1375 echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}"
1377 if [ $status -ne $1 ]; then
1378 echo " Deleted(batch) "$count"?("$max")"
1379 __log_test_fail_status_code $1 $status
1384 echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}"
1386 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max
1394 # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics
1395 # args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
1396 # (Function for test scripts)
1397 a1pms_api_delete_policy_parallel() {
1400 if [ $# -ne 5 ]; then
1401 __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@
1404 resp_code=$1; shift;
1410 #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then
1411 if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then
1412 echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported"
1413 echo " Info - will execute over a1pms REST"
1416 if [ "$A1PMS_VERSION" == "V2" ]; then
1417 query="$A1PMS_API_PREFIX/v2/policies/"
1422 urlbase=${A1PMS_ADAPTER}${query}
1425 if [ ! -z "$KUBE_PROXY_PATH" ]; then
1426 httpproxy=$KUBE_PROXY_PATH
1429 for ((i=1; i<=$pids; i++))
1432 if [ -z "$uuid" ]; then
1435 echo "" > "./tmp/.pid${i}.del.res.txt"
1436 echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy> "./tmp/.pid${i}.del.txt"
1438 done | xargs -n 1 -I{} -P $pids bash -c '{
1440 echo " Parallel process $arg started"
1441 tmp=$(< "./tmp/.pid${arg}.del.txt")
1442 python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt
1445 for ((i=1; i<=$pids; i++))
1447 file="./tmp/.pid${i}.del.res.txt"
1449 if [ -z "$tmp" ]; then
1450 echo " Process $i : unknown result (result file empty"
1454 if [ $res == "0" ]; then
1455 echo " Process $i : OK - "${tmp:1}
1457 echo " Process $i : failed - "${tmp:1}
1462 if [ -z $msg ]; then
1463 __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count*$num_rics))
1464 __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
1468 __log_test_fail_general "One of more processes failed to execute"
1472 # API Test function: GET /policy_ids and V2 GET /v2/policies
1473 # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
1474 # (Function for test scripts)
1475 a1pms_api_get_policy_ids() {
1478 if [ $# -lt 4 ]; then
1479 __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
1485 if [ "$A1PMS_VERSION" == "V2" ]; then
1486 if [ $2 != "NORIC" ]; then
1487 queryparams="?ric_id="$2
1490 if [ $3 != "NOSERVICE" ]; then
1491 if [ -z $queryparams ]; then
1492 queryparams="?service_id="$3
1494 queryparams=$queryparams"&service_id="$3
1497 if [ $4 != "NOTYPE" ]; then
1498 if [ -z $queryparams ]; then
1499 queryparams="?policytype_id="$4
1501 queryparams=$queryparams"&policytype_id="$4
1505 query="/v2/policies"$queryparams
1507 if [ $2 != "NORIC" ]; then
1508 queryparams="?ric="$2
1511 if [ $3 != "NOSERVICE" ]; then
1512 if [ -z $queryparams ]; then
1513 queryparams="?service="$3
1515 queryparams=$queryparams"&service="$3
1518 if [ $4 != "NOTYPE" ]; then
1519 if [ -z $queryparams ]; then
1520 queryparams="?type="$4
1522 queryparams=$queryparams"&type="$4
1526 query="/policy_ids"$queryparams
1529 res="$(__do_curl_to_api A1PMS GET $query)"
1530 status=${res:${#res}-3}
1532 if [ $status -ne $1 ]; then
1533 __log_test_fail_status_code $1 $status
1537 if [ $# -gt 4 ]; then
1538 body=${res:0:${#res}-3}
1541 for pid in ${@:5} ; do
1542 if [ "$targetJson" != "[" ]; then
1543 targetJson=$targetJson","
1545 if [ $pid != "NOID" ]; then
1546 targetJson=$targetJson"\"$UUID$pid\""
1550 targetJson=$targetJson"]"
1551 if [ "$A1PMS_VERSION" == "V2" ]; then
1552 targetJson="{\"policy_ids\": $targetJson}"
1554 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1555 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1557 if [ $res -ne 0 ]; then
1558 __log_test_fail_body
1563 __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies" $status
1568 # API Test function: V2 GET /v2/policy-types/{policyTypeId}
1569 # args(V2): <response-code> <policy-type-id> [<schema-file>]
1570 # (Function for test scripts)
1571 a1pms_api_get_policy_type() {
1574 if [ "$A1PMS_VERSION" != "V2" ]; then
1575 __log_test_fail_not_supported
1579 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1580 __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
1583 query="/v2/policy-types/$2"
1585 res="$(__do_curl_to_api A1PMS GET $query)"
1586 status=${res:${#res}-3}
1588 if [ $status -ne $1 ]; then
1589 __log_test_fail_status_code $1 $status
1593 if [ $# -eq 3 ]; then
1595 body=${res:0:${#res}-3}
1598 targetJson="{\"policy_schema\":$targetJson}"
1599 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1600 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1602 if [ $res -ne 0 ]; then
1603 __log_test_fail_body
1608 __collect_endpoint_stats "A1PMS" 05 "GET" $A1PMS_API_PREFIX"/v2/policy-types/{policyTypeId}" $status
1613 # API Test function: GET /policy_schema
1614 # args: <response-code> <policy-type-id> [<schema-file>]
1615 # (Function for test scripts)
1616 a1pms_api_get_policy_schema() {
1619 if [ "$A1PMS_VERSION" == "V2" ]; then
1620 __log_test_fail_not_supported
1624 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1625 __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
1628 query="/policy_schema?id=$2"
1629 res="$(__do_curl_to_api A1PMS GET $query)"
1630 status=${res:${#res}-3}
1632 if [ $status -ne $1 ]; then
1633 __log_test_fail_status_code $1 $status
1637 if [ $# -eq 3 ]; then
1639 body=${res:0:${#res}-3}
1643 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1644 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1646 if [ $res -ne 0 ]; then
1647 __log_test_fail_body
1652 __collect_endpoint_stats "A1PMS" 06 "GET" $A1PMS_API_PREFIX"/v2/policy_schema" $status
1657 # API Test function: GET /policy_schemas
1658 # args: <response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*
1659 # args(V2): <response-code>
1660 # (Function for test scripts)
1661 a1pms_api_get_policy_schemas() {
1664 if [ "$A1PMS_VERSION" == "V2" ]; then
1665 if [ $# -ne 1 ]; then
1666 __print_err "<response-code>" $@
1670 if [ $# -lt 2 ]; then
1671 __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
1675 if [ "$A1PMS_VERSION" == "V2" ]; then
1676 query="/v2/policy-schemas"
1678 query="/policy_schemas"
1679 if [ $2 != "NORIC" ]; then
1680 query=$query"?ric="$2
1684 res="$(__do_curl_to_api A1PMS GET $query)"
1685 status=${res:${#res}-3}
1687 if [ $status -ne $1 ]; then
1688 __log_test_fail_status_code $1 $status
1692 if [ $# -gt 2 ]; then
1693 body=${res:0:${#res}-3}
1696 for file in ${@:3} ; do
1697 if [ "$targetJson" != "[" ]; then
1698 targetJson=$targetJson","
1700 if [ $file == "NOFILE" ]; then
1701 targetJson=$targetJson"{}"
1703 targetJson=$targetJson$(< $file)
1707 targetJson=$targetJson"]"
1708 if [ "$A1PMS_VERSION" == "V2" ]; then
1709 targetJson="{\"policy_schemas\": $targetJson }"
1711 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1712 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1714 if [ $res -ne 0 ]; then
1715 __log_test_fail_body
1720 __collect_endpoint_stats "A1PMS" 07 "GET" $A1PMS_API_PREFIX"/v2/policy-schemas" $status
1725 # API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status
1726 # arg: <response-code> <policy-id> [ (STD|STD2 <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>) ]
1727 # (Function for test scripts)
1728 a1pms_api_get_policy_status() {
1731 if [ $# -lt 2 ] || [ $# -gt 5 ]; then
1732 __print_err "<response-code> <policy-id> [(STD <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>)]" $@
1737 if [ $# -eq 2 ]; then
1739 elif [ "$3" == "STD" ]; then
1740 targetJson="{\"enforceStatus\":\"$4\""
1741 if [ $# -eq 5 ]; then
1742 targetJson=$targetJson",\"reason\":\"$5\""
1744 targetJson=$targetJson"}"
1745 elif [ "$3" == "STD2" ]; then
1746 if [ $4 == "EMPTY" ]; then
1747 targetJson="{\"enforceStatus\":\"\""
1749 targetJson="{\"enforceStatus\":\"$4\""
1751 if [ $# -eq 5 ]; then
1752 if [ $5 == "EMPTY" ]; then
1753 targetJson=$targetJson",\"enforceReason\":\"\""
1755 targetJson=$targetJson",\"enforceReason\":\"$5\""
1758 targetJson=$targetJson"}"
1759 elif [ "$3" == "OSC" ]; then
1760 targetJson="{\"instance_status\":\"$4\""
1761 if [ $# -eq 5 ]; then
1762 targetJson=$targetJson",\"has_been_deleted\":\"$5\""
1764 targetJson=$targetJson",\"created_at\":\"????\"}"
1766 __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
1770 if [ "$A1PMS_VERSION" == "V2" ]; then
1771 query="/v2/policies/$UUID$2/status"
1772 targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}"
1774 query="/policy_status?id="$UUID$2
1777 res="$(__do_curl_to_api A1PMS GET $query)"
1778 status=${res:${#res}-3}
1780 if [ $status -ne $1 ]; then
1781 __log_test_fail_status_code $1 $status
1784 if [ $# -gt 2 ]; then
1785 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1786 body=${res:0:${#res}-3}
1787 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1789 if [ $res -ne 0 ]; then
1790 __log_test_fail_body
1794 __collect_endpoint_stats "A1PMS" 08 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status
1799 # API Test function: GET /policy_types and V2 GET /v2/policy-types
1800 # args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
1801 # (Function for test scripts)
1802 a1pms_api_get_policy_types() {
1805 if [ $# -lt 1 ]; then
1806 __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
1810 if [ "$A1PMS_VERSION" == "V2" ]; then
1811 if [ $# -eq 1 ]; then
1812 query="/v2/policy-types"
1813 elif [ $2 == "NORIC" ]; then
1814 query="/v2/policy-types"
1816 query="/v2/policy-types?ric_id=$2"
1819 if [ $# -eq 1 ]; then
1820 query="/policy_types"
1821 elif [ $2 == "NORIC" ]; then
1822 query="/policy_types"
1824 query="/policy_types?ric=$2"
1828 res="$(__do_curl_to_api A1PMS GET $query)"
1829 status=${res:${#res}-3}
1831 if [ $status -ne $1 ]; then
1832 __log_test_fail_status_code $1 $status
1836 if [ $# -gt 2 ]; then
1837 body=${res:0:${#res}-3}
1840 for pid in ${@:3} ; do
1841 if [ "$targetJson" != "[" ]; then
1842 targetJson=$targetJson","
1844 if [ $pid == "EMPTY" ]; then
1847 targetJson=$targetJson"\"$pid\""
1850 targetJson=$targetJson"]"
1851 if [ "$A1PMS_VERSION" == "V2" ]; then
1852 targetJson="{\"policytype_ids\": $targetJson }"
1854 echo "TARGET JSON: $targetJson" >> $HTTPLOG
1855 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1857 if [ $res -ne 0 ]; then
1858 __log_test_fail_body
1863 __collect_endpoint_stats "A1PMS" 09 "GET" $A1PMS_API_PREFIX"/v2/policy-types" $status
1868 #########################################################
1869 #### Test case functions Health check
1870 #########################################################
1872 # API Test function: GET /status and V2 GET /status
1873 # args: <response-code>
1874 # (Function for test scripts)
1875 a1pms_api_get_status() {
1877 if [ $# -ne 1 ]; then
1878 __print_err "<response-code>" $@
1881 if [ "$A1PMS_VERSION" == "V2" ]; then
1886 res="$(__do_curl_to_api A1PMS GET $query)"
1887 status=${res:${#res}-3}
1889 if [ $status -ne $1 ]; then
1890 __log_test_fail_status_code $1 $status
1894 __collect_endpoint_stats "A1PMS" 10 "GET" $A1PMS_API_PREFIX"/v2/status" $status
1899 # API Test function: GET /status (root) without api prefix
1900 # args: <response-code>
1901 # (Function for test scripts)
1902 a1pms_api_get_status_root() {
1904 if [ $# -ne 1 ]; then
1905 __print_err "<response-code>" $@
1909 TMP_PREFIX=$A1PMS_API_PREFIX
1911 res="$(__do_curl_to_api A1PMS GET $query)"
1912 A1PMS_API_PREFIX=$TMP_PREFIX
1913 status=${res:${#res}-3}
1915 if [ $status -ne $1 ]; then
1916 __log_test_fail_status_code $1 $status
1920 __collect_endpoint_stats "A1PMS" 19 "GET" "/status" $status
1925 #########################################################
1926 #### Test case functions RIC Repository
1927 #########################################################
1929 # API Test function: GET /ric and V2 GET /v2/rics/ric
1930 # args: <reponse-code> <management-element-id> [<ric-id>]
1931 # (V2) args: <reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [<string-of-ricinfo>]
1932 # (V2) example of <string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4"
1933 # (V2) format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
1936 # (Function for test scripts)
1937 a1pms_api_get_ric() {
1940 if [ "$A1PMS_VERSION" == "V2" ]; then
1941 if [ $# -lt 3 ]; then
1942 __print_err "<reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [string-of-ricinfo>]" $@
1946 if [ $2 != "NOME" ]; then
1947 search="?managed_element_id="$2
1949 if [ $3 != "NORIC" ]; then
1950 if [ -z $search ]; then
1953 search=$search"&ric_id="$3
1956 query="/v2/rics/ric"$search
1958 res="$(__do_curl_to_api A1PMS GET $query)"
1959 status=${res:${#res}-3}
1961 if [ $status -ne $1 ]; then
1962 __log_test_fail_status_code $1 $status
1966 if [ $# -gt 3 ]; then
1967 body=${res:0:${#res}-3}
1968 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" )
1969 if [ $res -ne 0 ]; then
1970 __log_test_fail_general "Could not create target ric info json"
1974 targetJson=$(<./tmp/.tmp_rics.json)
1975 targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets
1976 echo " TARGET JSON: $targetJson" >> $HTTPLOG
1977 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
1978 if [ $res -ne 0 ]; then
1979 __log_test_fail_body
1984 if [ $# -lt 2 ] || [ $# -gt 3 ]; then
1985 __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
1989 query="/ric?managedElementId="$2
1991 res="$(__do_curl_to_api A1PMS GET $query)"
1992 status=${res:${#res}-3}
1994 if [ $status -ne $1 ]; then
1995 __log_test_fail_status_code $1 $status
1999 if [ $# -eq 3 ]; then
2000 body=${res:0:${#res}-3}
2001 if [ "$body" != "$3" ]; then
2002 __log_test_fail_body
2008 __collect_endpoint_stats "A1PMS" 11 "GET" $A1PMS_API_PREFIX"/v2/rics/ric" $status
2013 # API test function: GET /rics and V2 GET /v2/rics
2014 # args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
2015 # example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
2016 # format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
2017 # (Function for test scripts)
2018 a1pms_api_get_rics() {
2021 if [ $# -lt 2 ]; then
2022 __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
2026 if [ "$A1PMS_VERSION" == "V2" ]; then
2028 if [ $2 != "NOTYPE" ]; then
2029 query="/v2/rics?policytype_id="$2
2033 if [ $2 != "NOTYPE" ]; then
2034 query="/rics?policyType="$2
2038 res="$(__do_curl_to_api A1PMS GET $query)"
2039 status=${res:${#res}-3}
2041 if [ $status -ne $1 ]; then
2042 __log_test_fail_status_code $1 $status
2046 if [ $# -gt 2 ]; then
2047 body=${res:0:${#res}-3}
2048 if [ "$A1PMS_VERSION" == "V2" ]; then
2049 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" )
2051 res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" )
2053 if [ $res -ne 0 ]; then
2054 __log_test_fail_general "Could not create target ric info json"
2058 targetJson=$(<./tmp/.tmp_rics.json)
2059 if [ "$A1PMS_VERSION" == "V2" ]; then
2060 targetJson="{\"rics\": $targetJson }"
2062 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2063 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2064 if [ $res -ne 0 ]; then
2065 __log_test_fail_body
2070 __collect_endpoint_stats "A1PMS" 12 "GET" $A1PMS_API_PREFIX"/v2/rics" $status
2075 ##################################################################
2076 #### API Test case functions Service registry and supervision ####
2077 ##################################################################
2079 # API test function: PUT /service and V2 PUT /service
2080 # args: <response-code> <service-name> <keepalive-timeout> <callbackurl>
2081 # (Function for test scripts)
2082 a1pms_api_put_service() {
2084 if [ $# -ne 4 ]; then
2085 __print_err "<response-code> <service-name> <keepalive-timeout> <callbackurl>" $@
2089 if [ "$A1PMS_VERSION" == "V2" ]; then
2090 query="/v2/services"
2091 json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}"
2094 json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
2096 file="./tmp/.tmp.json"
2097 echo "$json" > $file
2099 res="$(__do_curl_to_api A1PMS PUT $query $file)"
2100 status=${res:${#res}-3}
2102 if [ $status -ne $1 ]; then
2103 __log_test_fail_status_code $1 $status
2107 __collect_endpoint_stats "A1PMS" 13 "PUT" $A1PMS_API_PREFIX"/v2/service" $status
2112 # API test function: GET /services and V2 GET /v2/services
2113 #args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
2114 # (Function for test scripts)
2115 a1pms_api_get_services() {
2117 #Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
2119 if [ $# -eq 1 ]; then
2121 elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
2123 elif [ $# -eq 5 ]; then
2125 elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
2127 if [ $(($argLen%3)) -eq 0 ]; then
2132 if [ $paramError -ne 0 ]; then
2133 __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
2137 if [ "$A1PMS_VERSION" == "V2" ]; then
2138 query="/v2/services"
2140 if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
2141 query="/v2/services?service_id="$2
2146 if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
2147 query="/services?name="$2
2150 res="$(__do_curl_to_api A1PMS GET $query)"
2151 status=${res:${#res}-3}
2153 if [ $status -ne $1 ]; then
2154 __log_test_fail_status_code $1 $status
2158 if [ $# -gt 2 ]; then
2159 variableArgCount=$(($#-2))
2160 body=${res:0:${#res}-3}
2164 while [ $cntr -lt $variableArgCount ]; do
2165 servicename=$1; shift;
2168 if [ $cntr -gt 0 ]; then
2169 targetJson=$targetJson","
2171 # timeSinceLastActivitySeconds value cannot be checked since value varies
2172 if [ "$A1PMS_VERSION" == "V2" ]; then
2173 targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}"
2175 targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
2179 targetJson=$targetJson"]"
2180 if [ "$A1PMS_VERSION" == "V2" ]; then
2181 targetJson="{\"service_list\": $targetJson }"
2183 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2184 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2185 if [ $res -ne 0 ]; then
2186 __log_test_fail_body
2191 __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
2196 # API test function: GET /services V2 GET /v2/services - (only checking service names)
2197 # args: <response-code> [<service-name>]*"
2198 # (Function for test scripts)
2199 a1pms_api_get_service_ids() {
2202 if [ $# -lt 1 ]; then
2203 __print_err "<response-code> [<service-name>]*" $@
2207 if [ "$A1PMS_VERSION" == "V2" ]; then
2208 query="/v2/services"
2212 res="$(__do_curl_to_api A1PMS GET $query)"
2213 status=${res:${#res}-3}
2215 if [ $status -ne $1 ]; then
2216 __log_test_fail_status_code $1 $status
2220 body=${res:0:${#res}-3}
2222 for rapp in ${@:2} ; do
2223 if [ "$targetJson" != "[" ]; then
2224 targetJson=$targetJson","
2226 if [ "$A1PMS_VERSION" == "V2" ]; then
2227 targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}"
2229 targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
2233 targetJson=$targetJson"]"
2234 if [ "$A1PMS_VERSION" == "V2" ]; then
2235 targetJson="{\"service_list\": $targetJson }"
2237 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2238 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2240 if [ $res -ne 0 ]; then
2241 __log_test_fail_body
2245 __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status
2250 # API test function: DELETE /services and V2 DELETE /v2/services/{serviceId}
2251 # args: <response-code> <service-name>
2252 # (Function for test scripts)
2253 a1pms_api_delete_services() {
2256 if [ $# -ne 2 ]; then
2257 __print_err "<response-code> <service-name>" $@
2260 if [ "$A1PMS_VERSION" == "V2" ]; then
2261 query="/v2/services/"$2
2263 query="/services?name="$2
2265 res="$(__do_curl_to_api A1PMS DELETE $query)"
2266 status=${res:${#res}-3}
2268 if [ $status -ne $1 ]; then
2269 __log_test_fail_status_code $1 $status
2273 __collect_endpoint_stats "A1PMS" 15 "DELETE" $A1PMS_API_PREFIX"/v2/services/{serviceId}" $status
2278 # API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive
2279 # args: <response-code> <service-name>
2280 # (Function for test scripts)
2281 a1pms_api_put_services_keepalive() {
2284 if [ $# -ne 2 ]; then
2285 __print_err "<response-code> <service-name>" $@
2288 if [ "$A1PMS_VERSION" == "V2" ]; then
2289 query="/v2/services/$2/keepalive"
2291 query="/services/keepalive?name="$2
2294 res="$(__do_curl_to_api A1PMS PUT $query)"
2295 status=${res:${#res}-3}
2297 if [ $status -ne $1 ]; then
2298 __log_test_fail_status_code $1 $status
2302 __collect_endpoint_stats "A1PMS" 16 "PUT" $A1PMS_API_PREFIX"/v2/services/{service_id}/keepalive" $status
2307 ##################################################################
2308 #### API Test case functions Configuration ####
2309 ##################################################################
2311 # API Test function: PUT /v2/configuration
2312 # args: <response-code> <config-file>
2313 # (Function for test scripts)
2314 a1pms_api_put_configuration() {
2317 if [ "$A1PMS_VERSION" != "V2" ]; then
2318 __log_test_fail_not_supported
2322 if [ $# -ne 2 ]; then
2323 __print_err "<response-code> <config-file>" $@
2326 if [ ! -f $2 ]; then
2327 __log_test_fail_general "Config file "$2", does not exist"
2331 # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header
2332 # inputJson="{\"config\":"$inputJson"}"
2334 file="./tmp/.config.json"
2335 echo $inputJson > $file
2336 query="/v2/configuration"
2337 res="$(__do_curl_to_api A1PMS PUT $query $file)"
2338 status=${res:${#res}-3}
2340 if [ $status -ne $1 ]; then
2341 __log_test_fail_status_code $1 $status
2345 __collect_endpoint_stats "A1PMS" 17 "PUT" $A1PMS_API_PREFIX"/v2/configuration" $status
2350 # API Test function: GET /v2/configuration
2351 # args: <response-code> [<config-file>]
2352 # (Function for test scripts)
2353 a1pms_api_get_configuration() {
2356 if [ "$A1PMS_VERSION" != "V2" ]; then
2357 __log_test_fail_not_supported
2361 if [ $# -lt 1 ] || [ $# -gt 2 ]; then
2362 __print_err "<response-code> [<config-file>]" $@
2365 if [ ! -f $2 ]; then
2366 __log_test_fail_general "Config file "$2" for comparison, does not exist"
2370 query="/v2/configuration"
2371 res="$(__do_curl_to_api A1PMS GET $query)"
2372 status=${res:${#res}-3}
2374 if [ $status -ne $1 ]; then
2375 __log_test_fail_status_code $1 $status
2379 if [ $# -eq 2 ]; then
2381 body=${res:0:${#res}-3}
2384 # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header
2385 # inputJson="{\"config\":"$inputJson"}"
2387 echo "TARGET JSON: $targetJson" >> $HTTPLOG
2388 res=$(python3 ../common/compare_json.py "$targetJson" "$body")
2390 if [ $res -ne 0 ]; then
2391 __log_test_fail_body
2396 __collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v2/configuration" $status
2401 ##########################################
2402 #### Reset types and instances ####
2403 ##########################################
2405 # Admin reset to remove all policies and services
2406 # All types and instances etc are removed - types and instances in a1 sims need to be removed separately
2407 # NOTE - only works in kubernetes and the pod should not be running
2409 # (Function for test scripts)
2411 a1pms_kube_pvc_reset() {
2414 pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE --no-headers -o custom-columns=":metadata.name" | grep policy)
2415 if [ -z "$pvc_name" ]; then
2416 pvc_name=policymanagementservice-vardata-pvc
2418 echo " Trying to reset pvc: "$pvc_name
2419 __kube_clean_pvc $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $A1PMS_CONTAINER_MNT_DIR
2425 # args: <realm> <client-name> <client-secret>
2426 a1pms_configure_sec() {
2427 export A1PMS_CREDS_GRANT_TYPE="client_credentials"
2428 export A1PMS_CREDS_CLIENT_SECRET=$3
2429 export A1PMS_CREDS_CLIENT_ID=$2
2430 export A1PMS_AUTH_SERVICE_URL=$KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token
2431 export A1PMS_SIDECAR_MOUNT="/token-cache"
2432 export A1PMS_SIDECAR_JWT_FILE=$A1PMS_SIDECAR_MOUNT"/jwt.txt"
2434 export AUTHSIDECAR_APP_NAME
2435 export AUTHSIDECAR_DISPLAY_NAME