test/auto-test/PM_EI_DEMO.sh

   1 #!/usr/bin/env bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and enrichment information"
  21
  22 #App names to include in the test when running docker, space separated list
  23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY NGW"
  24
  25 #App names to include in the test when running kubernetes, space separated list
  26 KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY KUBEPROXY NGW"
  27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
  28 KUBE_PRESTARTED_IMAGES=""
  29
  30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
  31 #the image is not configured in the supplied env_file
  32 #Used for images not applicable to all supported profile
  33 CONDITIONALLY_IGNORED_IMAGES="NGW"
  34
  35 #Supported test environment profiles
  36 SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE"
  37 #Supported run modes
  38 SUPPORTED_RUNMODES="DOCKER KUBE"
  39
  40 . ../common/testcase_common.sh $@
  41 . ../common/agent_api_functions.sh
  42 . ../common/ricsimulator_api_functions.sh
  43 . ../common/ecs_api_functions.sh
  44 . ../common/prodstub_api_functions.sh
  45 . ../common/cr_api_functions.sh
  46 . ../common/rapp_catalogue_api_functions.sh
  47 . ../common/mr_api_functions.sh
  48 . ../common/control_panel_api_functions.sh
  49 . ../common/controller_api_functions.sh
  50 . ../common/consul_cbs_functions.sh
  51 . ../common/http_proxy_api_functions.sh
  52 . ../common/kube_proxy_api_functions.sh
  53 . ../common/gateway_api_functions.sh
  54
  55 setup_testenvironment
  56
  57 #### TEST BEGIN ####
  58
  59 #Local vars in test script
  60 ##########################
  61
  62 use_cr_https
  63 use_agent_rest_https
  64 use_sdnc_https
  65 use_simulator_https
  66 use_ecs_rest_https
  67 use_prod_stub_https
  68 if [ $ECS_VERSION == "V1-1" ]; then
  69     use_rapp_catalogue_http # https not yet supported
  70 else
  71     use_rapp_catalogue_https
  72 fi
  73
  74
  75 if [ "$PMS_VERSION" == "V2" ]; then
  76     notificationurl=$CR_SERVICE_PATH"/test"
  77 else
  78    echo "PMS VERSION 2 (V2) is required"
  79    exit 1
  80 fi
  81
  82 clean_environment
  83
  84 if [ $RUNMODE == "KUBE" ]; then
  85     start_kube_proxy
  86 fi
  87
  88 STD_NUM_RICS=2
  89
  90 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
  91
  92 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
  93
  94 start_mr #Just to prevent errors in the agent log...
  95
  96 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
  97
  98 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
  99     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
 100 fi
 101
 102 start_sdnc    # Comment this line to run PMS with proxy
 103
 104 start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
 105
 106 if [ $RUNMODE == "DOCKER" ]; then
 107     start_consul_cbs
 108 fi
 109
 110 prepare_consul_config      SDNC  ".consul_config.json"   #Change to NOSDNC if running PMS with  proxy
 111
 112 if [ $RUNMODE == "KUBE" ]; then
 113     agent_load_config                       ".consul_config.json"
 114 else
 115     consul_config_app                      ".consul_config.json"
 116 fi
 117
 118 start_cr
 119
 120 start_prod_stub
 121
 122 start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_CONFIG_FILE
 123
 124 start_rapp_catalogue
 125
 126 set_agent_trace
 127
 128 set_ecs_trace
 129
 130 rapp_cat_api_get_services 200 EMPTY
 131
 132 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 133
 134 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 135
 136 api_get_status 200
 137
 138 # Print the A1 version for STD 2.X
 139 for ((i=1; i<=$STD_NUM_RICS; i++))
 140 do
 141     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
 142 done
 143 # Load the polictypes in std
 144 for ((i=1; i<=$STD_NUM_RICS; i++))
 145 do
 146     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
 147     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
 148 done
 149
 150 #Check the number of schemas and the individual schemas in STD
 151 api_equal json:policy-types 2 120
 152
 153 for ((i=1; i<=$STD_NUM_RICS; i++))
 154 do
 155     api_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
 156 done
 157
 158 # Check the schemas in STD
 159 for ((i=1; i<=$STD_NUM_RICS; i++))
 160 do
 161     api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-agent-modified.json
 162     api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-agent-modified.json
 163 done
 164
 165 #Check the number of types
 166 api_equal json:policy-types 2 300
 167
 168 api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_PATH/1"
 169
 170 # Create policies in STD
 171 for ((i=1; i<=$STD_NUM_RICS; i++))
 172 do
 173     generate_policy_uuid
 174     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 175     generate_policy_uuid
 176     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 177 done
 178
 179
 180 # Check the number of policies in STD
 181 for ((i=1; i<=$STD_NUM_RICS; i++))
 182 do
 183     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
 184 done
 185
 186 # Print calling hosts STD 2.X
 187 for ((i=1; i<=$STD_NUM_RICS; i++))
 188 do
 189     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
 190 done
 191
 192 FLAT_A1_EI="1"
 193
 194 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
 195 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
 196 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
 197 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
 198 if [ $RUNMODE == "KUBE" ]; then
 199     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
 200     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
 201 fi
 202 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 203 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 204
 205 STATUS1="$CR_SERVICE_PATH/callbacks/job1-status"
 206 STATUS2="$CR_SERVICE_PATH/callbacks/job2-status"
 207
 208 prodstub_arm_producer 200 prod-a
 209 prodstub_arm_type 200 prod-a type1
 210 prodstub_arm_job_create 200 prod-a job1
 211 prodstub_arm_job_create 200 prod-a job2
 212
 213 ### ecs status
 214 ecs_api_service_status 200
 215
 216 ## Setup prod-a
 217 if [ $ECS_VERSION == "V1-1" ]; then
 218     ecs_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
 219
 220     ecs_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
 221 else
 222     ecs_api_edp_put_type_2 201 type1 testdata/ecs/ei-type-1.json
 223
 224     ecs_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 225
 226     ecs_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 227 fi
 228
 229 ecs_api_edp_get_producer_status 200 prod-a ENABLED
 230
 231
 232 ## Create a job for prod-a
 233 ## job1 - prod-a
 234 if [  -z "$FLAT_A1_EI" ]; then
 235     ecs_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 236 else
 237     ecs_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ecs/job-template.json
 238 fi
 239
 240 # Check the job data in the producer
 241 if [ $ECS_VERSION == "V1-1" ]; then
 242     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 243 else
 244     prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 245 fi
 246
 247
 248 ## Create a second job for prod-a
 249 ## job2 - prod-a
 250 if [  -z "$FLAT_A1_EI" ]; then
 251     ecs_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 252 else
 253     ecs_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ecs/job-template.json
 254 fi
 255
 256 # Check the job data in the producer
 257 if [ $ECS_VERSION == "V1-1" ]; then
 258     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 259 else
 260     prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 261 fi
 262
 263 check_policy_agent_logs
 264 check_ecs_logs
 265 check_sdnc_logs
 266
 267 #### TEST COMPLETE ####
 268
 269 store_logs          END
 270
 271 print_result
 272
 273 auto_clean_environment