Adaptation of test env to helm chart
[nonrtric.git] / test / auto-test / PM_EI_DEMO.sh
1 #!/usr/bin/env bash
2
3 #  ============LICENSE_START===============================================
4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 #  ========================================================================
6 #  Licensed under the Apache License, Version 2.0 (the "License");
7 #  you may not use this file except in compliance with the License.
8 #  You may obtain a copy of the License at
9 #
10 #       http://www.apache.org/licenses/LICENSE-2.0
11 #
12 #  Unless required by applicable law or agreed to in writing, software
13 #  distributed under the License is distributed on an "AS IS" BASIS,
14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 #  See the License for the specific language governing permissions and
16 #  limitations under the License.
17 #  ============LICENSE_END=================================================
18 #
19
20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and enrichment information"
21
22 #App names to include in the test when running docker, space separated list
23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
24
25 #App names to include in the test when running kubernetes, space separated list
26 KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY KUBEPROXY NGW"
27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
28 KUBE_PRESTARTED_IMAGES=""
29
30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
31 #the image is not configured in the supplied env_file
32 #Used for images not applicable to all supported profile
33 CONDITIONALLY_IGNORED_IMAGES="NGW"
34
35 #Supported test environment profiles
36 SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE"
37 #Supported run modes
38 SUPPORTED_RUNMODES="DOCKER KUBE"
39
40 . ../common/testcase_common.sh $@
41 . ../common/agent_api_functions.sh
42 . ../common/ricsimulator_api_functions.sh
43 . ../common/ecs_api_functions.sh
44 . ../common/prodstub_api_functions.sh
45 . ../common/cr_api_functions.sh
46 . ../common/rapp_catalogue_api_functions.sh
47 . ../common/mr_api_functions.sh
48 . ../common/control_panel_api_functions.sh
49 . ../common/controller_api_functions.sh
50 . ../common/consul_cbs_functions.sh
51 . ../common/http_proxy_api_functions.sh
52 . ../common/kube_proxy_api_functions.sh
53 . ../common/gateway_api_functions.sh
54
55 setup_testenvironment
56
57 #### TEST BEGIN ####
58
59 #Local vars in test script
60 ##########################
61
62 use_cr_https
63 use_agent_rest_https
64 use_sdnc_https
65 use_simulator_https
66 use_ecs_rest_https
67 use_prod_stub_https
68 if [ $ECS_VERSION == "V1-1" ]; then
69     use_rapp_catalogue_http # https not yet supported
70 else
71     use_rapp_catalogue_https
72 fi
73
74
75 if [ "$PMS_VERSION" == "V2" ]; then
76     notificationurl=$CR_SERVICE_APP_PATH"/test"
77 else
78    echo "PMS VERSION 2 (V2) is required"
79    exit 1
80 fi
81
82 clean_environment
83
84 start_kube_proxy
85
86 STD_NUM_RICS=2
87
88 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
89
90 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
91
92 start_mr #Just to prevent errors in the agent log...
93
94 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
95
96 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
97     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
98 fi
99
100 start_sdnc    # Comment this line to run PMS with proxy
101
102 start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
103
104 if [ $RUNMODE == "DOCKER" ]; then
105     start_consul_cbs
106 fi
107
108 prepare_consul_config      SDNC  ".consul_config.json"   #Change to NOSDNC if running PMS with  proxy
109
110 if [ $RUNMODE == "KUBE" ]; then
111     agent_load_config                       ".consul_config.json"
112 else
113     consul_config_app                      ".consul_config.json"
114 fi
115
116 start_cr
117
118 start_prod_stub
119
120 start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_CONFIG_FILE
121
122 start_rapp_catalogue
123
124 set_agent_trace
125
126 set_ecs_trace
127
128 use_info_jobs=false  #Set flag if interface supporting info-types is used
129 if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
130     use_info_jobs=true
131 fi
132
133 rapp_cat_api_get_services 200 EMPTY
134
135 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
136
137 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
138
139 api_get_status 200
140
141 # Print the A1 version for STD 2.X
142 for ((i=1; i<=$STD_NUM_RICS; i++))
143 do
144     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
145 done
146 # Load the polictypes in std
147 for ((i=1; i<=$STD_NUM_RICS; i++))
148 do
149     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
150     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
151 done
152
153 #Check the number of schemas and the individual schemas in STD
154 api_equal json:policy-types 2 120
155
156 for ((i=1; i<=$STD_NUM_RICS; i++))
157 do
158     api_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
159 done
160
161 # Check the schemas in STD
162 for ((i=1; i<=$STD_NUM_RICS; i++))
163 do
164     api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-agent-modified.json
165     api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-agent-modified.json
166 done
167
168 #Check the number of types
169 api_equal json:policy-types 2 300
170
171 api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH/1"
172
173 # Create policies in STD
174 for ((i=1; i<=$STD_NUM_RICS; i++))
175 do
176     generate_policy_uuid
177     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
178     generate_policy_uuid
179     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
180 done
181
182
183 # Check the number of policies in STD
184 for ((i=1; i<=$STD_NUM_RICS; i++))
185 do
186     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
187 done
188
189 # Print calling hosts STD 2.X
190 for ((i=1; i<=$STD_NUM_RICS; i++))
191 do
192     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
193 done
194
195 FLAT_A1_EI="1"
196
197 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
198 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
199 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
200 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
201 if [ $RUNMODE == "KUBE" ]; then
202     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
203     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
204 fi
205 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
206 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
207
208 STATUS1="$CR_SERVICE_APP_PATH/callbacks/job1-status"
209 STATUS2="$CR_SERVICE_APP_PATH/callbacks/job2-status"
210
211 prodstub_arm_producer 200 prod-a
212 prodstub_arm_type 200 prod-a type1
213 prodstub_arm_job_create 200 prod-a job1
214 prodstub_arm_job_create 200 prod-a job2
215
216 ### ecs status
217 ecs_api_service_status 200
218
219 ## Setup prod-a
220 if [ $ECS_VERSION == "V1-1" ]; then
221     ecs_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
222
223     ecs_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
224 else
225     ecs_api_edp_put_type_2 201 type1 testdata/ecs/ei-type-1.json
226
227     ecs_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
228
229     ecs_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
230 fi
231
232 ecs_api_edp_get_producer_status 200 prod-a ENABLED
233
234
235 ## Create a job for prod-a
236 ## job1 - prod-a
237 if [  -z "$FLAT_A1_EI" ]; then
238     ecs_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
239 else
240     ecs_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ecs/job-template.json
241 fi
242
243 # Check the job data in the producer
244 if [ $ECS_VERSION == "V1-1" ]; then
245     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
246 else
247     if [ $use_info_jobs ]; then
248         prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
249     else
250         prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
251     fi
252 fi
253
254
255 ## Create a second job for prod-a
256 ## job2 - prod-a
257 if [  -z "$FLAT_A1_EI" ]; then
258     ecs_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
259 else
260     ecs_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ecs/job-template.json
261 fi
262
263 # Check the job data in the producer
264 if [ $ECS_VERSION == "V1-1" ]; then
265     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
266 else
267     if [ $use_info_jobs ]; then
268         prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
269     else
270         prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
271     fi
272 fi
273
274 check_policy_agent_logs
275 check_ecs_logs
276 check_sdnc_logs
277
278 #### TEST COMPLETE ####
279
280 store_logs          END
281
282 print_result
283
284 auto_clean_environment