test/auto-test/PM_EI_DEMO.sh

   1 #!/usr/bin/env bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and enrichment information"
  21
  22 #App names to include in the test when running docker, space separated list
  23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY NGW"
  24
  25 #App names to include in the test when running kubernetes, space separated list
  26 KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY KUBEPROXY NGW"
  27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
  28 KUBE_PRESTARTED_IMAGES=""
  29
  30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
  31 #the image is not configured in the supplied env_file
  32 #Used for images not applicable to all supported profile
  33 CONDITIONALLY_IGNORED_IMAGES="NGW"
  34
  35 #Supported test environment profiles
  36 SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE"
  37 #Supported run modes
  38 SUPPORTED_RUNMODES="DOCKER KUBE"
  39
  40 . ../common/testcase_common.sh $@
  41 . ../common/agent_api_functions.sh
  42 . ../common/ricsimulator_api_functions.sh
  43 . ../common/ecs_api_functions.sh
  44 . ../common/prodstub_api_functions.sh
  45 . ../common/cr_api_functions.sh
  46 . ../common/rapp_catalogue_api_functions.sh
  47 . ../common/mr_api_functions.sh
  48 . ../common/control_panel_api_functions.sh
  49 . ../common/controller_api_functions.sh
  50 . ../common/consul_cbs_functions.sh
  51 . ../common/http_proxy_api_functions.sh
  52 . ../common/kube_proxy_api_functions.sh
  53 . ../common/gateway_api_functions.sh
  54
  55 setup_testenvironment
  56
  57 #### TEST BEGIN ####
  58
  59 #Local vars in test script
  60 ##########################
  61
  62 use_cr_https
  63 use_agent_rest_https
  64 use_sdnc_https
  65 use_simulator_https
  66 use_ecs_rest_https
  67 use_prod_stub_https
  68 if [ $ECS_VERSION == "V1-1" ]; then
  69     use_rapp_catalogue_http # https not yet supported
  70 else
  71     use_rapp_catalogue_https
  72 fi
  73
  74
  75 if [ "$PMS_VERSION" == "V2" ]; then
  76     notificationurl=$CR_SERVICE_PATH"/test"
  77 else
  78    echo "PMS VERSION 2 (V2) is required"
  79    exit 1
  80 fi
  81
  82 clean_environment
  83
  84 if [ $RUNMODE == "KUBE" ]; then
  85     start_kube_proxy
  86 fi
  87
  88 STD_NUM_RICS=2
  89
  90 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
  91
  92 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
  93
  94 start_mr #Just to prevent errors in the agent log...
  95
  96 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
  97
  98 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
  99     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
 100 fi
 101
 102 start_sdnc    # Comment this line to run PMS with proxy
 103
 104 start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
 105
 106 if [ $RUNMODE == "DOCKER" ]; then
 107     start_consul_cbs
 108 fi
 109
 110 prepare_consul_config      SDNC  ".consul_config.json"   #Change to NOSDNC if running PMS with  proxy
 111
 112 if [ $RUNMODE == "KUBE" ]; then
 113     agent_load_config                       ".consul_config.json"
 114 else
 115     consul_config_app                      ".consul_config.json"
 116 fi
 117
 118 start_cr
 119
 120 start_prod_stub
 121
 122 start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_CONFIG_FILE
 123
 124 start_rapp_catalogue
 125
 126 set_agent_trace
 127
 128 set_ecs_trace
 129
 130 use_info_jobs=false  #Set flag if interface supporting info-types is used
 131 if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
 132     use_info_jobs=true
 133 fi
 134
 135 rapp_cat_api_get_services 200 EMPTY
 136
 137 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 138
 139 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 140
 141 api_get_status 200
 142
 143 # Print the A1 version for STD 2.X
 144 for ((i=1; i<=$STD_NUM_RICS; i++))
 145 do
 146     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
 147 done
 148 # Load the polictypes in std
 149 for ((i=1; i<=$STD_NUM_RICS; i++))
 150 do
 151     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
 152     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
 153 done
 154
 155 #Check the number of schemas and the individual schemas in STD
 156 api_equal json:policy-types 2 120
 157
 158 for ((i=1; i<=$STD_NUM_RICS; i++))
 159 do
 160     api_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
 161 done
 162
 163 # Check the schemas in STD
 164 for ((i=1; i<=$STD_NUM_RICS; i++))
 165 do
 166     api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-agent-modified.json
 167     api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-agent-modified.json
 168 done
 169
 170 #Check the number of types
 171 api_equal json:policy-types 2 300
 172
 173 api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_PATH/1"
 174
 175 # Create policies in STD
 176 for ((i=1; i<=$STD_NUM_RICS; i++))
 177 do
 178     generate_policy_uuid
 179     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 180     generate_policy_uuid
 181     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 182 done
 183
 184
 185 # Check the number of policies in STD
 186 for ((i=1; i<=$STD_NUM_RICS; i++))
 187 do
 188     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
 189 done
 190
 191 # Print calling hosts STD 2.X
 192 for ((i=1; i<=$STD_NUM_RICS; i++))
 193 do
 194     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
 195 done
 196
 197 FLAT_A1_EI="1"
 198
 199 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
 200 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
 201 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
 202 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
 203 if [ $RUNMODE == "KUBE" ]; then
 204     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
 205     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
 206 fi
 207 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 208 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 209
 210 STATUS1="$CR_SERVICE_PATH/callbacks/job1-status"
 211 STATUS2="$CR_SERVICE_PATH/callbacks/job2-status"
 212
 213 prodstub_arm_producer 200 prod-a
 214 prodstub_arm_type 200 prod-a type1
 215 prodstub_arm_job_create 200 prod-a job1
 216 prodstub_arm_job_create 200 prod-a job2
 217
 218 ### ecs status
 219 ecs_api_service_status 200
 220
 221 ## Setup prod-a
 222 if [ $ECS_VERSION == "V1-1" ]; then
 223     ecs_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
 224
 225     ecs_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ecs/ei-type-1.json
 226 else
 227     ecs_api_edp_put_type_2 201 type1 testdata/ecs/ei-type-1.json
 228
 229     ecs_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 230
 231     ecs_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 232 fi
 233
 234 ecs_api_edp_get_producer_status 200 prod-a ENABLED
 235
 236
 237 ## Create a job for prod-a
 238 ## job1 - prod-a
 239 if [  -z "$FLAT_A1_EI" ]; then
 240     ecs_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 241 else
 242     ecs_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ecs/job-template.json
 243 fi
 244
 245 # Check the job data in the producer
 246 if [ $ECS_VERSION == "V1-1" ]; then
 247     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 248 else
 249     if [ $use_info_jobs ]; then
 250         prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 251     else
 252         prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 253     fi
 254 fi
 255
 256
 257 ## Create a second job for prod-a
 258 ## job2 - prod-a
 259 if [  -z "$FLAT_A1_EI" ]; then
 260     ecs_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 261 else
 262     ecs_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ecs/job-template.json
 263 fi
 264
 265 # Check the job data in the producer
 266 if [ $ECS_VERSION == "V1-1" ]; then
 267     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 268 else
 269     if [ $use_info_jobs ]; then
 270         prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 271     else
 272         prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 273     fi
 274 fi
 275
 276 check_policy_agent_logs
 277 check_ecs_logs
 278 check_sdnc_logs
 279
 280 #### TEST COMPLETE ####
 281
 282 store_logs          END
 283
 284 print_result
 285
 286 auto_clean_environment