test/auto-test/PM_EI_DEMO.sh

   1 #!/usr/bin/env bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and information information"
  21
  22 #App names to include in the test when running docker, space separated list
  23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR A1PMS RICSIM SDNC ICS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
  24
  25 #App names to include in the test when running kubernetes, space separated list
  26 KUBE_INCLUDED_IMAGES=" MR CR A1PMS RC PRODSTUB RICSIM CP ICS SDNC HTTPPROXY KUBEPROXY NGW"
  27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
  28 KUBE_PRESTARTED_IMAGES=""
  29
  30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
  31 #the image is not configured in the supplied env_file
  32 #Used for images not applicable to all supported profile
  33 CONDITIONALLY_IGNORED_IMAGES="CBS CONSUL NGW"
  34
  35 #Supported test environment profiles
  36 SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ONAP-JAKARTA ONAP-KOHN ONAP-LONDON  ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE ORAN-F-RELEASE ORAN-G-RELEASE"
  37 #Supported run modes
  38 SUPPORTED_RUNMODES="DOCKER KUBE"
  39
  40 . ../common/testcase_common.sh $@
  41
  42 setup_testenvironment
  43
  44 #### TEST BEGIN ####
  45
  46 #Local vars in test script
  47 ##########################
  48
  49 use_cr_https
  50 use_a1pms_rest_https
  51 use_sdnc_https
  52 use_simulator_https
  53 use_ics_rest_https
  54 use_prod_stub_https
  55 if [ $ICS_VERSION == "V1-1" ]; then
  56     use_rapp_catalogue_http # https not yet supported
  57 else
  58     use_rapp_catalogue_https
  59 fi
  60
  61
  62 if [ "$A1PMS_VERSION" == "V2" ]; then
  63     notificationurl=$CR_SERVICE_APP_PATH_0"/test"
  64 else
  65    echo "A1PMS VERSION 2 (V2) is required"
  66    exit 1
  67 fi
  68
  69 clean_environment
  70
  71 start_kube_proxy
  72
  73 STD_NUM_RICS=2
  74
  75 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
  76
  77 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
  78
  79 start_mr #Just to prevent errors in the a1pms log...
  80
  81 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
  82
  83 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
  84     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
  85 fi
  86
  87 start_sdnc    # Comment this line to run A1PMS with proxy
  88
  89 start_a1pms PROXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
  90
  91 __CONFIG_HEADER="NOHEADER"
  92 if [ $RUNMODE == "KUBE" ]; then
  93     __CONFIG_HEADER="HEADER"
  94 else
  95     if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
  96     __CONFIG_HEADER="HEADER"
  97     fi
  98 fi
  99
 100 prepare_consul_config      SDNC  ".consul_config.json" $__CONFIG_HEADER  #Change to NOSDNC if running A1PMS with  proxy
 101
 102 if [ $RUNMODE == "KUBE" ]; then
 103     a1pms_load_config                       ".consul_config.json"
 104 else
 105     if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
 106         a1pms_api_put_configuration 200 ".consul_config.json"
 107     else
 108         start_consul_cbs
 109         consul_config_app                   ".consul_config.json"
 110     fi
 111 fi
 112
 113 start_cr 1
 114
 115 start_prod_stub
 116
 117 start_ics PROXY $SIM_GROUP/$ICS_COMPOSE_DIR/$ICS_CONFIG_FILE
 118
 119 start_rapp_catalogue
 120
 121 set_a1pms_trace
 122
 123 set_ics_trace
 124
 125 use_info_jobs=false  #Set flag if interface supporting info-types is used
 126 if [[ "$ICS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
 127     use_info_jobs=true
 128 fi
 129
 130 rapp_cat_api_get_services 200 EMPTY
 131
 132 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 133
 134 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 135
 136 sleep_wait 120 "Let A1PMS cofiguration take effect"
 137
 138 a1pms_api_get_status 200
 139
 140 # Print the A1 version for STD 2.X
 141 for ((i=1; i<=$STD_NUM_RICS; i++))
 142 do
 143     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
 144 done
 145 # Load the polictypes in std
 146 for ((i=1; i<=$STD_NUM_RICS; i++))
 147 do
 148     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
 149     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
 150 done
 151
 152 #Check the number of schemas and the individual schemas in STD
 153 a1pms_equal json:policy-types 2 120
 154
 155 for ((i=1; i<=$STD_NUM_RICS; i++))
 156 do
 157     a1pms_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
 158 done
 159
 160 # Check the schemas in STD
 161 for ((i=1; i<=$STD_NUM_RICS; i++))
 162 do
 163     a1pms_api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-a1pms-modified.json
 164     a1pms_api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-a1pms-modified.json
 165 done
 166
 167 #Check the number of types
 168 a1pms_equal json:policy-types 2 300
 169
 170 a1pms_api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH_0/1"
 171
 172 # Create policies in STD
 173 for ((i=1; i<=$STD_NUM_RICS; i++))
 174 do
 175     generate_policy_uuid
 176     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 177     generate_policy_uuid
 178     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 179 done
 180
 181
 182 # Check the number of policies in STD
 183 for ((i=1; i<=$STD_NUM_RICS; i++))
 184 do
 185     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
 186 done
 187
 188 # Print calling hosts STD 2.X
 189 for ((i=1; i<=$STD_NUM_RICS; i++))
 190 do
 191     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
 192 done
 193
 194 FLAT_A1_EI="1"
 195
 196 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
 197 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
 198 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
 199 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
 200 if [ $RUNMODE == "KUBE" ]; then
 201     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
 202     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
 203 fi
 204 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 205 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 206
 207 STATUS1="$CR_SERVICE_APP_PATH_0/callbacks/job1-status"
 208 STATUS2="$CR_SERVICE_APP_PATH_0/callbacks/job2-status"
 209
 210 prodstub_arm_producer 200 prod-a
 211 prodstub_arm_type 200 prod-a type1
 212 prodstub_arm_job_create 200 prod-a job1
 213 prodstub_arm_job_create 200 prod-a job2
 214
 215 ### ics status
 216 ics_api_service_status 200
 217
 218 ## Setup prod-a
 219 if [ $ICS_VERSION == "V1-1" ]; then
 220     ics_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 221
 222     ics_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 223 else
 224     ics_api_edp_put_type_2 201 type1 testdata/ics/ei-type-1.json
 225
 226     ics_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 227
 228     ics_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 229 fi
 230
 231 ics_api_edp_get_producer_status 200 prod-a ENABLED
 232
 233
 234 ## Create a job for prod-a
 235 ## job1 - prod-a
 236 if [  -z "$FLAT_A1_EI" ]; then
 237     ics_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 238 else
 239     ics_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ics/job-template.json
 240 fi
 241
 242 # Check the job data in the producer
 243 if [ $ICS_VERSION == "V1-1" ]; then
 244     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 245 else
 246     if [ $use_info_jobs ]; then
 247         prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 248     else
 249         prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 250     fi
 251 fi
 252
 253
 254 ## Create a second job for prod-a
 255 ## job2 - prod-a
 256 if [  -z "$FLAT_A1_EI" ]; then
 257     ics_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 258 else
 259     ics_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ics/job-template.json
 260 fi
 261
 262 # Check the job data in the producer
 263 if [ $ICS_VERSION == "V1-1" ]; then
 264     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 265 else
 266     if [ $use_info_jobs ]; then
 267         prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 268     else
 269         prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 270     fi
 271 fi
 272
 273 check_a1pms_logs
 274 check_ics_logs
 275 check_sdnc_logs
 276
 277 #### TEST COMPLETE ####
 278
 279 store_logs          END
 280
 281 print_result
 282
 283 auto_clean_environment