test/auto-test/PM_EI_DEMO.sh

   1 #!/usr/bin/env bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and information information"
  21
  22 #App names to include in the test when running docker, space separated list
  23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR A1PMS RICSIM SDNC ICS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
  24
  25 #App names to include in the test when running kubernetes, space separated list
  26 KUBE_INCLUDED_IMAGES=" MR CR A1PMS RC PRODSTUB RICSIM CP ICS SDNC HTTPPROXY KUBEPROXY NGW"
  27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
  28 KUBE_PRESTARTED_IMAGES=""
  29
  30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
  31 #the image is not configured in the supplied env_file
  32 #Used for images not applicable to all supported profile
  33 CONDITIONALLY_IGNORED_IMAGES="CBS CONSUL NGW"
  34
  35 #Supported test environment profiles
  36 SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ONAP-JAKARTA ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE ORAN-F-RELEASE"
  37 #Supported run modes
  38 SUPPORTED_RUNMODES="DOCKER KUBE"
  39
  40 . ../common/testcase_common.sh $@
  41
  42 setup_testenvironment
  43
  44 #### TEST BEGIN ####
  45
  46 #Local vars in test script
  47 ##########################
  48
  49 use_cr_https
  50 use_a1pms_rest_https
  51 use_sdnc_https
  52 use_simulator_https
  53 use_ics_rest_https
  54 use_prod_stub_https
  55 if [ $ICS_VERSION == "V1-1" ]; then
  56     use_rapp_catalogue_http # https not yet supported
  57 else
  58     use_rapp_catalogue_https
  59 fi
  60
  61
  62 if [ "$A1PMS_VERSION" == "V2" ]; then
  63     notificationurl=$CR_SERVICE_APP_PATH_0"/test"
  64 else
  65    echo "A1PMS VERSION 2 (V2) is required"
  66    exit 1
  67 fi
  68
  69 clean_environment
  70
  71 start_kube_proxy
  72
  73 STD_NUM_RICS=2
  74
  75 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
  76
  77 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
  78
  79 start_mr #Just to prevent errors in the a1pms log...
  80
  81 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
  82
  83 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
  84     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
  85 fi
  86
  87 start_sdnc    # Comment this line to run A1PMS with proxy
  88
  89 start_a1pms PROXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
  90
  91 prepare_consul_config      SDNC  ".consul_config.json"   #Change to NOSDNC if running A1PMS with  proxy
  92
  93 if [ $RUNMODE == "KUBE" ]; then
  94     a1pms_load_config                       ".consul_config.json"
  95 else
  96     if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
  97         a1pms_api_put_configuration 200 ".consul_config.json"
  98     else
  99         start_consul_cbs
 100         consul_config_app                   ".consul_config.json"
 101     fi
 102 fi
 103
 104 start_cr 1
 105
 106 start_prod_stub
 107
 108 start_ics PROXY $SIM_GROUP/$ICS_COMPOSE_DIR/$ICS_CONFIG_FILE
 109
 110 start_rapp_catalogue
 111
 112 set_a1pms_trace
 113
 114 set_ics_trace
 115
 116 use_info_jobs=false  #Set flag if interface supporting info-types is used
 117 if [[ "$ICS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
 118     use_info_jobs=true
 119 fi
 120
 121 rapp_cat_api_get_services 200 EMPTY
 122
 123 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 124
 125 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 126
 127 a1pms_api_get_status 200
 128
 129 # Print the A1 version for STD 2.X
 130 for ((i=1; i<=$STD_NUM_RICS; i++))
 131 do
 132     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
 133 done
 134 # Load the polictypes in std
 135 for ((i=1; i<=$STD_NUM_RICS; i++))
 136 do
 137     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
 138     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
 139 done
 140
 141 #Check the number of schemas and the individual schemas in STD
 142 a1pms_equal json:policy-types 2 120
 143
 144 for ((i=1; i<=$STD_NUM_RICS; i++))
 145 do
 146     a1pms_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
 147 done
 148
 149 # Check the schemas in STD
 150 for ((i=1; i<=$STD_NUM_RICS; i++))
 151 do
 152     a1pms_api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-a1pms-modified.json
 153     a1pms_api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-a1pms-modified.json
 154 done
 155
 156 #Check the number of types
 157 a1pms_equal json:policy-types 2 300
 158
 159 a1pms_api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH_0/1"
 160
 161 # Create policies in STD
 162 for ((i=1; i<=$STD_NUM_RICS; i++))
 163 do
 164     generate_policy_uuid
 165     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 166     generate_policy_uuid
 167     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 168 done
 169
 170
 171 # Check the number of policies in STD
 172 for ((i=1; i<=$STD_NUM_RICS; i++))
 173 do
 174     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
 175 done
 176
 177 # Print calling hosts STD 2.X
 178 for ((i=1; i<=$STD_NUM_RICS; i++))
 179 do
 180     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
 181 done
 182
 183 FLAT_A1_EI="1"
 184
 185 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
 186 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
 187 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
 188 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
 189 if [ $RUNMODE == "KUBE" ]; then
 190     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
 191     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
 192 fi
 193 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 194 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 195
 196 STATUS1="$CR_SERVICE_APP_PATH_0/callbacks/job1-status"
 197 STATUS2="$CR_SERVICE_APP_PATH_0/callbacks/job2-status"
 198
 199 prodstub_arm_producer 200 prod-a
 200 prodstub_arm_type 200 prod-a type1
 201 prodstub_arm_job_create 200 prod-a job1
 202 prodstub_arm_job_create 200 prod-a job2
 203
 204 ### ics status
 205 ics_api_service_status 200
 206
 207 ## Setup prod-a
 208 if [ $ICS_VERSION == "V1-1" ]; then
 209     ics_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 210
 211     ics_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 212 else
 213     ics_api_edp_put_type_2 201 type1 testdata/ics/ei-type-1.json
 214
 215     ics_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 216
 217     ics_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 218 fi
 219
 220 ics_api_edp_get_producer_status 200 prod-a ENABLED
 221
 222
 223 ## Create a job for prod-a
 224 ## job1 - prod-a
 225 if [  -z "$FLAT_A1_EI" ]; then
 226     ics_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 227 else
 228     ics_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ics/job-template.json
 229 fi
 230
 231 # Check the job data in the producer
 232 if [ $ICS_VERSION == "V1-1" ]; then
 233     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 234 else
 235     if [ $use_info_jobs ]; then
 236         prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 237     else
 238         prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 239     fi
 240 fi
 241
 242
 243 ## Create a second job for prod-a
 244 ## job2 - prod-a
 245 if [  -z "$FLAT_A1_EI" ]; then
 246     ics_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 247 else
 248     ics_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ics/job-template.json
 249 fi
 250
 251 # Check the job data in the producer
 252 if [ $ICS_VERSION == "V1-1" ]; then
 253     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 254 else
 255     if [ $use_info_jobs ]; then
 256         prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 257     else
 258         prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 259     fi
 260 fi
 261
 262 check_a1pms_logs
 263 check_ics_logs
 264 check_sdnc_logs
 265
 266 #### TEST COMPLETE ####
 267
 268 store_logs          END
 269
 270 print_result
 271
 272 auto_clean_environment