test/auto-test/PM_EI_DEMO.sh

   1 #!/usr/bin/env bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 TC_ONELINE_DESCR="Preparation demo setup  - policy management and information information"
  21
  22 #App names to include in the test when running docker, space separated list
  23 DOCKER_INCLUDED_IMAGES="CP CR MR A1PMS RICSIM SDNC ICS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
  24
  25 #App names to include in the test when running kubernetes, space separated list
  26 KUBE_INCLUDED_IMAGES=" MR CR A1PMS RC PRODSTUB RICSIM CP ICS SDNC HTTPPROXY KUBEPROXY NGW"
  27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
  28 KUBE_PRESTARTED_IMAGES=""
  29
  30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
  31 #the image is not configured in the supplied env_file
  32 #Used for images not applicable to all supported profile
  33 CONDITIONALLY_IGNORED_IMAGES="NGW"
  34
  35 #Supported test environment profiles
  36 SUPPORTED_PROFILES="ONAP-JAKARTA ONAP-KOHN ONAP-LONDON  ORAN-F-RELEASE ORAN-G-RELEASE ORAN-H-RELEASE"
  37 #Supported run modes
  38 SUPPORTED_RUNMODES="DOCKER KUBE"
  39
  40 . ../common/testcase_common.sh $@
  41
  42 setup_testenvironment
  43
  44 #### TEST BEGIN ####
  45
  46 #Local vars in test script
  47 ##########################
  48
  49 use_cr_https
  50 use_a1pms_rest_https
  51 use_sdnc_https
  52 use_simulator_https
  53 use_ics_rest_https
  54 use_prod_stub_https
  55 if [ $ICS_VERSION == "V1-1" ]; then
  56     use_rapp_catalogue_http # https not yet supported
  57 else
  58     use_rapp_catalogue_https
  59 fi
  60
  61
  62 notificationurl=$CR_SERVICE_APP_PATH_0"/test"
  63
  64 clean_environment
  65
  66 start_kube_proxy
  67
  68 STD_NUM_RICS=2
  69
  70 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
  71
  72 start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
  73
  74 start_mr #Just to prevent errors in the a1pms log...
  75
  76 start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
  77
  78 if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
  79     start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
  80 fi
  81
  82 start_sdnc    # Comment this line to run A1PMS with proxy
  83
  84 start_a1pms PROXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
  85
  86
  87
  88 prepare_a1pms_config      SDNC  ".a1pms_config.json"  #Change to NOSDNC if running A1PMS with  proxy
  89
  90 if [ $RUNMODE == "KUBE" ]; then
  91     a1pms_load_config                       ".a1pms_config.json"
  92 else
  93     a1pms_api_put_configuration 200 ".a1pms_config.json"
  94 fi
  95
  96 start_cr 1
  97
  98 start_prod_stub
  99
 100 start_ics PROXY $SIM_GROUP/$ICS_COMPOSE_DIR/$ICS_CONFIG_FILE
 101
 102 start_rapp_catalogue
 103
 104 set_a1pms_trace
 105
 106 set_ics_trace
 107
 108 use_info_jobs=false  #Set flag if interface supporting info-types is used
 109 if [[ "$ICS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
 110     use_info_jobs=true
 111 fi
 112
 113 rapp_cat_api_get_services 200 EMPTY
 114
 115 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 116
 117 rapp_cat_api_get_services 200 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
 118
 119 sleep_wait 120 "Let A1PMS cofiguration take effect"
 120
 121 a1pms_api_get_status 200
 122
 123 # Print the A1 version for STD 2.X
 124 for ((i=1; i<=$STD_NUM_RICS; i++))
 125 do
 126     sim_print $RIC_SIM_PREFIX"_g3_"$i interface
 127 done
 128 # Load the polictypes in std
 129 for ((i=1; i<=$STD_NUM_RICS; i++))
 130 do
 131     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 demo-testdata/STD2/sim_qos.json
 132     sim_put_policy_type 201 $RIC_SIM_PREFIX"_g3_"$i STD_QOS2_0.1.0 demo-testdata/STD2/sim_qos2.json
 133 done
 134
 135 #Check the number of schemas and the individual schemas in STD
 136 a1pms_equal json:policy-types 2 120
 137
 138 for ((i=1; i<=$STD_NUM_RICS; i++))
 139 do
 140     a1pms_equal json:policy-types?ric_id=$RIC_SIM_PREFIX"_g3_"$i 2 120
 141 done
 142
 143 # Check the schemas in STD
 144 for ((i=1; i<=$STD_NUM_RICS; i++))
 145 do
 146     a1pms_api_get_policy_type 200 STD_QOS_0_2_0 demo-testdata/STD2/qos-a1pms-modified.json
 147     a1pms_api_get_policy_type 200 'STD_QOS2_0.1.0' demo-testdata/STD2/qos2-a1pms-modified.json
 148 done
 149
 150 #Check the number of types
 151 a1pms_equal json:policy-types 2 300
 152
 153 a1pms_api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH_0/1"
 154
 155 # Create policies in STD
 156 for ((i=1; i<=$STD_NUM_RICS; i++))
 157 do
 158     generate_policy_uuid
 159     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 160     generate_policy_uuid
 161     a1pms_api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 162 done
 163
 164
 165 # Check the number of policies in STD
 166 for ((i=1; i<=$STD_NUM_RICS; i++))
 167 do
 168     sim_equal $RIC_SIM_PREFIX"_g3_"$i num_instances 2
 169 done
 170
 171 # Print calling hosts STD 2.X
 172 for ((i=1; i<=$STD_NUM_RICS; i++))
 173 do
 174     sim_print $RIC_SIM_PREFIX"_g3_"$i remote_hosts
 175 done
 176
 177 FLAT_A1_EI="1"
 178
 179 CB_JOB="$PROD_STUB_SERVICE_PATH$PROD_STUB_JOB_CALLBACK"
 180 CB_SV="$PROD_STUB_SERVICE_PATH$PROD_STUB_SUPERVISION_CALLBACK"
 181 RIC_G1_1=$RIC_SIM_PREFIX"_g3_1"
 182 RIC_G1_2=$RIC_SIM_PREFIX"_g3_2"
 183 if [ $RUNMODE == "KUBE" ]; then
 184     RIC_G1_1=$(get_kube_sim_host $RIC_G1_1)
 185     RIC_G1_2=$(get_kube_sim_host $RIC_G1_2)
 186 fi
 187 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 188 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 189
 190 STATUS1="$CR_SERVICE_APP_PATH_0/callbacks/job1-status"
 191 STATUS2="$CR_SERVICE_APP_PATH_0/callbacks/job2-status"
 192
 193 prodstub_arm_producer 200 prod-a
 194 prodstub_arm_type 200 prod-a type1
 195 prodstub_arm_job_create 200 prod-a job1
 196 prodstub_arm_job_create 200 prod-a job2
 197
 198 ### ics status
 199 ics_api_service_status 200
 200
 201 ## Setup prod-a
 202 if [ $ICS_VERSION == "V1-1" ]; then
 203     ics_api_edp_put_producer 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 204
 205     ics_api_edp_get_producer 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1 testdata/ics/ei-type-1.json
 206 else
 207     ics_api_edp_put_type_2 201 type1 testdata/ics/ei-type-1.json
 208
 209     ics_api_edp_put_producer_2 201 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 210
 211     ics_api_edp_get_producer_2 200 prod-a $CB_JOB/prod-a $CB_SV/prod-a type1
 212 fi
 213
 214 ics_api_edp_get_producer_status 200 prod-a ENABLED
 215
 216
 217 ## Create a job for prod-a
 218 ## job1 - prod-a
 219 if [  -z "$FLAT_A1_EI" ]; then
 220     ics_api_a1_put_job 201 type1 job1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 221 else
 222     ics_api_a1_put_job 201 job1 type1 $TARGET1 ricsim_g3_1 $STATUS1 testdata/ics/job-template.json
 223 fi
 224
 225 # Check the job data in the producer
 226 if [ $ICS_VERSION == "V1-1" ]; then
 227     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 228 else
 229     if [ $use_info_jobs ]; then
 230         prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 231     else
 232         prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ics/job-template.json
 233     fi
 234 fi
 235
 236
 237 ## Create a second job for prod-a
 238 ## job2 - prod-a
 239 if [  -z "$FLAT_A1_EI" ]; then
 240     ics_api_a1_put_job 201 type1 job2 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 241 else
 242     ics_api_a1_put_job 201 job2 type1 $TARGET2 ricsim_g3_2 $STATUS2 testdata/ics/job-template.json
 243 fi
 244
 245 # Check the job data in the producer
 246 if [ $ICS_VERSION == "V1-1" ]; then
 247     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 248 else
 249     if [ $use_info_jobs ]; then
 250         prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 251     else
 252         prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ics/job-template.json
 253     fi
 254 fi
 255
 256 check_a1pms_logs
 257 check_ics_logs
 258 check_sdnc_logs
 259
 260 #### TEST COMPLETE ####
 261
 262 store_logs          END
 263
 264 print_result
 265
 266 auto_clean_environment