New test profile
[nonrtric.git] / test / auto-test / FTC800.sh
1 #!/bin/bash
2
3 #  ============LICENSE_START===============================================
4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
5 #  ========================================================================
6 #  Licensed under the Apache License, Version 2.0 (the "License");
7 #  you may not use this file except in compliance with the License.
8 #  You may obtain a copy of the License at
9 #
10 #       http://www.apache.org/licenses/LICENSE-2.0
11 #
12 #  Unless required by applicable law or agreed to in writing, software
13 #  distributed under the License is distributed on an "AS IS" BASIS,
14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 #  See the License for the specific language governing permissions and
16 #  limitations under the License.
17 #  ============LICENSE_END=================================================
18 #
19
20 TC_ONELINE_DESCR="Create 10000 policies in sequence using http/https and a1pms REST/DMAAP with/without SDNC controller"
21
22 #App names to include in the test when running docker, space separated list
23 DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR A1PMS RICSIM SDNC NGW KUBEPROXY"
24
25 #App names to include in the test when running kubernetes, space separated list
26 KUBE_INCLUDED_IMAGES="CP CR MR A1PMS RICSIM SDNC KUBEPROXY NGW"
27 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
28 KUBE_PRESTARTED_IMAGES=""
29
30 #Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
31 #the image is not configured in the supplied env_file
32 #Used for images not applicable to all supported profile
33 CONDITIONALLY_IGNORED_IMAGES="CBS CONSUL NGW"
34
35 #Supported test environment profiles
36 SUPPORTED_PROFILES="ONAP-GUILIN ONAP-HONOLULU ONAP-ISTANBUL ONAP-JAKARTA ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE ORAN-F-RELEASE"
37 #Supported run modes
38 SUPPORTED_RUNMODES="DOCKER KUBE"
39
40 . ../common/testcase_common.sh $@
41
42 setup_testenvironment
43
44 #### TEST BEGIN ####
45
46 generate_policy_uuid
47
48 #Local vars in test script
49 ##########################
50 # Number of policies in each sequence
51 NUM_POLICIES=10000
52
53 # Tested variants of REST/DMAAP/SDNC config
54 TESTED_VARIANTS="NOSDNC   SDNC"
55
56 #Test a1pms and simulator protocol versions (others are http only)
57 TESTED_PROTOCOLS="HTTP HTTPS"
58
59 for __httpx in $TESTED_PROTOCOLS ; do
60     for interface in $TESTED_VARIANTS ; do
61
62         echo "#####################################################################"
63         echo "#####################################################################"
64         echo "### Testing a1pms via $interface using $__httpx"
65         echo "#####################################################################"
66         echo "#####################################################################"
67
68         if [ $__httpx == "HTTPS" ]; then
69             use_cr_https
70             use_simulator_https
71             use_mr_https
72             use_a1pms_rest_https
73         else
74             use_cr_http
75             use_simulator_http
76             use_mr_http
77             use_a1pms_rest_http
78         fi
79
80         # Policy instance start id
81         START_ID=1
82
83         clean_environment
84
85         start_kube_proxy
86
87         start_ric_simulators ricsim_g1 1 OSC_2.1.0
88         start_ric_simulators ricsim_g2 1 STD_1.1.3
89         if [ "$A1PMS_VERSION" == "V2" ]; then
90             start_ric_simulators ricsim_g3 1  STD_2.0.0
91         fi
92
93         start_mr
94
95         start_cr 1
96
97         start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
98
99         if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
100             start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
101         fi
102
103         start_a1pms NORPOXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
104
105         set_a1pms_debug
106
107         mr_equal requests_submitted 0
108
109         sim_put_policy_type 201 ricsim_g1_1 1 testdata/OSC/sim_1.json
110         if [ "$A1PMS_VERSION" == "V2" ]; then
111             sim_put_policy_type 201 ricsim_g3_1 STD_QOS2_0.1.0 testdata/STD2/sim_qos2.json
112         fi
113
114         __CONFIG_HEADER="NOHEADER"
115         if [ $RUNMODE == "KUBE" ]; then
116             __CONFIG_HEADER="HEADER"
117         else
118             if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
119             __CONFIG_HEADER="HEADER"
120             fi
121         fi
122         if [[ $interface == "SDNC" ]]; then
123             start_sdnc
124             prepare_consul_config      SDNC    ".consul_config.json" $__CONFIG_HEADER
125         else
126             prepare_consul_config      NOSDNC  ".consul_config.json" $__CONFIG_HEADER
127         fi
128
129         if [ $RUNMODE == "KUBE" ]; then
130             a1pms_load_config                       ".consul_config.json"
131         else
132             if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
133                 a1pms_api_put_configuration 200 ".consul_config.json"
134             else
135                 start_consul_cbs
136                 consul_config_app                   ".consul_config.json"
137             fi
138         fi
139
140         a1pms_api_get_status 200
141
142         sim_print ricsim_g1_1 interface
143         sim_print ricsim_g2_1 interface
144         if [ "$A1PMS_VERSION" == "V2" ]; then
145             sim_print ricsim_g3_1 interface
146         fi
147
148         if [ "$A1PMS_VERSION" == "V2" ]; then
149             a1pms_equal json:policy-types 3 300  #Wait for the a1pms to refresh types from the simulators
150         else
151             a1pms_equal json:policy_types 2 300  #Wait for the a1pms to refresh types from the simulators
152         fi
153
154         a1pms_api_put_service 201 "serv1" 3600 "$CR_SERVICE_APP_PATH_0/1"
155
156         if [ "$A1PMS_VERSION" == "V2" ]; then
157             notificationurl=$CR_SERVICE_APP_PATH_0"/test"
158         else
159             notificationurl=""
160         fi
161
162         start_timer "Create polices in OSC via a1pms REST and $interface using "$__httpx
163         a1pms_api_put_policy 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
164         print_timer "Create polices in OSC via a1pms REST and $interface using "$__httpx
165
166         sim_equal ricsim_g1_1 num_instances $NUM_POLICIES
167
168         START_ID=$(($START_ID+$NUM_POLICIES))
169
170         start_timer "Create polices in STD via a1pms REST and $interface using "$__httpx
171         a1pms_api_put_policy 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
172         print_timer "Create polices in STD via a1pms REST and $interface using "$__httpx
173
174         sim_equal ricsim_g2_1 num_instances $NUM_POLICIES
175
176         if [ "$A1PMS_VERSION" == "V2" ]; then
177
178             START_ID=$(($START_ID+$NUM_POLICIES))
179
180             start_timer "Create polices in STD 2 via a1pms REST and $interface using "$__httpx
181             a1pms_api_put_policy 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
182             print_timer "Create polices in STD via a1pms REST and $interface using "$__httpx
183
184             sim_equal ricsim_g3_1 num_instances $NUM_POLICIES
185         fi
186
187         if [ $__httpx == "HTTPS" ]; then
188             echo "Using secure ports towards dmaap"
189             use_a1pms_dmaap_https
190         else
191             echo "Using non-secure ports towards dmaap"
192             use_a1pms_dmaap_http
193         fi
194
195         START_ID=$(($START_ID+$NUM_POLICIES))
196
197         start_timer "Create polices in OSC via a1pms DMAAP, one by one, and $interface using "$__httpx
198         a1pms_api_put_policy 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
199         print_timer "Create polices in OSC via a1pms DMAAP, one by one, and $interface using "$__httpx
200
201         sim_equal ricsim_g1_1 num_instances $((2*$NUM_POLICIES))
202
203         START_ID=$(($START_ID+$NUM_POLICIES))
204
205         start_timer "Create polices in STD via a1pms DMAAP, one by one, and $interface using "$__httpx
206         a1pms_api_put_policy 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
207         print_timer "Create polices in STD via a1pms DMAAP, one by one, and $interface using "$__httpx
208
209         sim_equal ricsim_g2_1 num_instances $((2*$NUM_POLICIES))
210
211         if [ "$A1PMS_VERSION" == "V2" ]; then
212
213             START_ID=$(($START_ID+$NUM_POLICIES))
214
215             start_timer "Create polices in STD 2 via a1pms DMAAP, one by one, and $interface using "$__httpx
216             a1pms_api_put_policy 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
217             print_timer "Create polices in STD via a1pms DMAAP, one by one, and $interface using "$__httpx
218
219             sim_equal ricsim_g3_1 num_instances $((2*$NUM_POLICIES))
220         fi
221
222         START_ID=$(($START_ID+$NUM_POLICIES))
223
224         start_timer "Create polices in OSC via a1pms DMAAP in batch and $interface using "$__httpx
225         a1pms_api_put_policy_batch 201 "serv1" ricsim_g1_1 1 $START_ID NOTRANSIENT $notificationurl testdata/OSC/pi1_template.json $NUM_POLICIES
226         print_timer "Create polices in OSC via a1pms DMAAP in batch and $interface using "$__httpx
227
228         sim_equal ricsim_g1_1 num_instances $((3*$NUM_POLICIES))
229
230         START_ID=$(($START_ID+$NUM_POLICIES))
231
232         start_timer "Create polices in STD via a1pms DMAAP in batch and $interface using "$__httpx
233         a1pms_api_put_policy_batch 201 "serv1" ricsim_g2_1 NOTYPE $START_ID NOTRANSIENT $notificationurl testdata/STD/pi1_template.json $NUM_POLICIES
234         print_timer "Create polices in STD via a1pms DMAAP in batch and $interface using "$__httpx
235
236         sim_equal ricsim_g2_1 num_instances $((3*$NUM_POLICIES))
237
238         if [ "$A1PMS_VERSION" == "V2" ]; then
239
240             START_ID=$(($START_ID+$NUM_POLICIES))
241
242             start_timer "Create polices in STD via a1pms DMAAP in batch and $interface using "$__httpx
243             a1pms_api_put_policy_batch 201 "serv1" ricsim_g3_1 STD_QOS2_0.1.0 $START_ID NOTRANSIENT $notificationurl testdata/STD2/pi_qos2_template.json $NUM_POLICIES
244             print_timer "Create polices in STD via a1pms DMAAP in batch and $interface using "$__httpx
245
246             sim_equal ricsim_g3_1 num_instances $((3*$NUM_POLICIES))
247         fi
248
249         if [ $interface == "SDNC" ]; then
250             sim_contains_str ricsim_g1_1 remote_hosts $SDNC_APP_NAME
251             sim_contains_str ricsim_g2_1 remote_hosts $SDNC_APP_NAME
252             if [ "$A1PMS_VERSION" == "V2" ]; then
253                 sim_contains_str ricsim_g3_1 remote_hosts $SDNC_APP_NAME
254             fi
255         else
256             sim_contains_str ricsim_g1_1 remote_hosts $A1PMS_APP_NAME
257             sim_contains_str ricsim_g2_1 remote_hosts $A1PMS_APP_NAME
258             if [ "$A1PMS_VERSION" == "V2" ]; then
259                 sim_contains_str ricsim_g3_1 remote_hosts $A1PMS_APP_NAME
260             fi
261         fi
262
263         check_a1pms_logs
264         if [[ $interface = *"SDNC"* ]]; then
265             check_sdnc_logs
266         fi
267
268         store_logs          "${__httpx}__${interface}"
269     done
270 done
271
272 #### TEST COMPLETE ####
273
274 print_result
275
276 auto_clean_environment